Commit 70c6cce0 authored by Qiao Zhou's avatar Qiao Zhou Committed by Samuel Ortiz

mfd: Support 88pm80x in 80x driver

88PM800 and 88PM805 are two discrete chips used for power management.
Hardware designer can use them together or only one of them according
to requirement.

88pm80x.c provides common i2c driver handling for both 800 and
805, such as i2c_driver init, regmap init, read/write api etc.

88pm800.c handles specifically for 800, such as chip init, irq
init/handle, mfd device register, including rtc, onkey, regulator(
to be add later) etc. besides that, 800 has three i2c device, one
regular i2c client, two other i2c dummy for gpadc and power purpose.

88pm805.c handles specifically for 805, such as chip init, irq
init/handle, mfd device register, including codec, headset/mic detect
etc.

the i2c operation of both 800 and 805 are via regmap, and 88pm80x-i2c
exported a group of r/w bulk r/w and bits set API for facility.
Signed-off-by: default avatarQiao Zhou <zhouqiao@marvell.com>
Reviewed-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 49003a68
This diff is collapsed.
/*
* Base driver for Marvell 88PM805
*
* Copyright (C) 2012 Marvell International Ltd.
* Haojian Zhuang <haojian.zhuang@marvell.com>
* Joseph(Yossi) Hanin <yhanin@marvell.com>
* Qiao Zhou <zhouqiao@marvell.com>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/mfd/88pm80x.h>
#include <linux/slab.h>
#include <linux/delay.h>
#define PM805_CHIP_ID (0x00)
static const struct i2c_device_id pm80x_id_table[] = {
{"88PM805", CHIP_PM805},
};
MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
/* Interrupt Number in 88PM805 */
enum {
PM805_IRQ_LDO_OFF, /*0 */
PM805_IRQ_SRC_DPLL_LOCK, /*1 */
PM805_IRQ_CLIP_FAULT,
PM805_IRQ_MIC_CONFLICT,
PM805_IRQ_HP2_SHRT,
PM805_IRQ_HP1_SHRT, /*5 */
PM805_IRQ_FINE_PLL_FAULT,
PM805_IRQ_RAW_PLL_FAULT,
PM805_IRQ_VOLP_BTN_DET,
PM805_IRQ_VOLM_BTN_DET,
PM805_IRQ_SHRT_BTN_DET, /*10 */
PM805_IRQ_MIC_DET, /*11 */
PM805_MAX_IRQ,
};
static struct resource codec_resources[] = {
{
/* Headset microphone insertion or removal */
.name = "micin",
.start = PM805_IRQ_MIC_DET,
.end = PM805_IRQ_MIC_DET,
.flags = IORESOURCE_IRQ,
},
{
/* Audio short HP1 */
.name = "audio-short1",
.start = PM805_IRQ_HP1_SHRT,
.end = PM805_IRQ_HP1_SHRT,
.flags = IORESOURCE_IRQ,
},
{
/* Audio short HP2 */
.name = "audio-short2",
.start = PM805_IRQ_HP2_SHRT,
.end = PM805_IRQ_HP2_SHRT,
.flags = IORESOURCE_IRQ,
},
};
static struct mfd_cell codec_devs[] = {
{
.name = "88pm80x-codec",
.num_resources = ARRAY_SIZE(codec_resources),
.resources = &codec_resources[0],
.id = -1,
},
};
static struct regmap_irq pm805_irqs[] = {
/* INT0 */
[PM805_IRQ_LDO_OFF] = {
.mask = PM805_INT1_HP1_SHRT,
},
[PM805_IRQ_SRC_DPLL_LOCK] = {
.mask = PM805_INT1_HP2_SHRT,
},
[PM805_IRQ_CLIP_FAULT] = {
.mask = PM805_INT1_MIC_CONFLICT,
},
[PM805_IRQ_MIC_CONFLICT] = {
.mask = PM805_INT1_CLIP_FAULT,
},
[PM805_IRQ_HP2_SHRT] = {
.mask = PM805_INT1_LDO_OFF,
},
[PM805_IRQ_HP1_SHRT] = {
.mask = PM805_INT1_SRC_DPLL_LOCK,
},
/* INT1 */
[PM805_IRQ_FINE_PLL_FAULT] = {
.reg_offset = 1,
.mask = PM805_INT2_MIC_DET,
},
[PM805_IRQ_RAW_PLL_FAULT] = {
.reg_offset = 1,
.mask = PM805_INT2_SHRT_BTN_DET,
},
[PM805_IRQ_VOLP_BTN_DET] = {
.reg_offset = 1,
.mask = PM805_INT2_VOLM_BTN_DET,
},
[PM805_IRQ_VOLM_BTN_DET] = {
.reg_offset = 1,
.mask = PM805_INT2_VOLP_BTN_DET,
},
[PM805_IRQ_SHRT_BTN_DET] = {
.reg_offset = 1,
.mask = PM805_INT2_RAW_PLL_FAULT,
},
[PM805_IRQ_MIC_DET] = {
.reg_offset = 1,
.mask = PM805_INT2_FINE_PLL_FAULT,
},
};
static int __devinit device_irq_init_805(struct pm80x_chip *chip)
{
struct regmap *map = chip->regmap;
unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
int data, mask, ret = -EINVAL;
if (!map || !chip->irq) {
dev_err(chip->dev, "incorrect parameters\n");
return -EINVAL;
}
/*
* irq_mode defines the way of clearing interrupt. it's read-clear by
* default.
*/
mask =
PM805_STATUS0_INT_CLEAR | PM805_STATUS0_INV_INT |
PM800_STATUS0_INT_MASK;
data = PM805_STATUS0_INT_CLEAR;
ret = regmap_update_bits(map, PM805_INT_STATUS0, mask, data);
/*
* PM805_INT_STATUS is under 32K clock domain, so need to
* add proper delay before the next I2C register access.
*/
msleep(1);
if (ret < 0)
goto out;
ret =
regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1,
chip->regmap_irq_chip, &chip->irq_data);
out:
return ret;
}
static void device_irq_exit_805(struct pm80x_chip *chip)
{
regmap_del_irq_chip(chip->irq, chip->irq_data);
}
static struct regmap_irq_chip pm805_irq_chip = {
.name = "88pm805",
.irqs = pm805_irqs,
.num_irqs = ARRAY_SIZE(pm805_irqs),
.num_regs = 2,
.status_base = PM805_INT_STATUS1,
.mask_base = PM805_INT_MASK1,
.ack_base = PM805_INT_STATUS1,
};
static int __devinit device_805_init(struct pm80x_chip *chip)
{
int ret = 0;
struct regmap *map = chip->regmap;
if (!map) {
dev_err(chip->dev, "regmap is invalid\n");
return -EINVAL;
}
regmap_read(map, PM805_CHIP_ID, &ret);
if (ret < 0) {
dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret);
goto out_irq_init;
}
chip->version = ret;
chip->regmap_irq_chip = &pm805_irq_chip;
ret = device_irq_init_805(chip);
if (ret < 0) {
dev_err(chip->dev, "Failed to init pm805 irq!\n");
goto out_irq_init;
}
ret = mfd_add_devices(chip->dev, 0, &codec_devs[0],
ARRAY_SIZE(codec_devs), &codec_resources[0], 0);
if (ret < 0) {
dev_err(chip->dev, "Failed to add codec subdev\n");
goto out_codec;
} else
dev_info(chip->dev, "[%s]:Added mfd codec_devs\n", __func__);
return 0;
out_codec:
device_irq_exit_805(chip);
out_irq_init:
return ret;
}
static int __devinit pm805_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret = 0;
struct pm80x_chip *chip;
struct pm80x_platform_data *pdata = client->dev.platform_data;
ret = pm80x_init(client, id);
if (ret) {
dev_err(&client->dev, "pm805_init fail!\n");
goto out_init;
}
chip = i2c_get_clientdata(client);
ret = device_805_init(chip);
if (ret) {
dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id);
goto err_805_init;
}
if (pdata->plat_config)
pdata->plat_config(chip, pdata);
err_805_init:
pm80x_deinit(client);
out_init:
return ret;
}
static int __devexit pm805_remove(struct i2c_client *client)
{
struct pm80x_chip *chip = i2c_get_clientdata(client);
mfd_remove_devices(chip->dev);
device_irq_exit_805(chip);
pm80x_deinit(client);
return 0;
}
static struct i2c_driver pm805_driver = {
.driver = {
.name = "88PM80X",
.owner = THIS_MODULE,
.pm = &pm80x_pm_ops,
},
.probe = pm805_probe,
.remove = __devexit_p(pm805_remove),
.id_table = pm80x_id_table,
};
static int __init pm805_i2c_init(void)
{
return i2c_add_driver(&pm805_driver);
}
subsys_initcall(pm805_i2c_init);
static void __exit pm805_i2c_exit(void)
{
i2c_del_driver(&pm805_driver);
}
module_exit(pm805_i2c_exit);
MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM805");
MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
MODULE_LICENSE("GPL");
/*
* I2C driver for Marvell 88PM80x
*
* Copyright (C) 2012 Marvell International Ltd.
* Haojian Zhuang <haojian.zhuang@marvell.com>
* Joseph(Yossi) Hanin <yhanin@marvell.com>
* Qiao Zhou <zhouqiao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/mfd/88pm80x.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/err.h>
const struct regmap_config pm80x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
int __devinit pm80x_init(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pm80x_chip *chip;
struct regmap *map;
int ret = 0;
chip =
devm_kzalloc(&client->dev, sizeof(struct pm80x_chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
map = devm_regmap_init_i2c(client, &pm80x_regmap_config);
if (IS_ERR(map)) {
ret = PTR_ERR(map);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
ret);
goto err_regmap_init;
}
chip->id = id->driver_data;
if (chip->id < CHIP_PM800 || chip->id > CHIP_PM805) {
ret = -EINVAL;
goto err_chip_id;
}
chip->client = client;
chip->regmap = map;
chip->irq = client->irq;
chip->dev = &client->dev;
dev_set_drvdata(chip->dev, chip);
i2c_set_clientdata(chip->client, chip);
device_init_wakeup(&client->dev, 1);
return 0;
err_chip_id:
regmap_exit(map);
err_regmap_init:
devm_kfree(&client->dev, chip);
return ret;
}
EXPORT_SYMBOL_GPL(pm80x_init);
int __devexit pm80x_deinit(struct i2c_client *client)
{
struct pm80x_chip *chip = i2c_get_clientdata(client);
regmap_exit(chip->regmap);
devm_kfree(&client->dev, chip);
return 0;
}
EXPORT_SYMBOL_GPL(pm80x_deinit);
#ifdef CONFIG_PM_SLEEP
static int pm80x_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
struct pm80x_chip *chip = i2c_get_clientdata(client);
if (chip && chip->wu_flag)
if (device_may_wakeup(chip->dev))
enable_irq_wake(chip->irq);
return 0;
}
static int pm80x_resume(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
struct pm80x_chip *chip = i2c_get_clientdata(client);
if (chip && chip->wu_flag)
if (device_may_wakeup(chip->dev))
disable_irq_wake(chip->irq);
return 0;
}
#endif
SIMPLE_DEV_PM_OPS(pm80x_pm_ops, pm80x_suspend, pm80x_resume);
EXPORT_SYMBOL_GPL(pm80x_pm_ops);
MODULE_DESCRIPTION("I2C Driver for Marvell 88PM80x");
MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>");
MODULE_LICENSE("GPL");
...@@ -21,6 +21,30 @@ config MFD_88PM860X ...@@ -21,6 +21,30 @@ config MFD_88PM860X
select individual components like voltage regulators, RTC and select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus. battery-charger under the corresponding menus.
config MFD_88PM800
tristate "Support Marvell 88PM800"
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
help
This supports for Marvell 88PM800 Power Management IC.
This includes the I2C driver and the core APIs _only_, you have to
select individual components like voltage regulators, RTC and
battery-charger under the corresponding menus.
config MFD_88PM805
tristate "Support Marvell 88PM805"
depends on I2C=y && GENERIC_HARDIRQS
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
help
This supports for Marvell 88PM805 Power Management IC. This includes
the I2C driver and the core APIs _only_, you have to select individual
components like codec device, headset/Mic device under the
corresponding menus.
config MFD_SM501 config MFD_SM501
tristate "Support for Silicon Motion SM501" tristate "Support for Silicon Motion SM501"
---help--- ---help---
......
...@@ -4,6 +4,8 @@ ...@@ -4,6 +4,8 @@
88pm860x-objs := 88pm860x-core.o 88pm860x-i2c.o 88pm860x-objs := 88pm860x-core.o 88pm860x-i2c.o
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o
obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o
obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment