Merge tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for 4.5-rc4
  that resolve some reported issues.

  One of them got reverted as it wasn't correct based on testing, and
  all have been in linux-next for a while"

* tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "8250: uniphier: allow modular build with 8250 console"
  pty: make sure super_block is still valid in final /dev/tty close
  pty: fix possible use after free of tty->driver_data
  tty: Add support for PCIe WCH382 2S multi-IO card
  serial/omap: mark wait_for_xmitr as __maybe_unused
  serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
  8250: uniphier: allow modular build with 8250 console
  tty: Drop krefs for interrupted tty lock

drivers/tty/pty.c

@@ -681,7 +681,14 @@ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
 /* this is called once with whichever end is closed last */
 static void pty_unix98_shutdown(struct tty_struct *tty)
 {
-	devpts_kill_index(tty->driver_data, tty->index);
+	struct inode *ptmx_inode;
+
+	if (tty->driver->subtype == PTY_TYPE_MASTER)
+		ptmx_inode = tty->driver_data;
+	else
+		ptmx_inode = tty->link->driver_data;
+	devpts_kill_index(ptmx_inode, tty->index);
+	devpts_del_ref(ptmx_inode);
 }
 
 static const struct tty_operations ptm_unix98_ops = {
@@ -773,6 +780,18 @@ static int ptmx_open(struct inode *inode, struct file *filp)
 	set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
 	tty->driver_data = inode;
 
+	/*
+	 * In the case where all references to ptmx inode are dropped and we
+	 * still have /dev/tty opened pointing to the master/slave pair (ptmx
+	 * is closed/released before /dev/tty), we must make sure that the inode
+	 * is still valid when we call the final pty_unix98_shutdown, thus we
+	 * hold an additional reference to the ptmx inode. For the same /dev/tty
+	 * last close case, we also need to make sure the super_block isn't
+	 * destroyed (devpts instance unmounted), before /dev/tty is closed and
+	 * on its release devpts_kill_index is called.
+	 */
+	devpts_add_ref(inode);
+
 	tty_add_file(tty, filp);
 
 	slave_inode = devpts_pty_new(inode,

drivers/tty/serial/8250/8250_pci.c

@@ -1941,6 +1941,7 @@ pci_wch_ch38x_setup(struct serial_private *priv,
 #define PCIE_VENDOR_ID_WCH		0x1c00
 #define PCIE_DEVICE_ID_WCH_CH382_2S1P	0x3250
 #define PCIE_DEVICE_ID_WCH_CH384_4S	0x3470
+#define PCIE_DEVICE_ID_WCH_CH382_2S	0x3253
 
 #define PCI_VENDOR_ID_PERICOM			0x12D8
 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951	0x7951
@@ -2637,6 +2638,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_wch_ch353_setup,
 	},
+	/* WCH CH382 2S card (16850 clone) */
+	{
+		.vendor         = PCIE_VENDOR_ID_WCH,
+		.device         = PCIE_DEVICE_ID_WCH_CH382_2S,
+		.subvendor      = PCI_ANY_ID,
+		.subdevice      = PCI_ANY_ID,
+		.setup          = pci_wch_ch38x_setup,
+	},
 	/* WCH CH382 2S1P card (16850 clone) */
 	{
 		.vendor         = PCIE_VENDOR_ID_WCH,
@@ -2955,6 +2964,7 @@ enum pci_board_num_t {
 	pbn_fintek_4,
 	pbn_fintek_8,
 	pbn_fintek_12,
+	pbn_wch382_2,
 	pbn_wch384_4,
 	pbn_pericom_PI7C9X7951,
 	pbn_pericom_PI7C9X7952,
@@ -3775,6 +3785,13 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 115200,
 		.first_offset	= 0x40,
 	},
+	[pbn_wch382_2] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 2,
+		.base_baud	= 115200,
+		.uart_offset	= 8,
+		.first_offset	= 0xC0,
+	},
 	[pbn_wch384_4] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,
@@ -5574,6 +5591,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_wch382_2 },
+
 	{	PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_wch384_4 },

drivers/tty/serial/omap-serial.c

@@ -1165,7 +1165,7 @@ serial_omap_type(struct uart_port *port)
 
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
-static void wait_for_xmitr(struct uart_omap_port *up)
+static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up)
 {
 	unsigned int status, tmout = 10000;
 
@@ -1343,7 +1343,7 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up)
 
 /* Enable or disable the rs485 support */
 static int
-serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
+serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
 {
 	struct uart_omap_port *up = to_uart_omap_port(port);
 	unsigned int mode;
@@ -1356,8 +1356,12 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 	up->ier = 0;
 	serial_out(up, UART_IER, 0);
 
+	/* Clamp the delays to [0, 100ms] */
+	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+	rs485->delay_rts_after_send  = min(rs485->delay_rts_after_send, 100U);
+
 	/* store new config */
-	port->rs485 = *rs485conf;
+	port->rs485 = *rs485;
 
 	/*
 	 * Just as a precaution, only allow rs485

drivers/tty/tty_io.c

@@ -2066,13 +2066,12 @@ static int tty_open(struct inode *inode, struct file *filp)
 		if (tty) {
 			mutex_unlock(&tty_mutex);
 			retval = tty_lock_interruptible(tty);
+			tty_kref_put(tty);  /* drop kref from tty_driver_lookup_tty() */
 			if (retval) {
 				if (retval == -EINTR)
 					retval = -ERESTARTSYS;
 				goto err_unref;
 			}
-			/* safe to drop the kref from tty_driver_lookup_tty() */
-			tty_kref_put(tty);
 			retval = tty_reopen(tty);
 			if (retval < 0) {
 				tty_unlock(tty);

drivers/tty/tty_mutex.c

@@ -21,10 +21,15 @@ EXPORT_SYMBOL(tty_lock);
 
 int tty_lock_interruptible(struct tty_struct *tty)
 {
+	int ret;
+
 	if (WARN(tty->magic != TTY_MAGIC, "L Bad %p\n", tty))
 		return -EIO;
 	tty_kref_get(tty);
-	return mutex_lock_interruptible(&tty->legacy_mutex);
+	ret = mutex_lock_interruptible(&tty->legacy_mutex);
+	if (ret)
+		tty_kref_put(tty);
+	return ret;
 }
 
 void __lockfunc tty_unlock(struct tty_struct *tty)

fs/devpts/inode.c

@@ -575,6 +575,26 @@ void devpts_kill_index(struct inode *ptmx_inode, int idx)
 	mutex_unlock(&allocated_ptys_lock);
 }
 
+/*
+ * pty code needs to hold extra references in case of last /dev/tty close
+ */
+
+void devpts_add_ref(struct inode *ptmx_inode)
+{
+	struct super_block *sb = pts_sb_from_inode(ptmx_inode);
+
+	atomic_inc(&sb->s_active);
+	ihold(ptmx_inode);
+}
+
+void devpts_del_ref(struct inode *ptmx_inode)
+{
+	struct super_block *sb = pts_sb_from_inode(ptmx_inode);
+
+	iput(ptmx_inode);
+	deactivate_super(sb);
+}
+
 /**
  * devpts_pty_new -- create a new inode in /dev/pts/
  * @ptmx_inode: inode of the master

include/linux/devpts_fs.h

@@ -19,6 +19,8 @@
 
 int devpts_new_index(struct inode *ptmx_inode);
 void devpts_kill_index(struct inode *ptmx_inode, int idx);
+void devpts_add_ref(struct inode *ptmx_inode);
+void devpts_del_ref(struct inode *ptmx_inode);
 /* mknod in devpts */
 struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index,
 		void *priv);
@@ -32,6 +34,8 @@ void devpts_pty_kill(struct inode *inode);
 /* Dummy stubs in the no-pty case */
 static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; }
 static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { }
+static inline void devpts_add_ref(struct inode *ptmx_inode) { }
+static inline void devpts_del_ref(struct inode *ptmx_inode) { }
 static inline struct inode *devpts_pty_new(struct inode *ptmx_inode,
 		dev_t device, int index, void *priv)
 {