Commit 75ea6358 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux

* 'for-linus/2639/i2c-2' of git://git.fluff.org/bjdooks/linux:
  i2c-pxa2xx: Don't clear isr bits too early
  i2c-pxa2xx: Fix register offsets
  i2c-pxa2xx: pass of_node from platform driver to adapter and publish
  i2c-pxa2xx: check timeout correctly
  i2c-pxa2xx: add support for shared IRQ handler
  i2c-pxa2xx: Add PCI support for PXA I2C controller
  ARM: pxa2xx: reorganize I2C files
  i2c-pxa2xx: use dynamic register layout
  i2c-mxs: set controller to pio queue mode after reset
  i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH
  i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter
parents 14577beb 97491ba3
Kernel driver i2c-diolan-u2c
Supported adapters:
* Diolan U2C-12 I2C-USB adapter
Documentation:
http://www.diolan.com/i2c/u2c12.html
Author: Guenter Roeck <guenter.roeck@ericsson.com>
Description
-----------
This is the driver for the Diolan U2C-12 USB-I2C adapter.
The Diolan U2C-12 I2C-USB Adapter provides a low cost solution to connect
a computer to I2C slave devices using a USB interface. It also supports
connectivity to SPI devices.
This driver only supports the I2C interface of U2C-12. The driver does not use
interrupts.
Module parameters
-----------------
* frequency: I2C bus frequency
......@@ -2138,6 +2138,12 @@ F: Documentation/serial/digiepca.txt
F: drivers/char/epca*
F: drivers/char/digi*
DIOLAN U2C-12 I2C DRIVER
M: Guenter Roeck <guenter.roeck@ericsson.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/busses/i2c-diolan-u2c.c
DIRECTORY NOTIFICATION (DNOTIFY)
M: Eric Paris <eparis@parisplace.org>
S: Maintained
......
......@@ -11,8 +11,8 @@ extern void __init mmp2_init_irq(void);
extern void mmp2_clear_pmic_int(void);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
extern struct pxa_device_desc mmp2_device_uart1;
extern struct pxa_device_desc mmp2_device_uart2;
......
......@@ -8,8 +8,8 @@ extern void __init pxa168_init_irq(void);
extern void pxa168_clear_keypad_wakeup(void);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
#include <video/pxa168fb.h>
#include <plat/pxa27x_keypad.h>
......
......@@ -7,8 +7,8 @@ extern struct sys_timer pxa910_timer;
extern void __init pxa910_init_irq(void);
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
extern struct pxa_device_desc pxa910_device_uart1;
......
......@@ -27,6 +27,7 @@
#include <linux/mtd/partitions.h>
#include <linux/types.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/max1586.h>
......@@ -51,8 +52,6 @@
#include <mach/irda.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -29,6 +29,7 @@
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/da903x.h>
#include <linux/regulator/machine.h>
......@@ -48,7 +49,6 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
#include <mach/audio.h>
#include <mach/pxa3xx-u2d.h>
......
......@@ -20,6 +20,7 @@
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/pxa27x.h>
#include <mach/colibri.h>
......@@ -27,8 +28,6 @@
#include <mach/ohci.h>
#include <mach/pxa27x-udc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -21,6 +21,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/sysdev.h>
#include <asm/irq.h>
......@@ -33,8 +34,6 @@
#include <mach/pxa27x-udc.h>
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include "devices.h"
#include "generic.h"
......
......@@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
......@@ -45,7 +46,6 @@
#include <asm/mach/irq.h>
#include <mach/pxa25x.h>
#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
......
......@@ -17,12 +17,12 @@
#include <linux/mtd/partitions.h>
#include <linux/sm501.h>
#include <linux/smsc911x.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/csb726.h>
#include <mach/mfp-pxa27x.h>
#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
......
......@@ -4,6 +4,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/pmu.h>
#include <mach/udc.h>
......@@ -16,7 +17,6 @@
#include <mach/camera.h>
#include <mach/audio.h>
#include <mach/hardware.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
#include "devices.h"
......
......@@ -31,6 +31,7 @@
#include <linux/apm-emulation.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/regulator/userspace-consumer.h>
#include <media/soc_camera.h>
......@@ -45,7 +46,6 @@
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <plat/pxa27x_keypad.h>
#include <plat/i2c.h>
#include <mach/camera.h>
#include "generic.h"
......
......@@ -20,6 +20,7 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds-lp3944.h>
#include <linux/i2c/pxa-i2c.h>
#include <media/soc_camera.h>
......@@ -30,7 +31,6 @@
#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <plat/pxa27x_keypad.h>
#include <mach/camera.h>
......
......@@ -35,6 +35,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -42,7 +43,6 @@
#include <mach/pxa27x.h>
#include <mach/hx4700.h>
#include <plat/i2c.h>
#include <mach/irda.h>
#include <video/platform_lcd.h>
......
......@@ -28,6 +28,7 @@
#include <linux/leds.h>
#include <linux/mfd/da903x.h>
#include <linux/i2c/max732x.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -45,7 +46,6 @@
#include <mach/mmc.h>
#include <plat/pxa27x_keypad.h>
#include <mach/littleton.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
#include "generic.h"
......
......@@ -28,6 +28,7 @@
#include <linux/regulator/bq24022.h>
#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/i2c/pxa-i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -36,7 +37,6 @@
#include <mach/pxa27x.h>
#include <mach/magician.h>
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
......
......@@ -27,6 +27,7 @@
#include <linux/gpio_keys.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -46,7 +47,6 @@
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
......
......@@ -39,6 +39,7 @@
#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
#include <linux/slab.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -50,7 +51,6 @@
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <media/soc_camera.h>
......
......@@ -22,8 +22,8 @@
#include <linux/serial_8250.h>
#include <linux/dm9000.h>
#include <linux/gpio.h>
#include <linux/i2c/pxa-i2c.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
#include <mach/pxafb.h>
......
......@@ -22,6 +22,7 @@
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -36,8 +37,6 @@
#include <mach/palmasoc.h>
#include <mach/palm27x.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -23,12 +23,12 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/pwm_backlight.h>
#include <media/soc_camera.h>
#include <asm/gpio.h>
#include <plat/i2c.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
......
......@@ -23,6 +23,7 @@
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/pxa2xx_spi.h>
......@@ -44,7 +45,6 @@
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
......
......@@ -19,6 +19,7 @@
#include <linux/sysdev.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
......@@ -32,8 +33,6 @@
#include <mach/dma.h>
#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
......
......@@ -21,6 +21,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
......@@ -32,7 +33,6 @@
#include <mach/dma.h>
#include <mach/regs-intc.h>
#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sysdev.h>
......@@ -27,7 +28,6 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/regs-intc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -32,6 +32,7 @@
#include <linux/sched.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/lis3lv02d.h>
......@@ -53,7 +54,6 @@
#include <mach/ohci.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
#include "generic.h"
......
......@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/smc91x.h>
#include <linux/mfd/da903x.h>
#include <linux/mtd/mtd.h>
......@@ -31,7 +32,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa930.h>
#include <plat/i2c.h>
#include <mach/pxafb.h>
#include "devices.h"
......
......@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
#include <asm/mach-types.h>
......@@ -24,8 +25,6 @@
#include <mach/mfp-pxa930.h>
#include <mach/gpio.h>
#include <plat/i2c.h>
#include "generic.h"
#define SAARB_NR_IRQS (IRQ_BOARD_START + 40)
......
......@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
......@@ -47,8 +48,6 @@
#include <mach/sharpsl_pm.h>
#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -25,6 +25,7 @@
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/partitions.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/smc91x.h>
......@@ -43,7 +44,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
......
......@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/gpio.h>
#include <linux/mfd/88pm860x.h>
......@@ -23,8 +24,6 @@
#include <mach/pxa930.h>
#include <plat/i2c.h>
#include "devices.h"
#include "generic.h"
......
......@@ -34,6 +34,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
......@@ -41,7 +42,6 @@
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
......
......@@ -26,6 +26,7 @@
#include <linux/dm9000.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/types.h>
#include <asm/setup.h>
......@@ -47,7 +48,6 @@
#include <mach/irda.h>
#include <mach/ohci.h>
#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -36,6 +36,7 @@
#include <linux/gpio.h>
#include <linux/jiffies.h>
#include <linux/i2c-gpio.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
#include <linux/pwm_backlight.h>
......@@ -47,7 +48,6 @@
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <plat/i2c.h>
#include <mach/regs-uart.h>
#include <mach/arcom-pcmcia.h>
#include <mach/viper.h>
......
......@@ -26,6 +26,7 @@
#include <linux/ucb1400.h>
#include <linux/ata_platform.h>
#include <linux/regulator/max1586.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -40,8 +41,6 @@
#include <mach/udc.h>
#include <mach/pata_pxa.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
......@@ -26,8 +27,6 @@
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
......
......@@ -29,6 +29,7 @@
#include <linux/gpio_keys.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -40,8 +41,6 @@
#include <mach/mmc.h>
#include <plat/pxa27x_keypad.h>
#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
......
......@@ -25,6 +25,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/apm-emulation.h>
#include <linux/can/platform/mcp251x.h>
......@@ -33,8 +34,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/i2c.h>
#include <mach/pxa2xx-regs.h>
#include <mach/regs-uart.h>
#include <mach/ohci.h>
......
......@@ -17,11 +17,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/gpio.h>
#include <mach/pxa300.h>
#include <plat/i2c.h>
#include <mach/zylonite.h>
#include "generic.h"
......
......@@ -547,15 +547,18 @@ config I2C_PUV3
config I2C_PXA
tristate "Intel PXA2XX I2C adapter"
depends on ARCH_PXA || ARCH_MMP
depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF)
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
will be called i2c-pxa.
config I2C_PXA_PCI
def_bool I2C_PXA && X86_32 && PCI && OF
config I2C_PXA_SLAVE
bool "Intel PXA2XX I2C Slave comms support"
depends on I2C_PXA
depends on I2C_PXA && !X86_32
help
Support I2C slave mode communications on the PXA I2C bus. This
is necessary for systems where the PXA may be a target on the
......@@ -668,15 +671,28 @@ config I2C_XILINX
will be called xilinx_i2c.
config I2C_EG20T
tristate "PCH I2C of Intel EG20T"
depends on PCI
help
This driver is for PCH(Platform controller Hub) I2C of EG20T which
is an IOH(Input/Output Hub) for x86 embedded processor.
This driver can access PCH I2C bus device.
tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH"
depends on PCI
help
This driver is for PCH(Platform controller Hub) I2C of EG20T which
is an IOH(Input/Output Hub) for x86 embedded processor.
This driver can access PCH I2C bus device.
This driver also supports the ML7213, a companion chip for the
Atom E6xx series and compatible with the Intel EG20T PCH.
comment "External I2C/SMBus adapter drivers"
config I2C_DIOLAN_U2C
tristate "Diolan U2C-12 USB adapter"
depends on USB
help
If you say yes to this option, support will be included for Diolan
U2C-12, a USB to I2C interface.
This driver can also be built as a module. If so, the module
will be called i2c-diolan-u2c.
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
......
......@@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
......@@ -67,6 +68,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
......
This diff is collapsed.
......@@ -132,6 +132,13 @@
#define pch_pci_dbg(pdev, fmt, arg...) \
dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
/*
Set the number of I2C instance max
Intel EG20T PCH : 1ch
OKI SEMICONDUCTOR ML7213 IOH : 2ch
*/
#define PCH_I2C_MAX_DEV 2
/**
* struct i2c_algo_pch_data - for I2C driver functionalities
* @pch_adapter: stores the reference to i2c_adapter structure
......@@ -156,12 +163,14 @@ struct i2c_algo_pch_data {
* @pch_data: stores a list of i2c_algo_pch_data
* @pch_i2c_suspended: specifies whether the system is suspended or not
* perhaps with more lines and words.
* @ch_num: specifies the number of i2c instance
*
* pch_data has as many elements as maximum I2C channels
*/
struct adapter_info {
struct i2c_algo_pch_data pch_data;
struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV];
bool pch_i2c_suspended;
int ch_num;
};
......@@ -170,8 +179,13 @@ static int pch_clk = 50000; /* specifies I2C clock speed in KHz */
static wait_queue_head_t pch_event;
static DEFINE_MUTEX(pch_mutex);
/* Definition for ML7213 by OKI SEMICONDUCTOR */
#define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_I2C 0x802D
static struct pci_device_id __devinitdata pch_pcidev_id[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_I2C)},
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
{0,}
};
......@@ -212,8 +226,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap)
/* Initialize I2C registers */
iowrite32(0x21, p + PCH_I2CNF);
pch_setbit(adap->pch_base_address, PCH_I2CCTL,
PCH_I2CCTL_I2CMEN);
pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN);
if (pch_i2c_speed != 400)
pch_i2c_speed = 100;
......@@ -255,7 +268,7 @@ static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
* @timeout: waiting time counter (us).
*/
static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
s32 timeout)
s32 timeout)
{
void __iomem *p = adap->pch_base_address;
......@@ -475,8 +488,8 @@ static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap)
* @last: specifies whether last message or not.
* @first: specifies whether first message or not.
*/
s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
u32 last, u32 first)
static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
u32 last, u32 first)
{
struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
......@@ -569,10 +582,10 @@ s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
}
/**
* pch_i2c_cb_ch0() - Interrupt handler Call back function
* pch_i2c_cb() - Interrupt handler Call back function
* @adap: Pointer to struct i2c_algo_pch_data.
*/
static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap)
static void pch_i2c_cb(struct i2c_algo_pch_data *adap)
{
u32 sts;
void __iomem *p = adap->pch_base_address;
......@@ -600,24 +613,30 @@ static void pch_i2c_cb_ch0(struct i2c_algo_pch_data *adap)
*/
static irqreturn_t pch_i2c_handler(int irq, void *pData)
{
s32 reg_val;
struct i2c_algo_pch_data *adap_data = (struct i2c_algo_pch_data *)pData;
void __iomem *p = adap_data->pch_base_address;
u32 mode = ioread32(p + PCH_I2CMOD) & (BUFFER_MODE | EEPROM_SR_MODE);
if (mode != NORMAL_MODE) {
pch_err(adap_data, "I2C mode is not supported\n");
return IRQ_NONE;
u32 reg_val;
int flag;
int i;
struct adapter_info *adap_info = pData;
void __iomem *p;
u32 mode;
for (i = 0, flag = 0; i < adap_info->ch_num; i++) {
p = adap_info->pch_data[i].pch_base_address;
mode = ioread32(p + PCH_I2CMOD);
mode &= BUFFER_MODE | EEPROM_SR_MODE;
if (mode != NORMAL_MODE) {
pch_err(adap_info->pch_data,
"I2C-%d mode(%d) is not supported\n", mode, i);
continue;
}
reg_val = ioread32(p + PCH_I2CSR);
if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) {
pch_i2c_cb(&adap_info->pch_data[i]);
flag = 1;
}
}
reg_val = ioread32(p + PCH_I2CSR);
if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT))
pch_i2c_cb_ch0(adap_data);
else
return IRQ_NONE;
return IRQ_HANDLED;
return flag ? IRQ_HANDLED : IRQ_NONE;
}
/**
......@@ -627,7 +646,7 @@ static irqreturn_t pch_i2c_handler(int irq, void *pData)
* @num: number of messages.
*/
static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg *msgs, s32 num)
struct i2c_msg *msgs, s32 num)
{
struct i2c_msg *pmsg;
u32 i = 0;
......@@ -710,11 +729,13 @@ static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap)
}
static int __devinit pch_i2c_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
const struct pci_device_id *id)
{
void __iomem *base_addr;
s32 ret;
int ret;
int i, j;
struct adapter_info *adap_info;
struct i2c_adapter *pch_adap;
pch_pci_dbg(pdev, "Entered.\n");
......@@ -744,44 +765,48 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
goto err_pci_iomap;
}
adap_info->pch_i2c_suspended = false;
/* Set the number of I2C channel instance */
adap_info->ch_num = id->driver_data;
adap_info->pch_data.p_adapter_info = adap_info;
for (i = 0; i < adap_info->ch_num; i++) {
pch_adap = &adap_info->pch_data[i].pch_adapter;
adap_info->pch_i2c_suspended = false;
adap_info->pch_data.pch_adapter.owner = THIS_MODULE;
adap_info->pch_data.pch_adapter.class = I2C_CLASS_HWMON;
strcpy(adap_info->pch_data.pch_adapter.name, KBUILD_MODNAME);
adap_info->pch_data.pch_adapter.algo = &pch_algorithm;
adap_info->pch_data.pch_adapter.algo_data =
&adap_info->pch_data;
adap_info->pch_data[i].p_adapter_info = adap_info;
/* (i * 0x80) + base_addr; */
adap_info->pch_data.pch_base_address = base_addr;
pch_adap->owner = THIS_MODULE;
pch_adap->class = I2C_CLASS_HWMON;
strcpy(pch_adap->name, KBUILD_MODNAME);
pch_adap->algo = &pch_algorithm;
pch_adap->algo_data = &adap_info->pch_data[i];
adap_info->pch_data.pch_adapter.dev.parent = &pdev->dev;
/* base_addr + offset; */
adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
ret = i2c_add_adapter(&(adap_info->pch_data.pch_adapter));
pch_adap->dev.parent = &pdev->dev;
if (ret) {
pch_pci_err(pdev, "i2c_add_adapter FAILED\n");
goto err_i2c_add_adapter;
}
ret = i2c_add_adapter(pch_adap);
if (ret) {
pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
goto err_i2c_add_adapter;
}
pch_i2c_init(&adap_info->pch_data);
pch_i2c_init(&adap_info->pch_data[i]);
}
ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
KBUILD_MODNAME, &adap_info->pch_data);
KBUILD_MODNAME, adap_info);
if (ret) {
pch_pci_err(pdev, "request_irq FAILED\n");
goto err_request_irq;
goto err_i2c_add_adapter;
}
pci_set_drvdata(pdev, adap_info);
pch_pci_dbg(pdev, "returns %d.\n", ret);
return 0;
err_request_irq:
i2c_del_adapter(&(adap_info->pch_data.pch_adapter));
err_i2c_add_adapter:
for (j = 0; j < i; j++)
i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
pci_iounmap(pdev, base_addr);
err_pci_iomap:
pci_release_regions(pdev);
......@@ -794,17 +819,22 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
static void __devexit pch_i2c_remove(struct pci_dev *pdev)
{
int i;
struct adapter_info *adap_info = pci_get_drvdata(pdev);
pch_i2c_disbl_int(&adap_info->pch_data);
free_irq(pdev->irq, &adap_info->pch_data);
i2c_del_adapter(&(adap_info->pch_data.pch_adapter));
free_irq(pdev->irq, adap_info);
if (adap_info->pch_data.pch_base_address) {
pci_iounmap(pdev, adap_info->pch_data.pch_base_address);
adap_info->pch_data.pch_base_address = 0;
for (i = 0; i < adap_info->ch_num; i++) {
pch_i2c_disbl_int(&adap_info->pch_data[i]);
i2c_del_adapter(&adap_info->pch_data[i].pch_adapter);
}
if (adap_info->pch_data[0].pch_base_address)
pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
for (i = 0; i < adap_info->ch_num; i++)
adap_info->pch_data[i].pch_base_address = 0;
pci_set_drvdata(pdev, NULL);
pci_release_regions(pdev);
......@@ -817,17 +847,22 @@ static void __devexit pch_i2c_remove(struct pci_dev *pdev)
static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
{
int ret;
int i;
struct adapter_info *adap_info = pci_get_drvdata(pdev);
void __iomem *p = adap_info->pch_data.pch_base_address;
void __iomem *p = adap_info->pch_data[0].pch_base_address;
adap_info->pch_i2c_suspended = true;
while ((adap_info->pch_data.pch_i2c_xfer_in_progress)) {
/* Wait until all channel transfers are completed */
msleep(20);
for (i = 0; i < adap_info->ch_num; i++) {
while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) {
/* Wait until all channel transfers are completed */
msleep(20);
}
}
/* Disable the i2c interrupts */
pch_i2c_disbl_int(&adap_info->pch_data);
for (i = 0; i < adap_info->ch_num; i++)
pch_i2c_disbl_int(&adap_info->pch_data[i]);
pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
"invoked function pch_i2c_disbl_int successfully\n",
......@@ -850,6 +885,7 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
static int pch_i2c_resume(struct pci_dev *pdev)
{
int i;
struct adapter_info *adap_info = pci_get_drvdata(pdev);
pci_set_power_state(pdev, PCI_D0);
......@@ -862,7 +898,8 @@ static int pch_i2c_resume(struct pci_dev *pdev)
pci_enable_wake(pdev, PCI_D3hot, 0);
pch_i2c_init(&adap_info->pch_data);
for (i = 0; i < adap_info->ch_num; i++)
pch_i2c_init(&adap_info->pch_data[i]);
adap_info->pch_i2c_suspended = false;
......@@ -894,7 +931,7 @@ static void __exit pch_pci_exit(void)
}
module_exit(pch_pci_exit);
MODULE_DESCRIPTION("PCH I2C PCI Driver");
MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.okisemi.com>");
module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
......
......@@ -118,6 +118,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
mxs_reset_block(i2c->regs);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
}
static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
......@@ -347,8 +349,6 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
/* Do reset to enforce correct startup after pinmuxing */
mxs_i2c_reset(i2c);
writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
i2c->regs + MXS_I2C_QUEUECTRL_SET);
adap = &i2c->adapter;
strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
......
/*
* The CE4100's I2C device is more or less the same one as found on PXA.
* It does not support slave mode, the register slightly moved. This PCI
* device provides three bars, every contains a single I2C controller.
*/
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#define CE4100_PCI_I2C_DEVS 3
struct ce4100_devices {
struct platform_device *pdev[CE4100_PCI_I2C_DEVS];
};
static struct platform_device *add_i2c_device(struct pci_dev *dev, int bar)
{
struct platform_device *pdev;
struct i2c_pxa_platform_data pdata;
struct resource res[2];
struct device_node *child;
static int devnum;
int ret;
memset(&pdata, 0, sizeof(struct i2c_pxa_platform_data));
memset(&res, 0, sizeof(res));
res[0].flags = IORESOURCE_MEM;
res[0].start = pci_resource_start(dev, bar);
res[0].end = pci_resource_end(dev, bar);
res[1].flags = IORESOURCE_IRQ;
res[1].start = dev->irq;
res[1].end = dev->irq;
for_each_child_of_node(dev->dev.of_node, child) {
const void *prop;
struct resource r;
int ret;
ret = of_address_to_resource(child, 0, &r);
if (ret < 0)
continue;
if (r.start != res[0].start)
continue;
if (r.end != res[0].end)
continue;
if (r.flags != res[0].flags)
continue;
prop = of_get_property(child, "fast-mode", NULL);
if (prop)
pdata.fast_mode = 1;
break;
}
if (!child) {
dev_err(&dev->dev, "failed to match a DT node for bar %d.\n",
bar);
ret = -EINVAL;
goto out;
}
pdev = platform_device_alloc("ce4100-i2c", devnum);
if (!pdev) {
of_node_put(child);
ret = -ENOMEM;
goto out;
}
pdev->dev.parent = &dev->dev;
pdev->dev.of_node = child;
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret)
goto err;
ret = platform_device_add_data(pdev, &pdata, sizeof(pdata));
if (ret)
goto err;
ret = platform_device_add(pdev);
if (ret)
goto err;
devnum++;
return pdev;
err:
platform_device_put(pdev);
out:
return ERR_PTR(ret);
}
static int __devinit ce4100_i2c_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int ret;
int i;
struct ce4100_devices *sds;
ret = pci_enable_device_mem(dev);
if (ret)
return ret;
if (!dev->dev.of_node) {
dev_err(&dev->dev, "Missing device tree node.\n");
return -EINVAL;
}
sds = kzalloc(sizeof(*sds), GFP_KERNEL);
if (!sds)
goto err_mem;
for (i = 0; i < ARRAY_SIZE(sds->pdev); i++) {
sds->pdev[i] = add_i2c_device(dev, i);
if (IS_ERR(sds->pdev[i])) {
while (--i >= 0)
platform_device_unregister(sds->pdev[i]);
goto err_dev_add;
}
}
pci_set_drvdata(dev, sds);
return 0;
err_dev_add:
pci_set_drvdata(dev, NULL);
kfree(sds);
err_mem:
pci_disable_device(dev);
return ret;
}
static void __devexit ce4100_i2c_remove(struct pci_dev *dev)
{
struct ce4100_devices *sds;
unsigned int i;
sds = pci_get_drvdata(dev);
pci_set_drvdata(dev, NULL);
for (i = 0; i < ARRAY_SIZE(sds->pdev); i++)
platform_device_unregister(sds->pdev[i]);
pci_disable_device(dev);
kfree(sds);
}
static struct pci_device_id ce4100_i2c_devices[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)},
{ },
};
MODULE_DEVICE_TABLE(pci, ce4100_i2c_devices);
static struct pci_driver ce4100_i2c_driver = {
.name = "ce4100_i2c",
.id_table = ce4100_i2c_devices,
.probe = ce4100_i2c_probe,
.remove = __devexit_p(ce4100_i2c_remove),
};
static int __init ce4100_i2c_init(void)
{
return pci_register_driver(&ce4100_i2c_driver);
}
module_init(ce4100_i2c_init);
static void __exit ce4100_i2c_exit(void)
{
pci_unregister_driver(&ce4100_i2c_driver);
}
module_exit(ce4100_i2c_exit);
MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
......@@ -29,38 +29,75 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/i2c-pxa.h>
#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/irq.h>
#include <plat/i2c.h>
#ifndef CONFIG_HAVE_CLK
#define clk_get(dev, id) NULL
#define clk_put(clk) do { } while (0)
#define clk_disable(clk) do { } while (0)
#define clk_enable(clk) do { } while (0)
#endif
struct pxa_reg_layout {
u32 ibmr;
u32 idbr;
u32 icr;
u32 isr;
u32 isar;
};
enum pxa_i2c_types {
REGS_PXA2XX,
REGS_PXA3XX,
REGS_CE4100,
};
/*
* I2C register offsets will be shifted 0 or 1 bit left, depending on
* different SoCs
* I2C registers definitions
*/
#define REG_SHIFT_0 (0 << 0)
#define REG_SHIFT_1 (1 << 0)
#define REG_SHIFT(d) ((d) & 0x1)
static struct pxa_reg_layout pxa_reg_layout[] = {
[REGS_PXA2XX] = {
.ibmr = 0x00,
.idbr = 0x08,
.icr = 0x10,
.isr = 0x18,
.isar = 0x20,
},
[REGS_PXA3XX] = {
.ibmr = 0x00,
.idbr = 0x04,
.icr = 0x08,
.isr = 0x0c,
.isar = 0x10,
},
[REGS_CE4100] = {
.ibmr = 0x14,
.idbr = 0x0c,
.icr = 0x00,
.isr = 0x04,
/* no isar register */
},
};
static const struct platform_device_id i2c_pxa_id_table[] = {
{ "pxa2xx-i2c", REG_SHIFT_1 },
{ "pxa3xx-pwri2c", REG_SHIFT_0 },
{ "pxa2xx-i2c", REGS_PXA2XX },
{ "pxa3xx-pwri2c", REGS_PXA3XX },
{ "ce4100-i2c", REGS_CE4100 },
{ },
};
MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
/*
* I2C registers and bit definitions
* I2C bit definitions
*/
#define IBMR (0x00)
#define IDBR (0x08)
#define ICR (0x10)
#define ISR (0x18)
#define ISAR (0x20)
#define ICR_START (1 << 0) /* start bit */
#define ICR_STOP (1 << 1) /* stop bit */
......@@ -111,7 +148,11 @@ struct pxa_i2c {
u32 icrlog[32];
void __iomem *reg_base;
unsigned int reg_shift;
void __iomem *reg_ibmr;
void __iomem *reg_idbr;
void __iomem *reg_icr;
void __iomem *reg_isr;
void __iomem *reg_isar;
unsigned long iobase;
unsigned long iosize;
......@@ -121,11 +162,11 @@ struct pxa_i2c {
unsigned int fast_mode :1;
};
#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift))
#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift))
#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift))
#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift))
#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift))
#define _IBMR(i2c) ((i2c)->reg_ibmr)
#define _IDBR(i2c) ((i2c)->reg_idbr)
#define _ICR(i2c) ((i2c)->reg_icr)
#define _ISR(i2c) ((i2c)->reg_isr)
#define _ISAR(i2c) ((i2c)->reg_isar)
/*
* I2C Slave mode address
......@@ -418,7 +459,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
writel(I2C_ISR_INIT, _ISR(i2c));
writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
writel(i2c->slave_addr, _ISAR(i2c));
if (i2c->reg_isar)
writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
......@@ -729,8 +771,10 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
*/
ret = i2c->msg_idx;
if (timeout == 0)
if (!timeout && i2c->msg_num) {
i2c_pxa_scream_blue_murder(i2c, "timeout");
ret = I2C_RETRY;
}
out:
return ret;
......@@ -915,11 +959,16 @@ static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
writel(icr, _ICR(i2c));
}
#define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \
ISR_SAD | ISR_BED)
static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
{
struct pxa_i2c *i2c = dev_id;
u32 isr = readl(_ISR(i2c));
if (!(isr & VALID_INT_SOURCE))
return IRQ_NONE;
if (i2c_debug > 2 && 0) {
dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
__func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
......@@ -934,7 +983,7 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
/*
* Always clear all pending IRQs.
*/
writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c));
writel(isr & VALID_INT_SOURCE, _ISR(i2c));
if (isr & ISR_SAD)
i2c_pxa_slave_start(i2c, isr);
......@@ -1001,6 +1050,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
struct resource *res;
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
const struct platform_device_id *id = platform_get_device_id(dev);
enum pxa_i2c_types i2c_type = id->driver_data;
int ret;
int irq;
......@@ -1044,7 +1094,13 @@ static int i2c_pxa_probe(struct platform_device *dev)
ret = -EIO;
goto eremap;
}
i2c->reg_shift = REG_SHIFT(id->driver_data);
i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
if (i2c_type != REGS_CE4100)
i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
i2c->iobase = res->start;
i2c->iosize = resource_size(res);
......@@ -1072,7 +1128,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.algo = &i2c_pxa_pio_algorithm;
} else {
i2c->adap.algo = &i2c_pxa_algorithm;
ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
ret = request_irq(irq, i2c_pxa_handler, IRQF_SHARED,
i2c->adap.name, i2c);
if (ret)
goto ereqirq;
......@@ -1082,12 +1138,19 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &dev->dev;
#ifdef CONFIG_OF
i2c->adap.dev.of_node = dev->dev.of_node;
#endif
ret = i2c_add_numbered_adapter(&i2c->adap);
if (i2c_type == REGS_CE4100)
ret = i2c_add_adapter(&i2c->adap);
else
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
goto eadapt;
}
of_i2c_register_devices(&i2c->adap);
platform_set_drvdata(dev, i2c);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment