platform/x86: intel_cht_int33fe: Move to its own subfolder

Since we have started collecting Intel x86 specific drivers in their own
folder, move intel_cht_int33fe to its own subfolder there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-8-andriy.shevchenko@linux.intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

drivers/platform/x86/Kconfig

@@ -687,30 +687,6 @@ config INTEL_ATOMISP2_PM
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_atomisp2_pm.
 
-config INTEL_CHT_INT33FE
-	tristate "Intel Cherry Trail ACPI INT33FE Driver"
-	depends on X86 && ACPI && I2C && REGULATOR
-	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
-	depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
-	depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
-	help
-	  This driver add support for the INT33FE ACPI device found on
-	  some Intel Cherry Trail devices.
-
-	  There are two kinds of INT33FE ACPI device possible: for hardware
-	  with USB Type-C and Micro-B connectors. This driver supports both.
-
-	  The INT33FE ACPI device has a CRS table with I2cSerialBusV2
-	  resources for Fuel Gauge Controller and (in the Type-C variant)
-	  FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
-	  This driver instantiates i2c-clients for these, so that standard
-	  i2c drivers for these chips can bind to the them.
-
-	  If you enable this driver it is advised to also select
-	  CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
-	  device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
-	  for Type-C device.
-
 config INTEL_HID_EVENT
 	tristate "INTEL HID Event"
 	depends on ACPI

drivers/platform/x86/Makefile

@@ -70,10 +70,6 @@ obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL)		+= intel/
 
 obj-$(CONFIG_INTEL_ATOMISP2_LED)	+= intel_atomisp2_led.o
 obj-$(CONFIG_INTEL_ATOMISP2_PM)		+= intel_atomisp2_pm.o
-obj-$(CONFIG_INTEL_CHT_INT33FE)		+= intel_cht_int33fe.o
-intel_cht_int33fe-objs			:= intel_cht_int33fe_common.o \
-					   intel_cht_int33fe_typec.o \
-					   intel_cht_int33fe_microb.o
 obj-$(CONFIG_INTEL_HID_EVENT)		+= intel-hid.o
 obj-$(CONFIG_INTEL_INT0002_VGPIO)	+= intel_int0002_vgpio.o
 obj-$(CONFIG_INTEL_MENLOW)		+= intel_menlow.o

drivers/platform/x86/intel/Kconfig

@@ -16,6 +16,7 @@ menuconfig X86_PLATFORM_DRIVERS_INTEL
 
 if X86_PLATFORM_DRIVERS_INTEL
 
+source "drivers/platform/x86/intel/int33fe/Kconfig"
 source "drivers/platform/x86/intel/int3472/Kconfig"
 
 endif # X86_PLATFORM_DRIVERS_INTEL

drivers/platform/x86/intel/Makefile

@@ -4,4 +4,5 @@
 # Intel x86 Platform-Specific Drivers
 #
 
+obj-$(CONFIG_INTEL_CHT_INT33FE)		+= int33fe/
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/

drivers/platform/x86/intel/int33fe/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+config INTEL_CHT_INT33FE
+	tristate "Intel Cherry Trail ACPI INT33FE Driver"
+	depends on X86 && ACPI && I2C && REGULATOR
+	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
+	depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
+	depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
+	help
+	  This driver add support for the INT33FE ACPI device found on
+	  some Intel Cherry Trail devices.
+
+	  There are two kinds of INT33FE ACPI device possible: for hardware
+	  with USB Type-C and Micro-B connectors. This driver supports both.
+
+	  The INT33FE ACPI device has a CRS table with I2cSerialBusV2
+	  resources for Fuel Gauge Controller and (in the Type-C variant)
+	  FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
+	  This driver instantiates i2c-clients for these, so that standard
+	  i2c drivers for these chips can bind to the them.
+
+	  If you enable this driver it is advised to also select
+	  CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
+	  device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
+	  for Type-C device.

drivers/platform/x86/intel/int33fe/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_INTEL_CHT_INT33FE)		+= intel_cht_int33fe.o
+intel_cht_int33fe-objs			:= intel_cht_int33fe_common.o \
+					   intel_cht_int33fe_typec.o \
+					   intel_cht_int33fe_microb.o