arm64: dts: imx8mq: correct usb controller clocks

The correct clock for "bus_early", "ref", "suspend" should be:
IMX8MQ_CLK_USB1_CTRL_ROOT, IMX8MQ_CLK_USB_CORE_REF, IMX8MQ_CLK_32K,
especially we may need the right suspend clock rate to set register
in controller driver.
Signed-off-by: Li Jun <jun.li@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -919,9 +919,9 @@ gpu: gpu@38000000 {
 		usb_dwc3_0: usb@38100000 {
 			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
 			reg = <0x38100000 0x10000>;
-			clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
 			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
-			         <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>;
+				 <&clk IMX8MQ_CLK_32K>;
 			clock-names = "bus_early", "ref", "suspend";
 			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
 			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
@@ -951,9 +951,9 @@ usb3_phy0: usb-phy@381f0040 {
 		usb_dwc3_1: usb@38200000 {
 			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
 			reg = <0x38200000 0x10000>;
-			clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
 			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
-			         <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>;
+				 <&clk IMX8MQ_CLK_32K>;
 			clock-names = "bus_early", "ref", "suspend";
 			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
 			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;