selftests: mptcp: print test results with colors

To unify the output formats of all test scripts, this patch adds
four more helpers:

	mptcp_lib_pr_ok()
	mptcp_lib_pr_skip()
	mptcp_lib_pr_fail()
	mptcp_lib_pr_info()

to print out [ OK ], [SKIP], [FAIL] and 'INFO: ' with colors. Use them
in all scripts to print the "ok/skip/fail/info' using the same 'format'.

Having colors helps to quickly identify issues when looking at a long
list of output logs and results.

Note that now all print the same keywords, which was not the case
before, but it is good to uniform that.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-9-4f42c347b653@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tools/testing/selftests/net/mptcp/diag.sh

@@ -57,15 +57,15 @@ __chk_nr()
 	mptcp_lib_print_title "$msg"
 	if [ "$nr" != "$expected" ]; then
 		if [ "$nr" = "$skip" ] && ! mptcp_lib_expect_all_features; then
-			echo "[ skip ] Feature probably not supported"
+			mptcp_lib_pr_skip "Feature probably not supported"
 			mptcp_lib_result_skip "${msg}"
 		else
-			echo "[ fail ] expected $expected found $nr"
+			mptcp_lib_pr_fail "expected $expected found $nr"
 			mptcp_lib_result_fail "${msg}"
 			ret=${KSFT_FAIL}
 		fi
 	else
-		echo "[  ok  ]"
+		mptcp_lib_pr_ok
 		mptcp_lib_result_pass "${msg}"
 	fi
 }
@@ -114,15 +114,15 @@ wait_msk_nr()
 
 	mptcp_lib_print_title "$msg"
 	if [ $i -ge $timeout ]; then
-		echo "[ fail ] timeout while expecting $expected max $max last $nr"
+		mptcp_lib_pr_fail "timeout while expecting $expected max $max last $nr"
 		mptcp_lib_result_fail "${msg} # timeout"
 		ret=${KSFT_FAIL}
 	elif [ $nr != $expected ]; then
-		echo "[ fail ] expected $expected found $nr"
+		mptcp_lib_pr_fail "expected $expected found $nr"
 		mptcp_lib_result_fail "${msg} # unexpected result"
 		ret=${KSFT_FAIL}
 	else
-		echo "[  ok  ]"
+		mptcp_lib_pr_ok
 		mptcp_lib_result_pass "${msg}"
 	fi
 }

tools/testing/selftests/net/mptcp/mptcp_connect.sh

@@ -218,7 +218,7 @@ set_ethtool_flags() {
 	local flags="$3"
 
 	if ip netns exec $ns ethtool -K $dev $flags 2>/dev/null; then
-		echo "INFO: set $ns dev $dev: ethtool -K $flags"
+		mptcp_lib_pr_info "set $ns dev $dev: ethtool -K $flags"
 	fi
 }
 
@@ -261,7 +261,7 @@ check_mptcp_disabled()
 	print_larger_title "New MPTCP socket can be blocked via sysctl"
 	# net.mptcp.enabled should be enabled by default
 	if [ "$(ip netns exec ${disabled_ns} sysctl net.mptcp.enabled | awk '{ print $3 }')" -ne 1 ]; then
-		echo -e "net.mptcp.enabled sysctl is not 1 by default\t\t[ FAIL ]"
+		mptcp_lib_pr_fail "net.mptcp.enabled sysctl is not 1 by default"
 		mptcp_lib_result_fail "net.mptcp.enabled sysctl is not 1 by default"
 		ret=1
 		return 1
@@ -274,13 +274,13 @@ check_mptcp_disabled()
 	mptcp_lib_ns_exit "${disabled_ns}"
 
 	if [ ${err} -eq 0 ]; then
-		echo -e "New MPTCP socket cannot be blocked via sysctl\t\t[ FAIL ]"
+		mptcp_lib_pr_fail "New MPTCP socket cannot be blocked via sysctl"
 		mptcp_lib_result_fail "New MPTCP socket cannot be blocked via sysctl"
 		ret=1
 		return 1
 	fi
 
-	echo "[ OK ]"
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "New MPTCP socket can be blocked via sysctl"
 	return 0
 }
@@ -301,7 +301,7 @@ do_ping()
 	ip netns exec ${connector_ns} ping ${ping_args} $connect_addr >/dev/null || rc=1
 
 	if [ $rc -ne 0 ] ; then
-		echo "$listener_ns -> $connect_addr connectivity [ FAIL ]"
+		mptcp_lib_pr_fail "$listener_ns -> $connect_addr connectivity"
 		ret=1
 
 		return 1
@@ -335,7 +335,7 @@ do_transfer()
 	fi
 
 	if [ -n "$extra_args" ] && $options_log; then
-		echo "INFO: extra options: $extra_args"
+		mptcp_lib_pr_info "extra options: $extra_args"
 	fi
 	options_log=false
 
@@ -432,7 +432,7 @@ do_transfer()
 	result_msg+=" # time=${duration}ms"
 	printf "(duration %05sms) " "${duration}"
 	if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
-		echo "[ FAIL ] client exit code $retc, server $rets" 1>&2
+		mptcp_lib_pr_fail "client exit code $retc, server $rets"
 		echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
 		ip netns exec ${listener_ns} ss -Menita 1>&2 -o "sport = :$port"
 		cat /tmp/${listener_ns}.out
@@ -475,14 +475,14 @@ do_transfer()
 	fi
 
 	if [ ${stat_synrx_now_l} -lt ${expect_synrx} ]; then
-		printf "[ FAIL ] lower MPC SYN rx (%d) than expected (%d)\n" \
-			"${stat_synrx_now_l}" "${expect_synrx}"
+		mptcp_lib_pr_fail "lower MPC SYN rx (${stat_synrx_now_l})" \
+				  "than expected (${expect_synrx})"
 		retc=1
 	fi
 	if [ ${stat_ackrx_now_l} -lt ${expect_ackrx} ] && [ ${stat_ooo_now} -eq 0 ]; then
 		if [ ${stat_ooo_now} -eq 0 ]; then
-			printf "[ FAIL ] lower MPC ACK rx (%d) than expected (%d)\n" \
-				"${stat_ackrx_now_l}" "${expect_ackrx}"
+			mptcp_lib_pr_fail "lower MPC ACK rx (${stat_ackrx_now_l})" \
+					  "than expected (${expect_ackrx})"
 			rets=1
 		else
 			extra+=" [ Note ] fallback due to TCP OoO"
@@ -497,13 +497,13 @@ do_transfer()
 
 		local csum_err_s_nr=$((csum_err_s - stat_csum_err_s))
 		if [ $csum_err_s_nr -gt 0 ]; then
-			printf "[ FAIL ]\nserver got %d data checksum error[s]" ${csum_err_s_nr}
+			mptcp_lib_pr_fail "server got ${csum_err_s_nr} data checksum error[s]"
 			rets=1
 		fi
 
 		local csum_err_c_nr=$((csum_err_c - stat_csum_err_c))
 		if [ $csum_err_c_nr -gt 0 ]; then
-			printf "[ FAIL ]\nclient got %d data checksum error[s]" ${csum_err_c_nr}
+			mptcp_lib_pr_fail "client got ${csum_err_c_nr} data checksum error[s]"
 			retc=1
 		fi
 	fi
@@ -534,11 +534,11 @@ do_transfer()
 	fi
 
 	if [ $retc -eq 0 ] && [ $rets -eq 0 ]; then
-		printf "[ OK ]%s\n" "${extra:1}"
+		mptcp_lib_pr_ok "${extra:1}"
 		mptcp_lib_result_pass "${TEST_GROUP}: ${result_msg}"
 	else
 		if [ -n "${extra}" ]; then
-			printf "%s\n" "${extra:1}"
+			mptcp_lib_print_warn "${extra:1}"
 		fi
 		mptcp_lib_result_fail "${TEST_GROUP}: ${result_msg}"
 	fi
@@ -668,7 +668,7 @@ run_test_transparent()
 	# following function has been exported (T). Not great but better than
 	# checking for a specific kernel version.
 	if ! mptcp_lib_kallsyms_has "T __ip_sock_set_tos$"; then
-		echo "INFO: ${msg} not supported by the kernel: SKIP"
+		mptcp_lib_pr_skip "${msg} not supported by the kernel"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
@@ -685,7 +685,7 @@ table inet mangle {
 }
 EOF
 	then
-		echo "SKIP: $msg, could not load nft ruleset"
+		mptcp_lib_pr_skip "$msg, could not load nft ruleset"
 		mptcp_lib_fail_if_expected_feature "nft rules"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
@@ -701,7 +701,7 @@ EOF
 
 	if ! ip -net "$listener_ns" $r6flag rule add fwmark 1 lookup 100; then
 		ip netns exec "$listener_ns" nft flush ruleset
-		echo "SKIP: $msg, ip $r6flag rule failed"
+		mptcp_lib_pr_skip "$msg, ip $r6flag rule failed"
 		mptcp_lib_fail_if_expected_feature "ip rule"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
@@ -710,13 +710,13 @@ EOF
 	if ! ip -net "$listener_ns" route add local $local_addr/0 dev lo table 100; then
 		ip netns exec "$listener_ns" nft flush ruleset
 		ip -net "$listener_ns" $r6flag rule del fwmark 1 lookup 100
-		echo "SKIP: $msg, ip route add local $local_addr failed"
+		mptcp_lib_pr_skip "$msg, ip route add local $local_addr failed"
 		mptcp_lib_fail_if_expected_feature "ip route"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
 
-	echo "INFO: test $msg"
+	mptcp_lib_pr_info "test $msg"
 
 	port=$((20000 - 1))
 	local extra_args="-o TRANSPARENT"
@@ -729,12 +729,12 @@ EOF
 	ip -net "$listener_ns" route del local $local_addr/0 dev lo table 100
 
 	if [ $lret -ne 0 ]; then
-		echo "FAIL: $msg, mptcp connection error"
+		mptcp_lib_pr_fail "$msg, mptcp connection error"
 		ret=$lret
 		return 1
 	fi
 
-	echo "PASS: $msg"
+	mptcp_lib_pr_info "$msg pass"
 	return 0
 }
 
@@ -743,7 +743,7 @@ run_tests_peekmode()
 	local peekmode="$1"
 
 	TEST_GROUP="peek mode: ${peekmode}"
-	echo "INFO: with peek mode: ${peekmode}"
+	mptcp_lib_pr_info "with peek mode: ${peekmode}"
 	run_tests_lo "$ns1" "$ns1" 10.0.1.1 1 "-P ${peekmode}"
 	run_tests_lo "$ns1" "$ns1" dead:beef:1::1 1 "-P ${peekmode}"
 }
@@ -753,12 +753,12 @@ run_tests_mptfo()
 	TEST_GROUP="MPTFO"
 
 	if ! mptcp_lib_kallsyms_has "mptcp_fastopen_"; then
-		echo "INFO: TFO not supported by the kernel: SKIP"
+		mptcp_lib_pr_skip "TFO not supported by the kernel"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
 
-	echo "INFO: with MPTFO start"
+	mptcp_lib_pr_info "with MPTFO start"
 	ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=2
 	ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=1
 
@@ -770,7 +770,7 @@ run_tests_mptfo()
 
 	ip netns exec "$ns1" sysctl -q net.ipv4.tcp_fastopen=0
 	ip netns exec "$ns2" sysctl -q net.ipv4.tcp_fastopen=0
-	echo "INFO: with MPTFO end"
+	mptcp_lib_pr_info "with MPTFO end"
 }
 
 run_tests_disconnect()
@@ -781,7 +781,7 @@ run_tests_disconnect()
 	TEST_GROUP="full disconnect"
 
 	if ! mptcp_lib_kallsyms_has "mptcp_pm_data_reset$"; then
-		echo "INFO: Full disconnect not supported: SKIP"
+		mptcp_lib_pr_skip "Full disconnect not supported"
 		mptcp_lib_result_skip "${TEST_GROUP}"
 		return
 	fi
@@ -794,7 +794,7 @@ run_tests_disconnect()
 	cin_disconnect="$old_cin"
 	connect_per_transfer=3
 
-	echo "INFO: disconnect"
+	mptcp_lib_pr_info "disconnect"
 	run_tests_lo "$ns1" "$ns1" 10.0.1.1 1 "-I 3 -i $old_cin"
 	run_tests_lo "$ns1" "$ns1" dead:beef:1::1 1 "-I 3 -i $old_cin"
 
@@ -818,7 +818,7 @@ log_if_error()
 	local msg="$1"
 
 	if [ ${ret} -ne 0 ]; then
-		echo "FAIL: ${msg}"
+		mptcp_lib_pr_fail "${msg}"
 
 		final_ret=${ret}
 		ret=0
@@ -865,7 +865,7 @@ done
 mptcp_lib_result_code "${ret}" "ping tests"
 
 stop_if_error "Could not even run ping tests"
-echo "[ OK ]"
+mptcp_lib_pr_ok
 
 [ -n "$tc_loss" ] && tc -net "$ns2" qdisc add dev ns2eth3 root netem loss random $tc_loss delay ${tc_delay}ms
 tc_info="loss of $tc_loss "
@@ -890,7 +890,7 @@ elif [ "$reorder_delay" -gt 0 ];then
 	tc_info+="$tc_reorder with delay ${reorder_delay}ms "
 fi
 
-echo "INFO: Using ${tc_info}on ns3eth4"
+mptcp_lib_pr_info "Using ${tc_info}on ns3eth4"
 
 tc -net "$ns3" qdisc add dev ns3eth4 root netem delay ${reorder_delay}ms $tc_reorder
 

tools/testing/selftests/net/mptcp/mptcp_join.sh

@@ -185,17 +185,17 @@ print_info()
 
 print_ok()
 {
-	mptcp_lib_print_ok "[ ok ]${1:+ ${*}}"
+	mptcp_lib_pr_ok "${@}"
 }
 
 print_fail()
 {
-	mptcp_lib_print_err "[fail]${1:+ ${*}}"
+	mptcp_lib_pr_fail "${@}"
 }
 
 print_skip()
 {
-	mptcp_lib_print_warn "[skip]${1:+ ${*}}"
+	mptcp_lib_pr_skip "${@}"
 }
 
 # [ $1: fail msg ]

tools/testing/selftests/net/mptcp/mptcp_lib.sh

@@ -50,6 +50,23 @@ mptcp_lib_print_err() {
 	mptcp_lib_print_color "${MPTCP_LIB_COLOR_RED}${*}"
 }
 
+# shellcheck disable=SC2120 # parameters are optional
+mptcp_lib_pr_ok() {
+	mptcp_lib_print_ok "[ OK ]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_skip() {
+	mptcp_lib_print_warn "[SKIP]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_fail() {
+	mptcp_lib_print_err "[FAIL]${1:+ ${*}}"
+}
+
+mptcp_lib_pr_info() {
+	mptcp_lib_print_info "INFO: ${*}"
+}
+
 # SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var can be set when validating all
 # features using the last version of the kernel and the selftests to make sure
 # a test is not being skipped by mistake.
@@ -80,14 +97,14 @@ mptcp_lib_has_file() {
 
 mptcp_lib_check_mptcp() {
 	if ! mptcp_lib_has_file "/proc/sys/net/mptcp/enabled"; then
-		echo "SKIP: MPTCP support is not available"
+		mptcp_lib_pr_skip "MPTCP support is not available"
 		exit ${KSFT_SKIP}
 	fi
 }
 
 mptcp_lib_check_kallsyms() {
 	if ! mptcp_lib_has_file "/proc/kallsyms"; then
-		echo "SKIP: CONFIG_KALLSYMS is missing"
+		mptcp_lib_pr_skip "CONFIG_KALLSYMS is missing"
 		exit ${KSFT_SKIP}
 	fi
 }
@@ -294,7 +311,7 @@ mptcp_lib_check_transfer() {
 	local what="${3}"
 
 	if ! cmp "$in" "$out" > /dev/null 2>&1; then
-		echo "[ FAIL ] $what does not match (in, out):"
+		mptcp_lib_pr_fail "$what does not match (in, out):"
 		mptcp_lib_print_file_err "$in"
 		mptcp_lib_print_file_err "$out"
 
@@ -334,13 +351,13 @@ mptcp_lib_check_output() {
 	fi
 
 	if [ ${cmd_ret} -ne 0 ]; then
-		mptcp_lib_print_err "[FAIL] command execution '${cmd}' stderr"
+		mptcp_lib_pr_fail "command execution '${cmd}' stderr"
 		cat "${err}"
 		return 2
 	elif [ "${out}" = "${expected}" ]; then
 		return 0
 	else
-		mptcp_lib_print_err "[FAIL] expected '${expected}' got '${out}'"
+		mptcp_lib_pr_fail "expected '${expected}' got '${out}'"
 		return 1
 	fi
 }
@@ -352,29 +369,30 @@ mptcp_lib_check_tools() {
 		case "${tool}" in
 		"ip")
 			if ! ip -Version &> /dev/null; then
-				mptcp_lib_print_warn "SKIP: Could not run test without ip tool"
+				mptcp_lib_pr_skip "Could not run test without ip tool"
 				exit ${KSFT_SKIP}
 			fi
 			;;
 		"ss")
 			if ! ss -h | grep -q MPTCP; then
-				mptcp_lib_print_warn "SKIP: ss tool does not support MPTCP"
+				mptcp_lib_pr_skip "ss tool does not support MPTCP"
 				exit ${KSFT_SKIP}
 			fi
 			;;
 		"iptables"* | "ip6tables"*)
 			if ! "${tool}" -V &> /dev/null; then
-				mptcp_lib_print_warn "SKIP: Could not run all tests without ${tool}"
+				mptcp_lib_pr_skip "Could not run all tests without ${tool}"
 				exit ${KSFT_SKIP}
 			fi
 			;;
 		*)
-			mptcp_lib_print_err "Internal error: unsupported tool: ${tool}"
+			mptcp_lib_pr_fail "Internal error: unsupported tool: ${tool}"
 			exit ${KSFT_FAIL}
 			;;
 		esac
 	done
 }
+
 mptcp_lib_ns_init() {
 	local sec rndh
 

tools/testing/selftests/net/mptcp/mptcp_sockopt.sh

@@ -103,7 +103,7 @@ check_mark()
 	local v
 	for v in $values; do
 		if [ $v -ne 0 ]; then
-			echo "FAIL: got $tables $values in ns $ns," \
+			mptcp_lib_pr_fail "got $tables $values in ns $ns," \
 					  "not 0 - not all expected packets marked"
 			ret=1
 			return 1
@@ -169,7 +169,7 @@ do_transfer()
 
 	print_title "Transfer ${ip:2}"
 	if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ]; then
-		echo "[FAIL] client exit code $retc, server $rets"
+		mptcp_lib_pr_fail "client exit code $retc, server $rets"
 		echo -e "\nnetns ${listener_ns} socket stat for ${port}:" 1>&2
 		ip netns exec ${listener_ns} ss -Menita 1>&2 -o "sport = :$port"
 
@@ -184,7 +184,7 @@ do_transfer()
 	if ! mptcp_lib_check_transfer $cin $sout "file received by server"; then
 		rets=1
 	else
-		echo "[ OK ]"
+		mptcp_lib_pr_ok
 	fi
 	mptcp_lib_result_code "${rets}" "transfer ${ip}"
 
@@ -200,10 +200,10 @@ do_transfer()
 	mptcp_lib_result_code "${retc}" "mark ${ip}"
 
 	if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
-		echo "[ OK ]"
+		mptcp_lib_pr_ok
 		return 0
 	fi
-	echo "[FAIL]"
+	mptcp_lib_pr_fail
 
 	return 1
 }
@@ -224,7 +224,7 @@ do_mptcp_sockopt_tests()
 	local lret=0
 
 	if ! mptcp_lib_kallsyms_has "mptcp_diag_fill_info$"; then
-		echo "INFO: MPTCP sockopt not supported: SKIP"
+		mptcp_lib_pr_skip "MPTCP sockopt not supported"
 		mptcp_lib_result_skip "sockopt"
 		return
 	fi
@@ -234,12 +234,12 @@ do_mptcp_sockopt_tests()
 
 	print_title "SOL_MPTCP sockopt v4"
 	if [ $lret -ne 0 ]; then
-		echo "[FAIL]"
+		mptcp_lib_pr_fail
 		mptcp_lib_result_fail "sockopt v4"
 		ret=$lret
 		return
 	fi
-	echo "[ OK ]"
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "sockopt v4"
 
 	ip netns exec "$ns_sbox" ./mptcp_sockopt -6
@@ -247,12 +247,12 @@ do_mptcp_sockopt_tests()
 
 	print_title "SOL_MPTCP sockopt v6"
 	if [ $lret -ne 0 ]; then
-		echo "[FAIL]"
+		mptcp_lib_pr_fail
 		mptcp_lib_result_fail "sockopt v6"
 		ret=$lret
 		return
 	fi
-	echo "[ OK ]"
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "sockopt v6"
 }
 
@@ -280,12 +280,12 @@ do_tcpinq_test()
 	local lret=$?
 	if [ $lret -ne 0 ];then
 		ret=$lret
-		echo "[FAIL]"
+		mptcp_lib_pr_fail
 		mptcp_lib_result_fail "TCP_INQ: $*"
 		return $lret
 	fi
 
-	echo "[ OK ]"
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "TCP_INQ: $*"
 	return $lret
 }
@@ -295,7 +295,7 @@ do_tcpinq_tests()
 	local lret=0
 
 	if ! mptcp_lib_kallsyms_has "mptcp_ioctl$"; then
-		echo "INFO: TCP_INQ not supported: SKIP"
+		mptcp_lib_pr_skip "TCP_INQ not supported"
 		mptcp_lib_result_skip "TCP_INQ"
 		return
 	fi

tools/testing/selftests/net/mptcp/pm_netlink.sh

@@ -190,7 +190,7 @@ else
 	for st in fullmesh nofullmesh backup,fullmesh; do
 		st="          (${st})"
 		mptcp_lib_print_title "${st}"
-		echo "[SKIP]"
+		mptcp_lib_pr_skip
 		mptcp_lib_result_skip "${st}"
 	done
 fi

tools/testing/selftests/net/mptcp/simult_flows.sh

@@ -187,12 +187,12 @@ do_transfer()
 	printf "%-16s" " max $max_time "
 	if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \
 	   [ $cmpc -eq 0 ] && [ $cmps -eq 0 ]; then
-		echo "[ OK ]"
+		mptcp_lib_pr_ok
 		cat "$capout"
 		return 0
 	fi
 
-	echo " [ fail ]"
+	mptcp_lib_pr_fail
 	echo "client exit code $retc, server $rets" 1>&2
 	echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2
 	ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port"

tools/testing/selftests/net/mptcp/userspace_pm.sh

@@ -57,13 +57,9 @@ test_name=""
 # a bit more space: because we have more to display
 MPTCP_LIB_TEST_FORMAT="%02u %-68s"
 
-_printf() {
-	stdbuf -o0 -e0 printf "${@}"
-}
-
 print_title()
 {
-	_printf "INFO: %s\n" "${1}"
+	mptcp_lib_pr_info "${1}"
 }
 
 # $1: test name
@@ -74,33 +70,23 @@ print_test()
 	mptcp_lib_print_title "${test_name}"
 }
 
-print_results()
-{
-	_printf "[%s]\n" "${1}"
-}
-
 test_pass()
 {
-	print_results " OK "
+	mptcp_lib_pr_ok
 	mptcp_lib_result_pass "${test_name}"
 }
 
 test_skip()
 {
-	print_results "SKIP"
+	mptcp_lib_pr_skip
 	mptcp_lib_result_skip "${test_name}"
 }
 
 # $1: msg
 test_fail()
 {
-	print_results "FAIL"
+	mptcp_lib_pr_fail "${@}"
 	ret=1
-
-	if [ -n "${1}" ]; then
-		_printf "\t%s\n" "${1}"
-	fi
-
 	mptcp_lib_result_fail "${test_name}"
 }
 
@@ -122,7 +108,7 @@ cleanup()
 
 	rm -rf $file $client_evts $server_evts
 
-	_printf "Done\n"
+	mptcp_lib_pr_info "Done"
 }
 
 trap cleanup EXIT
@@ -256,8 +242,7 @@ check_expected_one()
 		test_fail
 	fi
 
-	_printf "\tExpected value for '%s': '%s', got '%s'.\n" \
-		"${var}" "${!exp}" "${!var}"
+	mptcp_lib_print_err "\tExpected value for '${var}': '${!exp}', got '${!var}'."
 	return 1
 }