dt-bindings: phy: qcom,qmp-ufs: fix sc8280xp binding

The current QMP UFS PHY bindings are based on the original MSM8996 PCIe
PHY binding which provided multiple PHYs per IP block and these in turn
were described by child nodes.

The QMP UFS PHY block only provide a single PHY and the remnant child
node does not really reflect the hardware.

The original MSM8996 binding also ended up describing the individual
register blocks as belonging to either the wrapper node or the PHY child
nodes.

This is an unnecessary level of detail which has lead to problems when
later IP blocks using different register layouts have been forced to fit
the original mould rather than updating the binding. The bindings are
arguable also incomplete as they only the describe register blocks used
by the current Linux drivers.

Add a new binding for the UFS QMP PHYs found on SC8280XP which further
bindings can be based on.

Note that the current binding is simply removed instead of being
deprecated as it was only recently merged and support for SC8280XP is
still under development.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221024090041.19574-9-johan+linaro@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml

@@ -22,7 +22,6 @@ properties:
       - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,sc8180x-qmp-ufs-phy
-      - qcom,sc8280xp-qmp-ufs-phy
       - qcom,sdm845-qmp-ufs-phy
       - qcom,sm6115-qmp-ufs-phy
       - qcom,sm6350-qmp-ufs-phy
@@ -122,7 +121,6 @@ allOf:
             enum:
               - qcom,msm8998-qmp-ufs-phy
               - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6115-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
@@ -159,7 +157,6 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
               - qcom,sm8150-qmp-ufs-phy
@@ -214,11 +211,12 @@ allOf:
 
 examples:
   - |
-    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
+
     phy-wrapper@1d87000 {
-        compatible = "qcom,sc8280xp-qmp-ufs-phy";
-        reg = <0x01d87000 0xe10>;
+        compatible = "qcom,sm8250-qmp-ufs-phy";
+        reg = <0x01d87000 0x1c0>;
         #address-cells = <1>;
         #size-cells = <1>;
         ranges = <0x0 0x01d87000 0x1000>;

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,sc8280xp-qmp-ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (UFS, SC8280XP)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-qmp-ufs-phy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ref
+      - const: ref_aux
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: ufsphy
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+
+    ufs_mem_phy: phy@1d87000 {
+        compatible = "qcom,sc8280xp-qmp-ufs-phy";
+        reg = <0x01d87000 0x1000>;
+
+        clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+        clock-names = "ref", "ref_aux";
+
+        power-domains = <&gcc UFS_PHY_GDSC>;
+
+        resets = <&ufs_mem_hc 0>;
+        reset-names = "ufsphy";
+
+        vdda-phy-supply = <&vreg_l6b>;
+        vdda-pll-supply = <&vreg_l3b>;
+
+        #phy-cells = <0>;
+    };