ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

arch/arm/mach-ixp4xx/avila-setup.c

@@ -169,6 +169,9 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= avila_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 
  /*
@@ -184,6 +187,9 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= avila_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 

arch/arm/mach-ixp4xx/coyote-setup.c

@@ -114,6 +114,9 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= coyote_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 

arch/arm/mach-ixp4xx/dsmg600-setup.c

@@ -284,4 +284,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &dsmg600_timer,
 	.init_machine	= dsmg600_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END

arch/arm/mach-ixp4xx/fsg-setup.c

@@ -275,5 +275,8 @@ MACHINE_START(FSG, "Freecom FSG-3")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= fsg_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 

arch/arm/mach-ixp4xx/gateway7001-setup.c

@@ -101,5 +101,8 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= gateway7001_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif

arch/arm/mach-ixp4xx/goramo_mlr.c

@@ -501,4 +501,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= gmlr_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END

arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -169,6 +169,9 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= gtwx5715_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 
 

arch/arm/mach-ixp4xx/include/mach/memory.h

@@ -14,8 +14,4 @@
  */
 #define PLAT_PHYS_OFFSET	UL(0x00000000)
 
-#ifdef CONFIG_PCI
-#define ARM_DMA_ZONE_SIZE	SZ_64M
-#endif
-
 #endif

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -258,6 +258,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
@@ -269,6 +272,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
@@ -280,6 +286,9 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
@@ -291,5 +300,8 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif

arch/arm/mach-ixp4xx/nas100d-setup.c

@@ -319,4 +319,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
 	.init_machine	= nas100d_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END

arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -305,4 +305,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &nslu2_timer,
 	.init_machine	= nslu2_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END

arch/arm/mach-ixp4xx/vulcan-setup.c

@@ -241,4 +241,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= vulcan_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END

arch/arm/mach-ixp4xx/wg302v2-setup.c

@@ -102,5 +102,8 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= wg302v2_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif