Commit 74fb838c authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem fixes from Dmitry Torokhov:
 "Just a few driver fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc40 - remove wrong announcement of pressure support
  Input: lpc32xx-keys - select INPUT_MATRIXKMAP
  Input: pxa27x_keypad - clear pending interrupts on keypad config
  Input: wacom - correct bad Cintiq 24HD check
  Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD
  Input: egalax_ts - get gpio from devicetree
parents 23e44302 32ed1911
* EETI eGalax Multiple Touch Controller
Required properties:
- compatible: must be "eeti,egalax_ts"
- reg: i2c slave address
- interrupt-parent: the phandle for the interrupt controller
- interrupts: touch controller interrupt
- wakeup-gpios: the gpio pin to be used for waking up the controller
as well as uased as irq pin
Example:
egalax_ts@04 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
interrupt-parent = <&gpio1>;
interrupts = <9 2>;
wakeup-gpios = <&gpio1 9 0>;
};
...@@ -335,6 +335,7 @@ config KEYBOARD_LOCOMO ...@@ -335,6 +335,7 @@ config KEYBOARD_LOCOMO
config KEYBOARD_LPC32XX config KEYBOARD_LPC32XX
tristate "LPC32XX matrix key scanner support" tristate "LPC32XX matrix key scanner support"
depends on ARCH_LPC32XX && OF depends on ARCH_LPC32XX && OF
select INPUT_MATRIXKMAP
help help
Say Y here if you want to use NXP LPC32XX SoC key scanner interface, Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
connected to a key matrix. connected to a key matrix.
......
...@@ -368,6 +368,9 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad) ...@@ -368,6 +368,9 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
unsigned int mask = 0, direct_key_num = 0; unsigned int mask = 0, direct_key_num = 0;
unsigned long kpc = 0; unsigned long kpc = 0;
/* clear pending interrupt bit */
keypad_readl(KPC);
/* enable matrix keys with automatic scan */ /* enable matrix keys with automatic scan */
if (pdata->matrix_key_rows && pdata->matrix_key_cols) { if (pdata->matrix_key_rows && pdata->matrix_key_cols) {
kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL; kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL;
......
...@@ -391,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf, ...@@ -391,7 +391,7 @@ static int wacom_parse_hid(struct usb_interface *intf,
features->pktlen = WACOM_PKGLEN_TPC2FG; features->pktlen = WACOM_PKGLEN_TPC2FG;
} }
if (features->type == MTSCREEN || WACOM_24HDT) if (features->type == MTSCREEN || features->type == WACOM_24HDT)
features->pktlen = WACOM_PKGLEN_MTOUCH; features->pktlen = WACOM_PKGLEN_MTOUCH;
if (features->type == BAMBOO_PT) { if (features->type == BAMBOO_PT) {
......
...@@ -1518,6 +1518,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, ...@@ -1518,6 +1518,9 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev,
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
wacom_setup_cintiq(wacom_wac); wacom_setup_cintiq(wacom_wac);
break; break;
......
...@@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI ...@@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI
config TOUCHSCREEN_EGALAX config TOUCHSCREEN_EGALAX
tristate "EETI eGalax multi-touch panel support" tristate "EETI eGalax multi-touch panel support"
depends on I2C depends on I2C && OF
help help
Say Y here to enable support for I2C connected EETI Say Y here to enable support for I2C connected EETI
eGalax multi-touch panels. eGalax multi-touch panels.
......
...@@ -28,6 +28,7 @@ ...@@ -28,6 +28,7 @@
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/bitops.h> #include <linux/bitops.h>
#include <linux/input/mt.h> #include <linux/input/mt.h>
#include <linux/of_gpio.h>
/* /*
* Mouse Mode: some panel may configure the controller to mouse mode, * Mouse Mode: some panel may configure the controller to mouse mode,
...@@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) ...@@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
/* wake up controller by an falling edge of interrupt gpio. */ /* wake up controller by an falling edge of interrupt gpio. */
static int egalax_wake_up_device(struct i2c_client *client) static int egalax_wake_up_device(struct i2c_client *client)
{ {
int gpio = irq_to_gpio(client->irq); struct device_node *np = client->dev.of_node;
int gpio;
int ret; int ret;
if (!np)
return -ENODEV;
gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
if (!gpio_is_valid(gpio))
return -ENODEV;
ret = gpio_request(gpio, "egalax_irq"); ret = gpio_request(gpio, "egalax_irq");
if (ret < 0) { if (ret < 0) {
dev_err(&client->dev, dev_err(&client->dev,
...@@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ...@@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client,
ts->input_dev = input_dev; ts->input_dev = input_dev;
/* controller may be in sleep, wake it up. */ /* controller may be in sleep, wake it up. */
egalax_wake_up_device(client); error = egalax_wake_up_device(client);
if (error) {
dev_err(&client->dev, "Failed to wake up the controller\n");
goto err_free_dev;
}
ret = egalax_firmware_version(client); ret = egalax_firmware_version(client);
if (ret < 0) { if (ret < 0) {
...@@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev) ...@@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
static struct of_device_id egalax_ts_dt_ids[] = {
{ .compatible = "eeti,egalax_ts" },
{ /* sentinel */ }
};
static struct i2c_driver egalax_ts_driver = { static struct i2c_driver egalax_ts_driver = {
.driver = { .driver = {
.name = "egalax_ts", .name = "egalax_ts",
.owner = THIS_MODULE, .owner = THIS_MODULE,
.pm = &egalax_ts_pm_ops, .pm = &egalax_ts_pm_ops,
.of_match_table = of_match_ptr(egalax_ts_dt_ids),
}, },
.id_table = egalax_ts_id, .id_table = egalax_ts_id,
.probe = egalax_ts_probe, .probe = egalax_ts_probe,
......
...@@ -107,7 +107,6 @@ static int tsc_connect(struct serio *serio, struct serio_driver *drv) ...@@ -107,7 +107,6 @@ static int tsc_connect(struct serio *serio, struct serio_driver *drv)
__set_bit(BTN_TOUCH, input_dev->keybit); __set_bit(BTN_TOUCH, input_dev->keybit);
input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0);
input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0);
input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0);
serio_set_drvdata(serio, ptsc); serio_set_drvdata(serio, ptsc);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment