Commit 72a43046 authored by Chanho Park's avatar Chanho Park Committed by Greg Kroah-Hartman

tty: serial: samsung_tty: loopback mode support

Internal loopback mode can be supported by setting
UCON register's Loopback Mode bit. The mode & bit can be supported
since s3c2410 and later SoCs. The prefix of LOOPBACK / BIT(5) naming
should be also changed to S3C2410_ in order to avoid confusion.
Reviewed-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: default avatarIlpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: default avatarChanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20220629004141.51484-1-chanho61.park@samsung.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 9636047f
...@@ -1018,6 +1018,7 @@ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) ...@@ -1018,6 +1018,7 @@ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
{ {
unsigned int umcon = rd_regl(port, S3C2410_UMCON); unsigned int umcon = rd_regl(port, S3C2410_UMCON);
unsigned int ucon = rd_reg(port, S3C2410_UCON);
if (mctrl & TIOCM_RTS) if (mctrl & TIOCM_RTS)
umcon |= S3C2410_UMCOM_RTS_LOW; umcon |= S3C2410_UMCOM_RTS_LOW;
...@@ -1025,6 +1026,13 @@ static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) ...@@ -1025,6 +1026,13 @@ static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
umcon &= ~S3C2410_UMCOM_RTS_LOW; umcon &= ~S3C2410_UMCOM_RTS_LOW;
wr_regl(port, S3C2410_UMCON, umcon); wr_regl(port, S3C2410_UMCON, umcon);
if (mctrl & TIOCM_LOOP)
ucon |= S3C2410_UCON_LOOPBACK;
else
ucon &= ~S3C2410_UCON_LOOPBACK;
wr_regl(port, S3C2410_UCON, ucon);
} }
static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
......
...@@ -83,7 +83,7 @@ ...@@ -83,7 +83,7 @@
#define S3C2410_UCON_RXIRQMODE (1<<0) #define S3C2410_UCON_RXIRQMODE (1<<0)
#define S3C2410_UCON_RXFIFO_TOI (1<<7) #define S3C2410_UCON_RXFIFO_TOI (1<<7)
#define S3C2443_UCON_RXERR_IRQEN (1<<6) #define S3C2443_UCON_RXERR_IRQEN (1<<6)
#define S3C2443_UCON_LOOPBACK (1<<5) #define S3C2410_UCON_LOOPBACK (1<<5)
#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ #define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \ S3C2410_UCON_RXILEVEL | \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment