dt-bindings: watchdog: qcom-wdt: merge MSM timer

Merge Qualcomm MSM timer bindings into watchdog, because the timer
compatibles are already included here and the hardware is quite similar.

While converting the MSM timer bindings, adjust clock-frequency
property to take only one frequency, instead of two, because:
1. DT schema does not allow to frequencies,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-6-krzysztof.kozlowski@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

Documentation/devicetree/bindings/timer/qcom,msm-timer.txt

-* MSM Timer
-
-Properties:
-
-- compatible : Should at least contain "qcom,msm-timer". More specific
-               properties specify which subsystem the timers are paired with.
-
-               "qcom,kpss-timer" - krait subsystem
-               "qcom,scss-timer" - scorpion subsystem
-
-- interrupts : Interrupts for the debug timer, the first general purpose
-               timer, and optionally a second general purpose timer, and
-               optionally as well, 2 watchdog interrupts, in that order.
-
-- reg : Specifies the base address of the timer registers.
-
-- clocks: Reference to the parent clocks, one per output clock. The parents
-          must appear in the same order as the clock names.
-
-- clock-names: The name of the clocks as free-form strings. They should be in
-               the same order as the clocks.
-
-- clock-frequency : The frequency of the debug timer and the general purpose
-                    timer(s) in Hz in that order.
-
-Optional:
-
-- cpu-offset : per-cpu offset used when the timer is accessed without the
-               CPU remapping facilities. The offset is
-               cpu-offset + (0x10000 * cpu-nr).
-
-Example:
-
-       timer@200a000 {
-               compatible = "qcom,scss-timer", "qcom,msm-timer";
-               interrupts = <1 1 0x301>,
-                            <1 2 0x301>,
-                            <1 3 0x301>,
-                            <1 4 0x301>,
-                            <1 5 0x301>;
-               reg = <0x0200a000 0x100>;
-               clock-frequency = <19200000>,
-                                 <32768>;
-               clocks = <&sleep_clk>;
-               clock-names = "sleep";
-               cpu-offset = <0x40000>;
-       };

Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml

@@ -10,6 +10,9 @@ maintainers:
   - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
 
 properties:
+  $nodename:
+    pattern: "^(watchdog|timer)@[0-9a-f]+$"
+
   compatible:
     oneOf:
       - items:
@@ -48,6 +51,20 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: sleep
+
+  clock-frequency:
+    description:
+      The frequency of the general purpose timer in Hz.
+
+  cpu-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Per-CPU offset used when the timer is accessed without the CPU remapping
+      facilities. The offset is cpu-offset + (0x10000 * cpu-nr).
+
   interrupts:
     minItems: 1
     maxItems: 5
@@ -67,12 +84,27 @@ allOf:
             const: qcom,kpss-wdt
     then:
       properties:
+        clock-frequency: false
+        cpu-offset: false
         interrupts:
           minItems: 1
           items:
             - description: Bark
             - description: Bite
 
+    else:
+      properties:
+        interrupts:
+          minItems: 3
+          items:
+            - description: Debug
+            - description: First general purpose timer
+            - description: Second general purpose timer
+            - description: First watchdog
+            - description: Second watchdog
+      required:
+        - clock-frequency
+
 unevaluatedProperties: false
 
 examples:
@@ -86,3 +118,20 @@ examples:
       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
       timeout-sec = <10>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    watchdog@200a000 {
+      compatible = "qcom,kpss-wdt-ipq8064", "qcom,kpss-timer", "qcom,msm-timer";
+      interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>,
+                   <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
+      reg = <0x0200a000 0x100>;
+      clock-frequency = <25000000>;
+      clocks = <&sleep_clk>;
+      clock-names = "sleep";
+      cpu-offset = <0x80000>;
+    };