ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier

Add a driver for the Cirrus Logic CS35L56 amplifier. This uses the same
component binding API as the CS35L41 driver. This is not a standalone
HDA device; it provides control of the CS35L56 for systems that use a
combination of an HDA codec and CS35L56 amplifiers with audio routed
through the HDA codec.

The CS35L56 combines a high-performance mono audio amplifier, Class-H
tracking inductive boost converter, Halo Core(TM) DSP and a DC-DC boost
converter supporting Class-H tracking.

Control interfaces are I2C or SPI through the standard Linux I2C or SPI
bus framework.

Most chip functionality is controlled by on-board ROM firmware that is
always running. Firmware patches can be applied by the driver in the form
of a .wmfw file (firmware patch) and/or a .bin file (system tuning).
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230721132120.5523-12-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/pci/hda/Kconfig

@@ -130,6 +130,37 @@ config SND_HDA_SCODEC_CS35L41_SPI
 comment "Set to Y if you want auto-loading the side codec driver"
 	depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_SPI=m
 
+config SND_HDA_SCODEC_CS35L56
+	tristate
+
+config SND_HDA_SCODEC_CS35L56_I2C
+	tristate "Build CS35L56 HD-audio side codec support for I2C Bus"
+	depends on I2C
+	depends on ACPI || COMPILE_TEST
+	depends on SND_SOC
+	select CS_DSP
+	select SND_HDA_GENERIC
+	select SND_SOC_CS35L56_SHARED
+	select SND_HDA_SCODEC_CS35L56
+	select SND_HDA_CS_DSP_CONTROLS
+	help
+	  Say Y or M here to include CS35L56 amplifier support with
+	  I2C control.
+
+config SND_HDA_SCODEC_CS35L56_SPI
+	tristate "Build CS35L56 HD-audio side codec support for SPI Bus"
+	depends on SPI_MASTER
+	depends on ACPI || COMPILE_TEST
+	depends on SND_SOC
+	select CS_DSP
+	select SND_HDA_GENERIC
+	select SND_SOC_CS35L56_SHARED
+	select SND_HDA_SCODEC_CS35L56
+	select SND_HDA_CS_DSP_CONTROLS
+	help
+	  Say Y or M here to include CS35L56 amplifier support with
+	  SPI control.
+
 config SND_HDA_CODEC_REALTEK
 	tristate "Build Realtek HD-audio codec support"
 	select SND_HDA_GENERIC

sound/pci/hda/Makefile

@@ -31,6 +31,9 @@ snd-hda-codec-hdmi-objs :=	patch_hdmi.o hda_eld.o
 snd-hda-scodec-cs35l41-objs :=		cs35l41_hda.o
 snd-hda-scodec-cs35l41-i2c-objs :=	cs35l41_hda_i2c.o
 snd-hda-scodec-cs35l41-spi-objs :=	cs35l41_hda_spi.o
+snd-hda-scodec-cs35l56-objs :=		cs35l56_hda.o
+snd-hda-scodec-cs35l56-i2c-objs :=	cs35l56_hda_i2c.o
+snd-hda-scodec-cs35l56-spi-objs :=	cs35l56_hda_spi.o
 snd-hda-cs-dsp-ctls-objs :=		hda_cs_dsp_ctl.o
 
 # common driver
@@ -55,6 +58,9 @@ obj-$(CONFIG_SND_HDA_CODEC_HDMI) += snd-hda-codec-hdmi.o
 obj-$(CONFIG_SND_HDA_SCODEC_CS35L41) += snd-hda-scodec-cs35l41.o
 obj-$(CONFIG_SND_HDA_SCODEC_CS35L41_I2C) += snd-hda-scodec-cs35l41-i2c.o
 obj-$(CONFIG_SND_HDA_SCODEC_CS35L41_SPI) += snd-hda-scodec-cs35l41-spi.o
+obj-$(CONFIG_SND_HDA_SCODEC_CS35L56) += snd-hda-scodec-cs35l56.o
+obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_I2C) += snd-hda-scodec-cs35l56-i2c.o
+obj-$(CONFIG_SND_HDA_SCODEC_CS35L56_SPI) += snd-hda-scodec-cs35l56-spi.o
 obj-$(CONFIG_SND_HDA_CS_DSP_CONTROLS) += snd-hda-cs-dsp-ctls.o
 
 # this must be the last entry after codec drivers;

sound/pci/hda/cs35l56_hda.h

+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * HDA audio driver for Cirrus Logic CS35L56 smart amp
+ *
+ * Copyright (C) 2023 Cirrus Logic, Inc. and
+ *                    Cirrus Logic International Semiconductor Ltd.
+ */
+
+#ifndef __CS35L56_HDA_H__
+#define __CS35L56_HDA_H__
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/firmware/cirrus/cs_dsp.h>
+#include <linux/firmware/cirrus/wmfw.h>
+#include <linux/regulator/consumer.h>
+#include <sound/cs35l56.h>
+
+struct dentry;
+
+struct cs35l56_hda {
+	struct cs35l56_base base;
+	struct hda_codec *codec;
+
+	int index;
+	const char *system_name;
+	const char *amp_name;
+
+	struct cs_dsp cs_dsp;
+	bool playing;
+	bool suspended;
+	u8 asp_tx_mask;
+
+	struct snd_kcontrol *posture_ctl;
+	struct snd_kcontrol *volume_ctl;
+	struct snd_kcontrol *mixer_ctl[4];
+
+#if IS_ENABLED(CONFIG_SND_DEBUG)
+	struct dentry *debugfs_root;
+#endif
+};
+
+extern const struct dev_pm_ops cs35l56_hda_pm_ops;
+
+int cs35l56_hda_common_probe(struct cs35l56_hda *cs35l56, int id);
+void cs35l56_hda_remove(struct device *dev);
+
+#endif /*__CS35L56_HDA_H__*/

sound/pci/hda/cs35l56_hda_i2c.c

+// SPDX-License-Identifier: GPL-2.0-only
+//
+// CS35L56 HDA audio driver I2C binding
+//
+// Copyright (C) 2023 Cirrus Logic, Inc. and
+//                    Cirrus Logic International Semiconductor Ltd.
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "cs35l56_hda.h"
+
+static int cs35l56_hda_i2c_probe(struct i2c_client *clt)
+{
+	struct cs35l56_hda *cs35l56;
+	int ret;
+
+	cs35l56 = devm_kzalloc(&clt->dev, sizeof(*cs35l56), GFP_KERNEL);
+	if (!cs35l56)
+		return -ENOMEM;
+
+	cs35l56->base.dev = &clt->dev;
+	cs35l56->base.can_hibernate = true;
+	cs35l56->base.regmap = devm_regmap_init_i2c(clt, &cs35l56_regmap_i2c);
+	if (IS_ERR(cs35l56->base.regmap)) {
+		ret = PTR_ERR(cs35l56->base.regmap);
+		dev_err(cs35l56->base.dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = cs35l56_hda_common_probe(cs35l56, clt->addr);
+	if (ret)
+		return ret;
+	ret = cs35l56_irq_request(&cs35l56->base, clt->irq);
+	if (ret < 0)
+		cs35l56_hda_remove(cs35l56->base.dev);
+
+	return ret;
+}
+
+static void cs35l56_hda_i2c_remove(struct i2c_client *clt)
+{
+	cs35l56_hda_remove(&clt->dev);
+}
+
+static const struct i2c_device_id cs35l56_hda_i2c_id[] = {
+	{ "cs35l56-hda", 0 },
+	{}
+};
+
+static struct i2c_driver cs35l56_hda_i2c_driver = {
+	.driver = {
+		.name		= "cs35l56-hda",
+		.pm		= &cs35l56_hda_pm_ops,
+	},
+	.id_table	= cs35l56_hda_i2c_id,
+	.probe		= cs35l56_hda_i2c_probe,
+	.remove		= cs35l56_hda_i2c_remove,
+};
+module_i2c_driver(cs35l56_hda_i2c_driver);
+
+MODULE_DESCRIPTION("HDA CS35L56 I2C driver");
+MODULE_IMPORT_NS(SND_HDA_SCODEC_CS35L56);
+MODULE_IMPORT_NS(SND_SOC_CS35L56_SHARED);
+MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
+MODULE_AUTHOR("Simon Trimmer <simont@opensource.cirrus.com>");
+MODULE_LICENSE("GPL");

sound/pci/hda/cs35l56_hda_spi.c

+// SPDX-License-Identifier: GPL-2.0-only
+//
+// CS35L56 HDA audio driver SPI binding
+//
+// Copyright (C) 2023 Cirrus Logic, Inc. and
+//                    Cirrus Logic International Semiconductor Ltd.
+
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "cs35l56_hda.h"
+
+static int cs35l56_hda_spi_probe(struct spi_device *spi)
+{
+	struct cs35l56_hda *cs35l56;
+	int ret;
+
+	cs35l56 = devm_kzalloc(&spi->dev, sizeof(*cs35l56), GFP_KERNEL);
+	if (!cs35l56)
+		return -ENOMEM;
+
+	cs35l56->base.dev = &spi->dev;
+	cs35l56->base.regmap = devm_regmap_init_spi(spi, &cs35l56_regmap_spi);
+	if (IS_ERR(cs35l56->base.regmap)) {
+		ret = PTR_ERR(cs35l56->base.regmap);
+		dev_err(cs35l56->base.dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = cs35l56_hda_common_probe(cs35l56, spi->chip_select);
+	if (ret)
+		return ret;
+	ret = cs35l56_irq_request(&cs35l56->base, spi->irq);
+	if (ret < 0)
+		cs35l56_hda_remove(cs35l56->base.dev);
+
+	return ret;
+}
+
+static void cs35l56_hda_spi_remove(struct spi_device *spi)
+{
+	cs35l56_hda_remove(&spi->dev);
+}
+
+static const struct spi_device_id cs35l56_hda_spi_id[] = {
+	{ "cs35l56-hda", 0 },
+	{}
+};
+
+static struct spi_driver cs35l56_hda_spi_driver = {
+	.driver = {
+		.name		= "cs35l56-hda",
+		.pm		= &cs35l56_hda_pm_ops,
+	},
+	.id_table	= cs35l56_hda_spi_id,
+	.probe		= cs35l56_hda_spi_probe,
+	.remove		= cs35l56_hda_spi_remove,
+};
+module_spi_driver(cs35l56_hda_spi_driver);
+
+MODULE_DESCRIPTION("HDA CS35L56 SPI driver");
+MODULE_IMPORT_NS(SND_HDA_SCODEC_CS35L56);
+MODULE_IMPORT_NS(SND_SOC_CS35L56_SHARED);
+MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
+MODULE_AUTHOR("Simon Trimmer <simont@opensource.cirrus.com>");
+MODULE_LICENSE("GPL");