Merge branch 'warning-fixes' into next/fixes-non-critical

These are fixes for compiler warnings that for the most
part were introduced during the 3.8 cycle but are otherwise
harmless.

* warning-fixes:
  scripts/sortextable: silence script output
  ARM: s3c: i2c: add platform_device forward declaration
  ARM: mvebu: allow selecting mvebu without Armada XP
  ARM: pick Versatile by default for !MMU
  ARM: integrator: fix build with INTEGRATOR_AP off
  ARM: integrator/versatile: fix NOMMU warnings
  ARM: sa1100: don't warn about mach/ide.h
  ARM: shmobile: fix defconfig warning on CONFIG_USB
  ARM: w90x900: fix legacy assembly syntax
  ARM: samsung: fix assembly syntax for new gas
  ARM: disable virt_to_bus/virt_to_bus almost everywhere
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -261,7 +261,8 @@ config MMU
 #
 choice
 	prompt "ARM system type"
-	default ARCH_MULTIPLATFORM
+	default ARCH_VERSATILE if !MMU
+	default ARCH_MULTIPLATFORM if MMU
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
@@ -1450,6 +1451,10 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
+config ARCH_NO_VIRT_TO_BUS
+	def_bool y
+	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
+
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool

arch/arm/configs/marzen_defconfig

@@ -83,7 +83,6 @@ CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y

arch/arm/configs/shark_defconfig

@@ -73,7 +73,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set

arch/arm/include/asm/dma.h

@@ -105,7 +105,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
  */
 extern void __set_dma_addr(unsigned int chan, void *addr);
 #define set_dma_addr(chan, addr)				\
-	__set_dma_addr(chan, bus_to_virt(addr))
+	__set_dma_addr(chan, (void *)__bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *

arch/arm/include/asm/memory.h

@@ -245,6 +245,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
+#ifdef CONFIG_VIRT_TO_BUS
 static inline __deprecated unsigned long virt_to_bus(void *x)
 {
 	return __virt_to_bus((unsigned long)x);
@@ -254,6 +255,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 {
 	return (void *)__bus_to_virt(x);
 }
+#endif
 
 /*
  * Conversion between a struct page and a physical address.

arch/arm/mach-integrator/common.h

 #include <linux/amba/serial.h>
-#ifdef CONFIG_ARCH_INTEGRATOR_AP
 extern struct amba_pl010_data ap_uart_data;
-#else
-/* Not used without Integrator/AP support anyway */
-struct amba_pl010_data ap_uart_data {};
-#endif
 void integrator_init_early(void);
 int integrator_init(bool is_cp);
 void integrator_reserve(void);

arch/arm/mach-integrator/core.c

@@ -71,7 +71,7 @@ int __init integrator_init(bool is_cp)
 	 * hard-code them. The Integator/CP and forward have proper cell IDs.
 	 * Else we leave them undefined to the bus driver can autoprobe them.
 	 */
-	if (!is_cp) {
+	if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
 		rtc_device.periphid	= 0x00041030;
 		uart0_device.periphid	= 0x00041010;
 		uart1_device.periphid	= 0x00041010;

arch/arm/mach-integrator/integrator_ap.c

@@ -94,7 +94,7 @@ void __iomem *ap_syscon_base;
  * f1b00000	1b000000	GPIO
  */
 
-static struct map_desc ap_io_desc[] __initdata = {
+static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
 	{
 		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),

arch/arm/mach-integrator/integrator_cp.c

@@ -78,7 +78,7 @@ static void __iomem *intcp_con_base;
  * fcb00000	cb000000	CP system control
  */
 
-static struct map_desc intcp_io_desc[] __initdata = {
+static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
 	{
 		.virtual	= IO_ADDRESS(INTEGRATOR_HDR_BASE),
 		.pfn		= __phys_to_pfn(INTEGRATOR_HDR_BASE),

arch/arm/mach-mvebu/Makefile

@@ -4,6 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 
 obj-y				 += system-controller.o
-obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
+obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
+obj-$(CONFIG_ARCH_MVEBU)	 += addr-map.o coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o 
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

@@ -40,17 +40,17 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 1004:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		moveq	\rd, \rd, lsr #SHIFT_2440TXF
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
 	.macro  fifo_full_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2410_UFSTAT_TXFULL
 	.endm
 
@@ -68,18 +68,18 @@
 		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
 		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
 		bic	\rd, \rd, #0xff000
-		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]
 		and	\rd, \rd, #0x00ff0000
 		teq	\rd, #0x00440000		@ is it 2440?
 
 10000:
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
 	.macro fifo_level_s3c2410 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 	.endm
 

arch/arm/mach-s3c24xx/include/mach/entry-macro.S

@@ -31,10 +31,10 @@
 
 		@@ try the interrupt offset register, since it is there
 
-		ldr	\irqstat, [ \base, #INTPND ]
+		ldr	\irqstat, [\base, #INTPND ]
 		teq	\irqstat, #0
 		beq	1002f
-		ldr	\irqnr, [ \base, #INTOFFSET ]
+		ldr	\irqnr, [\base, #INTOFFSET ]
 		mov	\tmp, #1
 		tst	\irqstat, \tmp, lsl \irqnr
 		bne	1001f

arch/arm/mach-s3c24xx/pm-h1940.S

@@ -30,4 +30,4 @@
 
 h1940_pm_return:
 	mov	r0, #S3C2410_PA_GPIO
-	ldr	pc, [ r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO ]
+	ldr	pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]

arch/arm/mach-s3c24xx/sleep-s3c2410.S

@@ -45,9 +45,9 @@ ENTRY(s3c2410_cpu_suspend)
 	ldr	r4, =S3C2410_REFRESH
 	ldr	r5, =S3C24XX_MISCCR
 	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+	ldr	r7, [r4]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [r5]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [r6]		@ get CLKCON (and ensure in TLB)
 
 	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
 	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
@@ -61,8 +61,8 @@ ENTRY(s3c2410_cpu_suspend)
 	@@ align next bit of code to cache line
 	.align	5
 s3c2410_do_sleep:
-	streq	r7, [ r4 ]			@ SDRAM sleep command
-	streq	r8, [ r5 ]			@ SDRAM power-down config
-	streq	r9, [ r6 ]			@ CPU sleep
+	streq	r7, [r4]			@ SDRAM sleep command
+	streq	r8, [r5]			@ SDRAM power-down config
+	streq	r9, [r6]			@ CPU sleep
 1:	beq	1b
 	mov	pc, r14

arch/arm/mach-s3c24xx/sleep-s3c2412.S

@@ -57,12 +57,12 @@ s3c2412_sleep_enter1:
 	 * retry, as simply returning causes the system to lock.
 	*/
 
-	ldrne	r9, [ r1 ]
-	strne	r9, [ r1 ]
-	ldrne	r9, [ r2 ]
-	strne	r9, [ r2 ]
-	ldrne	r9, [ r3 ]
-	strne	r9, [ r3 ]
+	ldrne	r9, [r1]
+	strne	r9, [r1]
+	ldrne	r9, [r2]
+	strne	r9, [r2]
+	ldrne	r9, [r3]
+	strne	r9, [r3]
 	bne	s3c2412_sleep_enter1
 
 	mov	pc, r14

arch/arm/mach-sa1100/lart.c

@@ -24,9 +24,6 @@
 
 #include "generic.h"
 
-
-#warning "include/asm/arch-sa1100/ide.h needs fixing for lart"
-
 static struct mcp_plat_data lart_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,

arch/arm/mach-versatile/Kconfig

@@ -25,4 +25,9 @@ config MACH_VERSATILE_DT
 	  Include support for the ARM(R) Versatile/PB platform,
 	  using the device tree for discovery
 
+config MACH_VERSATILE_AUTO
+	def_bool y
+	depends on !ARCH_VERSATILE_PB && !MACH_VERSATILE_AB
+	select MACH_VERSATILE_DT
+
 endmenu

arch/arm/mach-versatile/core.c

@@ -114,7 +114,7 @@ void __init versatile_init_irq(void)
 	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 }
 
-static struct map_desc versatile_io_desc[] __initdata = {
+static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
 	{
 		.virtual	=  IO_ADDRESS(VERSATILE_SYS_BASE),
 		.pfn		= __phys_to_pfn(VERSATILE_SYS_BASE),

arch/arm/mach-w90x900/include/mach/entry-macro.S

@@ -19,8 +19,8 @@
 
 		mov	\base, #AIC_BA
 
-		ldr	\irqnr, [ \base, #AIC_IPER]
-		ldr	\irqnr, [ \base, #AIC_ISNR]
+		ldr	\irqnr, [\base, #AIC_IPER]
+		ldr	\irqnr, [\base, #AIC_ISNR]
 		cmp	\irqnr, #0
 
 	.endm

arch/arm/plat-samsung/include/plat/debug-macro.S

@@ -14,12 +14,12 @@
 /* The S5PV210/S5PC110 implementations are as belows. */
 
 	.macro fifo_level_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -27,7 +27,7 @@
  * most widely re-used */
 
 	.macro fifo_level_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -36,7 +36,7 @@
 #endif
 
 	.macro  fifo_full_s3c2440 rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -45,11 +45,11 @@
 #endif
 
 	.macro	senduart,rd,rx
-		strb 	\rd, [\rx, # S3C2410_UTXH ]
+		strb 	\rd, [\rx, # S3C2410_UTXH]
 	.endm
 
 	.macro	busyuart, rd, rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -60,7 +60,7 @@
 
 1001:
 		@ busy waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -68,7 +68,7 @@
 	.endm
 
 	.macro	waituart,rd,rx
-		ldr	\rd, [ \rx, # S3C2410_UFCON ]
+		ldr	\rd, [\rx, # S3C2410_UFCON]
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -79,7 +79,7 @@
 		b	1002f
 1001:
 		@ idle waiting for non fifo
-		ldr	\rd, [ \rx, # S3C2410_UTRSTAT ]
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 

include/linux/platform_data/i2c-s3c2410.h

@@ -15,6 +15,8 @@
 
 #define S3C_IICFLG_FILTER	(1<<0)	/* enable s3c2440 filter */
 
+struct platform_device;
+
 /**
  *	struct s3c2410_platform_i2c - Platform data for s3c I2C.
  *	@bus_num: The bus number to use (if possible).

scripts/sortextable.h

@@ -182,7 +182,7 @@ do_func(Elf_Ehdr *ehdr, char const *const fname, table_sort_t custom_sort)
 		_r(&sort_needed_sym->st_value) -
 		_r(&sort_needed_sec->sh_addr);
 
-#if 1
+#if 0
 	printf("sort done marker at %lx\n",
 	       (unsigned long)((char *)sort_done_location - (char *)ehdr));
 #endif