Commit 7670c701 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://github.com/gregungerer/m68knommu

* 'for-linus' of git://github.com/gregungerer/m68knommu:
  m68k: drop unused Kconfig symbols
  m68k: drop unused Kconfig symbols
  m68knommu: create common externs for _ram* vars
  m68knommu: remove extern declarations of memory_start/memory_end from mm/init
  m68knommu: use generic section names in mm/init code
  m68knommu: use generic section names in setup code
  m68k: merge the mmu and non-mmu traps.c files
  m68k: move hardware vector setting from traps.c to its own file
  m68k: merge mmu and non-mmu include/asm/entry.h files
  m68k: merge the mmu and non-mmu kernel/Makefiles
  m68k: merge mmu and non-mmu arch Makefiles
  m68k: reorganize Kconfig options to improve mmu/non-mmu selections
  m68knommu: fix problems with SPI/GPIO on ColdFire 520x
  m68k: fix memcpy to unmatched/unaligned source and dest on 68000
parents 0110bba5 dbcbf588
......@@ -21,6 +21,15 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
config GENERIC_CLOCKEVENTS
bool
config GENERIC_CMOS_UPDATE
def_bool !MMU
config GENERIC_GPIO
bool
config GENERIC_HWEIGHT
bool
default y
......@@ -29,10 +38,16 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
config GENERIC_IOMAP
def_bool MMU
config TIME_LOW_RES
bool
default y
config ARCH_USES_GETTIMEOFFSET
def_bool MMU
config NO_IOPORT
def_bool y
......@@ -62,13 +77,31 @@ config MMU
Select if you want MMU-based virtualised addressing space
support by paged memory management. If unsure, say 'Y'.
menu "Platform dependent setup"
config MMU_MOTOROLA
bool
if MMU
source arch/m68k/Kconfig.mmu
config MMU_SUN3
bool
depends on MMU && !MMU_MOTOROLA
menu "Platform setup"
source arch/m68k/Kconfig.cpu
source arch/m68k/Kconfig.machine
source arch/m68k/Kconfig.bus
endmenu
menu "Kernel Features"
if COLDFIRE
source "kernel/Kconfig.preempt"
endif
if !MMU
source arch/m68k/Kconfig.nommu
if !MMU || COLDFIRE
source "kernel/time/Kconfig"
endif
source "mm/Kconfig"
......@@ -96,151 +129,7 @@ source "net/Kconfig"
source "drivers/Kconfig"
if MMU
menu "Character devices"
config ATARI_MFPSER
tristate "Atari MFP serial support"
depends on ATARI
---help---
If you like to use the MFP serial ports ("Modem1", "Serial1") under
Linux, say Y. The driver equally supports all kinds of MFP serial
ports and automatically detects whether Serial1 is available.
To compile this driver as a module, choose M here.
Note for Falcon users: You also have an MFP port, it's just not
wired to the outside... But you could use the port under Linux.
config ATARI_MIDI
tristate "Atari MIDI serial support"
depends on ATARI
help
If you want to use your Atari's MIDI port in Linux, say Y.
To compile this driver as a module, choose M here.
config ATARI_DSP56K
tristate "Atari DSP56k support (EXPERIMENTAL)"
depends on ATARI && EXPERIMENTAL
help
If you want to be able to use the DSP56001 in Falcons, say Y. This
driver is still experimental, and if you don't know what it is, or
if you don't have this processor, just say N.
To compile this driver as a module, choose M here.
config AMIGA_BUILTIN_SERIAL
tristate "Amiga builtin serial support"
depends on AMIGA
help
If you want to use your Amiga's built-in serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on AMIGA
help
If you want to use a Multiface III card's serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config GVPIOEXT
tristate "GVP IO-Extender support"
depends on PARPORT=n && ZORRO
help
If you want to use a GVP IO-Extender serial card in Linux, say Y.
Otherwise, say N.
config GVPIOEXT_LP
tristate "GVP IO-Extender parallel printer support"
depends on GVPIOEXT
help
Say Y to enable driving a printer from the parallel port on your
GVP IO-Extender card, N otherwise.
config GVPIOEXT_PLIP
tristate "GVP IO-Extender PLIP support"
depends on GVPIOEXT
help
Say Y to enable doing IP over the parallel port on your GVP
IO-Extender card, N otherwise.
config MAC_HID
bool
depends on INPUT_ADBHID
default y
config HPDCA
tristate "HP DCA serial support"
depends on DIO && SERIAL_8250
help
If you want to use the internal "DCA" serial ports on an HP300
machine, say Y here.
config HPAPCI
tristate "HP APCI serial support"
depends on HP300 && SERIAL_8250 && EXPERIMENTAL
help
If you want to use the internal "APCI" serial ports on an HP400
machine, say Y here.
config MVME147_SCC
bool "SCC support for MVME147 serial ports"
depends on MVME147 && BROKEN
help
This is the driver for the serial ports on the Motorola MVME147
boards. Everyone using one of these boards should say Y here.
config MVME162_SCC
bool "SCC support for MVME162 serial ports"
depends on MVME16x && BROKEN
help
This is the driver for the serial ports on the Motorola MVME162 and
172 boards. Everyone using one of these boards should say Y here.
config BVME6000_SCC
bool "SCC support for BVME6000 serial ports"
depends on BVME6000 && BROKEN
help
This is the driver for the serial ports on the BVME4000 and BVME6000
boards from BVM Ltd. Everyone using one of these boards should say
Y here.
config DN_SERIAL
bool "Support for DN serial port (dummy)"
depends on APOLLO
config SERIAL_CONSOLE
bool "Support for serial port console"
depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode). This could be useful if some terminal or printer is connected
to that serial port.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
If you don't have a VGA card installed and you say Y here, the
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
If unsure, say N.
endmenu
endif
source "arch/m68k/Kconfig.devices"
source "fs/Kconfig"
......
if MMU
comment "Bus Support"
config NUBUS
bool
depends on MAC
default y
config ZORRO
bool "Amiga Zorro (AutoConfig) bus support"
depends on AMIGA
help
This enables support for the Zorro bus in the Amiga. If you have
expansion cards in your Amiga that conform to the Amiga
AutoConfig(tm) specification, say Y, otherwise N. Note that even
expansion cards that do not fit in the Zorro slots but fit in e.g.
the CPU slot may fall in this category, so you have to say Y to let
Linux use these.
config AMIGA_PCMCIA
bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
depends on AMIGA && EXPERIMENTAL
help
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
600. If you intend to use pcmcia cards say Y; otherwise say N.
config ISA
bool
depends on Q40 || AMIGA_PCMCIA
default y
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. Other bus systems are PCI, EISA, MicroChannel
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N.
config GENERIC_ISA_DMA
def_bool ISA
source "drivers/pci/Kconfig"
source "drivers/zorro/Kconfig"
endif
if !MMU
config ISA_DMA_API
def_bool !M5272
source "drivers/pcmcia/Kconfig"
endif
if MMU
config ARCH_MAY_HAVE_PC_FDC
bool
depends on BROKEN && (Q40 || SUN3X)
default y
menu "Platform devices"
config HEARTBEAT
bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
a hyperbolic function of the 5-minute load average.
# We have a dedicated heartbeat LED. :-)
config PROC_HARDWARE
bool "/proc/hardware support"
help
Say Y here to support the /proc/hardware file, which gives you
access to information about the machine you're running on,
including the model, CPU, MMU, clock speed, BogoMIPS rating,
and memory size.
endmenu
menu "Character devices"
config ATARI_MFPSER
tristate "Atari MFP serial support"
depends on ATARI
---help---
If you like to use the MFP serial ports ("Modem1", "Serial1") under
Linux, say Y. The driver equally supports all kinds of MFP serial
ports and automatically detects whether Serial1 is available.
To compile this driver as a module, choose M here.
Note for Falcon users: You also have an MFP port, it's just not
wired to the outside... But you could use the port under Linux.
config ATARI_MIDI
tristate "Atari MIDI serial support"
depends on ATARI
help
If you want to use your Atari's MIDI port in Linux, say Y.
To compile this driver as a module, choose M here.
config ATARI_DSP56K
tristate "Atari DSP56k support (EXPERIMENTAL)"
depends on ATARI && EXPERIMENTAL
help
If you want to be able to use the DSP56001 in Falcons, say Y. This
driver is still experimental, and if you don't know what it is, or
if you don't have this processor, just say N.
To compile this driver as a module, choose M here.
config AMIGA_BUILTIN_SERIAL
tristate "Amiga builtin serial support"
depends on AMIGA
help
If you want to use your Amiga's built-in serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on AMIGA
help
If you want to use a Multiface III card's serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config HPDCA
tristate "HP DCA serial support"
depends on DIO && SERIAL_8250
help
If you want to use the internal "DCA" serial ports on an HP300
machine, say Y here.
config HPAPCI
tristate "HP APCI serial support"
depends on HP300 && SERIAL_8250 && EXPERIMENTAL
help
If you want to use the internal "APCI" serial ports on an HP400
machine, say Y here.
config DN_SERIAL
bool "Support for DN serial port (dummy)"
depends on APOLLO
config SERIAL_CONSOLE
bool "Support for serial port console"
depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode). This could be useful if some terminal or printer is connected
to that serial port.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
If you don't have a VGA card installed and you say Y here, the
kernel will automatically use the first serial line, /dev/ttyS0, as
system console.
If unsure, say N.
endmenu
endif
#
# m68k/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Hamish Macdonald
# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
#
KBUILD_DEFCONFIG := multi_defconfig
#
# Enable processor type. Ordering of these is important - we want to
# use the minimum processor type of the range we support. The logic
# for 680x0 will only allow use of the -m68060 or -m68040 if no other
# 680x0 type is specified - and no option is specified for 68030 or
# 68020. The other m68k/ColdFire types always specify some type of
# compiler cpu type flag.
#
ifndef CONFIG_M68040
cpuflags-$(CONFIG_M68060) := -m68060
endif
ifndef CONFIG_M68060
cpuflags-$(CONFIG_M68040) := -m68040
endif
cpuflags-$(CONFIG_M68030) :=
cpuflags-$(CONFIG_M68020) :=
cpuflags-$(CONFIG_M68360) := -m68332
cpuflags-$(CONFIG_M68000) := -m68000
cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
KBUILD_AFLAGS += $(cpuflags-y)
KBUILD_CFLAGS += $(cpuflags-y) -pipe
ifdef CONFIG_MMU
include $(srctree)/arch/m68k/Makefile_mm
# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
else
# we can use a m68k-linux-gcc toolchain with these in place
KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
KBUILD_CFLAGS += -D__uClinux__
KBUILD_AFLAGS += -D__uClinux__
endif
LDFLAGS := -m m68kelf
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, \
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
endif
endif
ifdef CONFIG_SUN3
LDFLAGS_vmlinux = -N
endif
CHECKFLAGS += -D__mc68000__
ifdef CONFIG_KGDB
# If configured for kgdb support, include debugging infos and keep the
# frame pointer
KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
endif
#
# Select the assembler head startup code. Order is important. The default
# head code is first, processor specific selections can override it after.
#
head-y := arch/m68k/kernel/head.o
head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o
head-$(CONFIG_M68360) := arch/m68k/platform/68360/head.o
head-$(CONFIG_M68000) := arch/m68k/platform/68328/head.o
head-$(CONFIG_COLDFIRE) := arch/m68k/platform/coldfire/head.o
core-y += arch/m68k/kernel/ arch/m68k/mm/
libs-y += arch/m68k/lib/
core-$(CONFIG_Q40) += arch/m68k/q40/
core-$(CONFIG_AMIGA) += arch/m68k/amiga/
core-$(CONFIG_ATARI) += arch/m68k/atari/
core-$(CONFIG_MAC) += arch/m68k/mac/
core-$(CONFIG_HP300) += arch/m68k/hp300/
core-$(CONFIG_APOLLO) += arch/m68k/apollo/
core-$(CONFIG_MVME147) += arch/m68k/mvme147/
core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/
core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/
core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/
core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/
core-$(CONFIG_NATFEAT) += arch/m68k/emu/
core-$(CONFIG_M68040) += arch/m68k/fpsp040/
core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
core-$(CONFIG_M68360) += arch/m68k/platform/68360/
core-$(CONFIG_M68000) += arch/m68k/platform/68328/
core-$(CONFIG_M68EZ328) += arch/m68k/platform/68EZ328/
core-$(CONFIG_M68VZ328) += arch/m68k/platform/68VZ328/
core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/
core-$(CONFIG_M5206) += arch/m68k/platform/5206/
core-$(CONFIG_M5206e) += arch/m68k/platform/5206/
core-$(CONFIG_M520x) += arch/m68k/platform/520x/
core-$(CONFIG_M523x) += arch/m68k/platform/523x/
core-$(CONFIG_M5249) += arch/m68k/platform/5249/
core-$(CONFIG_M527x) += arch/m68k/platform/527x/
core-$(CONFIG_M5272) += arch/m68k/platform/5272/
core-$(CONFIG_M528x) += arch/m68k/platform/528x/
core-$(CONFIG_M5307) += arch/m68k/platform/5307/
core-$(CONFIG_M532x) += arch/m68k/platform/532x/
core-$(CONFIG_M5407) += arch/m68k/platform/5407/
core-$(CONFIG_M54xx) += arch/m68k/platform/54xx/
all: zImage
lilo: vmlinux
if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat vmlinux > $(INSTALL_PATH)/vmlinux
cp System.map $(INSTALL_PATH)/System.map
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
zImage compressed: vmlinux.gz
vmlinux.gz: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
gzip -9c vmlinux.tmp >vmlinux.gz
rm vmlinux.tmp
else
include $(srctree)/arch/m68k/Makefile_no
gzip -9c vmlinux >vmlinux.gz
endif
bzImage: vmlinux.bz2
vmlinux.bz2: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
bzip2 -1c vmlinux.tmp >vmlinux.bz2
rm vmlinux.tmp
else
bzip2 -1c vmlinux >vmlinux.bz2
endif
archclean:
rm -f vmlinux.gz vmlinux.bz2
install:
sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
#
# m68k/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Hamish Macdonald
#
# override top level makefile
AS += -m68020
LDFLAGS := -m m68kelf
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, \
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
endif
endif
ifdef CONFIG_SUN3
LDFLAGS_vmlinux = -N
endif
CHECKFLAGS += -D__mc68000__
# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2
# enable processor switch if compiled only for a single cpu
ifndef CONFIG_M68020
ifndef CONFIG_M68030
ifndef CONFIG_M68060
KBUILD_CFLAGS += -m68040
endif
ifndef CONFIG_M68040
KBUILD_CFLAGS += -m68060
endif
endif
endif
ifdef CONFIG_KGDB
# If configured for kgdb support, include debugging infos and keep the
# frame pointer
KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
endif
ifndef CONFIG_SUN3
head-y := arch/m68k/kernel/head.o
else
head-y := arch/m68k/kernel/sun3-head.o
endif
core-y += arch/m68k/kernel/ arch/m68k/mm/
libs-y += arch/m68k/lib/
core-$(CONFIG_Q40) += arch/m68k/q40/
core-$(CONFIG_AMIGA) += arch/m68k/amiga/
core-$(CONFIG_ATARI) += arch/m68k/atari/
core-$(CONFIG_MAC) += arch/m68k/mac/
core-$(CONFIG_HP300) += arch/m68k/hp300/
core-$(CONFIG_APOLLO) += arch/m68k/apollo/
core-$(CONFIG_MVME147) += arch/m68k/mvme147/
core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/
core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/
core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/
core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/
core-$(CONFIG_NATFEAT) += arch/m68k/emu/
core-$(CONFIG_M68040) += arch/m68k/fpsp040/
core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
all: zImage
lilo: vmlinux
if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat vmlinux > $(INSTALL_PATH)/vmlinux
cp System.map $(INSTALL_PATH)/System.map
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
zImage compressed: vmlinux.gz
vmlinux.gz: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
gzip -9c vmlinux.tmp >vmlinux.gz
rm vmlinux.tmp
else
gzip -9c vmlinux >vmlinux.gz
endif
bzImage: vmlinux.bz2
vmlinux.bz2: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
bzip2 -1c vmlinux.tmp >vmlinux.bz2
rm vmlinux.tmp
else
bzip2 -1c vmlinux >vmlinux.bz2
endif
archclean:
rm -f vmlinux.gz vmlinux.bz2
install:
sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
#
# arch/m68k/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com>
#
platform-$(CONFIG_M68328) := 68328
platform-$(CONFIG_M68EZ328) := 68EZ328
platform-$(CONFIG_M68VZ328) := 68VZ328
platform-$(CONFIG_M68360) := 68360
platform-$(CONFIG_M5206) := 5206
platform-$(CONFIG_M5206e) := 5206
platform-$(CONFIG_M520x) := 520x
platform-$(CONFIG_M523x) := 523x
platform-$(CONFIG_M5249) := 5249
platform-$(CONFIG_M527x) := 527x
platform-$(CONFIG_M5272) := 5272
platform-$(CONFIG_M528x) := 528x
platform-$(CONFIG_M5307) := 5307
platform-$(CONFIG_M532x) := 532x
platform-$(CONFIG_M5407) := 5407
platform-$(CONFIG_M54xx) := 54xx
PLATFORM := $(platform-y)
board-$(CONFIG_PILOT) := pilot
board-$(CONFIG_UC5272) := UC5272
board-$(CONFIG_UC5282) := UC5282
board-$(CONFIG_UCSIMM) := ucsimm
board-$(CONFIG_UCDIMM) := ucdimm
board-$(CONFIG_UCQUICC) := uCquicc
board-$(CONFIG_DRAGEN2) := de2
board-$(CONFIG_ARNEWSH) := ARNEWSH
board-$(CONFIG_FREESCALE) := FREESCALE
board-$(CONFIG_M5235EVB) := M5235EVB
board-$(CONFIG_M5271EVB) := M5271EVB
board-$(CONFIG_M5275EVB) := M5275EVB
board-$(CONFIG_M5282EVB) := M5282EVB
board-$(CONFIG_ELITE) := eLITE
board-$(CONFIG_NETtel) := NETtel
board-$(CONFIG_SECUREEDGEMP3) := MP3
board-$(CONFIG_CLEOPATRA) := CLEOPATRA
board-$(CONFIG_senTec) := senTec
board-$(CONFIG_SNEHA) := SNEHA
board-$(CONFIG_M5208EVB) := M5208EVB
board-$(CONFIG_MOD5272) := MOD5272
board-$(CONFIG_AVNET) := AVNET
board-$(CONFIG_SAVANT) := SAVANT
BOARD := $(board-y)
model-$(CONFIG_RAMKERNEL) := ram
model-$(CONFIG_ROMKERNEL) := rom
MODEL := $(model-y)
#
# Some code support is grouped together for a common cpu-subclass (for
# example all ColdFire cpu's are very similar). Determine the sub-class
# for the selected cpu. ONLY need to define this for the non-base member
# of the family.
#
cpuclass-$(CONFIG_M5206) := coldfire
cpuclass-$(CONFIG_M5206e) := coldfire
cpuclass-$(CONFIG_M520x) := coldfire
cpuclass-$(CONFIG_M523x) := coldfire
cpuclass-$(CONFIG_M5249) := coldfire
cpuclass-$(CONFIG_M527x) := coldfire
cpuclass-$(CONFIG_M5272) := coldfire
cpuclass-$(CONFIG_M528x) := coldfire
cpuclass-$(CONFIG_M5307) := coldfire
cpuclass-$(CONFIG_M532x) := coldfire
cpuclass-$(CONFIG_M5407) := coldfire
cpuclass-$(CONFIG_M54xx) := coldfire
cpuclass-$(CONFIG_M68328) := 68328
cpuclass-$(CONFIG_M68EZ328) := 68328
cpuclass-$(CONFIG_M68VZ328) := 68328
cpuclass-$(CONFIG_M68360) := 68360
CPUCLASS := $(cpuclass-y)
ifneq ($(CPUCLASS),$(PLATFORM))
CLASSDIR := arch/m68k/platform/$(cpuclass-y)/
endif
export PLATFORM BOARD MODEL CPUCLASS
#
# Some CFLAG additions based on specific CPU type.
#
cflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
cflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
cflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
cflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
cflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
cflags-$(CONFIG_M68328) := -m68000
cflags-$(CONFIG_M68EZ328) := -m68000
cflags-$(CONFIG_M68VZ328) := -m68000
cflags-$(CONFIG_M68360) := -m68332
KBUILD_AFLAGS += $(cflags-y)
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -D__linux__
KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
head-y := arch/m68k/platform/$(cpuclass-y)/head.o
core-y += arch/m68k/kernel/ \
arch/m68k/mm/ \
$(CLASSDIR) \
arch/m68k/platform/$(PLATFORM)/
libs-y += arch/m68k/lib/
archclean:
#ifdef __uClinux__
#include "entry_no.h"
#ifndef __M68K_ENTRY_H
#define __M68K_ENTRY_H
#include <asm/setup.h>
#include <asm/page.h>
#ifdef __ASSEMBLY__
#include <asm/thread_info.h>
#endif
/*
* Stack layout in 'ret_from_exception':
*
* This allows access to the syscall arguments in registers d1-d5
*
* 0(sp) - d1
* 4(sp) - d2
* 8(sp) - d3
* C(sp) - d4
* 10(sp) - d5
* 14(sp) - a0
* 18(sp) - a1
* 1C(sp) - a2
* 20(sp) - d0
* 24(sp) - orig_d0
* 28(sp) - stack adjustment
* 2C(sp) - [ sr ] [ format & vector ]
* 2E(sp) - [ pc-hiword ] [ sr ]
* 30(sp) - [ pc-loword ] [ pc-hiword ]
* 32(sp) - [ format & vector ] [ pc-loword ]
* ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
* M68K COLDFIRE
*/
/* the following macro is used when enabling interrupts */
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari */
#define ALLOWINT (~0x400)
#define MAX_NOINT_IPL 3
#else
#include "entry_mm.h"
/* portable version */
#define ALLOWINT (~0x700)
#define MAX_NOINT_IPL 0
#endif /* machine compilation types */
#ifdef __ASSEMBLY__
/*
* This defines the normal kernel pt-regs layout.
*
* regs a3-a6 and d6-d7 are preserved by C code
* the kernel doesn't mess with usp unless it needs to
*/
#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
#ifdef CONFIG_COLDFIRE
#ifdef CONFIG_COLDFIRE_SW_A7
/*
* This is made a little more tricky on older ColdFires. There is no
* separate supervisor and user stack pointers. Need to artificially
* construct a usp in software... When doing this we need to disable
* interrupts, otherwise bad things will happen.
*/
.globl sw_usp
.globl sw_ksp
.macro SAVE_ALL_SYS
move #0x2700,%sr /* disable intrs */
btst #5,%sp@(2) /* from user? */
bnes 6f /* no, skip */
movel %sp,sw_usp /* save user sp */
addql #8,sw_usp /* remove exception */
movel sw_ksp,%sp /* kernel sp */
subql #8,%sp /* room for exception */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
movel sw_usp,%a0 /* get usp */
movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
bra 7f
6:
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
7:
.endm
.macro SAVE_ALL_INT
SAVE_ALL_SYS
moveq #-1,%d0 /* not system call entry */
movel %d0,%sp@(PT_OFF_ORIG_D0)
.endm
.macro RESTORE_USER
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
addql #8,%sp /* remove exception */
movel %sp,sw_ksp /* save ksp */
subql #8,sw_usp /* set exception */
movel sw_usp,%sp /* restore usp */
rte
.endm
.macro RDUSP
movel sw_usp,%a3
.endm
.macro WRUSP
movel %a3,sw_usp
.endm
#else /* !CONFIG_COLDFIRE_SW_A7 */
/*
* Modern ColdFire parts have separate supervisor and user stack
* pointers. Simple load and restore macros for this case.
*/
.macro SAVE_ALL_SYS
move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
.endm
.macro SAVE_ALL_INT
move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */
pea -1:w /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
.endm
.macro RESTORE_USER
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
rte
.endm
.macro RDUSP
/*move %usp,%a3*/
.word 0x4e6b
.endm
.macro WRUSP
/*move %a3,%usp*/
.word 0x4e63
.endm
#endif /* !CONFIG_COLDFIRE_SW_A7 */
.macro SAVE_SWITCH_STACK
lea %sp@(-24),%sp /* 6 regs */
moveml %a3-%a6/%d6-%d7,%sp@
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@,%a3-%a6/%d6-%d7
lea %sp@(24),%sp /* 6 regs */
.endm
#else /* !CONFIG_COLDFIRE */
/*
* All other types of m68k parts (68000, 680x0, CPU32) have the same
* entry and exit code.
*/
/*
* a -1 in the orig_d0 field signifies
* that the stack frame is NOT for syscall
*/
.macro SAVE_ALL_INT
clrl %sp@- /* stk_adj */
pea -1:w /* orig d0 */
movel %d0,%sp@- /* d0 */
moveml %d1-%d5/%a0-%a2,%sp@-
.endm
.macro SAVE_ALL_SYS
clrl %sp@- /* stk_adj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
moveml %d1-%d5/%a0-%a2,%sp@-
.endm
.macro RESTORE_ALL
moveml %sp@+,%a0-%a2/%d1-%d5
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stk adj */
rte
.endm
.macro SAVE_SWITCH_STACK
moveml %a3-%a6/%d6-%d7,%sp@-
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@+,%a3-%a6/%d6-%d7
.endm
#endif /* !CONFIG_COLDFIRE */
/*
* Register %a2 is reserved and set to current task on MMU enabled systems.
* Non-MMU systems do not reserve %a2 in this way, and this definition is
* not used for them.
*/
#define curptr a2
#define GET_CURRENT(tmp) get_current tmp
.macro get_current reg=%d0
movel %sp,\reg
andw #-THREAD_SIZE,\reg
movel \reg,%curptr
movel %curptr@,%curptr
.endm
#else /* C source */
#define STR(X) STR1(X)
#define STR1(X) #X
#define SAVE_ALL_INT \
"clrl %%sp@-;" /* stk_adj */ \
"pea -1:w;" /* orig d0 = -1 */ \
"movel %%d0,%%sp@-;" /* d0 */ \
"moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
#define GET_CURRENT(tmp) \
"movel %%sp,"#tmp"\n\t" \
"andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
"movel "#tmp",%%a2\n\t" \
"movel %%a2@,%%a2"
#endif
#endif /* __M68K_ENTRY_H */
#ifndef __M68K_ENTRY_H
#define __M68K_ENTRY_H
#include <asm/setup.h>
#include <asm/page.h>
#ifdef __ASSEMBLY__
#include <asm/thread_info.h>
#endif
/*
* Stack layout in 'ret_from_exception':
*
* This allows access to the syscall arguments in registers d1-d5
*
* 0(sp) - d1
* 4(sp) - d2
* 8(sp) - d3
* C(sp) - d4
* 10(sp) - d5
* 14(sp) - a0
* 18(sp) - a1
* 1C(sp) - a2
* 20(sp) - d0
* 24(sp) - orig_d0
* 28(sp) - stack adjustment
* 2C(sp) - sr
* 2E(sp) - pc
* 32(sp) - format & vector
*/
/*
* 97/05/14 Andreas: Register %a2 is now set to the current task throughout
* the whole kernel.
*/
/* the following macro is used when enabling interrupts */
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari */
#define ALLOWINT (~0x400)
#define MAX_NOINT_IPL 3
#else
/* portable version */
#define ALLOWINT (~0x700)
#define MAX_NOINT_IPL 0
#endif /* machine compilation types */
#ifdef __ASSEMBLY__
#define curptr a2
LFLUSH_I_AND_D = 0x00000808
#define SAVE_ALL_INT save_all_int
#define SAVE_ALL_SYS save_all_sys
#define RESTORE_ALL restore_all
/*
* This defines the normal kernel pt-regs layout.
*
* regs a3-a6 and d6-d7 are preserved by C code
* the kernel doesn't mess with usp unless it needs to
*/
/*
* a -1 in the orig_d0 field signifies
* that the stack frame is NOT for syscall
*/
.macro save_all_int
clrl %sp@- | stk_adj
pea -1:w | orig d0
movel %d0,%sp@- | d0
moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
.endm
.macro save_all_sys
clrl %sp@- | stk_adj
movel %d0,%sp@- | orig d0
movel %d0,%sp@- | d0
moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
.endm
.macro restore_all
moveml %sp@+,%a0-%a1/%curptr/%d1-%d5
movel %sp@+,%d0
addql #4,%sp | orig d0
addl %sp@+,%sp | stk adj
rte
.endm
#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
#define SAVE_SWITCH_STACK save_switch_stack
#define RESTORE_SWITCH_STACK restore_switch_stack
#define GET_CURRENT(tmp) get_current tmp
.macro save_switch_stack
moveml %a3-%a6/%d6-%d7,%sp@-
.endm
.macro restore_switch_stack
moveml %sp@+,%a3-%a6/%d6-%d7
.endm
.macro get_current reg=%d0
movel %sp,\reg
andw #-THREAD_SIZE,\reg
movel \reg,%curptr
movel %curptr@,%curptr
.endm
#else /* C source */
#define STR(X) STR1(X)
#define STR1(X) #X
#define SAVE_ALL_INT \
"clrl %%sp@-;" /* stk_adj */ \
"pea -1:w;" /* orig d0 = -1 */ \
"movel %%d0,%%sp@-;" /* d0 */ \
"moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
#define GET_CURRENT(tmp) \
"movel %%sp,"#tmp"\n\t" \
"andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
"movel "#tmp",%%a2\n\t" \
"movel %%a2@,%%a2"
#endif
#endif /* __M68K_ENTRY_H */
#ifndef __M68KNOMMU_ENTRY_H
#define __M68KNOMMU_ENTRY_H
#include <asm/setup.h>
#include <asm/page.h>
/*
* Stack layout in 'ret_from_exception':
*
* This allows access to the syscall arguments in registers d1-d5
*
* 0(sp) - d1
* 4(sp) - d2
* 8(sp) - d3
* C(sp) - d4
* 10(sp) - d5
* 14(sp) - a0
* 18(sp) - a1
* 1C(sp) - a2
* 20(sp) - d0
* 24(sp) - orig_d0
* 28(sp) - stack adjustment
* 2C(sp) - [ sr ] [ format & vector ]
* 2E(sp) - [ pc-hiword ] [ sr ]
* 30(sp) - [ pc-loword ] [ pc-hiword ]
* 32(sp) - [ format & vector ] [ pc-loword ]
* ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
* M68K COLDFIRE
*/
#define ALLOWINT (~0x700)
#ifdef __ASSEMBLY__
#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */
/*
* This defines the normal kernel pt-regs layout.
*
* regs are a2-a6 and d6-d7 preserved by C code
* the kernel doesn't mess with usp unless it needs to
*/
#ifdef CONFIG_COLDFIRE
#ifdef CONFIG_COLDFIRE_SW_A7
/*
* This is made a little more tricky on older ColdFires. There is no
* separate supervisor and user stack pointers. Need to artificially
* construct a usp in software... When doing this we need to disable
* interrupts, otherwise bad things will happen.
*/
.globl sw_usp
.globl sw_ksp
.macro SAVE_ALL
move #0x2700,%sr /* disable intrs */
btst #5,%sp@(2) /* from user? */
bnes 6f /* no, skip */
movel %sp,sw_usp /* save user sp */
addql #8,sw_usp /* remove exception */
movel sw_ksp,%sp /* kernel sp */
subql #8,%sp /* room for exception */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
movel sw_usp,%a0 /* get usp */
movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
bra 7f
6:
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
7:
.endm
.macro RESTORE_USER
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
addql #8,%sp /* remove exception */
movel %sp,sw_ksp /* save ksp */
subql #8,sw_usp /* set exception */
movel sw_usp,%sp /* restore usp */
rte
.endm
.macro RDUSP
movel sw_usp,%a3
.endm
.macro WRUSP
movel %a3,sw_usp
.endm
#else /* !CONFIG_COLDFIRE_SW_A7 */
/*
* Modern ColdFire parts have separate supervisor and user stack
* pointers. Simple load and restore macros for this case.
*/
.macro SAVE_ALL
move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
.endm
.macro RESTORE_USER
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
rte
.endm
.macro RDUSP
/*move %usp,%a3*/
.word 0x4e6b
.endm
.macro WRUSP
/*move %a3,%usp*/
.word 0x4e63
.endm
#endif /* !CONFIG_COLDFIRE_SW_A7 */
.macro SAVE_SWITCH_STACK
lea %sp@(-24),%sp /* 6 regs */
moveml %a3-%a6/%d6-%d7,%sp@
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@,%a3-%a6/%d6-%d7
lea %sp@(24),%sp /* 6 regs */
.endm
#else /* !CONFIG_COLDFIRE */
/*
* Standard 68k interrupt entry and exit macros.
*/
.macro SAVE_ALL
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
moveml %d1-%d5/%a0-%a2,%sp@-
.endm
.macro RESTORE_ALL
moveml %sp@+,%a0-%a2/%d1-%d5
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
rte
.endm
.macro SAVE_SWITCH_STACK
moveml %a3-%a6/%d6-%d7,%sp@-
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@+,%a3-%a6/%d6-%d7
.endm
#endif /* !COLDFIRE_SW_A7 */
#endif /* __ASSEMBLY__ */
#endif /* __M68KNOMMU_ENTRY_H */
......@@ -90,15 +90,13 @@
#define MCFGPIO_PDDR_FECH 0xFC0A4013
#define MCFGPIO_PDDR_FECL 0xFC0A4014
#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A
#define MCFGPIO_PPDSDR_BE 0xFC0A401B
#define MCFGPIO_PPDSDR_CS 0xFC0A401C
#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D
#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E
#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F
#define MCFGPIO_PPDSDR_UART 0xFC0A4021
#define MCFGPIO_PPDSDR_FECH 0xFC0A4021
#define MCFGPIO_PPDSDR_FECL 0xFC0A4022
#define MCFGPIO_PPDSDR_CS 0xFC0A401A
#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401B
#define MCFGPIO_PPDSDR_QSPI 0xFC0A401C
#define MCFGPIO_PPDSDR_TIMER 0xFC0A401D
#define MCFGPIO_PPDSDR_UART 0xFC0A401E
#define MCFGPIO_PPDSDR_FECH 0xFC0A401F
#define MCFGPIO_PPDSDR_FECL 0xFC0A4020
#define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024
#define MCFGPIO_PCLRR_BE 0xFC0A4025
......@@ -113,11 +111,11 @@
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL
#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL
#define MCFGPIO_PODR MCFGPIO_PODR_CS
#define MCFGPIO_PDDR MCFGPIO_PDDR_CS
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_CS
#define MCFGPIO_SETR MCFGPIO_PPDSDR_CS
#define MCFGPIO_CLRR MCFGPIO_PCLRR_CS
#define MCFGPIO_PIN_MAX 80
#define MCFGPIO_IRQ_MAX 8
......
......@@ -25,7 +25,9 @@
#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
#elif defined(CONFIG_M5249)
#define MCFQSPI_IOBASE (MCF_MBAR + 0x300)
#elif defined(CONFIG_M520x) || defined(CONFIG_M532x)
#elif defined(CONFIG_M520x)
#define MCFQSPI_IOBASE 0xFC05C000
#elif defined(CONFIG_M532x)
#define MCFQSPI_IOBASE 0xFC058000
#endif
#define MCFQSPI_IOSIZE 0x40
......
......@@ -5,6 +5,9 @@
extern unsigned long memory_start;
extern unsigned long memory_end;
extern unsigned long _rambase;
extern unsigned long _ramstart;
extern unsigned long _ramend;
#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
#define free_user_page(page, addr) free_page(addr)
......
......@@ -135,6 +135,12 @@ do { \
wrusp(_usp); \
} while(0)
static inline int handle_kernel_fault(struct pt_regs *regs)
{
/* Any fault in kernel is fatal on non-mmu */
return 0;
}
#endif
/* Forward declaration, a strange C thing */
......
......@@ -3,4 +3,6 @@
#include <asm-generic/sections.h>
extern char _sbss[], _ebss[];
#endif /* _ASM_M68K_SECTIONS_H */
ifdef CONFIG_MMU
include arch/m68k/kernel/Makefile_mm
else
include arch/m68k/kernel/Makefile_no
#
# Makefile for the linux kernel.
#
extra-$(CONFIG_MMU) := head.o
extra-$(CONFIG_SUN3) := sun3-head.o
extra-y += vmlinux.lds
obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \
sys_m68k.o syscalltable.o time.o traps.o
obj-$(CONFIG_MMU) += ints.o devres.o vectors.o
devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o
ifndef CONFIG_MMU_SUN3
obj-y += dma.o
endif
ifndef CONFIG_MMU
obj-y += init_task.o irq.o
endif
#
# Makefile for the linux kernel.
#
ifndef CONFIG_SUN3
extra-y := head.o
else
extra-y := sun3-head.o
endif
extra-y += vmlinux.lds
obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
sys_m68k.o time.o setup.o m68k_ksyms.o devres.o syscalltable.o
devres-y = ../../../kernel/irq/devres.o
obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo
#
# Makefile for arch/m68knommu/kernel.
#
extra-y := vmlinux.lds
obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \
setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
obj-$(CONFIG_MODULES) += module.o
......@@ -43,7 +43,7 @@
.globl sys_vfork
ENTRY(buserr)
SAVE_ALL
SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
......@@ -52,7 +52,7 @@ ENTRY(buserr)
jra ret_from_exception
ENTRY(trap)
SAVE_ALL
SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
......@@ -64,7 +64,7 @@ ENTRY(trap)
.globl dbginterrupt
ENTRY(dbginterrupt)
SAVE_ALL
SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
......
......@@ -36,6 +36,7 @@
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
unsigned long memory_start;
unsigned long memory_end;
......@@ -80,9 +81,6 @@ void (*mach_power_off)(void);
#define CPU_INSTR_PER_JIFFY 16
#endif
extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
#if defined(CONFIG_UBOOT)
/*
* parse_uboot_commandline
......
This diff is collapsed.
This diff is collapsed.
/*
* linux/arch/m68knommu/kernel/traps.c
*
* Copyright (C) 1993, 1994 by Hamish Macdonald
*
* 68040 fixes by Michael Rausch
* 68040 fixes by Martin Apel
* 68060 fixes by Roman Hodek
* 68060 fixes by Jesper Skov
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/*
* Sets up all exception vectors
*/
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/user.h>
#include <linux/string.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/kallsyms.h>
#include <asm/setup.h>
#include <asm/fpu.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/traps.h>
#include <asm/pgtable.h>
#include <asm/machdep.h>
#include <asm/siginfo.h>
static char const * const vec_names[] = {
"RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR",
"ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc",
"PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111",
"UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION",
"FORMAT ERROR", "UNINITIALIZED INTERRUPT",
"UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17",
"UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19",
"UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21",
"UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23",
"SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT",
"LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT",
"SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3",
"TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7",
"TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11",
"TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15",
"FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW",
"FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN",
"FPCP UNSUPPORTED OPERATION",
"MMU CONFIGURATION ERROR"
};
void die_if_kernel(char *str, struct pt_regs *fp, int nr)
{
if (!(fp->sr & PS_S))
return;
console_verbose();
printk(KERN_EMERG "%s: %08x\n",str,nr);
printk(KERN_EMERG "PC: [<%08lx>]\nSR: %04x SP: %p a2: %08lx\n",
fp->pc, fp->sr, fp, fp->a2);
printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
fp->d0, fp->d1, fp->d2, fp->d3);
printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
fp->d4, fp->d5, fp->a0, fp->a1);
printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n",
current->comm, current->pid, PAGE_SIZE+(unsigned long)current);
show_stack(NULL, (unsigned long *)(fp + 1));
add_taint(TAINT_DIE);
do_exit(SIGSEGV);
}
asmlinkage void buserr_c(struct frame *fp)
{
/* Only set esp0 if coming from user mode */
if (user_mode(&fp->ptregs))
current->thread.esp0 = (unsigned long) fp;
#if defined(DEBUG)
printk (KERN_DEBUG "*** Bus Error *** Format is %x\n", fp->ptregs.format);
#endif
die_if_kernel("bad frame format",&fp->ptregs,0);
#if defined(DEBUG)
printk(KERN_DEBUG "Unknown SIGSEGV - 4\n");
#endif
force_sig(SIGSEGV, current);
}
static void print_this_address(unsigned long addr, int i)
{
#ifdef CONFIG_KALLSYMS
printk(KERN_EMERG " [%08lx] ", addr);
print_symbol(KERN_CONT "%s\n", addr);
#else
if (i % 5)
printk(KERN_CONT " [%08lx] ", addr);
else
printk(KERN_EMERG " [%08lx] ", addr);
i++;
#endif
}
int kstack_depth_to_print = 48;
static void __show_stack(struct task_struct *task, unsigned long *stack)
{
unsigned long *endstack, addr;
#ifdef CONFIG_FRAME_POINTER
unsigned long *last_stack;
#endif
int i;
if (!stack)
stack = (unsigned long *)task->thread.ksp;
addr = (unsigned long) stack;
endstack = (unsigned long *) PAGE_ALIGN(addr);
printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
for (i = 0; i < kstack_depth_to_print; i++) {
if (stack + 1 + i > endstack)
break;
if (i % 8 == 0)
printk(KERN_EMERG " ");
printk(KERN_CONT " %08lx", *(stack + i));
}
printk("\n");
i = 0;
#ifdef CONFIG_FRAME_POINTER
printk(KERN_EMERG "Call Trace:\n");
last_stack = stack - 1;
while (stack <= endstack && stack > last_stack) {
addr = *(stack + 1);
print_this_address(addr, i);
i++;
last_stack = stack;
stack = (unsigned long *)*stack;
}
printk("\n");
#else
printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n");
while (stack <= endstack) {
addr = *stack++;
/*
* If the address is either in the text segment of the kernel,
* or in a region which is occupied by a module then it *may*
* be the address of a calling routine; if so, print it so that
* someone tracing down the cause of the crash will be able to
* figure out the call path that was taken.
*/
if (__kernel_text_address(addr)) {
print_this_address(addr, i);
i++;
}
}
printk(KERN_CONT "\n");
#endif
}
void bad_super_trap(struct frame *fp)
{
int vector = (fp->ptregs.vector >> 2) & 0xff;
console_verbose();
if (vector < ARRAY_SIZE(vec_names))
printk (KERN_WARNING "*** %s *** FORMAT=%X\n",
vec_names[vector],
fp->ptregs.format);
else
printk (KERN_WARNING "*** Exception %d *** FORMAT=%X\n",
vector,
fp->ptregs.format);
printk (KERN_WARNING "Current process id is %d\n", current->pid);
die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0);
}
asmlinkage void trap_c(struct frame *fp)
{
int sig;
int vector = (fp->ptregs.vector >> 2) & 0xff;
siginfo_t info;
if (fp->ptregs.sr & PS_S) {
if (vector == VEC_TRACE) {
/* traced a trapping instruction */
} else
bad_super_trap(fp);
return;
}
/* send the appropriate signal to the user program */
switch (vector) {
case VEC_ADDRERR:
info.si_code = BUS_ADRALN;
sig = SIGBUS;
break;
case VEC_ILLEGAL:
case VEC_LINE10:
case VEC_LINE11:
info.si_code = ILL_ILLOPC;
sig = SIGILL;
break;
case VEC_PRIV:
info.si_code = ILL_PRVOPC;
sig = SIGILL;
break;
case VEC_COPROC:
info.si_code = ILL_COPROC;
sig = SIGILL;
break;
case VEC_TRAP1: /* gdbserver breakpoint */
fp->ptregs.pc -= 2;
info.si_code = TRAP_TRACE;
sig = SIGTRAP;
break;
case VEC_TRAP2:
case VEC_TRAP3:
case VEC_TRAP4:
case VEC_TRAP5:
case VEC_TRAP6:
case VEC_TRAP7:
case VEC_TRAP8:
case VEC_TRAP9:
case VEC_TRAP10:
case VEC_TRAP11:
case VEC_TRAP12:
case VEC_TRAP13:
case VEC_TRAP14:
info.si_code = ILL_ILLTRP;
sig = SIGILL;
break;
case VEC_FPBRUC:
case VEC_FPOE:
case VEC_FPNAN:
info.si_code = FPE_FLTINV;
sig = SIGFPE;
break;
case VEC_FPIR:
info.si_code = FPE_FLTRES;
sig = SIGFPE;
break;
case VEC_FPDIVZ:
info.si_code = FPE_FLTDIV;
sig = SIGFPE;
break;
case VEC_FPUNDER:
info.si_code = FPE_FLTUND;
sig = SIGFPE;
break;
case VEC_FPOVER:
info.si_code = FPE_FLTOVF;
sig = SIGFPE;
break;
case VEC_ZERODIV:
info.si_code = FPE_INTDIV;
sig = SIGFPE;
break;
case VEC_CHK:
case VEC_TRAP:
info.si_code = FPE_INTOVF;
sig = SIGFPE;
break;
case VEC_TRACE: /* ptrace single step */
info.si_code = TRAP_TRACE;
sig = SIGTRAP;
break;
case VEC_TRAP15: /* breakpoint */
info.si_code = TRAP_BRKPT;
sig = SIGTRAP;
break;
default:
info.si_code = ILL_ILLOPC;
sig = SIGILL;
break;
}
info.si_signo = sig;
info.si_errno = 0;
switch (fp->ptregs.format) {
default:
info.si_addr = (void *) fp->ptregs.pc;
break;
case 2:
info.si_addr = (void *) fp->un.fmt2.iaddr;
break;
case 7:
info.si_addr = (void *) fp->un.fmt7.effaddr;
break;
case 9:
info.si_addr = (void *) fp->un.fmt9.iaddr;
break;
case 10:
info.si_addr = (void *) fp->un.fmta.daddr;
break;
case 11:
info.si_addr = (void *) fp->un.fmtb.daddr;
break;
}
force_sig_info (sig, &info, current);
}
asmlinkage void set_esp0(unsigned long ssp)
{
current->thread.esp0 = ssp;
}
/*
* The architecture-independent backtrace generator
*/
void dump_stack(void)
{
/*
* We need frame pointers for this little trick, which works as follows:
*
* +------------+ 0x00
* | Next SP | -> 0x0c
* +------------+ 0x04
* | Caller |
* +------------+ 0x08
* | Local vars | -> our stack var
* +------------+ 0x0c
* | Next SP | -> 0x18, that is what we pass to show_stack()
* +------------+ 0x10
* | Caller |
* +------------+ 0x14
* | Local vars |
* +------------+ 0x18
* | ... |
* +------------+
*/
unsigned long *stack;
stack = (unsigned long *)&stack;
stack++;
__show_stack(current, stack);
}
EXPORT_SYMBOL(dump_stack);
void show_stack(struct task_struct *task, unsigned long *stack)
{
if (!stack && !task)
dump_stack();
else
__show_stack(task, stack);
}
/*
* vectors.c
*
* Copyright (C) 1993, 1994 by Hamish Macdonald
*
* 68040 fixes by Michael Rausch
* 68040 fixes by Martin Apel
* 68040 fixes and writeback by Richard Zidlicky
* 68060 fixes by Roman Hodek
* 68060 fixes by Jesper Skov
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/*
* Sets up all exception vectors
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
#include <asm/setup.h>
#include <asm/fpu.h>
#include <asm/system.h>
#include <asm/traps.h>
/* assembler routines */
asmlinkage void system_call(void);
asmlinkage void buserr(void);
asmlinkage void trap(void);
asmlinkage void nmihandler(void);
#ifdef CONFIG_M68KFPU_EMU
asmlinkage void fpu_emu(void);
#endif
e_vector vectors[256];
/* nmi handler for the Amiga */
asm(".text\n"
__ALIGN_STR "\n"
"nmihandler: rte");
/*
* this must be called very early as the kernel might
* use some instruction that are emulated on the 060
* and so we're prepared for early probe attempts (e.g. nf_init).
*/
void __init base_trap_init(void)
{
if (MACH_IS_SUN3X) {
extern e_vector *sun3x_prom_vbr;
__asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr));
}
/* setup the exception vector table */
__asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
if (CPU_IS_060) {
/* set up ISP entry points */
asmlinkage void unimp_vec(void) asm ("_060_isp_unimp");
vectors[VEC_UNIMPII] = unimp_vec;
}
vectors[VEC_BUSERR] = buserr;
vectors[VEC_ILLEGAL] = trap;
vectors[VEC_SYS] = system_call;
}
void __init trap_init (void)
{
int i;
for (i = VEC_SPUR; i <= VEC_INT7; i++)
vectors[i] = bad_inthandler;
for (i = 0; i < VEC_USER; i++)
if (!vectors[i])
vectors[i] = trap;
for (i = VEC_USER; i < 256; i++)
vectors[i] = bad_inthandler;
#ifdef CONFIG_M68KFPU_EMU
if (FPU_IS_EMU)
vectors[VEC_LINE11] = fpu_emu;
#endif
if (CPU_IS_040 && !FPU_IS_EMU) {
/* set up FPSP entry points */
asmlinkage void dz_vec(void) asm ("dz");
asmlinkage void inex_vec(void) asm ("inex");
asmlinkage void ovfl_vec(void) asm ("ovfl");
asmlinkage void unfl_vec(void) asm ("unfl");
asmlinkage void snan_vec(void) asm ("snan");
asmlinkage void operr_vec(void) asm ("operr");
asmlinkage void bsun_vec(void) asm ("bsun");
asmlinkage void fline_vec(void) asm ("fline");
asmlinkage void unsupp_vec(void) asm ("unsupp");
vectors[VEC_FPDIVZ] = dz_vec;
vectors[VEC_FPIR] = inex_vec;
vectors[VEC_FPOVER] = ovfl_vec;
vectors[VEC_FPUNDER] = unfl_vec;
vectors[VEC_FPNAN] = snan_vec;
vectors[VEC_FPOE] = operr_vec;
vectors[VEC_FPBRUC] = bsun_vec;
vectors[VEC_LINE11] = fline_vec;
vectors[VEC_FPUNSUP] = unsupp_vec;
}
if (CPU_IS_060 && !FPU_IS_EMU) {
/* set up IFPSP entry points */
asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan");
asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr");
asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl");
asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl");
asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz");
asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex");
asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline");
asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp");
asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd");
vectors[VEC_FPNAN] = snan_vec6;
vectors[VEC_FPOE] = operr_vec6;
vectors[VEC_FPOVER] = ovfl_vec6;
vectors[VEC_FPUNDER] = unfl_vec6;
vectors[VEC_FPDIVZ] = dz_vec6;
vectors[VEC_FPIR] = inex_vec6;
vectors[VEC_LINE11] = fline_vec6;
vectors[VEC_FPUNSUP] = unsupp_vec6;
vectors[VEC_UNIMPEA] = effadd_vec6;
}
/* if running on an amiga, make the NMI interrupt do nothing */
if (MACH_IS_AMIGA) {
vectors[VEC_INT7] = nmihandler;
}
}
......@@ -22,6 +22,15 @@ void *memcpy(void *to, const void *from, size_t n)
from = cfrom;
n--;
}
#if defined(CONFIG_M68000)
if ((long)from & 1) {
char *cto = to;
const char *cfrom = from;
for (; n; n--)
*cto++ = *cfrom++;
return xto;
}
#endif
if (n > 2 && (long)to & 2) {
short *sto = to;
const short *sfrom = from;
......
......@@ -32,6 +32,7 @@
#include <linux/gfp.h>
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
......@@ -44,9 +45,6 @@
*/
void *empty_zero_page;
extern unsigned long memory_start;
extern unsigned long memory_end;
/*
* paging_init() continues the virtual memory environment setup which
* was begun by the code in arch/head.S.
......@@ -78,8 +76,6 @@ void __init mem_init(void)
{
int codek = 0, datak = 0, initk = 0;
unsigned long tmp;
extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
extern unsigned int _ramend, _rambase;
unsigned long len = _ramend - _rambase;
unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */
......@@ -95,9 +91,9 @@ void __init mem_init(void)
/* this will put all memory onto the freelists */
totalram_pages = free_all_bootmem();
codek = (&_etext - &_stext) >> 10;
datak = (&_ebss - &_sdata) >> 10;
initk = (&__init_begin - &__init_end) >> 10;
codek = (_etext - _stext) >> 10;
datak = (_ebss - _sdata) >> 10;
initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT;
printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n",
......@@ -129,22 +125,21 @@ void free_initmem(void)
{
#ifdef CONFIG_RAMKERNEL
unsigned long addr;
extern char __init_begin, __init_end;
/*
* The following code should be cool even if these sections
* are not page aligned.
*/
addr = PAGE_ALIGN((unsigned long)(&__init_begin));
addr = PAGE_ALIGN((unsigned long) __init_begin);
/* next to check that the page we free is not a partial page */
for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
for (; addr + PAGE_SIZE < ((unsigned long) __init_end); addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
free_page(addr);
totalram_pages++;
}
pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n",
(addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
(int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
(addr - PAGE_ALIGN((unsigned long) __init_begin)) >> 10,
(int)(PAGE_ALIGN((unsigned long) __init_begin)),
(int)(addr - PAGE_SIZE));
#endif
}
......
......@@ -91,9 +91,9 @@ static struct resource m520x_qspi_resources[] = {
},
};
#define MCFQSPI_CS0 62
#define MCFQSPI_CS1 63
#define MCFQSPI_CS2 44
#define MCFQSPI_CS0 46
#define MCFQSPI_CS1 47
#define MCFQSPI_CS2 27
static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
{
......
......@@ -36,42 +36,6 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.podr = (void __iomem *) MCFEPORT_EPDR,
.ppdr = (void __iomem *) MCFEPORT_EPPDR,
},
{
.gpio_chip = {
.label = "BUSCTL",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 8,
.ngpio = 4,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_BUSCTL,
.podr = (void __iomem *) MCFGPIO_PODR_BUSCTL,
.ppdr = (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
.setr = (void __iomem *) MCFGPIO_PPDSDR_BUSCTL,
.clrr = (void __iomem *) MCFGPIO_PCLRR_BUSCTL,
},
{
.gpio_chip = {
.label = "BE",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 16,
.ngpio = 4,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_BE,
.podr = (void __iomem *) MCFGPIO_PODR_BE,
.ppdr = (void __iomem *) MCFGPIO_PPDSDR_BE,
.setr = (void __iomem *) MCFGPIO_PPDSDR_BE,
.clrr = (void __iomem *) MCFGPIO_PCLRR_BE,
},
{
.gpio_chip = {
.label = "CS",
......@@ -81,7 +45,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 25,
.base = 9,
.ngpio = 3,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_CS,
......@@ -99,7 +63,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 32,
.base = 16,
.ngpio = 4,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_FECI2C,
......@@ -117,7 +81,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 40,
.base = 24,
.ngpio = 4,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_QSPI,
......@@ -135,7 +99,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 48,
.base = 32,
.ngpio = 4,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_TIMER,
......@@ -153,7 +117,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 56,
.base = 40,
.ngpio = 8,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_UART,
......@@ -171,7 +135,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 64,
.base = 48,
.ngpio = 8,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_FECH,
......@@ -189,7 +153,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = {
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 72,
.base = 56,
.ngpio = 8,
},
.pddr = (void __iomem *) MCFGPIO_PDDR_FECL,
......
......@@ -2,7 +2,10 @@
# Makefile for arch/m68knommu/platform/68328.
#
head-y = head-$(MODEL).o
model-y := ram
model-$(CONFIG_ROMKERNEL) := rom
head-y = head-$(model-y).o
head-$(CONFIG_PILOT) = head-pilot.o
head-$(CONFIG_DRAGEN2) = head-de2.o
......
......@@ -67,7 +67,7 @@ ret_from_signal:
jra ret_from_exception
ENTRY(system_call)
SAVE_ALL
SAVE_ALL_SYS
/* save top of frame*/
pea %sp@
......@@ -129,7 +129,7 @@ Lsignal_return:
* This is the main interrupt handler, responsible for calling process_int()
*/
inthandler1:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -140,7 +140,7 @@ inthandler1:
bra ret_from_interrupt
inthandler2:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -151,7 +151,7 @@ inthandler2:
bra ret_from_interrupt
inthandler3:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -162,7 +162,7 @@ inthandler3:
bra ret_from_interrupt
inthandler4:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -173,7 +173,7 @@ inthandler4:
bra ret_from_interrupt
inthandler5:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -184,7 +184,7 @@ inthandler5:
bra ret_from_interrupt
inthandler6:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -195,7 +195,7 @@ inthandler6:
bra ret_from_interrupt
inthandler7:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -206,7 +206,7 @@ inthandler7:
bra ret_from_interrupt
inthandler:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......
#
# Makefile for arch/m68knommu/platform/68360.
#
model-y := ram
model-$(CONFIG_ROMKERNEL) := rom
obj-y := config.o commproc.o entry.o ints.o
extra-y := head.o
$(obj)/head.o: $(obj)/head-$(MODEL).o
ln -sf head-$(MODEL).o $(obj)/head.o
$(obj)/head.o: $(obj)/head-$(model-y).o
ln -sf head-$(model-y).o $(obj)/head.o
......@@ -63,7 +63,7 @@ ret_from_signal:
jra ret_from_exception
ENTRY(system_call)
SAVE_ALL
SAVE_ALL_SYS
/* save top of frame*/
pea %sp@
......@@ -125,7 +125,7 @@ Lsignal_return:
* This is the main interrupt handler, responsible for calling do_IRQ()
*/
inthandler:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and.l #0x3ff, %d0
lsr.l #0x02, %d0
......
......@@ -61,7 +61,7 @@ enosys:
bra 1f
ENTRY(system_call)
SAVE_ALL
SAVE_ALL_SYS
move #0x2000,%sr /* enable intrs again */
cmpl #NR_syscalls,%d0
......@@ -165,9 +165,7 @@ Lsignal_return:
* sources). Calls up to high level code to do all the work.
*/
ENTRY(inthandler)
SAVE_ALL
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
andl #0x03fc,%d0 /* mask out vector only */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment