x86: remove the IOMMU table infrastructure

The IOMMU table tries to separate the different IOMMUs into different
backends, but actually requires various cross calls.

Rewrite the code to do the generic swiotlb/swiotlb-xen setup directly
in pci-dma.c and then just call into the IOMMU drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

arch/ia64/include/asm/iommu_table.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_IA64_IOMMU_TABLE_H
-#define _ASM_IA64_IOMMU_TABLE_H
-
-#define IOMMU_INIT_POST(_detect)
-
-#endif /* _ASM_IA64_IOMMU_TABLE_H */

arch/x86/include/asm/dma-mapping.h

@@ -9,7 +9,6 @@
 
 #include <linux/scatterlist.h>
 #include <asm/io.h>
-#include <asm/swiotlb.h>
 
 extern int iommu_merge;
 extern int panic_on_overflow;

arch/x86/include/asm/gart.h

@@ -38,7 +38,7 @@ extern int gart_iommu_aperture_disabled;
 extern void early_gart_iommu_check(void);
 extern int gart_iommu_init(void);
 extern void __init gart_parse_options(char *);
-extern int gart_iommu_hole_init(void);
+void gart_iommu_hole_init(void);
 
 #else
 #define gart_iommu_aperture            0
@@ -51,9 +51,8 @@ static inline void early_gart_iommu_check(void)
 static inline void gart_parse_options(char *options)
 {
 }
-static inline int gart_iommu_hole_init(void)
+static inline void gart_iommu_hole_init(void)
 {
-	return -ENODEV;
 }
 #endif
 

arch/x86/include/asm/iommu.h

@@ -9,6 +9,12 @@
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
 
+#ifdef CONFIG_SWIOTLB
+extern bool x86_swiotlb_enable;
+#else
+#define x86_swiotlb_enable false
+#endif
+
 /* 10 seconds */
 #define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000)
 

arch/x86/include/asm/iommu_table.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_IOMMU_TABLE_H
-#define _ASM_X86_IOMMU_TABLE_H
-
-#include <asm/swiotlb.h>
-
-/*
- * History lesson:
- * The execution chain of IOMMUs in 2.6.36 looks as so:
- *
- *            [xen-swiotlb]
- *                 |
- *         +----[swiotlb *]--+
- *        /         |         \
- *       /          |          \
- *    [GART]     [Calgary]  [Intel VT-d]
- *     /
- *    /
- * [AMD-Vi]
- *
- * *: if SWIOTLB detected 'iommu=soft'/'swiotlb=force' it would skip
- * over the rest of IOMMUs and unconditionally initialize the SWIOTLB.
- * Also it would surreptitiously initialize set the swiotlb=1 if there were
- * more than 4GB and if the user did not pass in 'iommu=off'. The swiotlb
- * flag would be turned off by all IOMMUs except the Calgary one.
- *
- * The IOMMU_INIT* macros allow a similar tree (or more complex if desired)
- * to be built by defining who we depend on.
- *
- * And all that needs to be done is to use one of the macros in the IOMMU
- * and the pci-dma.c will take care of the rest.
- */
-
-struct iommu_table_entry {
-	initcall_t	detect;
-	initcall_t	depend;
-	void		(*early_init)(void); /* No memory allocate available. */
-	void		(*late_init)(void); /* Yes, can allocate memory. */
-#define IOMMU_FINISH_IF_DETECTED (1<<0)
-#define IOMMU_DETECTED		 (1<<1)
-	int		flags;
-};
-/*
- * Macro fills out an entry in the .iommu_table that is equivalent
- * to the fields that 'struct iommu_table_entry' has. The entries
- * that are put in the .iommu_table section are not put in any order
- * hence during boot-time we will have to resort them based on
- * dependency. */
-
-
-#define __IOMMU_INIT(_detect, _depend, _early_init, _late_init, _finish)\
-	static const struct iommu_table_entry				\
-		__iommu_entry_##_detect __used				\
-	__attribute__ ((unused, __section__(".iommu_table"),		\
-			aligned((sizeof(void *)))))	\
-	= {_detect, _depend, _early_init, _late_init,			\
-	   _finish ? IOMMU_FINISH_IF_DETECTED : 0}
-/*
- * The simplest IOMMU definition. Provide the detection routine
- * and it will be run after the SWIOTLB and the other IOMMUs
- * that utilize this macro. If the IOMMU is detected (ie, the
- * detect routine returns a positive value), the other IOMMUs
- * are also checked. You can use IOMMU_INIT_POST_FINISH if you prefer
- * to stop detecting the other IOMMUs after yours has been detected.
- */
-#define IOMMU_INIT_POST(_detect)					\
-	__IOMMU_INIT(_detect, pci_swiotlb_detect_4gb,  NULL, NULL, 0)
-
-#define IOMMU_INIT_POST_FINISH(detect)					\
-	__IOMMU_INIT(_detect, pci_swiotlb_detect_4gb,  NULL, NULL, 1)
-
-/*
- * A more sophisticated version of IOMMU_INIT. This variant requires:
- *  a). A detection routine function.
- *  b). The name of the detection routine we depend on to get called
- *      before us.
- *  c). The init routine which gets called if the detection routine
- *      returns a positive value from the pci_iommu_alloc. This means
- *      no presence of a memory allocator.
- *  d). Similar to the 'init', except that this gets called from pci_iommu_init
- *      where we do have a memory allocator.
- *
- * The standard IOMMU_INIT differs from the IOMMU_INIT_FINISH variant
- * in that the former will continue detecting other IOMMUs in the call
- * list after the detection routine returns a positive number, while the
- * latter will stop the execution chain upon first successful detection.
- * Both variants will still call the 'init' and 'late_init' functions if
- * they are set.
- */
-#define IOMMU_INIT_FINISH(_detect, _depend, _init, _late_init)		\
-	__IOMMU_INIT(_detect, _depend, _init, _late_init, 1)
-
-#define IOMMU_INIT(_detect, _depend, _init, _late_init)			\
-	__IOMMU_INIT(_detect, _depend, _init, _late_init, 0)
-
-void sort_iommu_table(struct iommu_table_entry *start,
-		      struct iommu_table_entry *finish);
-
-void check_iommu_entries(struct iommu_table_entry *start,
-			 struct iommu_table_entry *finish);
-
-#endif /* _ASM_X86_IOMMU_TABLE_H */

arch/x86/include/asm/swiotlb.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_SWIOTLB_H
-#define _ASM_X86_SWIOTLB_H
-
-#include <linux/swiotlb.h>
-
-#ifdef CONFIG_SWIOTLB
-extern int swiotlb;
-extern int __init pci_swiotlb_detect_override(void);
-extern int __init pci_swiotlb_detect_4gb(void);
-extern void __init pci_swiotlb_init(void);
-extern void __init pci_swiotlb_late_init(void);
-#else
-#define swiotlb 0
-static inline int pci_swiotlb_detect_override(void)
-{
-	return 0;
-}
-static inline int pci_swiotlb_detect_4gb(void)
-{
-	return 0;
-}
-static inline void pci_swiotlb_init(void)
-{
-}
-static inline void pci_swiotlb_late_init(void)
-{
-}
-#endif
-#endif /* _ASM_X86_SWIOTLB_H */

arch/x86/include/asm/xen/swiotlb-xen.h

@@ -3,10 +3,8 @@
 #define _ASM_X86_SWIOTLB_XEN_H
 
 #ifdef CONFIG_SWIOTLB_XEN
-extern int __init pci_xen_swiotlb_detect(void);
 extern int pci_xen_swiotlb_init_late(void);
 #else
-#define pci_xen_swiotlb_detect NULL
 static inline int pci_xen_swiotlb_init_late(void) { return -ENXIO; }
 #endif
 

arch/x86/kernel/Makefile

@@ -68,7 +68,6 @@ obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o topology.o kdebugfs.o
 obj-y			+= alternative.o i8253.o hw_breakpoint.o
 obj-y			+= tsc.o tsc_msr.o io_delay.o rtc.o
-obj-y			+= pci-iommu_table.o
 obj-y			+= resource.o
 obj-y			+= irqflags.o
 obj-y			+= static_call.o
@@ -134,7 +133,6 @@ obj-$(CONFIG_PCSPKR_PLATFORM)	+= pcspeaker.o
 
 obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
 
-obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb.o
 obj-$(CONFIG_OF)			+= devicetree.o
 obj-$(CONFIG_UPROBES)			+= uprobes.o
 

arch/x86/kernel/amd_gart_64.c

@@ -38,11 +38,9 @@
 #include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/set_memory.h>
-#include <asm/swiotlb.h>
 #include <asm/dma.h>
 #include <asm/amd_nb.h>
 #include <asm/x86_init.h>
-#include <asm/iommu_table.h>
 
 static unsigned long iommu_bus_base;	/* GART remapping area (physical) */
 static unsigned long iommu_size;	/* size of remapping area bytes */
@@ -808,7 +806,7 @@ int __init gart_iommu_init(void)
 	flush_gart();
 	dma_ops = &gart_dma_ops;
 	x86_platform.iommu_shutdown = gart_iommu_shutdown;
-	swiotlb = 0;
+	x86_swiotlb_enable = false;
 
 	return 0;
 }
@@ -842,4 +840,3 @@ void __init gart_parse_options(char *p)
 		}
 	}
 }
-IOMMU_INIT_POST(gart_iommu_hole_init);

arch/x86/kernel/aperture_64.c

@@ -392,7 +392,7 @@ void __init early_gart_iommu_check(void)
 
 static int __initdata printed_gart_size_msg;
 
-int __init gart_iommu_hole_init(void)
+void __init gart_iommu_hole_init(void)
 {
 	u32 agp_aper_base = 0, agp_aper_order = 0;
 	u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
@@ -401,11 +401,11 @@ int __init gart_iommu_hole_init(void)
 	int i, node;
 
 	if (!amd_gart_present())
-		return -ENODEV;
+		return;
 
 	if (gart_iommu_aperture_disabled || !fix_aperture ||
 	    !early_pci_allowed())
-		return -ENODEV;
+		return;
 
 	pr_info("Checking aperture...\n");
 
@@ -491,10 +491,8 @@ int __init gart_iommu_hole_init(void)
 			 * and fixed up the northbridge
 			 */
 			exclude_from_core(last_aper_base, last_aper_order);
-
-			return 1;
 		}
-		return 0;
+		return;
 	}
 
 	if (!fallback_aper_force) {
@@ -527,7 +525,7 @@ int __init gart_iommu_hole_init(void)
 			panic("Not enough memory for aperture");
 		}
 	} else {
-		return 0;
+		return;
 	}
 
 	/*
@@ -561,6 +559,4 @@ int __init gart_iommu_hole_init(void)
 	}
 
 	set_up_gart_resume(aper_order, aper_alloc);
-
-	return 1;
 }

arch/x86/kernel/pci-dma.c

@@ -7,13 +7,16 @@
 #include <linux/memblock.h>
 #include <linux/gfp.h>
 #include <linux/pci.h>
+#include <linux/amd-iommu.h>
 
 #include <asm/proto.h>
 #include <asm/dma.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/x86_init.h>
-#include <asm/iommu_table.h>
+
+#include <xen/xen.h>
+#include <xen/swiotlb-xen.h>
 
 static bool disable_dac_quirk __read_mostly;
 
@@ -34,24 +37,83 @@ int no_iommu __read_mostly;
 /* Set this to 1 if there is a HW IOMMU in the system */
 int iommu_detected __read_mostly = 0;
 
-extern struct iommu_table_entry __iommu_table[], __iommu_table_end[];
+#ifdef CONFIG_SWIOTLB
+bool x86_swiotlb_enable;
+
+static void __init pci_swiotlb_detect(void)
+{
+	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
+	if (!no_iommu && max_possible_pfn > MAX_DMA32_PFN)
+		x86_swiotlb_enable = true;
+
+	/*
+	 * Set swiotlb to 1 so that bounce buffers are allocated and used for
+	 * devices that can't support DMA to encrypted memory.
+	 */
+	if (cc_platform_has(CC_ATTR_HOST_MEM_ENCRYPT))
+		x86_swiotlb_enable = true;
+
+	if (swiotlb_force == SWIOTLB_FORCE)
+		x86_swiotlb_enable = true;
+}
+#else
+static inline void __init pci_swiotlb_detect(void)
+{
+}
+#endif /* CONFIG_SWIOTLB */
+
+#ifdef CONFIG_SWIOTLB_XEN
+static bool xen_swiotlb;
+
+static void __init pci_xen_swiotlb_init(void)
+{
+	if (!xen_initial_domain() && !x86_swiotlb_enable &&
+	    swiotlb_force != SWIOTLB_FORCE)
+		return;
+	x86_swiotlb_enable = true;
+	xen_swiotlb = true;
+	xen_swiotlb_init_early();
+	dma_ops = &xen_swiotlb_dma_ops;
+	if (IS_ENABLED(CONFIG_PCI))
+		pci_request_acs();
+}
+
+int pci_xen_swiotlb_init_late(void)
+{
+	int rc;
+
+	if (xen_swiotlb)
+		return 0;
+
+	rc = xen_swiotlb_init();
+	if (rc)
+		return rc;
+
+	/* XXX: this switches the dma ops under live devices! */
+	dma_ops = &xen_swiotlb_dma_ops;
+	if (IS_ENABLED(CONFIG_PCI))
+		pci_request_acs();
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_xen_swiotlb_init_late);
+#else
+static inline void __init pci_xen_swiotlb_init(void)
+{
+}
+#endif /* CONFIG_SWIOTLB_XEN */
 
 void __init pci_iommu_alloc(void)
 {
-	struct iommu_table_entry *p;
-
-	sort_iommu_table(__iommu_table, __iommu_table_end);
-	check_iommu_entries(__iommu_table, __iommu_table_end);
-
-	for (p = __iommu_table; p < __iommu_table_end; p++) {
-		if (p && p->detect && p->detect() > 0) {
-			p->flags |= IOMMU_DETECTED;
-			if (p->early_init)
-				p->early_init();
-			if (p->flags & IOMMU_FINISH_IF_DETECTED)
-				break;
-		}
+	if (xen_pv_domain()) {
+		pci_xen_swiotlb_init();
+		return;
 	}
+	pci_swiotlb_detect();
+	gart_iommu_hole_init();
+	amd_iommu_detect();
+	detect_intel_iommu();
+	if (x86_swiotlb_enable)
+		swiotlb_init(0);
 }
 
 /*
@@ -102,7 +164,7 @@ static __init int iommu_setup(char *p)
 		}
 #ifdef CONFIG_SWIOTLB
 		if (!strncmp(p, "soft", 4))
-			swiotlb = 1;
+			x86_swiotlb_enable = true;
 #endif
 		if (!strncmp(p, "pt", 2))
 			iommu_set_default_passthrough(true);
@@ -121,14 +183,17 @@ early_param("iommu", iommu_setup);
 
 static int __init pci_iommu_init(void)
 {
-	struct iommu_table_entry *p;
-
 	x86_init.iommu.iommu_init();
 
-	for (p = __iommu_table; p < __iommu_table_end; p++) {
-		if (p && (p->flags & IOMMU_DETECTED) && p->late_init)
-			p->late_init();
+#ifdef CONFIG_SWIOTLB
+	/* An IOMMU turned us off. */
+	if (x86_swiotlb_enable) {
+		pr_info("PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n");
+		swiotlb_print_info();
+	} else {
+		swiotlb_exit();
 	}
+#endif
 
 	return 0;
 }

arch/x86/kernel/pci-iommu_table.c

-// SPDX-License-Identifier: GPL-2.0
-#include <linux/dma-mapping.h>
-#include <asm/iommu_table.h>
-#include <linux/string.h>
-#include <linux/kallsyms.h>
-
-static struct iommu_table_entry * __init
-find_dependents_of(struct iommu_table_entry *start,
-		   struct iommu_table_entry *finish,
-		   struct iommu_table_entry *q)
-{
-	struct iommu_table_entry *p;
-
-	if (!q)
-		return NULL;
-
-	for (p = start; p < finish; p++)
-		if (p->detect == q->depend)
-			return p;
-
-	return NULL;
-}
-
-
-void __init sort_iommu_table(struct iommu_table_entry *start,
-			     struct iommu_table_entry *finish) {
-
-	struct iommu_table_entry *p, *q, tmp;
-
-	for (p = start; p < finish; p++) {
-again:
-		q = find_dependents_of(start, finish, p);
-		/* We are bit sneaky here. We use the memory address to figure
-		 * out if the node we depend on is past our point, if so, swap.
-		 */
-		if (q > p) {
-			tmp = *p;
-			memmove(p, q, sizeof(*p));
-			*q = tmp;
-			goto again;
-		}
-	}
-
-}
-
-#ifdef DEBUG
-void __init check_iommu_entries(struct iommu_table_entry *start,
-				struct iommu_table_entry *finish)
-{
-	struct iommu_table_entry *p, *q, *x;
-
-	/* Simple cyclic dependency checker. */
-	for (p = start; p < finish; p++) {
-		q = find_dependents_of(start, finish, p);
-		x = find_dependents_of(start, finish, q);
-		if (p == x) {
-			printk(KERN_ERR "CYCLIC DEPENDENCY FOUND! %pS depends on %pS and vice-versa. BREAKING IT.\n",
-			       p->detect, q->detect);
-			/* Heavy handed way..*/
-			x->depend = NULL;
-		}
-	}
-
-	for (p = start; p < finish; p++) {
-		q = find_dependents_of(p, finish, p);
-		if (q && q > p) {
-			printk(KERN_ERR "EXECUTION ORDER INVALID! %pS should be called before %pS!\n",
-			       p->detect, q->detect);
-		}
-	}
-}
-#else
-void __init check_iommu_entries(struct iommu_table_entry *start,
-				       struct iommu_table_entry *finish)
-{
-}
-#endif

arch/x86/kernel/pci-swiotlb.c

-// SPDX-License-Identifier: GPL-2.0
-
-#include <linux/pci.h>
-#include <linux/cache.h>
-#include <linux/init.h>
-#include <linux/swiotlb.h>
-#include <linux/memblock.h>
-#include <linux/dma-direct.h>
-#include <linux/cc_platform.h>
-
-#include <asm/iommu.h>
-#include <asm/swiotlb.h>
-#include <asm/dma.h>
-#include <asm/xen/swiotlb-xen.h>
-#include <asm/iommu_table.h>
-
-int swiotlb __read_mostly;
-
-/*
- * pci_swiotlb_detect_override - set swiotlb to 1 if necessary
- *
- * This returns non-zero if we are forced to use swiotlb (by the boot
- * option).
- */
-int __init pci_swiotlb_detect_override(void)
-{
-	if (swiotlb_force == SWIOTLB_FORCE)
-		swiotlb = 1;
-
-	return swiotlb;
-}
-IOMMU_INIT_FINISH(pci_swiotlb_detect_override,
-		  pci_xen_swiotlb_detect,
-		  pci_swiotlb_init,
-		  pci_swiotlb_late_init);
-
-/*
- * If 4GB or more detected (and iommu=off not set) or if SME is active
- * then set swiotlb to 1 and return 1.
- */
-int __init pci_swiotlb_detect_4gb(void)
-{
-	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
-	if (!no_iommu && max_possible_pfn > MAX_DMA32_PFN)
-		swiotlb = 1;
-
-	/*
-	 * Set swiotlb to 1 so that bounce buffers are allocated and used for
-	 * devices that can't support DMA to encrypted memory.
-	 */
-	if (cc_platform_has(CC_ATTR_HOST_MEM_ENCRYPT))
-		swiotlb = 1;
-
-	return swiotlb;
-}
-IOMMU_INIT(pci_swiotlb_detect_4gb,
-	   pci_swiotlb_detect_override,
-	   pci_swiotlb_init,
-	   pci_swiotlb_late_init);
-
-void __init pci_swiotlb_init(void)
-{
-	if (swiotlb)
-		swiotlb_init(0);
-}
-
-void __init pci_swiotlb_late_init(void)
-{
-	/* An IOMMU turned us off. */
-	if (!swiotlb)
-		swiotlb_exit();
-	else {
-		printk(KERN_INFO "PCI-DMA: "
-		       "Using software bounce buffering for IO (SWIOTLB)\n");
-		swiotlb_print_info();
-	}
-}

arch/x86/kernel/tboot.c

@@ -24,7 +24,6 @@
 #include <asm/processor.h>
 #include <asm/bootparam.h>
 #include <asm/pgalloc.h>
-#include <asm/swiotlb.h>
 #include <asm/fixmap.h>
 #include <asm/proto.h>
 #include <asm/setup.h>

arch/x86/kernel/vmlinux.lds.S

@@ -315,18 +315,6 @@ SECTIONS
 		*(.altinstr_replacement)
 	}
 
-	/*
-	 * struct iommu_table_entry entries are injected in this section.
-	 * It is an array of IOMMUs which during run time gets sorted depending
-	 * on its dependency order. After rootfs_initcall is complete
-	 * this section can be safely removed.
-	 */
-	.iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
-		__iommu_table = .;
-		*(.iommu_table)
-		__iommu_table_end = .;
-	}
-
 	. = ALIGN(8);
 	.apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
 		__apicdrivers = .;

arch/x86/xen/Makefile

@@ -47,6 +47,4 @@ obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
 
 obj-$(CONFIG_XEN_PV_DOM0)	+= vga.o
 
-obj-$(CONFIG_SWIOTLB_XEN)	+= pci-swiotlb-xen.o
-
 obj-$(CONFIG_XEN_EFI)		+= efi.o

arch/x86/xen/pci-swiotlb-xen.c

-// SPDX-License-Identifier: GPL-2.0
-
-/* Glue code to lib/swiotlb-xen.c */
-
-#include <linux/dma-map-ops.h>
-#include <linux/pci.h>
-#include <xen/swiotlb-xen.h>
-
-#include <asm/xen/hypervisor.h>
-#include <xen/xen.h>
-#include <asm/iommu_table.h>
-
-
-#include <asm/xen/swiotlb-xen.h>
-#ifdef CONFIG_X86_64
-#include <asm/iommu.h>
-#include <asm/dma.h>
-#endif
-#include <linux/export.h>
-
-static int xen_swiotlb __read_mostly;
-
-/*
- * pci_xen_swiotlb_detect - set xen_swiotlb to 1 if necessary
- *
- * This returns non-zero if we are forced to use xen_swiotlb (by the boot
- * option).
- */
-int __init pci_xen_swiotlb_detect(void)
-{
-
-	if (!xen_pv_domain())
-		return 0;
-
-	/* If running as PV guest, either iommu=soft, or swiotlb=force will
-	 * activate this IOMMU. If running as PV privileged, activate it
-	 * irregardless.
-	 */
-	if (xen_initial_domain() || swiotlb || swiotlb_force == SWIOTLB_FORCE)
-		xen_swiotlb = 1;
-
-	/* If we are running under Xen, we MUST disable the native SWIOTLB.
-	 * Don't worry about swiotlb_force flag activating the native, as
-	 * the 'swiotlb' flag is the only one turning it on. */
-	swiotlb = 0;
-
-#ifdef CONFIG_X86_64
-	/* pci_swiotlb_detect_4gb turns on native SWIOTLB if no_iommu == 0
-	 * (so no iommu=X command line over-writes).
-	 * Considering that PV guests do not want the *native SWIOTLB* but
-	 * only Xen SWIOTLB it is not useful to us so set no_iommu=1 here.
-	 */
-	if (max_pfn > MAX_DMA32_PFN)
-		no_iommu = 1;
-#endif
-	return xen_swiotlb;
-}
-
-static void __init pci_xen_swiotlb_init(void)
-{
-	if (xen_swiotlb) {
-		xen_swiotlb_init_early();
-		dma_ops = &xen_swiotlb_dma_ops;
-
-#ifdef CONFIG_PCI
-		/* Make sure ACS will be enabled */
-		pci_request_acs();
-#endif
-	}
-}
-
-int pci_xen_swiotlb_init_late(void)
-{
-	int rc;
-
-	if (xen_swiotlb)
-		return 0;
-
-	rc = xen_swiotlb_init();
-	if (rc)
-		return rc;
-
-	dma_ops = &xen_swiotlb_dma_ops;
-#ifdef CONFIG_PCI
-	/* Make sure ACS will be enabled */
-	pci_request_acs();
-#endif
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(pci_xen_swiotlb_init_late);
-
-IOMMU_INIT_FINISH(pci_xen_swiotlb_detect,
-		  NULL,
-		  pci_xen_swiotlb_init,
-		  NULL);

drivers/iommu/amd/init.c

@@ -27,7 +27,6 @@
 #include <asm/apic.h>
 #include <asm/gart.h>
 #include <asm/x86_init.h>
-#include <asm/iommu_table.h>
 #include <asm/io_apic.h>
 #include <asm/irq_remapping.h>
 #include <asm/set_memory.h>
@@ -3257,11 +3256,6 @@ __setup("ivrs_ioapic",		parse_ivrs_ioapic);
 __setup("ivrs_hpet",		parse_ivrs_hpet);
 __setup("ivrs_acpihid",		parse_ivrs_acpihid);
 
-IOMMU_INIT_FINISH(amd_iommu_detect,
-		  gart_iommu_hole_init,
-		  NULL,
-		  NULL);
-
 bool amd_iommu_v2_supported(void)
 {
 	return amd_iommu_v2_present;

drivers/iommu/amd/iommu.c

@@ -1840,7 +1840,10 @@ void amd_iommu_domain_update(struct protection_domain *domain)
 
 static void __init amd_iommu_init_dma_ops(void)
 {
-	swiotlb = (iommu_default_passthrough() || sme_me_mask) ? 1 : 0;
+	if (iommu_default_passthrough() || sme_me_mask)
+		x86_swiotlb_enable = true;
+	else
+		x86_swiotlb_enable = false;
 }
 
 int __init amd_iommu_init_api(void)

drivers/iommu/intel/dmar.c

@@ -30,7 +30,6 @@
 #include <linux/numa.h>
 #include <linux/limits.h>
 #include <asm/irq_remapping.h>
-#include <asm/iommu_table.h>
 #include <trace/events/intel_iommu.h>
 
 #include "../irq_remapping.h"
@@ -912,7 +911,7 @@ dmar_validate_one_drhd(struct acpi_dmar_header *entry, void *arg)
 	return 0;
 }
 
-int __init detect_intel_iommu(void)
+void __init detect_intel_iommu(void)
 {
 	int ret;
 	struct dmar_res_callback validate_drhd_cb = {
@@ -945,8 +944,6 @@ int __init detect_intel_iommu(void)
 		dmar_tbl = NULL;
 	}
 	up_write(&dmar_global_lock);
-
-	return ret ? ret : 1;
 }
 
 static void unmap_iommu(struct intel_iommu *iommu)
@@ -2164,7 +2161,6 @@ static int __init dmar_free_unused_resources(void)
 }
 
 late_initcall(dmar_free_unused_resources);
-IOMMU_INIT_POST(detect_intel_iommu);
 
 /*
  * DMAR Hotplug Support

include/linux/dmar.h

@@ -121,7 +121,7 @@ extern int dmar_remove_dev_scope(struct dmar_pci_notify_info *info,
 				 u16 segment, struct dmar_dev_scope *devices,
 				 int count);
 /* Intel IOMMU detection */
-extern int detect_intel_iommu(void);
+void detect_intel_iommu(void);
 extern int enable_drhd_fault_handling(void);
 extern int dmar_device_add(acpi_handle handle);
 extern int dmar_device_remove(acpi_handle handle);
@@ -197,6 +197,10 @@ static inline bool dmar_platform_optin(void)
 	return false;
 }
 
+static inline void detect_intel_iommu(void)
+{
+}
+
 #endif /* CONFIG_DMAR_TABLE */
 
 struct irte {