iio: ina2xx: Fix whitespace and re-order code

Group of probably overly rigorous whitespace and code cleanups.
 - Alphabetize includes
 - Assign to variables in the order they are defined
 - Alignment issues
 - Group alike statements together
 - Use helper macros
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/adc/ina2xx-adc.c

@@ -19,17 +19,18 @@
  *
  * Configurable 7-bit I2C slave address from 0x40 to 0x4F
  */
-#include <linux/module.h>
-#include <linux/kthread.h>
+
 #include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/sysfs.h>
-#include <linux/i2c.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
 #include <linux/regmap.h>
-#include <linux/platform_data/ina2xx.h>
-
 #include <linux/util_macros.h>
 
+#include <linux/platform_data/ina2xx.h>
+
 /* INA2XX registers definition */
 #define INA2XX_CONFIG                   0x00
 #define INA2XX_SHUNT_VOLTAGE            0x01	/* readonly */
@@ -38,7 +39,7 @@
 #define INA2XX_CURRENT                  0x04	/* readonly */
 #define INA2XX_CALIBRATION              0x05
 
-#define INA226_ALERT_MASK		0x06
+#define INA226_ALERT_MASK		GENMASK(2, 1)
 #define INA266_CVRF			BIT(3)
 
 #define INA2XX_MAX_REGISTERS            8
@@ -113,7 +114,7 @@ struct ina2xx_chip_info {
 	struct mutex state_lock;
 	unsigned int shunt_resistor;
 	int avg;
-	s64 prev_ns;	/* track buffer capture time, check for underruns*/
+	s64 prev_ns; /* track buffer capture time, check for underruns */
 	int int_time_vbus; /* Bus voltage integration time uS */
 	int int_time_vshunt; /* Shunt voltage integration time uS */
 	bool allow_async_readout;
@@ -149,7 +150,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		ret = regmap_read(chip->regmap, chan->address, &regval);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		if (is_signed_reg(chan->address))
@@ -285,8 +286,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
 			    int val, int val2, long mask)
 {
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
-	int ret;
 	unsigned int config, tmp;
+	int ret;
 
 	if (iio_buffer_enabled(indio_dev))
 		return -EBUSY;
@@ -294,8 +295,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
 	mutex_lock(&chip->state_lock);
 
 	ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config);
-	if (ret < 0)
-		goto _err;
+	if (ret)
+		goto err;
 
 	tmp = config;
 
@@ -310,19 +311,19 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
 		else
 			ret = ina226_set_int_time_vbus(chip, val2, &tmp);
 		break;
+
 	default:
 		ret = -EINVAL;
 	}
 
 	if (!ret && (tmp != config))
 		ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp);
-_err:
+err:
 	mutex_unlock(&chip->state_lock);
 
 	return ret;
 }
 
-
 static ssize_t ina2xx_allow_async_readout_show(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
@@ -355,6 +356,7 @@ static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
 		return -EINVAL;
 
 	chip->shunt_resistor = val;
+
 	return 0;
 }
 
@@ -500,7 +502,7 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
 
 static int ina2xx_capture_thread(void *data)
 {
-	struct iio_dev *indio_dev = (struct iio_dev *)data;
+	struct iio_dev *indio_dev = data;
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
 	unsigned int sampling_us = SAMPLING_PERIOD(chip);
 	int buffer_us;
@@ -575,8 +577,7 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev,
 }
 
 /* Possible integration times for vshunt and vbus */
-static IIO_CONST_ATTR_INT_TIME_AVAIL \
- ("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
+static IIO_CONST_ATTR_INT_TIME_AVAIL("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
 
 static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR,
 		       ina2xx_allow_async_readout_show,
@@ -598,21 +599,23 @@ static const struct attribute_group ina2xx_attribute_group = {
 };
 
 static const struct iio_info ina2xx_info = {
-	.debugfs_reg_access = &ina2xx_debug_reg,
-	.read_raw = &ina2xx_read_raw,
-	.write_raw = &ina2xx_write_raw,
-	.attrs = &ina2xx_attribute_group,
 	.driver_module = THIS_MODULE,
+	.attrs = &ina2xx_attribute_group,
+	.read_raw = ina2xx_read_raw,
+	.write_raw = ina2xx_write_raw,
+	.debugfs_reg_access = ina2xx_debug_reg,
 };
 
 /* Initialize the configuration and calibration registers. */
 static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
 {
 	u16 regval;
-	int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
+	int ret;
 
-	if (ret < 0)
+	ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
+	if (ret)
 		return ret;
+
 	/*
 	 * Set current LSB to 1mA, shunt is in uOhms
 	 * (equation 13 in datasheet). We hardcode a Current_LSB
@@ -632,8 +635,8 @@ static int ina2xx_probe(struct i2c_client *client,
 	struct ina2xx_chip_info *chip;
 	struct iio_dev *indio_dev;
 	struct iio_buffer *buffer;
-	int ret;
 	unsigned int val;
+	int ret;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
 	if (!indio_dev)
@@ -641,8 +644,19 @@ static int ina2xx_probe(struct i2c_client *client,
 
 	chip = iio_priv(indio_dev);
 
+	/* This is only used for device removal purposes. */
+	i2c_set_clientdata(client, indio_dev);
+
+	chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		dev_err(&client->dev, "failed to allocate register map\n");
+		return PTR_ERR(chip->regmap);
+	}
+
 	chip->config = &ina2xx_config[id->driver_data];
 
+	mutex_init(&chip->state_lock);
+
 	if (of_property_read_u32(client->dev.of_node,
 				 "shunt-resistor", &val) < 0) {
 		struct ina2xx_platform_data *pdata =
@@ -658,25 +672,6 @@ static int ina2xx_probe(struct i2c_client *client,
 	if (ret)
 		return ret;
 
-	mutex_init(&chip->state_lock);
-
-	/* This is only used for device removal purposes. */
-	i2c_set_clientdata(client, indio_dev);
-
-	indio_dev->name = id->name;
-	indio_dev->channels = ina2xx_channels;
-	indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
-
-	indio_dev->dev.parent = &client->dev;
-	indio_dev->info = &ina2xx_info;
-	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
-
-	chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
-	if (IS_ERR(chip->regmap)) {
-		dev_err(&client->dev, "failed to allocate register map\n");
-		return PTR_ERR(chip->regmap);
-	}
-
 	/* Patch the current config register with default. */
 	val = chip->config->config_default;
 
@@ -687,24 +682,28 @@ static int ina2xx_probe(struct i2c_client *client,
 	}
 
 	ret = ina2xx_init(chip, val);
-	if (ret < 0) {
-		dev_err(&client->dev, "error configuring the device: %d\n",
-			ret);
-		return -ENODEV;
+	if (ret) {
+		dev_err(&client->dev, "error configuring the device\n");
+		return ret;
 	}
 
+	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = ina2xx_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
+	indio_dev->name = id->name;
+	indio_dev->info = &ina2xx_info;
+	indio_dev->setup_ops = &ina2xx_setup_ops;
+
 	buffer = devm_iio_kfifo_allocate(&indio_dev->dev);
 	if (!buffer)
 		return -ENOMEM;
 
-	indio_dev->setup_ops = &ina2xx_setup_ops;
-
 	iio_device_attach_buffer(indio_dev, buffer);
 
 	return iio_device_register(indio_dev);
 }
 
-
 static int ina2xx_remove(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -717,7 +716,6 @@ static int ina2xx_remove(struct i2c_client *client)
 				  INA2XX_MODE_MASK, 0);
 }
 
-
 static const struct i2c_device_id ina2xx_id[] = {
 	{"ina219", ina219},
 	{"ina220", ina219},
@@ -726,7 +724,6 @@ static const struct i2c_device_id ina2xx_id[] = {
 	{"ina231", ina226},
 	{}
 };
-
 MODULE_DEVICE_TABLE(i2c, ina2xx_id);
 
 static struct i2c_driver ina2xx_driver = {
@@ -737,7 +734,6 @@ static struct i2c_driver ina2xx_driver = {
 	.remove = ina2xx_remove,
 	.id_table = ina2xx_id,
 };
-
 module_i2c_driver(ina2xx_driver);
 
 MODULE_AUTHOR("Marc Titinger <marc.titinger@baylibre.com>");