Commit 772b5235 authored by Rasesh Mody's avatar Rasesh Mody Committed by David S. Miller

bna: Naming Change and Minor Macro Fix

Naming changes: rename devid, BNAD_MAX_TXS, BNAD_MAX_RXS,
BNAD_MAX_RXPS_PER_RX to device, BNAD_MAX_TX, BNAD_MAX_RX,
BNAD_MAX_RXP_PER_RX respectively and change all the references.

Macro Fix: Add ioc_isr_mod_set check to bfa_nw_ioc_mbox_regisr macro
Signed-off-by: default avatarGurunatha Karaje <gkaraje@brocade.com>
Signed-off-by: default avatarRasesh Mody <rmody@brocade.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1bc144b6
......@@ -251,10 +251,10 @@ struct bfa_mfg_block {
* ---------------------- pci definitions ------------
*/
#define bfa_asic_id_ct(devid) \
((devid) == PCI_DEVICE_ID_BROCADE_CT || \
(devid) == PCI_DEVICE_ID_BROCADE_CT_FC)
#define bfa_asic_id_ctc(devid) (bfa_asic_id_ct(devid))
#define bfa_asic_id_ct(device) \
((device) == PCI_DEVICE_ID_BROCADE_CT || \
(device) == PCI_DEVICE_ID_BROCADE_CT_FC)
#define bfa_asic_id_ctc(device) (bfa_asic_id_ct(device))
enum bfa_mode {
BFA_MODE_HBA = 1,
......
......@@ -274,8 +274,10 @@ void bfa_nw_ioc_mbox_regisr(struct bfa_ioc *ioc, enum bfi_mclass mc,
((__ioc)->ioc_hwif->ioc_pll_init((__ioc)->pcidev.pci_bar_kva, \
(__ioc)->asic_mode))
#define bfa_ioc_isr_mode_set(__ioc, __msix) \
((__ioc)->ioc_hwif->ioc_isr_mode_set(__ioc, __msix))
#define bfa_ioc_isr_mode_set(__ioc, __msix) do { \
if ((__ioc)->ioc_hwif->ioc_isr_mode_set) \
((__ioc)->ioc_hwif->ioc_isr_mode_set(__ioc, __msix)); \
} while (0)
#define bfa_ioc_ownership_reset(__ioc) \
((__ioc)->ioc_hwif->ioc_ownership_reset(__ioc))
......
......@@ -1001,7 +1001,7 @@ bnad_cb_rx_cleanup(struct bnad *bnad, struct bna_rx *rx)
mdelay(BNAD_TXRX_SYNC_MDELAY);
for (i = 0; i < BNAD_MAX_RXPS_PER_RX; i++) {
for (i = 0; i < BNAD_MAX_RXP_PER_RX; i++) {
rx_ctrl = &rx_info->rx_ctrl[i];
ccb = rx_ctrl->ccb;
if (!ccb)
......@@ -1030,7 +1030,7 @@ bnad_cb_rx_post(struct bnad *bnad, struct bna_rx *rx)
int i;
int j;
for (i = 0; i < BNAD_MAX_RXPS_PER_RX; i++) {
for (i = 0; i < BNAD_MAX_RXP_PER_RX; i++) {
rx_ctrl = &rx_info->rx_ctrl[i];
ccb = rx_ctrl->ccb;
if (!ccb)
......@@ -2227,7 +2227,7 @@ bnad_q_num_init(struct bnad *bnad)
int rxps;
rxps = min((uint)num_online_cpus(),
(uint)(BNAD_MAX_RXS * BNAD_MAX_RXPS_PER_RX));
(uint)(BNAD_MAX_RX * BNAD_MAX_RXP_PER_RX));
if (!(bnad->cfg_flags & BNAD_CF_MSIX))
rxps = 1; /* INTx */
......
......@@ -38,12 +38,12 @@
#define BNAD_TXQ_DEPTH 2048
#define BNAD_RXQ_DEPTH 2048
#define BNAD_MAX_TXS 1
#define BNAD_MAX_TX 1
#define BNAD_MAX_TXQ_PER_TX 8 /* 8 priority queues */
#define BNAD_TXQ_NUM 1
#define BNAD_MAX_RXS 1
#define BNAD_MAX_RXPS_PER_RX 16
#define BNAD_MAX_RX 1
#define BNAD_MAX_RXP_PER_RX 16
#define BNAD_MAX_RXQ_PER_RXP 2
/*
......@@ -190,7 +190,7 @@ struct bnad_tx_info {
struct bnad_rx_info {
struct bna_rx *rx; /* 1:1 between rx_info & rx */
struct bnad_rx_ctrl rx_ctrl[BNAD_MAX_RXPS_PER_RX];
struct bnad_rx_ctrl rx_ctrl[BNAD_MAX_RXP_PER_RX];
u32 rx_id;
} ____cacheline_aligned;
......@@ -234,8 +234,8 @@ struct bnad {
struct net_device *netdev;
/* Data path */
struct bnad_tx_info tx_info[BNAD_MAX_TXS];
struct bnad_rx_info rx_info[BNAD_MAX_RXS];
struct bnad_tx_info tx_info[BNAD_MAX_TX];
struct bnad_rx_info rx_info[BNAD_MAX_RX];
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
/*
......@@ -255,8 +255,8 @@ struct bnad {
u8 tx_coalescing_timeo;
u8 rx_coalescing_timeo;
struct bna_rx_config rx_config[BNAD_MAX_RXS];
struct bna_tx_config tx_config[BNAD_MAX_TXS];
struct bna_rx_config rx_config[BNAD_MAX_RX];
struct bna_tx_config tx_config[BNAD_MAX_TX];
void __iomem *bar0; /* BAR0 address */
......@@ -283,8 +283,8 @@ struct bnad {
/* Control path resources, memory & irq */
struct bna_res_info res_info[BNA_RES_T_MAX];
struct bna_res_info mod_res_info[BNA_MOD_RES_T_MAX];
struct bnad_tx_res_info tx_res_info[BNAD_MAX_TXS];
struct bnad_rx_res_info rx_res_info[BNAD_MAX_RXS];
struct bnad_tx_res_info tx_res_info[BNAD_MAX_TX];
struct bnad_rx_res_info rx_res_info[BNAD_MAX_RX];
struct bnad_completion bnad_completions;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment