crypto: omap-aes - Don't reset controller for every operation

The AES controller only needs to be reset once and that will
be done by the hwmod infrastructure, if possible.  Therefore,
remove the reset code from the omap-aes driver.

CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/omap-aes.c

@@ -160,19 +160,6 @@ static void omap_aes_write_n(struct omap_aes_dev *dd, u32 offset,
 		omap_aes_write(dd, offset, *value);
 }
 
-static int omap_aes_wait(struct omap_aes_dev *dd, u32 offset, u32 bit)
-{
-	unsigned long timeout = jiffies + DEFAULT_TIMEOUT;
-
-	while (!(omap_aes_read(dd, offset) & bit)) {
-		if (time_is_before_jiffies(timeout)) {
-			dev_err(dd->dev, "omap-aes timeout\n");
-			return -ETIMEDOUT;
-		}
-	}
-	return 0;
-}
-
 static int omap_aes_hw_init(struct omap_aes_dev *dd)
 {
 	/*
@@ -183,20 +170,6 @@ static int omap_aes_hw_init(struct omap_aes_dev *dd)
 	clk_enable(dd->iclk);
 
 	if (!(dd->flags & FLAGS_INIT)) {
-		/* is it necessary to reset before every operation? */
-		omap_aes_write_mask(dd, AES_REG_MASK, AES_REG_MASK_SOFTRESET,
-					AES_REG_MASK_SOFTRESET);
-		/*
-		 * prevent OCP bus error (SRESP) in case an access to the module
-		 * is performed while the module is coming out of soft reset
-		 */
-		__asm__ __volatile__("nop");
-		__asm__ __volatile__("nop");
-
-		if (omap_aes_wait(dd, AES_REG_SYSSTATUS,
-				AES_REG_SYSSTATUS_RESETDONE))
-			return -ETIMEDOUT;
-
 		dd->flags |= FLAGS_INIT;
 		dd->err = 0;
 	}