Merge branch 'ethtool-fix-use-of-SPEED_UNKNOWN-constant'

Michael Zhivich says:

====================
ethtool: fix use of SPEED_UNKNOWN constant

This patch series addresses 2 related issues:

1. ethtool_validate_speed() triggers a "signed-unsigned comparison"
warning due to type difference of SPEED_UNKNOWN constant (int)
and argument to ethtool_validate_speed (__u32).

2. some drivers use u16 storage for SPEED_UNKNOWN constant,
resulting in value truncation and thus failure to test against
SPEED_UNKNOWN correctly.

This revised series addresses several feedback comments:
- split up the patch in to series
- do not unnecessarily change drivers that use "int" storage
  for speed values
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/tg3.c

@@ -4283,7 +4283,7 @@ static void tg3_power_down(struct tg3 *tp)
 	pci_set_power_state(tp->pdev, PCI_D3hot);
 }
 
-static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
+static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u32 *speed, u8 *duplex)
 {
 	switch (val & MII_TG3_AUX_STAT_SPDMASK) {
 	case MII_TG3_AUX_STAT_10HALF:
@@ -4787,7 +4787,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, bool force_reset)
 	bool current_link_up;
 	u32 bmsr, val;
 	u32 lcl_adv, rmt_adv;
-	u16 current_speed;
+	u32 current_speed;
 	u8 current_duplex;
 	int i, err;
 
@@ -5719,7 +5719,7 @@ static bool tg3_setup_fiber_by_hand(struct tg3 *tp, u32 mac_status)
 static int tg3_setup_fiber_phy(struct tg3 *tp, bool force_reset)
 {
 	u32 orig_pause_cfg;
-	u16 orig_active_speed;
+	u32 orig_active_speed;
 	u8 orig_active_duplex;
 	u32 mac_status;
 	bool current_link_up;
@@ -5823,7 +5823,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, bool force_reset)
 {
 	int err = 0;
 	u32 bmsr, bmcr;
-	u16 current_speed = SPEED_UNKNOWN;
+	u32 current_speed = SPEED_UNKNOWN;
 	u8 current_duplex = DUPLEX_UNKNOWN;
 	bool current_link_up = false;
 	u32 local_adv, remote_adv, sgsr;

drivers/net/ethernet/broadcom/tg3.h

@@ -2873,7 +2873,7 @@ struct tg3_tx_ring_info {
 struct tg3_link_config {
 	/* Describes what we're trying to get. */
 	u32				advertising;
-	u16				speed;
+	u32				speed;
 	u8				duplex;
 	u8				autoneg;
 	u8				flowctrl;
@@ -2882,7 +2882,7 @@ struct tg3_link_config {
 	u8				active_flowctrl;
 
 	u8				active_duplex;
-	u16				active_speed;
+	u32				active_speed;
 	u32				rmt_adv;
 };
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -497,7 +497,7 @@ struct qlcnic_hardware_context {
 	u16 board_type;
 	u16 supported_type;
 
-	u16 link_speed;
+	u32 link_speed;
 	u16 link_duplex;
 	u16 link_autoneg;
 	u16 module_type;

include/uapi/linux/ethtool.h

@@ -1591,7 +1591,7 @@ enum ethtool_link_mode_bit_indices {
 
 static inline int ethtool_validate_speed(__u32 speed)
 {
-	return speed <= INT_MAX || speed == SPEED_UNKNOWN;
+	return speed <= INT_MAX || speed == (__u32)SPEED_UNKNOWN;
 }
 
 /* Duplex, half or full. */