Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "The first round of updates for the input subsystem.

  A few new drivers (power button handler for AXP20x PMIC, tps65218
  power button driver, sun4i keys driver, regulator haptic driver, NI
  Ettus Research USRP E3x0 button, Alwinner A10/A20 PS/2 controller).

  Updates to Synaptics and ALPS touchpad drivers (with more to come
  later), brand new Focaltech PS/2 support, update to Cypress driver to
  handle Gen5 (in addition to Gen3) devices, and number of other fixups
  to various drivers as well as input core"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: elan_i2c - fix wrong %p extension
  Input: evdev - do not queue SYN_DROPPED if queue is empty
  Input: gscps2 - fix MODULE_DEVICE_TABLE invocation
  Input: synaptics - use dmax in input_mt_assign_slots
  Input: pxa27x_keypad - remove unnecessary ARM includes
  Input: ti_am335x_tsc - replace delta filtering with median filtering
  ARM: dts: AM335x: Make charge delay a DT parameter for TSC
  Input: ti_am335x_tsc - read charge delay from DT
  Input: ti_am335x_tsc - remove udelay in interrupt handler
  Input: ti_am335x_tsc - interchange touchscreen and ADC steps
  Input: MT - add support for balanced slot assignment
  Input: drv2667 - remove wrong and unneeded drv2667-haptics modalias
  Input: drv260x - remove wrong and unneeded drv260x-haptics modalias
  Input: cap11xx - remove wrong and unneeded cap11xx modalias
  Input: sun4i-ts - add support for touchpanel controller on A31
  Input: serio - add support for Alwinner A10/A20 PS/2 controller
  Input: gtco - use sign_extend32() for sign extension
  Input: elan_i2c - verify firmware signature applying it
  Input: elantech - remove stale comment from Kconfig
  Input: cyapa - off by one in cyapa_update_fw_store()
  ...

Documentation/ABI/testing/sysfs-driver-input-axp-pek

+What:		/sys/class/input/input(x)/device/startup
+Date:		March 2014
+Contact:	Carlo Caione <carlo@caione.org>
+Description:	Startup time in us. Board is powered on if the button is pressed
+		for more than <startup_time>
+
+What:		/sys/class/input/input(x)/device/shutdown
+Date:		March 2014
+Contact:	Carlo Caione <carlo@caione.org>
+Description:	Shutdown time in us. Board is powered off if the button is pressed
+		for more than <shutdown_time>

Documentation/devicetree/bindings/input/e3x0-button.txt

+National Instruments Ettus Research USRP E3x0 button driver
+
+This module is part of the NI Ettus Research USRP E3x0 SDR.
+
+This module provides a simple power button event via two interrupts.
+
+Required properties:
+- compatible: should be one of the following
+  - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
+- interrupt-parent:
+  - a phandle to the interrupt controller that it is attached to.
+- interrupts: should be one of the following
+  - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
+- interrupt-names: should be one of the following
+  - "press", "release": For devices such as the NI Ettus Research USRP E3x0
+
+Note: Interrupt numbers might vary depending on the FPGA configuration.
+
+Example:
+	button {
+		compatible = "ettus,e3x0-button";
+		interrupt-parent = <&intc>;
+		interrupts = <0 30 1>, <0 31 1>;
+		interrupt-names = "press", "release";
+	}

Documentation/devicetree/bindings/input/regulator-haptic.txt

+* Regulator Haptic Device Tree Bindings
+
+Required Properties:
+ - compatible : Should be "regulator-haptic"
+ - haptic-supply : Power supply to the haptic motor.
+	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ - max-microvolt : The maximum voltage value supplied to the haptic motor.
+		[The unit of the voltage is a micro]
+
+ - min-microvolt : The minimum voltage value supplied to the haptic motor.
+		[The unit of the voltage is a micro]
+
+Example:
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_regulator>;
+		max-microvolt = <2700000>;
+		min-microvolt = <1100000>;
+	};

Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt

+Allwinner sun4i low res adc attached tablet keys
+------------------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-lradc-keys"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - vref-supply: powersupply for the lradc reference voltage
+
+Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
+
+Required subnode-properties:
+	- label: Descriptive name of the key.
+	- linux,code: Keycode to emit.
+	- channel: Channel this key is attached to, mut be 0 or 1.
+	- voltage: Voltage in µV at lradc input when this key is pressed.
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+	lradc: lradc@01c22800 {
+		compatible = "allwinner,sun4i-a10-lradc-keys";
+		reg = <0x01c22800 0x100>;
+		interrupts = <31>;
+		vref-supply = <&reg_vcc3v0>;
+
+		button@191 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			channel = <0>;
+			voltage = <191274>;
+		};
+
+		button@392 {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			channel = <0>;
+			voltage = <392644>;
+		};
+
+		button@601 {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			channel = <0>;
+			voltage = <601151>;
+		};
+
+		button@795 {
+			label = "Enter";
+			linux,code = <KEY_ENTER>;
+			channel = <0>;
+			voltage = <795090>;
+		};
+
+		button@987 {
+			label = "Home";
+			linux,code = <KEY_HOMEPAGE>;
+			channel = <0>;
+			voltage = <987387>;
+		};
+	};

Documentation/devicetree/bindings/input/touchscreen/sun4i.txt

@@ -2,9 +2,10 @@ sun4i resistive touchscreen controller
 --------------------------------------
 
 Required properties:
- - compatible: "allwinner,sun4i-a10-ts"
+ - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts"
  - reg: mmio address range of the chip
  - interrupts: interrupt to which the chip is connected
+ - #thermal-sensor-cells: shall be 0
 
 Optional properties:
  - allwinner,ts-attached: boolean indicating that an actual touchscreen is
@@ -17,4 +18,5 @@ Example:
 		reg = <0x01c25000 0x100>;
 		interrupts = <29>;
 		allwinner,ts-attached;
+		#thermal-sensor-cells = <0>;
 	};

Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt

@@ -28,6 +28,20 @@ Required properties:
 	ti,adc-channels: List of analog inputs available for ADC.
 			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
 
+Optional properties:
+- child "tsc"
+	ti,charge-delay: Length of touch screen charge delay step in terms of
+			 ADC clock cycles. Charge delay value should be large
+			 in order to avoid false pen-up events. This value
+			 effects the overall sampling speed, hence need to be
+			 kept as low as possible, while avoiding false pen-up
+			 event. Start from a lower value, say 0x400, and
+			 increase value until false pen-up events are avoided.
+			 The pen-up detection happens immediately after the
+			 charge step, so this does in fact function as a
+			 hardware knob for adjusting the amount of "settling
+			 time".
+
 Example:
 	tscadc: tscadc@44e0d000 {
 		compatible = "ti,am3359-tscadc";
@@ -36,6 +50,7 @@ Example:
 			ti,x-plate-resistance = <200>;
 			ti,coordiante-readouts = <5>;
 			ti,wire-config = <0x00 0x11 0x22 0x33>;
+			ti,charge-delay = <0x400>;
 		};
 
 		adc {

Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt

+Texas Instruments TPS65218 power button
+
+This driver provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be "ti,tps65218-pwrbutton"
+- interrupts: should be one of the following
+   - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
+
+Example:
+
+&tps {
+	power-button {
+		compatible = "ti,tps65218-pwrbutton";
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+	};
+};

Documentation/devicetree/bindings/serio/allwinner,sun4i-ps2.txt

+* Device tree bindings for Allwinner A10, A20 PS2 host controller
+
+A20 PS2 is dual role controller (PS2 host and PS2 device). These bindings are
+for PS2 A10/A20 host controller. IBM compliant IBM PS2 and AT-compatible keyboard
+and mouse can be connected.
+
+Required properties:
+
+ - reg             : Offset and length of the register set for the device.
+ - compatible      : Should be as of the following:
+                     - "allwinner,sun4i-a10-ps2"
+ - interrupts      : The interrupt line connected to the PS2.
+ - clocks          : The gate clk connected to the PS2.
+
+
+Example:
+	ps20: ps2@0x01c2a000 {
+		compatible = "allwinner,sun4i-a10-ps2";
+		reg = <0x01c2a000 0x400>;
+		interrupts = <0 62 4>;
+		clocks = <&apb1_gates 6>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -54,6 +54,7 @@ epcos	EPCOS AG
 epfl	Ecole Polytechnique Fédérale de Lausanne
 epson	Seiko Epson Corp.
 est	ESTeem Wireless Modems
+ettus	NI Ettus Research
 eukrea  Eukréa Electromatique
 everest	Everest Semiconductor Co. Ltd.
 excito	Excito

MAINTAINERS

@@ -3479,6 +3479,14 @@ M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/tty/serial/dz.*
 
+E3X0 POWER BUTTON DRIVER
+M:	Moritz Fischer <moritz.fischer@ettus.com>
+L:	usrp-users@lists.ettus.com
+W:	http://www.ettus.com
+S:	Supported
+F:	drivers/input/misc/e3x0-button.c
+F:	Documentation/devicetree/bindings/input/e3x0-button.txt
+
 E4000 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
@@ -9281,6 +9289,13 @@ F:	arch/m68k/sun3*/
 F:	arch/m68k/include/asm/sun3*
 F:	drivers/net/ethernet/i825xx/sun3*
 
+SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
+F:	drivers/input/keyboard/sun4i-lradc-keys.c
+
 SUNDANCE NETWORK DRIVER
 M:	Denis Kirjanov <kda@linux-powerpc.org>
 L:	netdev@vger.kernel.org

arch/arm/boot/dts/am335x-evm.dts

@@ -648,6 +648,7 @@ tsc {
 		ti,x-plate-resistance = <200>;
 		ti,coordinate-readouts = <5>;
 		ti,wire-config = <0x00 0x11 0x22 0x33>;
+		ti,charge-delay = <0x400>;
 	};
 
 	adc {

drivers/iio/adc/ti_am335x_adc.c

@@ -86,19 +86,18 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
 {
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
 	unsigned int stepconfig;
-	int i, steps;
+	int i, steps = 0;
 
 	/*
 	 * There are 16 configurable steps and 8 analog input
 	 * lines available which are shared between Touchscreen and ADC.
 	 *
-	 * Steps backwards i.e. from 16 towards 0 are used by ADC
+	 * Steps forwards i.e. from 0 towards 16 are used by ADC
 	 * depending on number of input lines needed.
 	 * Channel would represent which analog input
 	 * needs to be given to ADC to digitalize data.
 	 */
 
-	steps = TOTAL_STEPS - adc_dev->channels;
 	if (iio_buffer_enabled(indio_dev))
 		stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
 					| STEPCONFIG_MODE_SWCNT;

drivers/input/evdev.c

@@ -62,26 +62,6 @@ struct evdev_client {
 	struct input_event buffer[];
 };
 
-static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
-{
-	switch (clkid) {
-
-	case CLOCK_REALTIME:
-		client->clk_type = EV_CLK_REAL;
-		break;
-	case CLOCK_MONOTONIC:
-		client->clk_type = EV_CLK_MONO;
-		break;
-	case CLOCK_BOOTTIME:
-		client->clk_type = EV_CLK_BOOT;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 /* flush queued events of type @type, caller must hold client->buffer_lock */
 static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 {
@@ -128,10 +108,8 @@ static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
 	client->head = head;
 }
 
-/* queue SYN_DROPPED event */
-static void evdev_queue_syn_dropped(struct evdev_client *client)
+static void __evdev_queue_syn_dropped(struct evdev_client *client)
 {
-	unsigned long flags;
 	struct input_event ev;
 	ktime_t time;
 
@@ -146,8 +124,6 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
 	ev.code = SYN_DROPPED;
 	ev.value = 0;
 
-	spin_lock_irqsave(&client->buffer_lock, flags);
-
 	client->buffer[client->head++] = ev;
 	client->head &= client->bufsize - 1;
 
@@ -156,8 +132,53 @@ static void evdev_queue_syn_dropped(struct evdev_client *client)
 		client->tail = (client->head - 1) & (client->bufsize - 1);
 		client->packet_head = client->tail;
 	}
+}
+
+static void evdev_queue_syn_dropped(struct evdev_client *client)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&client->buffer_lock, flags);
+	__evdev_queue_syn_dropped(client);
+	spin_unlock_irqrestore(&client->buffer_lock, flags);
+}
+
+static int evdev_set_clk_type(struct evdev_client *client, unsigned int clkid)
+{
+	unsigned long flags;
+
+	if (client->clk_type == clkid)
+		return 0;
+
+	switch (clkid) {
+
+	case CLOCK_REALTIME:
+		client->clk_type = EV_CLK_REAL;
+		break;
+	case CLOCK_MONOTONIC:
+		client->clk_type = EV_CLK_MONO;
+		break;
+	case CLOCK_BOOTTIME:
+		client->clk_type = EV_CLK_BOOT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Flush pending events and queue SYN_DROPPED event,
+	 * but only if the queue is not empty.
+	 */
+	spin_lock_irqsave(&client->buffer_lock, flags);
+
+	if (client->head != client->tail) {
+		client->packet_head = client->head = client->tail;
+		__evdev_queue_syn_dropped(client);
+	}
 
 	spin_unlock_irqrestore(&client->buffer_lock, flags);
+
+	return 0;
 }
 
 static void __pass_event(struct evdev_client *client,

drivers/input/input-mt.c

@@ -293,7 +293,7 @@ void input_mt_sync_frame(struct input_dev *dev)
 }
 EXPORT_SYMBOL(input_mt_sync_frame);
 
-static int adjust_dual(int *begin, int step, int *end, int eq)
+static int adjust_dual(int *begin, int step, int *end, int eq, int mu)
 {
 	int f, *p, s, c;
 
@@ -311,9 +311,10 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
 			s = *p;
 
 	c = (f + s + 1) / 2;
-	if (c == 0 || (c > 0 && !eq))
+	if (c == 0 || (c > mu && (!eq || mu > 0)))
 		return 0;
-	if (s < 0)
+	/* Improve convergence for positive matrices by penalizing overcovers */
+	if (s < 0 && mu <= 0)
 		c *= 2;
 
 	for (p = begin; p != end; p += step)
@@ -322,23 +323,24 @@ static int adjust_dual(int *begin, int step, int *end, int eq)
 	return (c < s && s <= 0) || (f >= 0 && f < c);
 }
 
-static void find_reduced_matrix(int *w, int nr, int nc, int nrc)
+static void find_reduced_matrix(int *w, int nr, int nc, int nrc, int mu)
 {
 	int i, k, sum;
 
 	for (k = 0; k < nrc; k++) {
 		for (i = 0; i < nr; i++)
-			adjust_dual(w + i, nr, w + i + nrc, nr <= nc);
+			adjust_dual(w + i, nr, w + i + nrc, nr <= nc, mu);
 		sum = 0;
 		for (i = 0; i < nrc; i += nr)
-			sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr);
+			sum += adjust_dual(w + i, 1, w + i + nr, nc <= nr, mu);
 		if (!sum)
 			break;
 	}
 }
 
 static int input_mt_set_matrix(struct input_mt *mt,
-			       const struct input_mt_pos *pos, int num_pos)
+			       const struct input_mt_pos *pos, int num_pos,
+			       int mu)
 {
 	const struct input_mt_pos *p;
 	struct input_mt_slot *s;
@@ -352,7 +354,7 @@ static int input_mt_set_matrix(struct input_mt *mt,
 		y = input_mt_get_value(s, ABS_MT_POSITION_Y);
 		for (p = pos; p != pos + num_pos; p++) {
 			int dx = x - p->x, dy = y - p->y;
-			*w++ = dx * dx + dy * dy;
+			*w++ = dx * dx + dy * dy - mu;
 		}
 	}
 
@@ -393,17 +395,24 @@ static void input_mt_set_slots(struct input_mt *mt,
  * @slots: the slot assignment to be filled
  * @pos: the position array to match
  * @num_pos: number of positions
+ * @dmax: maximum ABS_MT_POSITION displacement (zero for infinite)
  *
  * Performs a best match against the current contacts and returns
  * the slot assignment list. New contacts are assigned to unused
  * slots.
  *
+ * The assignments are balanced so that all coordinate displacements are
+ * below the euclidian distance dmax. If no such assignment can be found,
+ * some contacts are assigned to unused slots.
+ *
  * Returns zero on success, or negative error in case of failure.
  */
 int input_mt_assign_slots(struct input_dev *dev, int *slots,
-			  const struct input_mt_pos *pos, int num_pos)
+			  const struct input_mt_pos *pos, int num_pos,
+			  int dmax)
 {
 	struct input_mt *mt = dev->mt;
+	int mu = 2 * dmax * dmax;
 	int nrc;
 
 	if (!mt || !mt->red)
@@ -413,8 +422,8 @@ int input_mt_assign_slots(struct input_dev *dev, int *slots,
 	if (num_pos < 1)
 		return 0;
 
-	nrc = input_mt_set_matrix(mt, pos, num_pos);
-	find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc);
+	nrc = input_mt_set_matrix(mt, pos, num_pos, mu);
+	find_reduced_matrix(mt->red, num_pos, nrc / num_pos, nrc, mu);
 	input_mt_set_slots(mt, slots, num_pos);
 
 	return 0;

drivers/input/input.c

@@ -100,23 +100,24 @@ static unsigned int input_to_handler(struct input_handle *handle,
 	struct input_value *end = vals;
 	struct input_value *v;
 
+	if (handler->filter) {
 		for (v = vals; v != vals + count; v++) {
-		if (handler->filter &&
-		    handler->filter(handle, v->type, v->code, v->value))
+			if (handler->filter(handle, v->type, v->code, v->value))
 				continue;
 			if (end != v)
 				*end = *v;
 			end++;
 		}
-
 		count = end - vals;
+	}
+
 	if (!count)
 		return 0;
 
 	if (handler->events)
 		handler->events(handle, vals, count);
 	else if (handler->event)
-		for (v = vals; v != end; v++)
+		for (v = vals; v != vals + count; v++)
 			handler->event(handle, v->type, v->code, v->value);
 
 	return count;
@@ -143,8 +144,11 @@ static void input_pass_values(struct input_dev *dev,
 		count = input_to_handler(handle, vals, count);
 	} else {
 		list_for_each_entry_rcu(handle, &dev->h_list, d_node)
-			if (handle->open)
+			if (handle->open) {
 				count = input_to_handler(handle, vals, count);
+				if (!count)
+					break;
+			}
 	}
 
 	rcu_read_unlock();
@@ -152,6 +156,7 @@ static void input_pass_values(struct input_dev *dev,
 	add_input_randomness(vals->type, vals->code, vals->value);
 
 	/* trigger auto repeat for key events */
+	if (test_bit(EV_REP, dev->evbit) && test_bit(EV_KEY, dev->evbit)) {
 		for (v = vals; v != vals + count; v++) {
 			if (v->type == EV_KEY && v->value != 2) {
 				if (v->value)
@@ -160,6 +165,7 @@ static void input_pass_values(struct input_dev *dev,
 					input_stop_autorepeat(dev);
 			}
 		}
+	}
 }
 
 static void input_pass_event(struct input_dev *dev,

drivers/input/keyboard/Kconfig

@@ -568,6 +568,16 @@ config KEYBOARD_STMPE
 	  To compile this driver as a module, choose M here: the module will be
 	  called stmpe-keypad.
 
+config KEYBOARD_SUN4I_LRADC
+	tristate "Allwinner sun4i low res adc attached tablet keys support"
+	depends on ARCH_SUNXI
+	help
+	  This selects support for the Allwinner low res adc attached tablet
+	  keys found on Allwinner sunxi SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun4i-lradc-keys.
+
 config KEYBOARD_DAVINCI
 	tristate "TI DaVinci Key Scan"
 	depends on ARCH_DAVINCI_DM365

drivers/input/keyboard/Makefile

@@ -53,6 +53,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_ST_KEYSCAN)	+= st-keyscan.o
+obj-$(CONFIG_KEYBOARD_SUN4I_LRADC)	+= sun4i-lradc-keys.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
 obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
 obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o

drivers/input/keyboard/atakbd.c

@@ -170,7 +170,7 @@ static unsigned char atakbd_keycode[0x72] = {	/* American layout */
 	[93]	 = KEY_KPASTERISK,
 	[94]	 = KEY_KPPLUS,
 	[95]	 = KEY_HELP,
-	[96]	 = KEY_BACKSLASH,	/* FIXME: '<' */
+	[96]	 = KEY_102ND,
 	[97]	 = KEY_KPASTERISK,	/* FIXME */
 	[98]	 = KEY_KPSLASH,
 	[99]	 = KEY_KPLEFTPAREN,

drivers/input/keyboard/cap11xx.c

@@ -370,7 +370,6 @@ static struct i2c_driver cap11xx_i2c_driver = {
 
 module_i2c_driver(cap11xx_i2c_driver);
 
-MODULE_ALIAS("platform:cap11xx");
 MODULE_DESCRIPTION("Microchip CAP11XX driver");
 MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
 MODULE_LICENSE("GPL v2");

drivers/input/keyboard/imx_keypad.c

@@ -448,8 +448,7 @@ static int imx_keypad_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	keypad = devm_kzalloc(&pdev->dev, sizeof(struct imx_keypad),
-			      GFP_KERNEL);
+	keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
 	if (!keypad) {
 		dev_err(&pdev->dev, "not enough memory for driver data\n");
 		return -ENOMEM;

drivers/input/keyboard/pxa27x_keypad.c

@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/io.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -28,10 +29,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 /*
  * Keypad Controller registers

drivers/input/keyboard/sun4i-lradc-keys.c

+/*
+ * Allwinner sun4i low res adc attached tablet keys driver
+ *
+ * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Allwinnner sunxi SoCs have a lradc which is specifically designed to have
+ * various (tablet) keys (ie home, back, search, etc). attached to it using
+ * a resistor network. This driver is for the keys on such boards.
+ *
+ * There are 2 channels, currently this driver only supports channel 0 since
+ * there are no boards known to use channel 1.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define LRADC_CTRL		0x00
+#define LRADC_INTC		0x04
+#define LRADC_INTS		0x08
+#define LRADC_DATA0		0x0c
+#define LRADC_DATA1		0x10
+
+/* LRADC_CTRL bits */
+#define FIRST_CONVERT_DLY(x)	((x) << 24) /* 8 bits */
+#define CHAN_SELECT(x)		((x) << 22) /* 2 bits */
+#define CONTINUE_TIME_SEL(x)	((x) << 16) /* 4 bits */
+#define KEY_MODE_SEL(x)		((x) << 12) /* 2 bits */
+#define LEVELA_B_CNT(x)		((x) << 8)  /* 4 bits */
+#define HOLD_EN(x)		((x) << 6)
+#define LEVELB_VOL(x)		((x) << 4)  /* 2 bits */
+#define SAMPLE_RATE(x)		((x) << 2)  /* 2 bits */
+#define ENABLE(x)		((x) << 0)
+
+/* LRADC_INTC and LRADC_INTS bits */
+#define CHAN1_KEYUP_IRQ		BIT(12)
+#define CHAN1_ALRDY_HOLD_IRQ	BIT(11)
+#define CHAN1_HOLD_IRQ		BIT(10)
+#define	CHAN1_KEYDOWN_IRQ	BIT(9)
+#define CHAN1_DATA_IRQ		BIT(8)
+#define CHAN0_KEYUP_IRQ		BIT(4)
+#define CHAN0_ALRDY_HOLD_IRQ	BIT(3)
+#define CHAN0_HOLD_IRQ		BIT(2)
+#define	CHAN0_KEYDOWN_IRQ	BIT(1)
+#define CHAN0_DATA_IRQ		BIT(0)
+
+struct sun4i_lradc_keymap {
+	u32 voltage;
+	u32 keycode;
+};
+
+struct sun4i_lradc_data {
+	struct device *dev;
+	struct input_dev *input;
+	void __iomem *base;
+	struct regulator *vref_supply;
+	struct sun4i_lradc_keymap *chan0_map;
+	u32 chan0_map_count;
+	u32 chan0_keycode;
+	u32 vref;
+};
+
+static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id)
+{
+	struct sun4i_lradc_data *lradc = dev_id;
+	u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff;
+
+	ints  = readl(lradc->base + LRADC_INTS);
+
+	/*
+	 * lradc supports only one keypress at a time, release does not give
+	 * any info as to which key was released, so we cache the keycode.
+	 */
+
+	if (ints & CHAN0_KEYUP_IRQ) {
+		input_report_key(lradc->input, lradc->chan0_keycode, 0);
+		lradc->chan0_keycode = 0;
+	}
+
+	if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) {
+		val = readl(lradc->base + LRADC_DATA0) & 0x3f;
+		voltage = val * lradc->vref / 63;
+
+		for (i = 0; i < lradc->chan0_map_count; i++) {
+			diff = abs(lradc->chan0_map[i].voltage - voltage);
+			if (diff < closest) {
+				closest = diff;
+				keycode = lradc->chan0_map[i].keycode;
+			}
+		}
+
+		lradc->chan0_keycode = keycode;
+		input_report_key(lradc->input, lradc->chan0_keycode, 1);
+	}
+
+	input_sync(lradc->input);
+
+	writel(ints, lradc->base + LRADC_INTS);
+
+	return IRQ_HANDLED;
+}
+
+static int sun4i_lradc_open(struct input_dev *dev)
+{
+	struct sun4i_lradc_data *lradc = input_get_drvdata(dev);
+	int error;
+
+	error = regulator_enable(lradc->vref_supply);
+	if (error)
+		return error;
+
+	/* lradc Vref internally is divided by 2/3 */
+	lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3;
+
+	/*
+	 * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to
+	 * stabilize on press, wait (1 + 1) * 4 ms for key release
+	 */
+	writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
+		SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL);
+
+	writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC);
+
+	return 0;
+}
+
+static void sun4i_lradc_close(struct input_dev *dev)
+{
+	struct sun4i_lradc_data *lradc = input_get_drvdata(dev);
+
+	/* Disable lradc, leave other settings unchanged */
+	writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
+		SAMPLE_RATE(2), lradc->base + LRADC_CTRL);
+	writel(0, lradc->base + LRADC_INTC);
+
+	regulator_disable(lradc->vref_supply);
+}
+
+static int sun4i_lradc_load_dt_keymap(struct device *dev,
+				      struct sun4i_lradc_data *lradc)
+{
+	struct device_node *np, *pp;
+	int i;
+	int error;
+
+	np = dev->of_node;
+	if (!np)
+		return -EINVAL;
+
+	lradc->chan0_map_count = of_get_child_count(np);
+	if (lradc->chan0_map_count == 0) {
+		dev_err(dev, "keymap is missing in device tree\n");
+		return -EINVAL;
+	}
+
+	lradc->chan0_map = devm_kmalloc_array(dev, lradc->chan0_map_count,
+					      sizeof(struct sun4i_lradc_keymap),
+					      GFP_KERNEL);
+	if (!lradc->chan0_map)
+		return -ENOMEM;
+
+	i = 0;
+	for_each_child_of_node(np, pp) {
+		struct sun4i_lradc_keymap *map = &lradc->chan0_map[i];
+		u32 channel;
+
+		error = of_property_read_u32(pp, "channel", &channel);
+		if (error || channel != 0) {
+			dev_err(dev, "%s: Inval channel prop\n", pp->name);
+			return -EINVAL;
+		}
+
+		error = of_property_read_u32(pp, "voltage", &map->voltage);
+		if (error) {
+			dev_err(dev, "%s: Inval voltage prop\n", pp->name);
+			return -EINVAL;
+		}
+
+		error = of_property_read_u32(pp, "linux,code", &map->keycode);
+		if (error) {
+			dev_err(dev, "%s: Inval linux,code prop\n", pp->name);
+			return -EINVAL;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int sun4i_lradc_probe(struct platform_device *pdev)
+{
+	struct sun4i_lradc_data *lradc;
+	struct device *dev = &pdev->dev;
+	int i;
+	int error;
+
+	lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL);
+	if (!lradc)
+		return -ENOMEM;
+
+	error = sun4i_lradc_load_dt_keymap(dev, lradc);
+	if (error)
+		return error;
+
+	lradc->vref_supply = devm_regulator_get(dev, "vref");
+	if (IS_ERR(lradc->vref_supply))
+		return PTR_ERR(lradc->vref_supply);
+
+	lradc->dev = dev;
+	lradc->input = devm_input_allocate_device(dev);
+	if (!lradc->input)
+		return -ENOMEM;
+
+	lradc->input->name = pdev->name;
+	lradc->input->phys = "sun4i_lradc/input0";
+	lradc->input->open = sun4i_lradc_open;
+	lradc->input->close = sun4i_lradc_close;
+	lradc->input->id.bustype = BUS_HOST;
+	lradc->input->id.vendor = 0x0001;
+	lradc->input->id.product = 0x0001;
+	lradc->input->id.version = 0x0100;
+
+	__set_bit(EV_KEY, lradc->input->evbit);
+	for (i = 0; i < lradc->chan0_map_count; i++)
+		__set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit);
+
+	input_set_drvdata(lradc->input, lradc);
+
+	lradc->base = devm_ioremap_resource(dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(lradc->base))
+		return PTR_ERR(lradc->base);
+
+	error = devm_request_irq(dev, platform_get_irq(pdev, 0),
+				 sun4i_lradc_irq, 0,
+				 "sun4i-a10-lradc-keys", lradc);
+	if (error)
+		return error;
+
+	error = input_register_device(lradc->input);
+	if (error)
+		return error;
+
+	platform_set_drvdata(pdev, lradc);
+	return 0;
+}
+
+static const struct of_device_id sun4i_lradc_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-lradc-keys", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match);
+
+static struct platform_driver sun4i_lradc_driver = {
+	.driver = {
+		.name	= "sun4i-a10-lradc-keys",
+		.of_match_table = of_match_ptr(sun4i_lradc_of_match),
+	},
+	.probe	= sun4i_lradc_probe,
+};
+
+module_platform_driver(sun4i_lradc_driver);
+
+MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");

drivers/input/misc/Kconfig

@@ -93,6 +93,16 @@ config INPUT_BMA150
 	  To compile this driver as a module, choose M here: the
 	  module will be called bma150.
 
+config INPUT_E3X0_BUTTON
+	tristate "NI Ettus Research USRP E3x0 Button support."
+	default n
+	help
+	  Say Y here to enable support for the NI Ettus Research
+	  USRP E3x0 Button.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called e3x0_button.
+
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM
@@ -394,6 +404,18 @@ config INPUT_CM109
 	  To compile this driver as a module, choose M here: the module will be
 	  called cm109.
 
+config INPUT_REGULATOR_HAPTIC
+	tristate "Regulator haptics support"
+	depends on REGULATOR
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables device driver support for the haptic controlled
+	  by a regulator. This driver supports ff-memless interface
+	  from input framework.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called regulator-haptic.
+
 config INPUT_RETU_PWRBUTTON
 	tristate "Retu Power button Driver"
 	depends on MFD_RETU
@@ -404,6 +426,27 @@ config INPUT_RETU_PWRBUTTON
 	  To compile this driver as a module, choose M here. The module will
 	  be called retu-pwrbutton.
 
+config INPUT_TPS65218_PWRBUTTON
+	tristate "TPS65218 Power button driver"
+	depends on MFD_TPS65218
+	help
+	  Say Y here if you want to enable power buttong reporting for
+	  the TPS65218 Power Management IC device.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called tps65218-pwrbutton.
+
+config INPUT_AXP20X_PEK
+	tristate "X-Powers AXP20X power button driver"
+	depends on MFD_AXP20X
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  AXP20X PMIC.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called axp20x-pek.
+
+
 config INPUT_TWL4030_PWRBUTTON
 	tristate "TWL4030 Power button Driver"
 	depends on TWL4030_CORE

drivers/input/misc/Makefile

@@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
+obj-$(CONFIG_INPUT_E3X0_BUTTON)		+= e3x0-button.o
 obj-$(CONFIG_INPUT_DRV260X_HAPTICS)	+= drv260x.o
 obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
@@ -53,12 +54,15 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY)	+= pmic8xxx-pwrkey.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
+obj-$(CONFIG_INPUT_REGULATOR_HAPTIC)	+= regulator-haptic.o
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
+obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
+obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON)	+= tps65218-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_TWL6040_VIBRA)	+= twl6040-vibra.o

drivers/input/misc/axp20x-pek.c

+/*
+ * axp20x power button driver.
+ *
+ * Copyright (C) 2013 Carlo Caione <carlo@caione.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define AXP20X_PEK_STARTUP_MASK		(0xc0)
+#define AXP20X_PEK_SHUTDOWN_MASK	(0x03)
+
+struct axp20x_pek {
+	struct axp20x_dev *axp20x;
+	struct input_dev *input;
+	int irq_dbr;
+	int irq_dbf;
+};
+
+struct axp20x_time {
+	unsigned int time;
+	unsigned int idx;
+};
+
+static const struct axp20x_time startup_time[] = {
+	{ .time = 128,  .idx = 0 },
+	{ .time = 1000, .idx = 2 },
+	{ .time = 3000, .idx = 1 },
+	{ .time = 2000, .idx = 3 },
+};
+
+static const struct axp20x_time shutdown_time[] = {
+	{ .time = 4000,  .idx = 0 },
+	{ .time = 6000,  .idx = 1 },
+	{ .time = 8000,  .idx = 2 },
+	{ .time = 10000, .idx = 3 },
+};
+
+struct axp20x_pek_ext_attr {
+	const struct axp20x_time *p_time;
+	unsigned int mask;
+};
+
+static struct axp20x_pek_ext_attr axp20x_pek_startup_ext_attr = {
+	.p_time	= startup_time,
+	.mask	= AXP20X_PEK_STARTUP_MASK,
+};
+
+static struct axp20x_pek_ext_attr axp20x_pek_shutdown_ext_attr = {
+	.p_time	= shutdown_time,
+	.mask	= AXP20X_PEK_SHUTDOWN_MASK,
+};
+
+static struct axp20x_pek_ext_attr *get_axp_ext_attr(struct device_attribute *attr)
+{
+	return container_of(attr, struct dev_ext_attribute, attr)->var;
+}
+
+static ssize_t axp20x_show_ext_attr(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
+	unsigned int val;
+	int ret, i;
+
+	ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val);
+	if (ret != 0)
+		return ret;
+
+	val &= axp20x_ea->mask;
+	val >>= ffs(axp20x_ea->mask) - 1;
+
+	for (i = 0; i < 4; i++)
+		if (val == axp20x_ea->p_time[i].idx)
+			val = axp20x_ea->p_time[i].time;
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t axp20x_store_ext_attr(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
+	struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
+	char val_str[20];
+	size_t len;
+	int ret, i;
+	unsigned int val, idx = 0;
+	unsigned int best_err = UINT_MAX;
+
+	val_str[sizeof(val_str) - 1] = '\0';
+	strncpy(val_str, buf, sizeof(val_str) - 1);
+	len = strlen(val_str);
+
+	if (len && val_str[len - 1] == '\n')
+		val_str[len - 1] = '\0';
+
+	ret = kstrtouint(val_str, 10, &val);
+	if (ret)
+		return ret;
+
+	for (i = 3; i >= 0; i--) {
+		unsigned int err;
+
+		err = abs(axp20x_ea->p_time[i].time - val);
+		if (err < best_err) {
+			best_err = err;
+			idx = axp20x_ea->p_time[i].idx;
+		}
+
+		if (!err)
+			break;
+	}
+
+	idx <<= ffs(axp20x_ea->mask) - 1;
+	ret = regmap_update_bits(axp20x_pek->axp20x->regmap,
+				 AXP20X_PEK_KEY,
+				 axp20x_ea->mask, idx);
+	if (ret != 0)
+		return -EINVAL;
+
+	return count;
+}
+
+static struct dev_ext_attribute axp20x_dev_attr_startup = {
+	.attr	= __ATTR(startup, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
+	.var	= &axp20x_pek_startup_ext_attr,
+};
+
+static struct dev_ext_attribute axp20x_dev_attr_shutdown = {
+	.attr	= __ATTR(shutdown, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
+	.var	= &axp20x_pek_shutdown_ext_attr,
+};
+
+static struct attribute *axp20x_attributes[] = {
+	&axp20x_dev_attr_startup.attr.attr,
+	&axp20x_dev_attr_shutdown.attr.attr,
+	NULL,
+};
+
+static const struct attribute_group axp20x_attribute_group = {
+	.attrs = axp20x_attributes,
+};
+
+static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
+{
+	struct input_dev *idev = pwr;
+	struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
+
+	if (irq == axp20x_pek->irq_dbr)
+		input_report_key(idev, KEY_POWER, true);
+	else if (irq == axp20x_pek->irq_dbf)
+		input_report_key(idev, KEY_POWER, false);
+
+	input_sync(idev);
+
+	return IRQ_HANDLED;
+}
+
+static void axp20x_remove_sysfs_group(void *_data)
+{
+	struct device *dev = _data;
+
+	sysfs_remove_group(&dev->kobj, &axp20x_attribute_group);
+}
+
+static int axp20x_pek_probe(struct platform_device *pdev)
+{
+	struct axp20x_pek *axp20x_pek;
+	struct axp20x_dev *axp20x;
+	struct input_dev *idev;
+	int error;
+
+	axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek),
+				  GFP_KERNEL);
+	if (!axp20x_pek)
+		return -ENOMEM;
+
+	axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
+	axp20x = axp20x_pek->axp20x;
+
+	axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
+	if (axp20x_pek->irq_dbr < 0) {
+		dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n",
+				axp20x_pek->irq_dbr);
+		return axp20x_pek->irq_dbr;
+	}
+	axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbr);
+
+	axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
+	if (axp20x_pek->irq_dbf < 0) {
+		dev_err(&pdev->dev, "No IRQ for PEK_DBF, error=%d\n",
+				axp20x_pek->irq_dbf);
+		return axp20x_pek->irq_dbf;
+	}
+	axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc,
+						  axp20x_pek->irq_dbf);
+
+	axp20x_pek->input = devm_input_allocate_device(&pdev->dev);
+	if (!axp20x_pek->input)
+		return -ENOMEM;
+
+	idev = axp20x_pek->input;
+
+	idev->name = "axp20x-pek";
+	idev->phys = "m1kbd/input2";
+	idev->dev.parent = &pdev->dev;
+
+	input_set_capability(idev, EV_KEY, KEY_POWER);
+
+	input_set_drvdata(idev, axp20x_pek);
+
+	error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr,
+					     axp20x_pek_irq, 0,
+					     "axp20x-pek-dbr", idev);
+	if (error < 0) {
+		dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n",
+			axp20x_pek->irq_dbr, error);
+		return error;
+	}
+
+	error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf,
+					  axp20x_pek_irq, 0,
+					  "axp20x-pek-dbf", idev);
+	if (error < 0) {
+		dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n",
+			axp20x_pek->irq_dbf, error);
+		return error;
+	}
+
+	error = sysfs_create_group(&pdev->dev.kobj, &axp20x_attribute_group);
+	if (error) {
+		dev_err(axp20x->dev, "Failed to create sysfs attributes: %d\n",
+			error);
+		return error;
+	}
+
+	error = devm_add_action(&pdev->dev,
+				axp20x_remove_sysfs_group, &pdev->dev);
+	if (error) {
+		axp20x_remove_sysfs_group(&pdev->dev);
+		dev_err(&pdev->dev, "Failed to add sysfs cleanup action: %d\n",
+			error);
+		return error;
+	}
+
+	error = input_register_device(idev);
+	if (error) {
+		dev_err(axp20x->dev, "Can't register input device: %d\n",
+			error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, axp20x_pek);
+
+	return 0;
+}
+
+static struct platform_driver axp20x_pek_driver = {
+	.probe		= axp20x_pek_probe,
+	.driver		= {
+		.name		= "axp20x-pek",
+	},
+};
+module_platform_driver(axp20x_pek_driver);
+
+MODULE_DESCRIPTION("axp20x Power Button");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");

drivers/input/misc/drv260x.c

@@ -733,7 +733,6 @@ static struct i2c_driver drv260x_driver = {
 };
 module_i2c_driver(drv260x_driver);
 
-MODULE_ALIAS("platform:drv260x-haptics");
 MODULE_DESCRIPTION("TI DRV260x haptics driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");

drivers/input/misc/drv2667.c

@@ -492,7 +492,6 @@ static struct i2c_driver drv2667_driver = {
 };
 module_i2c_driver(drv2667_driver);
 
-MODULE_ALIAS("platform:drv2667-haptics");
 MODULE_DESCRIPTION("TI DRV2667 haptics driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");

drivers/input/misc/e3x0-button.c

+/*
+ * Copyright (c) 2014, National Instruments Corp. All rights reserved.
+ *
+ * Driver for NI Ettus Research USRP E3x0 Button Driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+static irqreturn_t e3x0_button_release_handler(int irq, void *data)
+{
+	struct input_dev *idev = data;
+
+	input_report_key(idev, KEY_POWER, 0);
+	input_sync(idev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t e3x0_button_press_handler(int irq, void *data)
+{
+	struct input_dev *idev = data;
+
+	input_report_key(idev, KEY_POWER, 1);
+	pm_wakeup_event(idev->dev.parent, 0);
+	input_sync(idev);
+
+	return IRQ_HANDLED;
+}
+
+static int __maybe_unused e3x0_button_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(platform_get_irq_byname(pdev, "press"));
+
+	return 0;
+}
+
+static int __maybe_unused e3x0_button_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(platform_get_irq_byname(pdev, "press"));
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(e3x0_button_pm_ops,
+			 e3x0_button_suspend, e3x0_button_resume);
+
+static int e3x0_button_probe(struct platform_device *pdev)
+{
+	struct input_dev *input;
+	int irq_press, irq_release;
+	int error;
+
+	irq_press = platform_get_irq_byname(pdev, "press");
+	if (irq_press < 0) {
+		dev_err(&pdev->dev, "No IRQ for 'press', error=%d\n",
+			irq_press);
+		return irq_press;
+	}
+
+	irq_release = platform_get_irq_byname(pdev, "release");
+	if (irq_release < 0) {
+		dev_err(&pdev->dev, "No IRQ for 'release', error=%d\n",
+			irq_release);
+		return irq_release;
+	}
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "NI Ettus Research USRP E3x0 Button Driver";
+	input->phys = "e3x0_button/input0";
+	input->dev.parent = &pdev->dev;
+
+	input_set_capability(input, EV_KEY, KEY_POWER);
+
+	error = devm_request_irq(&pdev->dev, irq_press,
+				 e3x0_button_press_handler, 0,
+				 "e3x0-button", input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request 'press' IRQ#%d: %d\n",
+			irq_press, error);
+		return error;
+	}
+
+	error = devm_request_irq(&pdev->dev, irq_release,
+				 e3x0_button_release_handler, 0,
+				 "e3x0-button", input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request 'release' IRQ#%d: %d\n",
+			irq_release, error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "Can't register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, input);
+	device_init_wakeup(&pdev->dev, 1);
+	return 0;
+}
+
+static int e3x0_button_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id e3x0_button_match[] = {
+	{ .compatible = "ettus,e3x0-button", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, e3x0_button_match);
+#endif
+
+static struct platform_driver e3x0_button_driver = {
+	.driver		= {
+		.name	= "e3x0-button",
+		.of_match_table = of_match_ptr(e3x0_button_match),
+		.pm	= &e3x0_button_pm_ops,
+	},
+	.probe		= e3x0_button_probe,
+	.remove		= e3x0_button_remove,
+};
+
+module_platform_driver(e3x0_button_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
+MODULE_DESCRIPTION("NI Ettus Research USRP E3x0 Button driver");
+MODULE_ALIAS("platform:e3x0-button");

drivers/input/misc/regulator-haptic.c

+/*
+ * Regulator haptic driver
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ * Author: Hyunhee Kim <hyunhee.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_data/regulator-haptic.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define MAX_MAGNITUDE_SHIFT	16
+
+struct regulator_haptic {
+	struct device *dev;
+	struct input_dev *input_dev;
+	struct regulator *regulator;
+
+	struct work_struct work;
+	struct mutex mutex;
+
+	bool active;
+	bool suspended;
+
+	unsigned int max_volt;
+	unsigned int min_volt;
+	unsigned int magnitude;
+};
+
+static int regulator_haptic_toggle(struct regulator_haptic *haptic, bool on)
+{
+	int error;
+
+	if (haptic->active != on) {
+
+		error = on ? regulator_enable(haptic->regulator) :
+			     regulator_disable(haptic->regulator);
+		if (error) {
+			dev_err(haptic->dev,
+				"failed to switch regulator %s: %d\n",
+				on ? "on" : "off", error);
+			return error;
+		}
+
+		haptic->active = on;
+	}
+
+	return 0;
+}
+
+static int regulator_haptic_set_voltage(struct regulator_haptic *haptic,
+					 unsigned int magnitude)
+{
+	u64 volt_mag_multi;
+	unsigned int intensity;
+	int error;
+
+	volt_mag_multi = (u64)(haptic->max_volt - haptic->min_volt) * magnitude;
+	intensity = (unsigned int)(volt_mag_multi >> MAX_MAGNITUDE_SHIFT);
+
+	error = regulator_set_voltage(haptic->regulator,
+				      intensity + haptic->min_volt,
+				      haptic->max_volt);
+	if (error) {
+		dev_err(haptic->dev, "cannot set regulator voltage to %d: %d\n",
+			intensity + haptic->min_volt, error);
+		return error;
+	}
+
+	regulator_haptic_toggle(haptic, !!magnitude);
+
+	return 0;
+}
+
+static void regulator_haptic_work(struct work_struct *work)
+{
+	struct regulator_haptic *haptic = container_of(work,
+					struct regulator_haptic, work);
+
+	mutex_lock(&haptic->mutex);
+
+	if (!haptic->suspended)
+		regulator_haptic_set_voltage(haptic, haptic->magnitude);
+
+	mutex_unlock(&haptic->mutex);
+}
+
+static int regulator_haptic_play_effect(struct input_dev *input, void *data,
+					struct ff_effect *effect)
+{
+	struct regulator_haptic *haptic = input_get_drvdata(input);
+
+	haptic->magnitude = effect->u.rumble.strong_magnitude;
+	if (!haptic->magnitude)
+		haptic->magnitude = effect->u.rumble.weak_magnitude;
+
+	schedule_work(&haptic->work);
+
+	return 0;
+}
+
+static void regulator_haptic_close(struct input_dev *input)
+{
+	struct regulator_haptic *haptic = input_get_drvdata(input);
+
+	cancel_work_sync(&haptic->work);
+	regulator_haptic_set_voltage(haptic, 0);
+}
+
+static int __maybe_unused
+regulator_haptic_parse_dt(struct device *dev, struct regulator_haptic *haptic)
+{
+	struct device_node *node;
+	int error;
+
+	node = dev->of_node;
+	if(!node) {
+		dev_err(dev, "Missing dveice tree data\n");
+		return -EINVAL;
+	}
+
+	error = of_property_read_u32(node, "max-microvolt", &haptic->max_volt);
+	if (error) {
+		dev_err(dev, "cannot parse max-microvolt\n");
+		return error;
+	}
+
+	error = of_property_read_u32(node, "min-microvolt", &haptic->min_volt);
+	if (error) {
+		dev_err(dev, "cannot parse min-microvolt\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static int regulator_haptic_probe(struct platform_device *pdev)
+{
+	const struct regulator_haptic_data *pdata = dev_get_platdata(&pdev->dev);
+	struct regulator_haptic *haptic;
+	struct input_dev *input_dev;
+	int error;
+
+	haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
+	if (!haptic)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, haptic);
+	haptic->dev = &pdev->dev;
+	mutex_init(&haptic->mutex);
+	INIT_WORK(&haptic->work, regulator_haptic_work);
+
+	if (pdata) {
+		haptic->max_volt = pdata->max_volt;
+		haptic->min_volt = pdata->min_volt;
+	} else if (IS_ENABLED(CONFIG_OF)) {
+		error = regulator_haptic_parse_dt(&pdev->dev, haptic);
+		if (error)
+			return error;
+	} else {
+		dev_err(&pdev->dev, "Missing platform data\n");
+		return -EINVAL;
+	}
+
+	haptic->regulator = devm_regulator_get_exclusive(&pdev->dev, "haptic");
+	if (IS_ERR(haptic->regulator)) {
+		dev_err(&pdev->dev, "failed to get regulator\n");
+		return PTR_ERR(haptic->regulator);
+	}
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return	-ENOMEM;
+
+	haptic->input_dev = input_dev;
+	haptic->input_dev->name = "regulator-haptic";
+	haptic->input_dev->dev.parent = &pdev->dev;
+	haptic->input_dev->close = regulator_haptic_close;
+	input_set_drvdata(haptic->input_dev, haptic);
+	input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
+
+	error = input_ff_create_memless(input_dev, NULL,
+					regulator_haptic_play_effect);
+	if (error) {
+		dev_err(&pdev->dev, "failed to create force-feedback\n");
+		return error;
+	}
+
+	error = input_register_device(haptic->input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused regulator_haptic_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct regulator_haptic *haptic = platform_get_drvdata(pdev);
+	int error;
+
+	error = mutex_lock_interruptible(&haptic->mutex);
+	if (error)
+		return error;
+
+	regulator_haptic_set_voltage(haptic, 0);
+
+	haptic->suspended = true;
+
+	mutex_unlock(&haptic->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused regulator_haptic_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct regulator_haptic *haptic = platform_get_drvdata(pdev);
+	unsigned int magnitude;
+
+	mutex_lock(&haptic->mutex);
+
+	haptic->suspended = false;
+
+	magnitude = ACCESS_ONCE(haptic->magnitude);
+	if (magnitude)
+		regulator_haptic_set_voltage(haptic, magnitude);
+
+	mutex_unlock(&haptic->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(regulator_haptic_pm_ops,
+		regulator_haptic_suspend, regulator_haptic_resume);
+
+static struct of_device_id regulator_haptic_dt_match[] = {
+	{ .compatible = "regulator-haptic" },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver regulator_haptic_driver = {
+	.probe		= regulator_haptic_probe,
+	.driver		= {
+		.name		= "regulator-haptic",
+		.of_match_table = regulator_haptic_dt_match,
+		.pm		= &regulator_haptic_pm_ops,
+	},
+};
+module_platform_driver(regulator_haptic_driver);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_AUTHOR("Hyunhee Kim <hyunhee.kim@samsung.com>");
+MODULE_DESCRIPTION("Regulator haptic driver");
+MODULE_LICENSE("GPL");

drivers/input/misc/tps65218-pwrbutton.c

+/*
+ * Texas Instruments' TPS65218 Power Button Input Driver
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/tps65218.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct tps65218_pwrbutton {
+	struct device *dev;
+	struct tps65218 *tps;
+	struct input_dev *idev;
+};
+
+static irqreturn_t tps65218_pwr_irq(int irq, void *_pwr)
+{
+	struct tps65218_pwrbutton *pwr = _pwr;
+	unsigned int reg;
+	int error;
+
+	error = tps65218_reg_read(pwr->tps, TPS65218_REG_STATUS, &reg);
+	if (error) {
+		dev_err(pwr->dev, "can't read register: %d\n", error);
+		goto out;
+	}
+
+	if (reg & TPS65218_STATUS_PB_STATE) {
+		input_report_key(pwr->idev, KEY_POWER, 1);
+		pm_wakeup_event(pwr->dev, 0);
+	} else {
+		input_report_key(pwr->idev, KEY_POWER, 0);
+	}
+
+	input_sync(pwr->idev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int tps65218_pwron_probe(struct platform_device *pdev)
+{
+	struct tps65218 *tps = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct tps65218_pwrbutton *pwr;
+	struct input_dev *idev;
+	int error;
+	int irq;
+
+	pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL);
+	if (!pwr)
+		return -ENOMEM;
+
+	idev = devm_input_allocate_device(dev);
+	if (!idev)
+		return -ENOMEM;
+
+	idev->name = "tps65218_pwrbutton";
+	idev->phys = "tps65218_pwrbutton/input0";
+	idev->dev.parent = dev;
+	idev->id.bustype = BUS_I2C;
+
+	input_set_capability(idev, EV_KEY, KEY_POWER);
+
+	pwr->tps = tps;
+	pwr->dev = dev;
+	pwr->idev = idev;
+	platform_set_drvdata(pdev, pwr);
+	device_init_wakeup(dev, true);
+
+	irq = platform_get_irq(pdev, 0);
+	error = devm_request_threaded_irq(dev, irq, NULL, tps65218_pwr_irq,
+					  IRQF_TRIGGER_RISING |
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+					  "tps65218-pwrbutton", pwr);
+	if (error) {
+		dev_err(dev, "failed to request IRQ #%d: %d\n",
+			irq, error);
+		return error;
+	}
+
+	error= input_register_device(idev);
+	if (error) {
+		dev_err(dev, "Can't register power button: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static struct of_device_id of_tps65218_pwr_match[] = {
+	{ .compatible = "ti,tps65218-pwrbutton" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_tps65218_pwr_match);
+
+static struct platform_driver tps65218_pwron_driver = {
+	.probe	= tps65218_pwron_probe,
+	.driver	= {
+		.name	= "tps65218_pwrbutton",
+		.of_match_table = of_tps65218_pwr_match,
+	},
+};
+module_platform_driver(tps65218_pwron_driver);
+
+MODULE_DESCRIPTION("TPS65218 Power Button");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");

drivers/input/mouse/Kconfig

@@ -105,19 +105,12 @@ config MOUSE_PS2_ELANTECH
 	  Say Y here if you have an Elantech PS/2 touchpad connected
 	  to your system.
 
-	  Note that if you enable this driver you will need an updated
-	  X.org Synaptics driver that does not require ABS_PRESSURE
-	  reports from the touchpad (i.e. post 1.5.0 version). You can
-	  grab a patch for the driver here:
-
-	  http://userweb.kernel.org/~dtor/synaptics-no-abspressure.patch
-
-	  If unsure, say N.
-
 	  This driver exposes some configuration registers via sysfs
 	  entries. For further information,
 	  see <file:Documentation/input/elantech.txt>.
 
+	  If unsure, say N.
+
 config MOUSE_PS2_SENTELIC
 	bool "Sentelic Finger Sensing Pad PS/2 protocol extension"
 	depends on MOUSE_PS2
@@ -146,6 +139,16 @@ config MOUSE_PS2_OLPC
 
 	  If unsure, say N.
 
+config MOUSE_PS2_FOCALTECH
+	bool "FocalTech PS/2 mouse protocol extension" if EXPERT
+	default y
+	depends on MOUSE_PS2
+	help
+	  Say Y here if you have a FocalTech PS/2 TouchPad connected to
+	  your system.
+
+	  If unsure, say Y.
+
 config MOUSE_SERIAL
 	tristate "Serial mouse"
 	select SERIO
@@ -206,6 +209,7 @@ config MOUSE_BCM5974
 config MOUSE_CYAPA
 	tristate "Cypress APA I2C Trackpad support"
 	depends on I2C
+	select CRC_ITU_T
 	help
 	  This driver adds support for Cypress All Points Addressable (APA)
 	  I2C Trackpads, including the ones used in 2012 Samsung Chromebooks.

drivers/input/mouse/Makefile

@@ -8,7 +8,7 @@ obj-$(CONFIG_MOUSE_AMIGA)		+= amimouse.o
 obj-$(CONFIG_MOUSE_APPLETOUCH)		+= appletouch.o
 obj-$(CONFIG_MOUSE_ATARI)		+= atarimouse.o
 obj-$(CONFIG_MOUSE_BCM5974)		+= bcm5974.o
-obj-$(CONFIG_MOUSE_CYAPA)		+= cyapa.o
+obj-$(CONFIG_MOUSE_CYAPA)		+= cyapatp.o
 obj-$(CONFIG_MOUSE_ELAN_I2C)		+= elan_i2c.o
 obj-$(CONFIG_MOUSE_GPIO)		+= gpio_mouse.o
 obj-$(CONFIG_MOUSE_INPORT)		+= inport.o
@@ -24,6 +24,7 @@ obj-$(CONFIG_MOUSE_SYNAPTICS_I2C)	+= synaptics_i2c.o
 obj-$(CONFIG_MOUSE_SYNAPTICS_USB)	+= synaptics_usb.o
 obj-$(CONFIG_MOUSE_VSXXXAA)		+= vsxxxaa.o
 
+cyapatp-objs := cyapa.o cyapa_gen3.o cyapa_gen5.o
 psmouse-objs := psmouse-base.o synaptics.o focaltech.o
 
 psmouse-$(CONFIG_MOUSE_PS2_ALPS)	+= alps.o

drivers/input/mouse/alps.c

@@ -435,7 +435,7 @@ static void alps_report_mt_data(struct psmouse *psmouse, int n)
 	struct alps_fields *f = &priv->f;
 	int i, slot[MAX_TOUCHES];
 
-	input_mt_assign_slots(dev, slot, f->mt, n);
+	input_mt_assign_slots(dev, slot, f->mt, n, 0);
 	for (i = 0; i < n; i++)
 		alps_set_slot(dev, slot[i], f->mt[i].x, f->mt[i].y);
 
@@ -475,6 +475,13 @@ static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
 	struct input_dev *dev = priv->dev2;
 	int x, y, z, left, right, middle;
 
+	/* It should be a DualPoint when received trackstick packet */
+	if (!(priv->flags & ALPS_DUALPOINT)) {
+		psmouse_warn(psmouse,
+			     "Rejected trackstick packet from non DualPoint device");
+		return;
+	}
+
 	/* Sanity check packet */
 	if (!(packet[0] & 0x40)) {
 		psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n");
@@ -699,7 +706,8 @@ static void alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
 
 	alps_report_semi_mt_data(psmouse, fingers);
 
-	if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
+	if ((priv->flags & ALPS_DUALPOINT) &&
+	    !(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
 		input_report_key(dev2, BTN_LEFT, f->ts_left);
 		input_report_key(dev2, BTN_RIGHT, f->ts_right);
 		input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
@@ -743,8 +751,11 @@ static void alps_process_packet_v6(struct psmouse *psmouse)
 	 */
 	if (packet[5] == 0x7F) {
 		/* It should be a DualPoint when received Trackpoint packet */
-		if (!(priv->flags & ALPS_DUALPOINT))
+		if (!(priv->flags & ALPS_DUALPOINT)) {
+			psmouse_warn(psmouse,
+				     "Rejected trackstick packet from non DualPoint device");
 			return;
+		}
 
 		/* Trackpoint packet */
 		x = packet[1] | ((packet[3] & 0x20) << 2);
@@ -1026,6 +1037,13 @@ static void alps_process_trackstick_packet_v7(struct psmouse *psmouse)
 	struct input_dev *dev2 = priv->dev2;
 	int x, y, z, left, right, middle;
 
+	/* It should be a DualPoint when received trackstick packet */
+	if (!(priv->flags & ALPS_DUALPOINT)) {
+		psmouse_warn(psmouse,
+			     "Rejected trackstick packet from non DualPoint device");
+		return;
+	}
+
 	/*
 	 *        b7 b6 b5 b4 b3 b2 b1 b0
 	 * Byte0   0  1  0  0  1  0  0  0
@@ -2443,14 +2461,24 @@ int alps_init(struct psmouse *psmouse)
 		dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
 	}
 
+	if (priv->flags & ALPS_DUALPOINT) {
+		/*
+		 * format of input device name is: "protocol vendor name"
+		 * see function psmouse_switch_protocol() in psmouse-base.c
+		 */
+		dev2->name = "AlpsPS/2 ALPS DualPoint Stick";
+		dev2->id.product = PSMOUSE_ALPS;
+		dev2->id.version = priv->proto_version;
+	} else {
+		dev2->name = "PS/2 ALPS Mouse";
+		dev2->id.product = PSMOUSE_PS2;
+		dev2->id.version = 0x0000;
+	}
+
 	snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
 	dev2->phys = priv->phys;
-	dev2->name = (priv->flags & ALPS_DUALPOINT) ?
-		     "DualPoint Stick" : "ALPS PS/2 Device";
 	dev2->id.bustype = BUS_I8042;
 	dev2->id.vendor  = 0x0002;
-	dev2->id.product = PSMOUSE_ALPS;
-	dev2->id.version = 0x0000;
 	dev2->dev.parent = &psmouse->ps2dev.serio->dev;
 
 	dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);

drivers/input/mouse/bcm5974.c

@@ -564,7 +564,7 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 		dev->index[n++] = &f[i];
 	}
 
-	input_mt_assign_slots(input, dev->slots, dev->pos, n);
+	input_mt_assign_slots(input, dev->slots, dev->pos, n, 0);
 
 	for (i = 0; i < n; i++)
 		report_finger_data(input, dev->slots[i],

drivers/input/mouse/cyapa.h

+/*
+ * Cypress APA trackpad with I2C interface
+ *
+ * Author: Dudley Du <dudl@cypress.com>
+ *
+ * Copyright (C) 2014 Cypress Semiconductor, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef _CYAPA_H
+#define _CYAPA_H
+
+#include <linux/firmware.h>
+
+/* APA trackpad firmware generation number. */
+#define CYAPA_GEN_UNKNOWN   0x00   /* unknown protocol. */
+#define CYAPA_GEN3   0x03   /* support MT-protocol B with tracking ID. */
+#define CYAPA_GEN5   0x05   /* support TrueTouch GEN5 trackpad device. */
+
+#define CYAPA_NAME   "Cypress APA Trackpad (cyapa)"
+
+/*
+ * Macros for SMBus communication
+ */
+#define SMBUS_READ   0x01
+#define SMBUS_WRITE 0x00
+#define SMBUS_ENCODE_IDX(cmd, idx) ((cmd) | (((idx) & 0x03) << 1))
+#define SMBUS_ENCODE_RW(cmd, rw) ((cmd) | ((rw) & 0x01))
+#define SMBUS_BYTE_BLOCK_CMD_MASK 0x80
+#define SMBUS_GROUP_BLOCK_CMD_MASK 0x40
+
+/* Commands for read/write registers of Cypress trackpad */
+#define CYAPA_CMD_SOFT_RESET       0x00
+#define CYAPA_CMD_POWER_MODE       0x01
+#define CYAPA_CMD_DEV_STATUS       0x02
+#define CYAPA_CMD_GROUP_DATA       0x03
+#define CYAPA_CMD_GROUP_CMD        0x04
+#define CYAPA_CMD_GROUP_QUERY      0x05
+#define CYAPA_CMD_BL_STATUS        0x06
+#define CYAPA_CMD_BL_HEAD          0x07
+#define CYAPA_CMD_BL_CMD           0x08
+#define CYAPA_CMD_BL_DATA          0x09
+#define CYAPA_CMD_BL_ALL           0x0a
+#define CYAPA_CMD_BLK_PRODUCT_ID   0x0b
+#define CYAPA_CMD_BLK_HEAD         0x0c
+#define CYAPA_CMD_MAX_BASELINE     0x0d
+#define CYAPA_CMD_MIN_BASELINE     0x0e
+
+#define BL_HEAD_OFFSET 0x00
+#define BL_DATA_OFFSET 0x10
+
+#define BL_STATUS_SIZE  3  /* Length of gen3 bootloader status registers */
+#define CYAPA_REG_MAP_SIZE  256
+
+/*
+ * Gen3 Operational Device Status Register
+ *
+ * bit 7: Valid interrupt source
+ * bit 6 - 4: Reserved
+ * bit 3 - 2: Power status
+ * bit 1 - 0: Device status
+ */
+#define REG_OP_STATUS     0x00
+#define OP_STATUS_SRC     0x80
+#define OP_STATUS_POWER   0x0c
+#define OP_STATUS_DEV     0x03
+#define OP_STATUS_MASK (OP_STATUS_SRC | OP_STATUS_POWER | OP_STATUS_DEV)
+
+/*
+ * Operational Finger Count/Button Flags Register
+ *
+ * bit 7 - 4: Number of touched finger
+ * bit 3: Valid data
+ * bit 2: Middle Physical Button
+ * bit 1: Right Physical Button
+ * bit 0: Left physical Button
+ */
+#define REG_OP_DATA1       0x01
+#define OP_DATA_VALID      0x08
+#define OP_DATA_MIDDLE_BTN 0x04
+#define OP_DATA_RIGHT_BTN  0x02
+#define OP_DATA_LEFT_BTN   0x01
+#define OP_DATA_BTN_MASK (OP_DATA_MIDDLE_BTN | OP_DATA_RIGHT_BTN | \
+			  OP_DATA_LEFT_BTN)
+
+/*
+ * Write-only command file register used to issue commands and
+ * parameters to the bootloader.
+ * The default value read from it is always 0x00.
+ */
+#define REG_BL_FILE	0x00
+#define BL_FILE		0x00
+
+/*
+ * Bootloader Status Register
+ *
+ * bit 7: Busy
+ * bit 6 - 5: Reserved
+ * bit 4: Bootloader running
+ * bit 3 - 2: Reserved
+ * bit 1: Watchdog Reset
+ * bit 0: Checksum valid
+ */
+#define REG_BL_STATUS        0x01
+#define BL_STATUS_REV_6_5    0x60
+#define BL_STATUS_BUSY       0x80
+#define BL_STATUS_RUNNING    0x10
+#define BL_STATUS_REV_3_2    0x0c
+#define BL_STATUS_WATCHDOG   0x02
+#define BL_STATUS_CSUM_VALID 0x01
+#define BL_STATUS_REV_MASK (BL_STATUS_WATCHDOG | BL_STATUS_REV_3_2 | \
+			    BL_STATUS_REV_6_5)
+
+/*
+ * Bootloader Error Register
+ *
+ * bit 7: Invalid
+ * bit 6: Invalid security key
+ * bit 5: Bootloading
+ * bit 4: Command checksum
+ * bit 3: Flash protection error
+ * bit 2: Flash checksum error
+ * bit 1 - 0: Reserved
+ */
+#define REG_BL_ERROR         0x02
+#define BL_ERROR_INVALID     0x80
+#define BL_ERROR_INVALID_KEY 0x40
+#define BL_ERROR_BOOTLOADING 0x20
+#define BL_ERROR_CMD_CSUM    0x10
+#define BL_ERROR_FLASH_PROT  0x08
+#define BL_ERROR_FLASH_CSUM  0x04
+#define BL_ERROR_RESERVED    0x03
+#define BL_ERROR_NO_ERR_IDLE    0x00
+#define BL_ERROR_NO_ERR_ACTIVE  (BL_ERROR_BOOTLOADING)
+
+#define CAPABILITY_BTN_SHIFT            3
+#define CAPABILITY_LEFT_BTN_MASK	(0x01 << 3)
+#define CAPABILITY_RIGHT_BTN_MASK	(0x01 << 4)
+#define CAPABILITY_MIDDLE_BTN_MASK	(0x01 << 5)
+#define CAPABILITY_BTN_MASK  (CAPABILITY_LEFT_BTN_MASK | \
+			      CAPABILITY_RIGHT_BTN_MASK | \
+			      CAPABILITY_MIDDLE_BTN_MASK)
+
+#define PWR_MODE_MASK   0xfc
+#define PWR_MODE_FULL_ACTIVE (0x3f << 2)
+#define PWR_MODE_IDLE        (0x03 << 2) /* Default rt suspend scanrate: 30ms */
+#define PWR_MODE_SLEEP       (0x05 << 2) /* Default suspend scanrate: 50ms */
+#define PWR_MODE_BTN_ONLY    (0x01 << 2)
+#define PWR_MODE_OFF         (0x00 << 2)
+
+#define PWR_STATUS_MASK      0x0c
+#define PWR_STATUS_ACTIVE    (0x03 << 2)
+#define PWR_STATUS_IDLE      (0x02 << 2)
+#define PWR_STATUS_BTN_ONLY  (0x01 << 2)
+#define PWR_STATUS_OFF       (0x00 << 2)
+
+#define AUTOSUSPEND_DELAY   2000 /* unit : ms */
+
+#define UNINIT_SLEEP_TIME 0xFFFF
+#define UNINIT_PWR_MODE   0xFF
+
+#define BTN_ONLY_MODE_NAME   "buttononly"
+#define OFF_MODE_NAME        "off"
+
+/* The touch.id is used as the MT slot id, thus max MT slot is 15 */
+#define CYAPA_MAX_MT_SLOTS  15
+
+struct cyapa;
+
+typedef bool (*cb_sort)(struct cyapa *, u8 *, int);
+
+struct cyapa_dev_ops {
+	int (*check_fw)(struct cyapa *, const struct firmware *);
+	int (*bl_enter)(struct cyapa *);
+	int (*bl_activate)(struct cyapa *);
+	int (*bl_initiate)(struct cyapa *, const struct firmware *);
+	int (*update_fw)(struct cyapa *, const struct firmware *);
+	int (*bl_deactivate)(struct cyapa *);
+
+	ssize_t (*show_baseline)(struct device *,
+			struct device_attribute *, char *);
+	ssize_t (*calibrate_store)(struct device *,
+			struct device_attribute *, const char *, size_t);
+
+	int (*initialize)(struct cyapa *cyapa);
+
+	int (*state_parse)(struct cyapa *cyapa, u8 *reg_status, int len);
+	int (*operational_check)(struct cyapa *cyapa);
+
+	int (*irq_handler)(struct cyapa *);
+	bool (*irq_cmd_handler)(struct cyapa *);
+	int (*sort_empty_output_data)(struct cyapa *,
+			u8 *, int *, cb_sort);
+
+	int (*set_power_mode)(struct cyapa *, u8, u16);
+};
+
+struct cyapa_gen5_cmd_states {
+	struct mutex cmd_lock;
+	struct completion cmd_ready;
+	atomic_t cmd_issued;
+	u8 in_progress_cmd;
+	bool is_irq_mode;
+
+	cb_sort resp_sort_func;
+	u8 *resp_data;
+	int *resp_len;
+
+	u8 irq_cmd_buf[CYAPA_REG_MAP_SIZE];
+	u8 empty_buf[CYAPA_REG_MAP_SIZE];
+};
+
+union cyapa_cmd_states {
+	struct cyapa_gen5_cmd_states gen5;
+};
+
+enum cyapa_state {
+	CYAPA_STATE_NO_DEVICE,
+	CYAPA_STATE_BL_BUSY,
+	CYAPA_STATE_BL_IDLE,
+	CYAPA_STATE_BL_ACTIVE,
+	CYAPA_STATE_OP,
+	CYAPA_STATE_GEN5_BL,
+	CYAPA_STATE_GEN5_APP,
+};
+
+/* The main device structure */
+struct cyapa {
+	enum cyapa_state state;
+	u8 status[BL_STATUS_SIZE];
+	bool operational; /* true: ready for data reporting; false: not. */
+
+	struct i2c_client *client;
+	struct input_dev *input;
+	char phys[32];	/* Device physical location */
+	bool irq_wake;  /* Irq wake is enabled */
+	bool smbus;
+
+	/* power mode settings */
+	u8 suspend_power_mode;
+	u16 suspend_sleep_time;
+	u8 runtime_suspend_power_mode;
+	u16 runtime_suspend_sleep_time;
+	u8 dev_pwr_mode;
+	u16 dev_sleep_time;
+
+	/* Read from query data region. */
+	char product_id[16];
+	u8 fw_maj_ver;  /* Firmware major version. */
+	u8 fw_min_ver;  /* Firmware minor version. */
+	u8 btn_capability;
+	u8 gen;
+	int max_abs_x;
+	int max_abs_y;
+	int physical_size_x;
+	int physical_size_y;
+
+	/* Used in ttsp and truetouch based trackpad devices. */
+	u8 x_origin;  /* X Axis Origin: 0 = left side; 1 = rigth side. */
+	u8 y_origin;  /* Y Axis Origin: 0 = top; 1 = bottom. */
+	int electrodes_x;  /* Number of electrodes on the X Axis*/
+	int electrodes_y;  /* Number of electrodes on the Y Axis*/
+	int electrodes_rx;  /* Number of Rx electrodes */
+	int aligned_electrodes_rx;  /* 4 aligned */
+	int max_z;
+
+	/*
+	 * Used to synchronize the access or update the device state.
+	 * And since update firmware and read firmware image process will take
+	 * quite long time, maybe more than 10 seconds, so use mutex_lock
+	 * to sync and wait other interface and detecting are done or ready.
+	 */
+	struct mutex state_sync_lock;
+
+	const struct cyapa_dev_ops *ops;
+
+	union cyapa_cmd_states cmd_states;
+};
+
+
+ssize_t cyapa_i2c_reg_read_block(struct cyapa *cyapa, u8 reg, size_t len,
+				u8 *values);
+ssize_t cyapa_smbus_read_block(struct cyapa *cyapa, u8 cmd, size_t len,
+				u8 *values);
+
+ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values);
+
+int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout);
+
+u8 cyapa_sleep_time_to_pwr_cmd(u16 sleep_time);
+u16 cyapa_pwr_cmd_to_sleep_time(u8 pwr_mode);
+
+
+extern const char product_id[];
+extern const struct cyapa_dev_ops cyapa_gen3_ops;
+extern const struct cyapa_dev_ops cyapa_gen5_ops;
+
+#endif

drivers/input/mouse/cypress_ps2.c

@@ -538,7 +538,7 @@ static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt)
 		pos[i].y = contact->y;
 	}
 
-	input_mt_assign_slots(input, slots, pos, n);
+	input_mt_assign_slots(input, slots, pos, n, 0);
 
 	for (i = 0; i < n; i++) {
 		contact = &report_data.contacts[i];

drivers/input/mouse/elan_i2c.h

@@ -4,7 +4,6 @@
  * Copyright (c) 2013 ELAN Microelectronics Corp.
  *
  * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
- * Version: 1.5.5
  *
  * Based on cyapa driver:
  * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -33,8 +32,9 @@
 #define ETP_FW_IAP_PAGE_ERR	(1 << 5)
 #define ETP_FW_IAP_INTF_ERR	(1 << 4)
 #define ETP_FW_PAGE_SIZE	64
-#define ETP_FW_PAGE_COUNT	768
-#define ETP_FW_SIZE		(ETP_FW_PAGE_SIZE * ETP_FW_PAGE_COUNT)
+#define ETP_FW_VAILDPAGE_COUNT	768
+#define ETP_FW_SIGNATURE_SIZE	6
+#define ETP_FW_SIGNATURE_ADDRESS	0xBFFA
 
 struct i2c_client;
 struct completion;

drivers/input/mouse/elan_i2c_core.c

@@ -4,7 +4,7 @@
  * Copyright (c) 2013 ELAN Microelectronics Corp.
  *
  * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
- * Version: 1.5.5
+ * Version: 1.5.6
  *
  * Based on cyapa driver:
  * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -40,7 +40,7 @@
 #include "elan_i2c.h"
 
 #define DRIVER_NAME		"elan_i2c"
-#define ELAN_DRIVER_VERSION	"1.5.5"
+#define ELAN_DRIVER_VERSION	"1.5.6"
 #define ETP_PRESSURE_OFFSET	25
 #define ETP_MAX_PRESSURE	255
 #define ETP_FWIDTH_REDUCE	90
@@ -312,7 +312,7 @@ static int __elan_update_firmware(struct elan_tp_data *data,
 	iap_start_addr = get_unaligned_le16(&fw->data[ETP_IAP_START_ADDR * 2]);
 
 	boot_page_count = (iap_start_addr * 2) / ETP_FW_PAGE_SIZE;
-	for (i = boot_page_count; i < ETP_FW_PAGE_COUNT; i++) {
+	for (i = boot_page_count; i < ETP_FW_VAILDPAGE_COUNT; i++) {
 		u16 checksum = 0;
 		const u8 *page = &fw->data[i * ETP_FW_PAGE_SIZE];
 
@@ -434,10 +434,11 @@ static ssize_t elan_sysfs_update_fw(struct device *dev,
 				    struct device_attribute *attr,
 				    const char *buf, size_t count)
 {
-	struct i2c_client *client = to_i2c_client(dev);
-	struct elan_tp_data *data = i2c_get_clientdata(client);
+	struct elan_tp_data *data = dev_get_drvdata(dev);
 	const struct firmware *fw;
 	int error;
+	const u8 *fw_signature;
+	static const u8 signature[] = {0xAA, 0x55, 0xCC, 0x33, 0xFF, 0xFF};
 
 	error = request_firmware(&fw, ETP_FW_NAME, dev);
 	if (error) {
@@ -446,10 +447,12 @@ static ssize_t elan_sysfs_update_fw(struct device *dev,
 		return error;
 	}
 
-	/* Firmware must be exactly PAGE_NUM * PAGE_SIZE bytes */
-	if (fw->size != ETP_FW_SIZE) {
-		dev_err(dev, "invalid firmware size = %zu, expected %d.\n",
-			fw->size, ETP_FW_SIZE);
+	/* Firmware file must match signature data */
+	fw_signature = &fw->data[ETP_FW_SIGNATURE_ADDRESS];
+	if (memcmp(fw_signature, signature, sizeof(signature)) != 0) {
+		dev_err(dev, "signature mismatch (expected %*ph, got %*ph)\n",
+			(int)sizeof(signature), signature,
+			(int)sizeof(signature), fw_signature);
 		error = -EBADF;
 		goto out_release_fw;
 	}

drivers/input/mouse/elan_i2c_i2c.c

@@ -4,7 +4,6 @@
  * Copyright (c) 2013 ELAN Microelectronics Corp.
  *
  * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
- * Version: 1.5.5
  *
  * Based on cyapa driver:
  * copyright (c) 2011-2012 Cypress Semiconductor, Inc.

drivers/input/mouse/elan_i2c_smbus.c

@@ -4,7 +4,6 @@
  * Copyright (c) 2013 ELAN Microelectronics Corp.
  *
  * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
- * Version: 1.5.5
  *
  * Based on cyapa driver:
  * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -71,7 +70,7 @@ static int elan_smbus_initialize(struct i2c_client *client)
 
 	/* compare hello packet */
 	if (memcmp(values, check, ETP_SMBUS_HELLOPACKET_LEN)) {
-		dev_err(&client->dev, "hello packet fail [%*px]\n",
+		dev_err(&client->dev, "hello packet fail [%*ph]\n",
 			ETP_SMBUS_HELLOPACKET_LEN, values);
 		return -ENXIO;
 	}

drivers/input/mouse/focaltech.h

@@ -2,6 +2,7 @@
  * Focaltech TouchPad PS/2 mouse driver
  *
  * Copyright (c) 2014 Red Hat Inc.
+ * Copyright (c) 2014 Mathias Gottschlag <mgottschlag@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,5 +19,6 @@
 
 int focaltech_detect(struct psmouse *psmouse, bool set_properties);
 int focaltech_init(struct psmouse *psmouse);
+bool focaltech_supported(void);
 
 #endif

drivers/input/mouse/psmouse-base.c

@@ -725,9 +725,11 @@ static int psmouse_extensions(struct psmouse *psmouse,
 
 /* Always check for focaltech, this is safe as it uses pnp-id matching */
 	if (psmouse_do_detect(focaltech_detect, psmouse, set_properties) == 0) {
+		if (max_proto > PSMOUSE_IMEX) {
 			if (!set_properties || focaltech_init(psmouse) == 0) {
+				if (focaltech_supported())
+					return PSMOUSE_FOCALTECH;
 				/*
-			 * Not supported yet, use bare protocol.
 				 * Note that we need to also restrict
 				 * psmouse_max_proto so that psmouse_initialize()
 				 * does not try to reset rate and resolution,
@@ -737,6 +739,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
 				return PSMOUSE_PS2;
 			}
 		}
+	}
 
 /*
  * We always check for lifebook because it does not disturb mouse
@@ -1063,6 +1066,15 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.alias		= "cortps",
 		.detect		= cortron_detect,
 	},
+#ifdef CONFIG_MOUSE_PS2_FOCALTECH
+	{
+		.type		= PSMOUSE_FOCALTECH,
+		.name		= "FocalTechPS/2",
+		.alias		= "focaltech",
+		.detect		= focaltech_detect,
+		.init		= focaltech_init,
+	},
+#endif
 	{
 		.type		= PSMOUSE_AUTO,
 		.name		= "auto",

drivers/input/mouse/psmouse.h

@@ -96,6 +96,7 @@ enum psmouse_type {
 	PSMOUSE_FSP,
 	PSMOUSE_SYNAPTICS_RELATIVE,
 	PSMOUSE_CYPRESS,
+	PSMOUSE_FOCALTECH,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 

drivers/input/mouse/synaptics.h

@@ -118,16 +118,6 @@
 /* amount to fuzz position data when touchpad reports reduced filtering */
 #define SYN_REDUCED_FILTER_FUZZ		8
 
-/*
- * A structure to describe which internal touchpad finger slots are being
- * reported in raw packets.
- */
-struct synaptics_mt_state {
-	int count;			/* num fingers being tracked */
-	int sgm;			/* which slot is reported by sgm pkt */
-	int agm;			/* which slot is reported by agm pkt*/
-};
-
 /*
  * A structure to describe the state of the touchpad hardware (buttons and pad)
  */
@@ -143,9 +133,6 @@ struct synaptics_hw_state {
 	unsigned int down:1;
 	unsigned char ext_buttons;
 	signed char scroll;
-
-	/* As reported in last AGM-CONTACT packets */
-	struct synaptics_mt_state mt_state;
 };
 
 struct synaptics_data {
@@ -170,15 +157,12 @@ struct synaptics_data {
 
 	struct serio *pt_port;			/* Pass-through serio port */
 
-	struct synaptics_mt_state mt_state;	/* Current mt finger state */
-	bool mt_state_lost;			/* mt_state may be incorrect */
-
 	/*
 	 * Last received Advanced Gesture Mode (AGM) packet. An AGM packet
 	 * contains position data for a second contact, at half resolution.
 	 */
 	struct synaptics_hw_state agm;
-	bool agm_pending;			/* new AGM packet received */
+	unsigned int agm_count;			/* finger count reported by agm */
 
 	/* ForcePad handling */
 	unsigned long				press_start;

drivers/input/serio/Kconfig

@@ -281,4 +281,14 @@ config HYPERV_KEYBOARD
 	  To compile this driver as a module, choose M here: the module will
 	  be called hyperv_keyboard.
 
+config SERIO_SUN4I_PS2
+	tristate "Allwinner A10 PS/2 controller support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	help
+	  This selects support for the PS/2 Host Controller on
+	  Allwinner A10.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun4i-ps2.
+
 endif

drivers/input/serio/Makefile

@@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2)	+= arc_ps2.o
 obj-$(CONFIG_SERIO_APBPS2)	+= apbps2.o
 obj-$(CONFIG_SERIO_OLPC_APSP)	+= olpc_apsp.o
 obj-$(CONFIG_HYPERV_KEYBOARD)	+= hyperv-keyboard.o
+obj-$(CONFIG_SERIO_SUN4I_PS2)	+= sun4i-ps2.o

drivers/input/serio/gscps2.c

@@ -40,7 +40,6 @@
 MODULE_AUTHOR("Laurent Canet <canetl@esiee.fr>, Thibaut Varene <varenet@parisc-linux.org>, Helge Deller <deller@gmx.de>");
 MODULE_DESCRIPTION("HP GSC PS2 port driver");
 MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(parisc, gscps2_device_tbl);
 
 #define PFX "gscps2.c: "
 
@@ -439,6 +438,7 @@ static struct parisc_device_id gscps2_device_tbl[] = {
 #endif
 	{ 0, }	/* 0 terminated list */
 };
+MODULE_DEVICE_TABLE(parisc, gscps2_device_tbl);
 
 static struct parisc_driver parisc_ps2_driver = {
 	.name		= "gsc_ps2",

drivers/input/tablet/gtco.c

@@ -59,7 +59,7 @@ Scott Hill shill@gtcocalcomp.com
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
-
+#include <linux/bitops.h>
 
 #include <linux/usb/input.h>
 
@@ -614,7 +614,6 @@ static void gtco_urb_callback(struct urb *urbinfo)
 	struct input_dev  *inputdev;
 	int               rc;
 	u32               val = 0;
-	s8                valsigned = 0;
 	char              le_buffer[2];
 
 	inputdev = device->inputdevice;
@@ -665,20 +664,11 @@ static void gtco_urb_callback(struct urb *urbinfo)
 			/* Fall thru */
 		case 4:
 			/* Tilt */
+			input_report_abs(inputdev, ABS_TILT_X,
+					 sign_extend32(device->buffer[6], 6));
 
-			/* Sign extend these 7 bit numbers.  */
-			if (device->buffer[6] & 0x40)
-				device->buffer[6] |= 0x80;
-
-			if (device->buffer[7] & 0x40)
-				device->buffer[7] |= 0x80;
-
-
-			valsigned = (device->buffer[6]);
-			input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned);
-
-			valsigned = (device->buffer[7]);
-			input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned);
+			input_report_abs(inputdev, ABS_TILT_Y,
+					 sign_extend32(device->buffer[7], 6));
 
 			/* Fall thru */
 		case 2:

drivers/input/touchscreen/elants_i2c.c

@@ -33,10 +33,8 @@
 #include <linux/delay.h>
 #include <linux/uaccess.h>
 #include <linux/buffer_head.h>
-#include <linux/version.h>
 #include <linux/slab.h>
 #include <linux/firmware.h>
-#include <linux/version.h>
 #include <linux/input/mt.h>
 #include <linux/acpi.h>
 #include <linux/of.h>

drivers/input/touchscreen/pixcir_i2c_ts.c

@@ -126,7 +126,7 @@ static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
 			pos[i].y = touch->y;
 		}
 
-		input_mt_assign_slots(ts->input, slots, pos, n);
+		input_mt_assign_slots(ts->input, slots, pos, n, 0);
 	}
 
 	for (i = 0; i < n; i++) {

include/linux/input/mt.h

@@ -119,7 +119,8 @@ struct input_mt_pos {
 };
 
 int input_mt_assign_slots(struct input_dev *dev, int *slots,
-			  const struct input_mt_pos *pos, int num_pos);
+			  const struct input_mt_pos *pos, int num_pos,
+			  int dmax);
 
 int input_mt_get_slot_by_key(struct input_dev *dev, int key);
 

include/linux/mfd/ti_am335x_tscadc.h

@@ -52,6 +52,7 @@
 
 /* IRQ enable */
 #define IRQENB_HW_PEN		BIT(0)
+#define IRQENB_EOS		BIT(1)
 #define IRQENB_FIFO0THRES	BIT(2)
 #define IRQENB_FIFO0OVRRUN	BIT(3)
 #define IRQENB_FIFO0UNDRFLW	BIT(4)
@@ -107,7 +108,7 @@
 /* Charge delay */
 #define CHARGEDLY_OPEN_MASK	(0x3FFFF << 0)
 #define CHARGEDLY_OPEN(val)	((val) << 0)
-#define CHARGEDLY_OPENDLY	CHARGEDLY_OPEN(1)
+#define CHARGEDLY_OPENDLY	CHARGEDLY_OPEN(0x400)
 
 /* Control register */
 #define CNTRLREG_TSCSSENB	BIT(0)