Merge branch 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux

Pull pcmcia fixes from Dominik Brodowski:
 "These are just a few odd fixes and improvements to the PCMCIA core and
  to a few PCMCIA device drivers"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: Implement CLKRUN protocol disabling for Ricoh bridges
  pcmcia: pcmcia_resource: Replace mdelay() with msleep()
  pcmcia: add error handling for pcmcia_enable_device in qlogic_stub
  char: pcmcia: cm4000_cs: Replace mdelay with usleep_range in set_protocol
  pcmcia: Use module_pcmcia_driver for scsi drivers
  pcmcia: remove KERN_INFO level from debug message

drivers/char/pcmcia/cm4000_cs.c

@@ -530,7 +530,7 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
 			DEBUGP(5, dev, "NumRecBytes is valid\n");
 			break;
 		}
-		mdelay(10);
+		usleep_range(10000, 11000);
 	}
 	if (i == 100) {
 		DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting "
@@ -546,7 +546,7 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
 			DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read);
 			break;
 		}
-		mdelay(10);
+		usleep_range(10000, 11000);
 	}
 
 	/* check whether it is a short PTS reply? */

drivers/char/pcmcia/cm4040_cs.c

@@ -505,7 +505,7 @@ static void cm4040_reader_release(struct pcmcia_device *link)
 
 	DEBUGP(3, dev, "-> cm4040_reader_release\n");
 	while (link->open) {
-		DEBUGP(3, dev, KERN_INFO MODULE_NAME ": delaying release "
+		DEBUGP(3, dev, MODULE_NAME ": delaying release "
 		       "until process has terminated\n");
  		wait_event(dev->devq, (link->open == 0));
 	}

drivers/pcmcia/pcmcia_resource.c

@@ -284,7 +284,7 @@ int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev)
 		io_on.stop = s->io[i].res->end;
 
 		s->ops->set_io_map(s, &io_off);
-		mdelay(40);
+		msleep(40);
 		s->ops->set_io_map(s, &io_on);
 	}
 unlock:
@@ -567,7 +567,7 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
 			!(flags & CONF_ENABLE_PULSE_IRQ))
 			option |= COR_LEVEL_REQ;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option);
-		mdelay(40);
+		msleep(40);
 	}
 	if (p_dev->config_regs & PRESENT_STATUS)
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status);

drivers/pcmcia/ricoh.h

@@ -119,6 +119,10 @@
 #define  RL5C4XX_MISC_CONTROL           0x2F /* 8 bit */
 #define  RL5C4XX_ZV_ENABLE              0x08
 
+/* Misc Control 3 Register */
+#define RL5C4XX_MISC3			0x00A2 /* 16 bit */
+#define  RL5C47X_MISC3_CB_CLKRUN_DIS	BIT(1)
+
 #ifdef __YENTA_H
 
 #define rl_misc(socket)		((socket)->private[0])
@@ -156,6 +160,35 @@ static void ricoh_set_zv(struct yenta_socket *socket)
         }
 }
 
+static void ricoh_set_clkrun(struct yenta_socket *socket, bool quiet)
+{
+	u16 misc3;
+
+	/*
+	 * RL5C475II likely has this setting, too, however no datasheet
+	 * is publicly available for this chip
+	 */
+	if (socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C476 &&
+	    socket->dev->device != PCI_DEVICE_ID_RICOH_RL5C478)
+		return;
+
+	if (socket->dev->revision < 0x80)
+		return;
+
+	misc3 = config_readw(socket, RL5C4XX_MISC3);
+	if (misc3 & RL5C47X_MISC3_CB_CLKRUN_DIS) {
+		if (!quiet)
+			dev_dbg(&socket->dev->dev,
+				"CLKRUN feature already disabled\n");
+	} else if (disable_clkrun) {
+		if (!quiet)
+			dev_info(&socket->dev->dev,
+				 "Disabling CLKRUN feature\n");
+		misc3 |= RL5C47X_MISC3_CB_CLKRUN_DIS;
+		config_writew(socket, RL5C4XX_MISC3, misc3);
+	}
+}
+
 static void ricoh_save_state(struct yenta_socket *socket)
 {
 	rl_misc(socket) = config_readw(socket, RL5C4XX_MISC);
@@ -172,6 +205,7 @@ static void ricoh_restore_state(struct yenta_socket *socket)
 	config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket));
 	config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket));
 	config_writew(socket, RL5C4XX_CONFIG, rl_config(socket));
+	ricoh_set_clkrun(socket, true);
 }
 
 
@@ -197,6 +231,7 @@ static int ricoh_override(struct yenta_socket *socket)
 	config_writew(socket, RL5C4XX_CONFIG, config);
 
 	ricoh_set_zv(socket);
+	ricoh_set_clkrun(socket, false);
 
 	return 0;
 }

drivers/pcmcia/yenta_socket.c

@@ -26,7 +26,8 @@
 
 static bool disable_clkrun;
 module_param(disable_clkrun, bool, 0444);
-MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option");
+MODULE_PARM_DESC(disable_clkrun,
+		 "If PC card doesn't function properly, please try this option (TI and Ricoh bridges only)");
 
 static bool isa_probe = 1;
 module_param(isa_probe, bool, 0444);

drivers/scsi/pcmcia/aha152x_stub.c

@@ -220,16 +220,4 @@ static struct pcmcia_driver aha152x_cs_driver = {
 	.id_table       = aha152x_ids,
 	.resume		= aha152x_resume,
 };
-
-static int __init init_aha152x_cs(void)
-{
-	return pcmcia_register_driver(&aha152x_cs_driver);
-}
-
-static void __exit exit_aha152x_cs(void)
-{
-	pcmcia_unregister_driver(&aha152x_cs_driver);
-}
-
-module_init(init_aha152x_cs);
-module_exit(exit_aha152x_cs);
+module_pcmcia_driver(aha152x_cs_driver);

drivers/scsi/pcmcia/nsp_cs.c

@@ -1742,19 +1742,6 @@ static struct pcmcia_driver nsp_driver = {
 	.suspend	= nsp_cs_suspend,
 	.resume		= nsp_cs_resume,
 };
-
-static int __init nsp_cs_init(void)
-{
-	return pcmcia_register_driver(&nsp_driver);
-}
-
-static void __exit nsp_cs_exit(void)
-{
-	pcmcia_unregister_driver(&nsp_driver);
-}
-
-
-module_init(nsp_cs_init)
-module_exit(nsp_cs_exit)
+module_pcmcia_driver(nsp_driver);
 
 /* end */

drivers/scsi/pcmcia/nsp_cs.h

@@ -326,10 +326,6 @@ static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht);
 /* Interrupt handler */
 //static irqreturn_t nspintr(int irq, void *dev_id);
 
-/* Module entry point*/
-static int  __init nsp_cs_init(void);
-static void __exit nsp_cs_exit(void);
-
 /* Debug */
 #ifdef NSP_DEBUG
 static void show_command (struct scsi_cmnd *SCpnt);

drivers/scsi/pcmcia/qlogic_stub.c

@@ -254,8 +254,12 @@ static void qlogic_release(struct pcmcia_device *link)
 static int qlogic_resume(struct pcmcia_device *link)
 {
 	scsi_info_t *info = link->priv;
+	int ret;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		return ret;
 
-	pcmcia_enable_device(link);
 	if ((info->manf_id == MANFID_MACNICA) ||
 	    (info->manf_id == MANFID_PIONEER) ||
 	    (info->manf_id == 0x0098)) {
@@ -300,18 +304,7 @@ static struct pcmcia_driver qlogic_cs_driver = {
 	.resume		= qlogic_resume,
 };
 
-static int __init init_qlogic_cs(void)
-{
-	return pcmcia_register_driver(&qlogic_cs_driver);
-}
-
-static void __exit exit_qlogic_cs(void)
-{
-	pcmcia_unregister_driver(&qlogic_cs_driver);
-}
-
 MODULE_AUTHOR("Tom Zerucha, Michael Griffith");
 MODULE_DESCRIPTION("Driver for the PCMCIA Qlogic FAS SCSI controllers");
 MODULE_LICENSE("GPL");
-module_init(init_qlogic_cs);
-module_exit(exit_qlogic_cs);
+module_pcmcia_driver(qlogic_cs_driver);

drivers/scsi/pcmcia/sym53c500_cs.c

@@ -880,18 +880,4 @@ static struct pcmcia_driver sym53c500_cs_driver = {
 	.id_table       = sym53c500_ids,
 	.resume		= sym53c500_resume,
 };
-
-static int __init
-init_sym53c500_cs(void)
-{
-	return pcmcia_register_driver(&sym53c500_cs_driver);
-}
-
-static void __exit
-exit_sym53c500_cs(void)
-{
-	pcmcia_unregister_driver(&sym53c500_cs_driver);
-}
-
-module_init(init_sym53c500_cs);
-module_exit(exit_sym53c500_cs);
+module_pcmcia_driver(sym53c500_cs_driver);