Commit 790869da authored by Andrej Krutak's avatar Andrej Krutak Committed by Takashi Iwai

ALSA: line6: Add support for POD X3

This includes audio in/out and basic initialization via control EP (emulates
what original driver does). The initialization is done similarly to original
POD, firmware and serial IDs are read and exported via sysfs.
Signed-off-by: default avatarAndrej Krutak <dev@andree.sk>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 7811a3ad
...@@ -21,10 +21,10 @@ config SND_USB_POD ...@@ -21,10 +21,10 @@ config SND_USB_POD
re-amping) re-amping)
config SND_USB_PODHD config SND_USB_PODHD
tristate "Line 6 POD HD300/400/500 USB support" tristate "Line 6 POD X3/HD300/400/500 USB support"
select SND_USB_LINE6 select SND_USB_LINE6
help help
This is a driver for POD HD300, 400 and 500 devices. This is a driver for POD X3, HD300, 400 and 500 devices.
config SND_USB_TONEPORT config SND_USB_TONEPORT
tristate "TonePort GX, UX1 and UX2 USB support" tristate "TonePort GX, UX1 and UX2 USB support"
......
...@@ -2,6 +2,7 @@ ...@@ -2,6 +2,7 @@
* Line 6 Pod HD * Line 6 Pod HD
* *
* Copyright (C) 2011 Stefan Hajnoczi <stefanha@gmail.com> * Copyright (C) 2011 Stefan Hajnoczi <stefanha@gmail.com>
* Copyright (C) 2015 Andrej Krutak <dev@andree.sk>
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as * modify it under the terms of the GNU General Public License as
...@@ -18,11 +19,44 @@ ...@@ -18,11 +19,44 @@
#include "driver.h" #include "driver.h"
#include "pcm.h" #include "pcm.h"
#define PODHD_STARTUP_DELAY 500
/*
* Stages of POD startup procedure
*/
enum {
PODHD_STARTUP_INIT = 1,
PODHD_STARTUP_SCHEDULE_WORKQUEUE,
PODHD_STARTUP_SETUP,
PODHD_STARTUP_LAST = PODHD_STARTUP_SETUP - 1
};
enum { enum {
LINE6_PODHD300, LINE6_PODHD300,
LINE6_PODHD400, LINE6_PODHD400,
LINE6_PODHD500_0, LINE6_PODHD500_0,
LINE6_PODHD500_1, LINE6_PODHD500_1,
LINE6_PODX3,
};
struct usb_line6_podhd {
/* Generic Line 6 USB data */
struct usb_line6 line6;
/* Timer for device initialization */
struct timer_list startup_timer;
/* Work handler for device initialization */
struct work_struct startup_work;
/* Current progress in startup procedure */
int startup_progress;
/* Serial number of device */
u32 serial_number;
/* Firmware version */
int firmware_version;
}; };
static struct snd_ratden podhd_ratden = { static struct snd_ratden podhd_ratden = {
...@@ -71,9 +105,196 @@ static struct line6_pcm_properties podhd_pcm_properties = { ...@@ -71,9 +105,196 @@ static struct line6_pcm_properties podhd_pcm_properties = {
.rates = { .rates = {
.nrats = 1, .nrats = 1,
.rats = &podhd_ratden}, .rats = &podhd_ratden},
.bytes_per_channel = 3 /* 24bit audio (stereo) */ .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
}; };
static struct line6_pcm_properties podx3_pcm_properties = {
.playback_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_SYNC_START),
.formats = SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_48000,
.rate_min = 48000,
.rate_max = 48000,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = 60000,
.period_bytes_min = 64,
.period_bytes_max = 8192,
.periods_min = 1,
.periods_max = 1024},
.capture_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_SYNC_START),
.formats = SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_48000,
.rate_min = 48000,
.rate_max = 48000,
/* 1+2: Main signal (out), 3+4: Tone 1,
* 5+6: Tone 2, 7+8: raw
*/
.channels_min = 8,
.channels_max = 8,
.buffer_bytes_max = 60000,
.period_bytes_min = 64,
.period_bytes_max = 8192,
.periods_min = 1,
.periods_max = 1024},
.rates = {
.nrats = 1,
.rats = &podhd_ratden},
.bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
};
static void podhd_startup_start_workqueue(unsigned long data);
static void podhd_startup_workqueue(struct work_struct *work);
static int podhd_startup_finalize(struct usb_line6_podhd *pod);
static ssize_t serial_number_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct snd_card *card = dev_to_snd_card(dev);
struct usb_line6_podhd *pod = card->private_data;
return sprintf(buf, "%u\n", pod->serial_number);
}
static ssize_t firmware_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct snd_card *card = dev_to_snd_card(dev);
struct usb_line6_podhd *pod = card->private_data;
return sprintf(buf, "%06x\n", pod->firmware_version);
}
static DEVICE_ATTR_RO(firmware_version);
static DEVICE_ATTR_RO(serial_number);
static struct attribute *podhd_dev_attrs[] = {
&dev_attr_firmware_version.attr,
&dev_attr_serial_number.attr,
NULL
};
static const struct attribute_group podhd_dev_attr_group = {
.name = "podhd",
.attrs = podhd_dev_attrs,
};
/*
* POD X3 startup procedure.
*
* May be compatible with other POD HD's, since it's also similar to the
* previous POD setup. In any case, it doesn't seem to be required for the
* audio nor bulk interfaces to work.
*/
static void podhd_startup(struct usb_line6_podhd *pod)
{
CHECK_STARTUP_PROGRESS(pod->startup_progress, PODHD_STARTUP_INIT);
/* delay startup procedure: */
line6_start_timer(&pod->startup_timer, PODHD_STARTUP_DELAY,
podhd_startup_start_workqueue, (unsigned long)pod);
}
static void podhd_startup_start_workqueue(unsigned long data)
{
struct usb_line6_podhd *pod = (struct usb_line6_podhd *)data;
CHECK_STARTUP_PROGRESS(pod->startup_progress,
PODHD_STARTUP_SCHEDULE_WORKQUEUE);
/* schedule work for global work queue: */
schedule_work(&pod->startup_work);
}
static int podhd_dev_start(struct usb_line6_podhd *pod)
{
int ret;
u8 init_bytes[8];
int i;
struct usb_device *usbdev = pod->line6.usbdev;
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
0x11, 0,
NULL, 0, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret);
return ret;
}
/* NOTE: looks like some kind of ping message */
ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0x11, 0x0,
&init_bytes, 3, LINE6_TIMEOUT * HZ);
if (ret < 0) {
dev_err(pod->line6.ifcdev,
"receive length failed (error %d)\n", ret);
return ret;
}
pod->firmware_version =
(init_bytes[0] << 16) | (init_bytes[1] << 8) | (init_bytes[2] << 0);
for (i = 0; i <= 16; i++) {
ret = line6_read_data(&pod->line6, 0xf000 + 0x08 * i, init_bytes, 8);
if (ret < 0)
return ret;
}
ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT,
1, 0,
NULL, 0, LINE6_TIMEOUT * HZ);
if (ret < 0)
return ret;
return 0;
}
static void podhd_startup_workqueue(struct work_struct *work)
{
struct usb_line6_podhd *pod =
container_of(work, struct usb_line6_podhd, startup_work);
CHECK_STARTUP_PROGRESS(pod->startup_progress, PODHD_STARTUP_SETUP);
podhd_dev_start(pod);
line6_read_serial_number(&pod->line6, &pod->serial_number);
podhd_startup_finalize(pod);
}
static int podhd_startup_finalize(struct usb_line6_podhd *pod)
{
struct usb_line6 *line6 = &pod->line6;
/* ALSA audio interface: */
return snd_card_register(line6->card);
}
static void podhd_disconnect(struct usb_line6 *line6)
{
struct usb_line6_podhd *pod = (struct usb_line6_podhd *)line6;
if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
del_timer_sync(&pod->startup_timer);
cancel_work_sync(&pod->startup_work);
}
}
/* /*
Try to init POD HD device. Try to init POD HD device.
*/ */
...@@ -81,6 +302,16 @@ static int podhd_init(struct usb_line6 *line6, ...@@ -81,6 +302,16 @@ static int podhd_init(struct usb_line6 *line6,
const struct usb_device_id *id) const struct usb_device_id *id)
{ {
int err; int err;
struct usb_line6_podhd *pod = (struct usb_line6_podhd *) line6;
line6->disconnect = podhd_disconnect;
if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
/* create sysfs entries: */
err = snd_card_add_dev_attr(line6->card, &podhd_dev_attr_group);
if (err < 0)
return err;
}
/* initialize MIDI subsystem: */ /* initialize MIDI subsystem: */
err = line6_init_midi(line6); err = line6_init_midi(line6);
...@@ -88,12 +319,22 @@ static int podhd_init(struct usb_line6 *line6, ...@@ -88,12 +319,22 @@ static int podhd_init(struct usb_line6 *line6,
return err; return err;
/* initialize PCM subsystem: */ /* initialize PCM subsystem: */
err = line6_init_pcm(line6, &podhd_pcm_properties); err = line6_init_pcm(line6,
(id->driver_info == LINE6_PODX3) ? &podx3_pcm_properties :
&podhd_pcm_properties);
if (err < 0) if (err < 0)
return err; return err;
/* register USB audio system: */ if (!(pod->line6.properties->capabilities & LINE6_CAP_CONTROL)) {
return snd_card_register(line6->card); /* register USB audio system directly */
return podhd_startup_finalize(pod);
}
/* init device and delay registering */
init_timer(&pod->startup_timer);
INIT_WORK(&pod->startup_work, podhd_startup_workqueue);
podhd_startup(pod);
return 0;
} }
#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod) #define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
...@@ -101,10 +342,12 @@ static int podhd_init(struct usb_line6 *line6, ...@@ -101,10 +342,12 @@ static int podhd_init(struct usb_line6 *line6,
/* table of devices that work with this driver */ /* table of devices that work with this driver */
static const struct usb_device_id podhd_id_table[] = { static const struct usb_device_id podhd_id_table[] = {
/* TODO: no need to alloc data interfaces when only audio is used */
{ LINE6_DEVICE(0x5057), .driver_info = LINE6_PODHD300 }, { LINE6_DEVICE(0x5057), .driver_info = LINE6_PODHD300 },
{ LINE6_DEVICE(0x5058), .driver_info = LINE6_PODHD400 }, { LINE6_DEVICE(0x5058), .driver_info = LINE6_PODHD400 },
{ LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500_0 }, { LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500_0 },
{ LINE6_IF_NUM(0x414D, 1), .driver_info = LINE6_PODHD500_1 }, { LINE6_IF_NUM(0x414D, 1), .driver_info = LINE6_PODHD500_1 },
{ LINE6_IF_NUM(0x414A, 0), .driver_info = LINE6_PODX3 },
{} {}
}; };
...@@ -114,8 +357,7 @@ static const struct line6_properties podhd_properties_table[] = { ...@@ -114,8 +357,7 @@ static const struct line6_properties podhd_properties_table[] = {
[LINE6_PODHD300] = { [LINE6_PODHD300] = {
.id = "PODHD300", .id = "PODHD300",
.name = "POD HD300", .name = "POD HD300",
.capabilities = LINE6_CAP_CONTROL .capabilities = LINE6_CAP_PCM
| LINE6_CAP_PCM
| LINE6_CAP_HWMON, | LINE6_CAP_HWMON,
.altsetting = 5, .altsetting = 5,
.ep_ctrl_r = 0x84, .ep_ctrl_r = 0x84,
...@@ -126,8 +368,7 @@ static const struct line6_properties podhd_properties_table[] = { ...@@ -126,8 +368,7 @@ static const struct line6_properties podhd_properties_table[] = {
[LINE6_PODHD400] = { [LINE6_PODHD400] = {
.id = "PODHD400", .id = "PODHD400",
.name = "POD HD400", .name = "POD HD400",
.capabilities = LINE6_CAP_CONTROL .capabilities = LINE6_CAP_PCM
| LINE6_CAP_PCM
| LINE6_CAP_HWMON, | LINE6_CAP_HWMON,
.altsetting = 5, .altsetting = 5,
.ep_ctrl_r = 0x84, .ep_ctrl_r = 0x84,
...@@ -138,8 +379,7 @@ static const struct line6_properties podhd_properties_table[] = { ...@@ -138,8 +379,7 @@ static const struct line6_properties podhd_properties_table[] = {
[LINE6_PODHD500_0] = { [LINE6_PODHD500_0] = {
.id = "PODHD500", .id = "PODHD500",
.name = "POD HD500", .name = "POD HD500",
.capabilities = LINE6_CAP_CONTROL .capabilities = LINE6_CAP_PCM
| LINE6_CAP_PCM
| LINE6_CAP_HWMON, | LINE6_CAP_HWMON,
.altsetting = 1, .altsetting = 1,
.ep_ctrl_r = 0x81, .ep_ctrl_r = 0x81,
...@@ -150,8 +390,7 @@ static const struct line6_properties podhd_properties_table[] = { ...@@ -150,8 +390,7 @@ static const struct line6_properties podhd_properties_table[] = {
[LINE6_PODHD500_1] = { [LINE6_PODHD500_1] = {
.id = "PODHD500", .id = "PODHD500",
.name = "POD HD500", .name = "POD HD500",
.capabilities = LINE6_CAP_CONTROL .capabilities = LINE6_CAP_PCM
| LINE6_CAP_PCM
| LINE6_CAP_HWMON, | LINE6_CAP_HWMON,
.altsetting = 1, .altsetting = 1,
.ep_ctrl_r = 0x81, .ep_ctrl_r = 0x81,
...@@ -159,6 +398,17 @@ static const struct line6_properties podhd_properties_table[] = { ...@@ -159,6 +398,17 @@ static const struct line6_properties podhd_properties_table[] = {
.ep_audio_r = 0x86, .ep_audio_r = 0x86,
.ep_audio_w = 0x02, .ep_audio_w = 0x02,
}, },
[LINE6_PODX3] = {
.id = "PODX3",
.name = "POD X3",
.capabilities = LINE6_CAP_CONTROL
| LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT,
.altsetting = 1,
.ep_ctrl_r = 0x81,
.ep_ctrl_w = 0x01,
.ep_audio_r = 0x86,
.ep_audio_w = 0x02,
},
}; };
/* /*
...@@ -169,7 +419,7 @@ static int podhd_probe(struct usb_interface *interface, ...@@ -169,7 +419,7 @@ static int podhd_probe(struct usb_interface *interface,
{ {
return line6_probe(interface, id, "Line6-PODHD", return line6_probe(interface, id, "Line6-PODHD",
&podhd_properties_table[id->driver_info], &podhd_properties_table[id->driver_info],
podhd_init, sizeof(struct usb_line6)); podhd_init, sizeof(struct usb_line6_podhd));
} }
static struct usb_driver podhd_driver = { static struct usb_driver podhd_driver = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment