Commit 7064f623 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'ccn/fixes-for-4.8-v2' of git://git.linaro.org/people/pawel.moll/linux into fixes

Merge "bus: ARM CCN PMU driver updates" from Paweł Moll:

- Fixes and improvements for XP watchpoint and events handling
- Added missing condition checks for KVM-related exclusions
- Improved interrupt affinity handling
- Fix for hrtimer use in polling mode
- Event grouping implementation improvement

* tag 'ccn/fixes-for-4.8-v2' of git://git.linaro.org/people/pawel.moll/linux:
  bus: arm-ccn: make event groups reliable
  bus: arm-ccn: fix hrtimer registration
  bus: arm-ccn: fix PMU interrupt flags
  bus: arm-ccn: Add missing event attribute exclusions for host/guest
  bus: arm-ccn: Correct required arguments for XP PMU events
  bus: arm-ccn: Fix XP watchpoint settings bitmask
  bus: arm-ccn: Do not attempt to configure XPs for cycle counter
  bus: arm-ccn: Fix PMU handling of MN
parents 982098a9 d662ed2e
......@@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
directory provides configuration templates for all documented
events, that can be used with perf tool. For example "xp_valid_flit"
is an equivalent of "type=0x8,event=0x4". Other parameters must be
explicitly specified. For events originating from device, "node"
defines its index. All crosspoint events require "xp" (index),
"port" (device port number) and "vc" (virtual channel ID) and
"dir" (direction). Watchpoints (special "event" value 0xfe) also
require comparator values ("cmp_l" and "cmp_h") and "mask", being
index of the comparator mask.
explicitly specified.
For events originating from device, "node" defines its index.
Crosspoint PMU events require "xp" (index), "bus" (bus number)
and "vc" (virtual channel ID).
Crosspoint watchpoint-based events (special "event" value 0xfe)
require "xp" and "vc" as as above plus "port" (device port index),
"dir" (transmit/receive direction), comparator values ("cmp_l"
and "cmp_h") and "mask", being index of the comparator mask.
Masks are defined separately from the event description
(due to limited number of the config values) in the "cmp_mask"
directory, with first 8 configurable by user and additional
......
......@@ -187,6 +187,7 @@ struct arm_ccn {
struct arm_ccn_component *xp;
struct arm_ccn_dt dt;
int mn_id;
};
static DEFINE_MUTEX(arm_ccn_mutex);
......@@ -212,6 +213,7 @@ static int arm_ccn_node_to_xp_port(int node)
#define CCN_CONFIG_TYPE(_config) (((_config) >> 8) & 0xff)
#define CCN_CONFIG_EVENT(_config) (((_config) >> 16) & 0xff)
#define CCN_CONFIG_PORT(_config) (((_config) >> 24) & 0x3)
#define CCN_CONFIG_BUS(_config) (((_config) >> 24) & 0x3)
#define CCN_CONFIG_VC(_config) (((_config) >> 26) & 0x7)
#define CCN_CONFIG_DIR(_config) (((_config) >> 29) & 0x1)
#define CCN_CONFIG_MASK(_config) (((_config) >> 30) & 0xf)
......@@ -241,6 +243,7 @@ static CCN_FORMAT_ATTR(xp, "config:0-7");
static CCN_FORMAT_ATTR(type, "config:8-15");
static CCN_FORMAT_ATTR(event, "config:16-23");
static CCN_FORMAT_ATTR(port, "config:24-25");
static CCN_FORMAT_ATTR(bus, "config:24-25");
static CCN_FORMAT_ATTR(vc, "config:26-28");
static CCN_FORMAT_ATTR(dir, "config:29-29");
static CCN_FORMAT_ATTR(mask, "config:30-33");
......@@ -253,6 +256,7 @@ static struct attribute *arm_ccn_pmu_format_attrs[] = {
&arm_ccn_pmu_format_attr_type.attr.attr,
&arm_ccn_pmu_format_attr_event.attr.attr,
&arm_ccn_pmu_format_attr_port.attr.attr,
&arm_ccn_pmu_format_attr_bus.attr.attr,
&arm_ccn_pmu_format_attr_vc.attr.attr,
&arm_ccn_pmu_format_attr_dir.attr.attr,
&arm_ccn_pmu_format_attr_mask.attr.attr,
......@@ -328,6 +332,7 @@ struct arm_ccn_pmu_event {
static ssize_t arm_ccn_pmu_event_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
struct arm_ccn_pmu_event *event = container_of(attr,
struct arm_ccn_pmu_event, attr);
ssize_t res;
......@@ -349,10 +354,17 @@ static ssize_t arm_ccn_pmu_event_show(struct device *dev,
break;
case CCN_TYPE_XP:
res += snprintf(buf + res, PAGE_SIZE - res,
",xp=?,port=?,vc=?,dir=?");
",xp=?,vc=?");
if (event->event == CCN_EVENT_WATCHPOINT)
res += snprintf(buf + res, PAGE_SIZE - res,
",cmp_l=?,cmp_h=?,mask=?");
",port=?,dir=?,cmp_l=?,cmp_h=?,mask=?");
else
res += snprintf(buf + res, PAGE_SIZE - res,
",bus=?");
break;
case CCN_TYPE_MN:
res += snprintf(buf + res, PAGE_SIZE - res, ",node=%d", ccn->mn_id);
break;
default:
res += snprintf(buf + res, PAGE_SIZE - res, ",node=?");
......@@ -383,9 +395,9 @@ static umode_t arm_ccn_pmu_events_is_visible(struct kobject *kobj,
}
static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = {
CCN_EVENT_MN(eobarrier, "dir=0,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(ecbarrier, "dir=0,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(dvmop, "dir=0,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(eobarrier, "dir=1,vc=0,cmp_h=0x1c00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(ecbarrier, "dir=1,vc=0,cmp_h=0x1e00", CCN_IDX_MASK_OPCODE),
CCN_EVENT_MN(dvmop, "dir=1,vc=0,cmp_h=0x2800", CCN_IDX_MASK_OPCODE),
CCN_EVENT_HNI(txdatflits, "dir=1,vc=3", CCN_IDX_MASK_ANY),
CCN_EVENT_HNI(rxdatflits, "dir=0,vc=3", CCN_IDX_MASK_ANY),
CCN_EVENT_HNI(txreqflits, "dir=1,vc=0", CCN_IDX_MASK_ANY),
......@@ -733,9 +745,10 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
if (has_branch_stack(event) || event->attr.exclude_user ||
event->attr.exclude_kernel || event->attr.exclude_hv ||
event->attr.exclude_idle) {
event->attr.exclude_idle || event->attr.exclude_host ||
event->attr.exclude_guest) {
dev_warn(ccn->dev, "Can't exclude execution levels!\n");
return -EOPNOTSUPP;
return -EINVAL;
}
if (event->cpu < 0) {
......@@ -759,6 +772,12 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
/* Validate node/xp vs topology */
switch (type) {
case CCN_TYPE_MN:
if (node_xp != ccn->mn_id) {
dev_warn(ccn->dev, "Invalid MN ID %d!\n", node_xp);
return -EINVAL;
}
break;
case CCN_TYPE_XP:
if (node_xp >= ccn->num_xps) {
dev_warn(ccn->dev, "Invalid XP ID %d!\n", node_xp);
......@@ -886,6 +905,10 @@ static void arm_ccn_pmu_xp_dt_config(struct perf_event *event, int enable)
struct arm_ccn_component *xp;
u32 val, dt_cfg;
/* Nothing to do for cycle counter */
if (hw->idx == CCN_IDX_PMU_CYCLE_COUNTER)
return;
if (CCN_CONFIG_TYPE(event->attr.config) == CCN_TYPE_XP)
xp = &ccn->xp[CCN_CONFIG_XP(event->attr.config)];
else
......@@ -917,38 +940,17 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags)
arm_ccn_pmu_read_counter(ccn, hw->idx));
hw->state = 0;
/*
* Pin the timer, so that the overflows are handled by the chosen
* event->cpu (this is the same one as presented in "cpumask"
* attribute).
*/
if (!ccn->irq)
hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
HRTIMER_MODE_REL_PINNED);
/* Set the DT bus input, engaging the counter */
arm_ccn_pmu_xp_dt_config(event, 1);
}
static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
struct hw_perf_event *hw = &event->hw;
u64 timeout;
/* Disable counting, setting the DT bus to pass-through mode */
arm_ccn_pmu_xp_dt_config(event, 0);
if (!ccn->irq)
hrtimer_cancel(&ccn->dt.hrtimer);
/* Let the DT bus drain */
timeout = arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) +
ccn->num_xps;
while (arm_ccn_pmu_read_counter(ccn, CCN_IDX_PMU_CYCLE_COUNTER) <
timeout)
cpu_relax();
if (flags & PERF_EF_UPDATE)
arm_ccn_pmu_event_update(event);
......@@ -988,7 +990,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event)
/* Comparison values */
writel(cmp_l & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_L(wp));
writel((cmp_l >> 32) & 0xefffffff,
writel((cmp_l >> 32) & 0x7fffffff,
source->base + CCN_XP_DT_CMP_VAL_L(wp) + 4);
writel(cmp_h & 0xffffffff, source->base + CCN_XP_DT_CMP_VAL_H(wp));
writel((cmp_h >> 32) & 0x0fffffff,
......@@ -996,7 +998,7 @@ static void arm_ccn_pmu_xp_watchpoint_config(struct perf_event *event)
/* Mask */
writel(mask_l & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_L(wp));
writel((mask_l >> 32) & 0xefffffff,
writel((mask_l >> 32) & 0x7fffffff,
source->base + CCN_XP_DT_CMP_MASK_L(wp) + 4);
writel(mask_h & 0xffffffff, source->base + CCN_XP_DT_CMP_MASK_H(wp));
writel((mask_h >> 32) & 0x0fffffff,
......@@ -1014,7 +1016,7 @@ static void arm_ccn_pmu_xp_event_config(struct perf_event *event)
hw->event_base = CCN_XP_DT_CONFIG__DT_CFG__XP_PMU_EVENT(hw->config_base);
id = (CCN_CONFIG_VC(event->attr.config) << 4) |
(CCN_CONFIG_PORT(event->attr.config) << 3) |
(CCN_CONFIG_BUS(event->attr.config) << 3) |
(CCN_CONFIG_EVENT(event->attr.config) << 0);
val = readl(source->base + CCN_XP_PMU_EVENT_SEL);
......@@ -1099,15 +1101,31 @@ static void arm_ccn_pmu_event_config(struct perf_event *event)
spin_unlock(&ccn->dt.config_lock);
}
static int arm_ccn_pmu_active_counters(struct arm_ccn *ccn)
{
return bitmap_weight(ccn->dt.pmu_counters_mask,
CCN_NUM_PMU_EVENT_COUNTERS + 1);
}
static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
{
int err;
struct hw_perf_event *hw = &event->hw;
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
err = arm_ccn_pmu_event_alloc(event);
if (err)
return err;
/*
* Pin the timer, so that the overflows are handled by the chosen
* event->cpu (this is the same one as presented in "cpumask"
* attribute).
*/
if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 1)
hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
HRTIMER_MODE_REL_PINNED);
arm_ccn_pmu_event_config(event);
hw->state = PERF_HES_STOPPED;
......@@ -1120,9 +1138,14 @@ static int arm_ccn_pmu_event_add(struct perf_event *event, int flags)
static void arm_ccn_pmu_event_del(struct perf_event *event, int flags)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(event->pmu);
arm_ccn_pmu_event_stop(event, PERF_EF_UPDATE);
arm_ccn_pmu_event_release(event);
if (!ccn->irq && arm_ccn_pmu_active_counters(ccn) == 0)
hrtimer_cancel(&ccn->dt.hrtimer);
}
static void arm_ccn_pmu_event_read(struct perf_event *event)
......@@ -1130,6 +1153,24 @@ static void arm_ccn_pmu_event_read(struct perf_event *event)
arm_ccn_pmu_event_update(event);
}
static void arm_ccn_pmu_enable(struct pmu *pmu)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
val |= CCN_DT_PMCR__PMU_EN;
writel(val, ccn->dt.base + CCN_DT_PMCR);
}
static void arm_ccn_pmu_disable(struct pmu *pmu)
{
struct arm_ccn *ccn = pmu_to_arm_ccn(pmu);
u32 val = readl(ccn->dt.base + CCN_DT_PMCR);
val &= ~CCN_DT_PMCR__PMU_EN;
writel(val, ccn->dt.base + CCN_DT_PMCR);
}
static irqreturn_t arm_ccn_pmu_overflow_handler(struct arm_ccn_dt *dt)
{
u32 pmovsr = readl(dt->base + CCN_DT_PMOVSR);
......@@ -1252,6 +1293,8 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
.start = arm_ccn_pmu_event_start,
.stop = arm_ccn_pmu_event_stop,
.read = arm_ccn_pmu_event_read,
.pmu_enable = arm_ccn_pmu_enable,
.pmu_disable = arm_ccn_pmu_disable,
};
/* No overflow interrupt? Have to use a timer instead. */
......@@ -1361,6 +1404,8 @@ static int arm_ccn_init_nodes(struct arm_ccn *ccn, int region,
switch (type) {
case CCN_TYPE_MN:
ccn->mn_id = id;
return 0;
case CCN_TYPE_DT:
return 0;
case CCN_TYPE_XP:
......@@ -1471,7 +1516,8 @@ static int arm_ccn_probe(struct platform_device *pdev)
/* Can set 'disable' bits, so can acknowledge interrupts */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
ccn->base + CCN_MN_ERRINT_STATUS);
err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler,
IRQF_NOBALANCING | IRQF_NO_THREAD,
dev_name(ccn->dev), ccn);
if (err)
return err;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment