usb: r8a66597-hcd platform data on_chip support

Convert the r8a66597-hcd driver to use the on_chip flag
from platform data to enable on chip behaviour instead
of relying on CONFIG_SUPERH_ON_CHIP_R8A66597 ugliness.

This makes the code cleaner and also allows us to support
both external and internal r8a66597 with the same kernel.

It also makes the Kconfig part more future proof since
we with this patch can add support for new processors
with on-chip r8a66597 without modifying the Kconfig.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/mach-se/7724/setup.c

@@ -304,6 +304,7 @@ static struct platform_device sh_eth_device = {
 };
 
 static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
 };
 
 static struct resource sh7724_usb0_host_resources[] = {

arch/sh/kernel/cpu/sh4a/setup-sh7366.c

@@ -40,7 +40,7 @@ static struct platform_device iic_device = {
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource usb_host_resources[] = {

arch/sh/kernel/cpu/sh4a/setup-sh7723.c

@@ -398,7 +398,7 @@ static struct platform_device rtc_device = {
 };
 
 static struct r8a66597_platdata r8a66597_data = {
-	/* This set zero to all members */
+	.on_chip = 1,
 };
 
 static struct resource sh7723_usb_host_resources[] = {

drivers/usb/host/Kconfig

@@ -336,13 +336,6 @@ config USB_R8A66597_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called r8a66597-hcd.
 
-config SUPERH_ON_CHIP_R8A66597
-	boolean "Enable SuperH on-chip R8A66597 USB"
-	depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7724)
-	help
-	   This driver enables support for the on-chip R8A66597 in the
-	   SH7366, SH7723 and SH7724 processors.
-
 config USB_WHCI_HCD
 	tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)"
 	depends on EXPERIMENTAL

drivers/usb/host/r8a66597.h

@@ -26,7 +26,7 @@
 #ifndef __R8A66597_H__
 #define __R8A66597_H__
 
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 #include <linux/clk.h>
 #endif
 
@@ -193,13 +193,9 @@
 #define	REW		0x4000	/* b14: Buffer rewind */
 #define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
 #define	DREQE		0x1000	/* b12: DREQ output enable */
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define	MBW		0x0800
-#else
-#define	MBW		0x0400	/* b10: Maximum bit width for FIFO access */
-#endif
 #define	  MBW_8		 0x0000	  /*  8bit */
 #define	  MBW_16	 0x0400	  /* 16bit */
+#define	  MBW_32	 0x0800   /* 32bit */
 #define	BIGEND		0x0100	/* b8: Big endian mode */
 #define	  BYTE_LITTLE	 0x0000		/* little dendian */
 #define	  BYTE_BIG	 0x0100		/* big endifan */
@@ -405,11 +401,7 @@
 #define R8A66597_MAX_NUM_PIPE		10
 #define R8A66597_BUF_BSIZE		8
 #define R8A66597_MAX_DEVICE		10
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define R8A66597_MAX_ROOT_HUB		1
-#else
 #define R8A66597_MAX_ROOT_HUB		2
-#endif
 #define R8A66597_MAX_SAMPLING		5
 #define R8A66597_RH_POLL_TIME		10
 #define R8A66597_MAX_DMA_CHANNEL	2
@@ -487,7 +479,7 @@ struct r8a66597_root_hub {
 struct r8a66597 {
 	spinlock_t lock;
 	unsigned long reg;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
 	struct clk *clk;
 #endif
 	struct r8a66597_platdata	*pdata;
@@ -504,6 +496,7 @@ struct r8a66597 {
 	unsigned short interval_map;
 	unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
 	unsigned char dma_map;
+	unsigned int max_root_hub;
 
 	struct list_head child_device;
 	unsigned long child_connect_map[4];
@@ -550,21 +543,22 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
 				      unsigned long offset, u16 *buf,
 				      int len)
 {
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long fifoaddr = r8a66597->reg + offset;
 	unsigned long count;
 
+	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
 		insl(fifoaddr, buf, count);
 
 		if (len & 0x00000003) {
 			unsigned long tmp = inl(fifoaddr);
-		memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
+			memcpy((unsigned char *)buf + count * 4, &tmp,
+			       len & 0x03);
 		}
-#else
+	} else {
 		len = (len + 1) / 2;
-	insw(r8a66597->reg + offset, buf, len);
-#endif
+		insw(fifoaddr, buf, len);
+	}
 }
 
 static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
@@ -578,11 +572,11 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 				       int len)
 {
 	unsigned long fifoaddr = r8a66597->reg + offset;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
 	unsigned long count;
 	unsigned char *pb;
 	int i;
 
+	if (r8a66597->pdata->on_chip) {
 		count = len / 4;
 		outsl(fifoaddr, buf, count);
 
@@ -595,7 +589,7 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 					outb(pb[i], fifoaddr + 3 - i);
 			}
 		}
-#else
+	} else {
 		int odd = len & 0x0001;
 
 		len = len / 2;
@@ -604,7 +598,7 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
 			buf = &buf[len];
 			outb((unsigned char)*buf, fifoaddr);
 		}
-#endif
+	}
 }
 
 static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,

include/linux/usb/r8a66597.h

@@ -31,6 +31,9 @@ struct r8a66597_platdata {
 	/* This ops can controll port power instead of DVSTCTR register. */
 	void (*port_power)(int port, int power);
 
+	/* set one = on chip controller, set zero = external controller */
+	unsigned	on_chip:1;
+
 	/* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
 	unsigned	xtal:2;