mmc: omap-hsmmc: remove redundant null check

Because clk_disable_unprepare already checked NULL clock parameter, so the
additional checks are unnecessary, just remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200903084825.85616-1-vulab@iscas.ac.cnSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/omap_hsmmc.c

@@ -1114,8 +1114,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
 	int ret;
 
 	/* Disable the clocks */
-	if (host->dbclk)
-		clk_disable_unprepare(host->dbclk);
+	clk_disable_unprepare(host->dbclk);
 
 	/* Turn the power off */
 	ret = omap_hsmmc_set_power(host, 0);
@@ -1123,8 +1122,7 @@ static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
 	/* Turn the power ON with given VDD 1.8 or 3.0v */
 	if (!ret)
 		ret = omap_hsmmc_set_power(host, 1);
-	if (host->dbclk)
-		clk_prepare_enable(host->dbclk);
+	clk_prepare_enable(host->dbclk);
 
 	if (ret != 0)
 		goto err;
@@ -2014,8 +2012,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	pm_runtime_dont_use_autosuspend(host->dev);
 	pm_runtime_put_sync(host->dev);
 	pm_runtime_disable(host->dev);
-	if (host->dbclk)
-		clk_disable_unprepare(host->dbclk);
+	clk_disable_unprepare(host->dbclk);
 err1:
 	mmc_free_host(mmc);
 err:
@@ -2037,8 +2034,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(host->dev);
 	pm_runtime_disable(host->dev);
 	device_init_wakeup(&pdev->dev, false);
-	if (host->dbclk)
-		clk_disable_unprepare(host->dbclk);
+	clk_disable_unprepare(host->dbclk);
 
 	mmc_free_host(host->mmc);
 
@@ -2063,8 +2059,7 @@ static int omap_hsmmc_suspend(struct device *dev)
 				OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
 	}
 
-	if (host->dbclk)
-		clk_disable_unprepare(host->dbclk);
+	clk_disable_unprepare(host->dbclk);
 
 	pm_runtime_put_sync(host->dev);
 	return 0;
@@ -2080,8 +2075,7 @@ static int omap_hsmmc_resume(struct device *dev)
 
 	pm_runtime_get_sync(host->dev);
 
-	if (host->dbclk)
-		clk_prepare_enable(host->dbclk);
+	clk_prepare_enable(host->dbclk);
 
 	if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
 		omap_hsmmc_conf_bus_power(host);