Commit 75ed0b2d authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'at91-5.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT for 5.1

 - Enable QSPI NOR on sama5d2 SoM1
 - replace deprecated gpio-key,wakeup property

* tag 'at91-5.1-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: replace gpio-key,wakeup with wakeup-source property
  ARM: dts: at91: at91-sama5d27_som1_ek: enable qspi1 memory
  ARM: dts: at91: at91-sama5d27_som1: add QSPI1 + SPI NOR memory nodes
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents e1a38b75 31f031f7
...@@ -22,7 +22,7 @@ gpio-keys { ...@@ -22,7 +22,7 @@ gpio-keys {
wakeup { wakeup {
label = "Wakeup"; label = "Wakeup";
linux,code = <10>; linux,code = <10>;
gpio-key,wakeup; wakeup-source;
gpios = <&pioB 27 GPIO_ACTIVE_LOW>; gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
}; };
}; };
......
...@@ -62,6 +62,20 @@ main_xtal { ...@@ -62,6 +62,20 @@ main_xtal {
ahb { ahb {
apb { apb {
qspi1: spi@f0024000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi1_default>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
m25p,fast-read;
};
};
macb0: ethernet@f8008000 { macb0: ethernet@f8008000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_default>; pinctrl-0 = <&pinctrl_macb0_default>;
...@@ -78,6 +92,22 @@ ethernet-phy@0 { ...@@ -78,6 +92,22 @@ ethernet-phy@0 {
pinctrl@fc038000 { pinctrl@fc038000 {
pinctrl_qspi1_default: qspi1_default {
sck_cs {
pinmux = <PIN_PB5__QSPI1_SCK>,
<PIN_PB6__QSPI1_CS>;
bias-disable;
};
data {
pinmux = <PIN_PB7__QSPI1_IO0>,
<PIN_PB8__QSPI1_IO1>,
<PIN_PB9__QSPI1_IO2>,
<PIN_PB10__QSPI1_IO3>;
bias-pull-up;
};
};
pinctrl_macb0_default: macb0_default { pinctrl_macb0_default: macb0_default {
pinmux = <PIN_PD9__GTXCK>, pinmux = <PIN_PD9__GTXCK>,
<PIN_PD10__GTXEN>, <PIN_PD10__GTXEN>,
......
...@@ -109,6 +109,10 @@ isc: isc@f0008000 { ...@@ -109,6 +109,10 @@ isc: isc@f0008000 {
status = "okay"; status = "okay";
}; };
qspi1: spi@f0024000 {
status = "okay";
};
spi0: spi@f8000000 { spi0: spi@f8000000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>; pinctrl-0 = <&pinctrl_spi0_default>;
......
...@@ -22,7 +22,7 @@ irqbtn@18 { ...@@ -22,7 +22,7 @@ irqbtn@18 {
label = "IRQBTN"; label = "IRQBTN";
linux,code = <99>; linux,code = <99>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>; gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
gpio-key,wakeup = <1>; wakeup-source;
}; };
}; };
}; };
......
...@@ -23,7 +23,7 @@ btn0@10 { ...@@ -23,7 +23,7 @@ btn0@10 {
label = "BTNESC"; label = "BTNESC";
linux,code = <1>; /* ESC button */ linux,code = <1>; /* ESC button */
gpios = <&pioA 10 GPIO_ACTIVE_LOW>; gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
gpio-key,wakeup = <1>; wakeup-source;
}; };
irqbtn@31 { irqbtn@31 {
...@@ -31,7 +31,7 @@ irqbtn@31 { ...@@ -31,7 +31,7 @@ irqbtn@31 {
label = "IRQBTN"; label = "IRQBTN";
linux,code = <99>; /* SysReq button */ linux,code = <99>; /* SysReq button */
gpios = <&pioE 31 GPIO_ACTIVE_LOW>; gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
gpio-key,wakeup = <1>; wakeup-source;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment