Skip to content

L
linux
Commit 79149fb8 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Mark Brown
Browse files
Options

ASoC: dt-bindings: simple-card: switch to yaml base Documentation 

This patch switches from .txt base to .yaml base Document.
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/87sghovzwb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 79ca7825
Show whitespace changes
Inline Side-by-side
Showing with 484 additions and 351 deletions
Documentation/devicetree/bindings/sound/simple-card.txt deleted 100644 → 0
View file @ 79ca7825
Simple-Card:
Simple-Card specifies audio DAI connections of SoC <-> codec.
Required properties:
- compatible : "simple-audio-card"
Optional properties:
- simple-audio-card,name : User specified audio sound card name, one string
property.
- simple-audio-card,widgets : Please refer to widgets.txt.
- simple-audio-card,routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the
connection's sink, the second being the connection's
source.
- simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec
mclk. When defined, mclk-fs property defined in
dai-link sub nodes are ignored.
- simple-audio-card,hp-det-gpio : Reference to GPIO that signals when
headphones are attached.
- simple-audio-card,mic-det-gpio : Reference to GPIO that signals when
a microphone is attached.
- simple-audio-card,aux-devs : List of phandles pointing to auxiliary devices, such
as amplifiers, to be added to the sound card.
- simple-audio-card,pin-switches : List of strings containing the widget names for
which pin switches must be created.
Optional subnodes:
- simple-audio-card,dai-link : Container for dai-link level
properties and the CPU and CODEC
sub-nodes. This container may be
omitted when the card has only one
DAI link. See the examples and the
section below.
Dai-link subnode properties and subnodes:
If dai-link subnode is omitted and the subnode properties are directly
under "sound"-node the subnode property and subnode names have to be
prefixed with "simple-audio-card,"-prefix.
Required dai-link subnodes:
- cpu : CPU sub-node
- codec : CODEC sub-node
Optional dai-link subnode properties:
- format : CPU/CODEC common audio format.
"i2s", "right_j", "left_j" , "dsp_a"
"dsp_b", "ac97", "pdm", "msb", "lsb"
- frame-master : Indicates dai-link frame master.
phandle to a cpu or codec subnode.
- bitclock-master : Indicates dai-link bit clock master.
phandle to a cpu or codec subnode.
- bitclock-inversion : bool property. Add this if the
dai-link uses bit clock inversion.
- frame-inversion : bool property. Add this if the
dai-link uses frame clock inversion.
- mclk-fs : Multiplication factor between stream
rate and codec mclk, applied only for
the dai-link.
For backward compatibility the frame-master and bitclock-master
properties can be used as booleans in codec subnode to indicate if the
codec is the dai-link frame or bit clock master. In this case there
should be no dai-link node, the same properties should not be present
at sound-node level, and the bitclock-inversion and frame-inversion
properties should also be placed in the codec node if needed.
Required CPU/CODEC subnodes properties:
- sound-dai : phandle and port of CPU/CODEC
Optional CPU/CODEC subnodes properties:
- dai-tdm-slot-num : Please refer to tdm-slot.txt.
- dai-tdm-slot-width : Please refer to tdm-slot.txt.
- clocks / system-clock-frequency : specify subnode's clock if needed.
it can be specified via "clocks" if system has
clock node (= common clock), or "system-clock-frequency"
(if system doens't support common clock)
If a clock is specified, it is
enabled with clk_prepare_enable()
in dai startup() and disabled with
clk_disable_unprepare() in dai
shutdown().
If a clock is specified and a
multiplication factor is given with
mclk-fs, the clock will be set to the
calculated mclk frequency when the
stream starts.
- system-clock-direction-out : specifies clock direction as 'out' on
initialization. It is useful for some aCPUs with
fixed clocks.
-------------------------------------------
Example 1 - single DAI link:
-------------------------------------------
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "VF610-Tower-Sound-Card";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&dailink0_master>;
simple-audio-card,frame-master = <&dailink0_master>;
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "External Speaker";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Headphone Jack", "HP_OUT",
"External Speaker", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sh_fsi2 0>;
};
dailink0_master: simple-audio-card,codec {
sound-dai = <&ak4648>;
clocks = <&osc>;
};
};
&i2c0 {
ak4648: ak4648@12 {
#sound-dai-cells = <0>;
compatible = "asahi-kasei,ak4648";
reg = <0x12>;
};
};
sh_fsi2: sh_fsi2@ec230000 {
#sound-dai-cells = <1>;
compatible = "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
interrupt-parent = <&gic>;
interrupts = <0 146 0x4>;
};
-------------------------------------------
Example 2 - many DAI links:
-------------------------------------------
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "Cubox Audio";
simple-audio-card,dai-link@0 { /* I2S - HDMI */
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&audio1 0>;
};
codec {
sound-dai = <&tda998x 0>;
};
};
simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */
reg = <1>;
cpu {
sound-dai = <&audio1 1>;
};
codec {
sound-dai = <&tda998x 1>;
};
};
simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */
reg = <2>;
cpu {
sound-dai = <&audio1 1>;
};
codec {
sound-dai = <&spdif_codec>;
};
};
};
-------------------------------------------
Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
through TPA6130A2 amplifier to headphones:
-------------------------------------------
&i2c0 {
codec: tlv320dac3100@18 {
compatible = "ti,tlv320dac3100";
...
}
amp: tpa6130a2@60 {
compatible = "ti,tpa6130a2";
...
}
}
sound {
compatible = "simple-audio-card";
...
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HPLEFT",
"Headphone Jack", "HPRIGHT",
"LEFTIN", "HPL",
"RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&amp>;
simple-audio-card,cpu {
sound-dai = <&ssi2>;
};
simple-audio-card,codec {
sound-dai = <&codec>;
clocks = ...
};
};
-------------------------------------------
Example 4. Sampling Rate Conversion
-------------------------------------------
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4643";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
simple-audio-card,convert-rate = <48000>;
simple-audio-card,prefix = "ak4642";
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"DAI0 Capture", "ak4642 Capture";
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
system-clock-frequency = <11289600>;
};
};
-------------------------------------------
Example 5. 2 CPU 1 Codec (Mixing)
-------------------------------------------
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4643";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&dpcmcpu>;
simple-audio-card,frame-master = <&dpcmcpu>;
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"ak4642 Playback", "DAI1 Playback";
dpcmcpu: cpu@0 {
sound-dai = <&rcar_sound 0>;
};
cpu@1 {
sound-dai = <&rcar_sound 1>;
};
codec {
prefix = "ak4642";
sound-dai = <&ak4643>;
clocks = <&audio_clock>;
};
};
-------------------------------------------
Example 6 - many DAI links with DPCM:
-------------------------------------------
CPU0 ------ ak4613
CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */
CPU2 --/ /* DPCM 3ch/4ch */
CPU3 --/ /* DPCM 5ch/6ch */
CPU4 --/ /* DPCM 7ch/8ch */
CPU5 ------ PCM3168A-c
sound {
compatible = "simple-audio-card";
simple-audio-card,routing =
"pcm3168a Playback", "DAI1 Playback",
"pcm3168a Playback", "DAI2 Playback",
"pcm3168a Playback", "DAI3 Playback",
"pcm3168a Playback", "DAI4 Playback";
simple-audio-card,dai-link@0 {
format = "left_j";
bitclock-master = <&sndcpu0>;
frame-master = <&sndcpu0>;
sndcpu0: cpu {
sound-dai = <&rcar_sound 0>;
};
codec {
sound-dai = <&ak4613>;
};
};
simple-audio-card,dai-link@1 {
format = "i2s";
bitclock-master = <&sndcpu1>;
frame-master = <&sndcpu1>;
convert-channels = <8>; /* TDM Split */
sndcpu1: cpu@0 {
sound-dai = <&rcar_sound 1>;
};
cpu@1 {
sound-dai = <&rcar_sound 2>;
};
cpu@2 {
sound-dai = <&rcar_sound 3>;
};
cpu@3 {
sound-dai = <&rcar_sound 4>;
};
codec {
mclk-fs = <512>;
prefix = "pcm3168a";
dai-tdm-slot-num = <8>;
sound-dai = <&pcm3168a 0>;
};
};
simple-audio-card,dai-link@2 {
format = "i2s";
bitclock-master = <&sndcpu2>;
frame-master = <&sndcpu2>;
sndcpu2: cpu {
sound-dai = <&rcar_sound 5>;
};
codec {
mclk-fs = <512>;
prefix = "pcm3168a";
sound-dai = <&pcm3168a 1>;
};
};
};
Documentation/devicetree/bindings/sound/simple-card.yaml 0 → 100644
View file @ 79149fb8
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/simple-card.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Simple Audio Card Driver Device Tree Bindings
maintainers:
- Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
definitions:
frame-master:
description: Indicates dai-link frame master.
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
bitclock-master:
description: Indicates dai-link bit clock master
allOf:
- $ref: /schemas/types.yaml#/definitions/phandle-array
- maxItems: 1
frame-inversion:
description: dai-link uses frame clock inversion
$ref: /schemas/types.yaml#/definitions/flag
bitclock-inversion:
description: dai-link uses bit clock inversion
$ref: /schemas/types.yaml#/definitions/flag
dai-tdm-slot-num:
description: see tdm-slot.txt.
$ref: /schemas/types.yaml#/definitions/uint32
dai-tdm-slot-width:
description: see tdm-slot.txt.
$ref: /schemas/types.yaml#/definitions/uint32
system-clock-frequency:
description: |
If a clock is specified and a multiplication factor is given with
mclk-fs, the clock will be set to the calculated mclk frequency
when the stream starts.
$ref: /schemas/types.yaml#/definitions/uint32
system-clock-direction-out:
description: |
specifies clock direction as 'out' on initialization.
It is useful for some aCPUs with fixed clocks.
$ref: /schemas/types.yaml#/definitions/flag
mclk-fs:
description: |
Multiplication factor between stream rate and codec mclk.
When defined, mclk-fs property defined in dai-link sub nodes are ignored.
$ref: /schemas/types.yaml#/definitions/uint32
aux-devs:
description: |
List of phandles pointing to auxiliary devices, such
as amplifiers, to be added to the sound card.
$ref: /schemas/types.yaml#/definitions/phandle-array
convert-rate:
description: CPU to Codec rate convert.
$ref: /schemas/types.yaml#/definitions/uint32
convert-channels:
description: CPU to Codec rate channels.
$ref: /schemas/types.yaml#/definitions/uint32
prefix:
description: "device name prefix"
$ref: /schemas/types.yaml#/definitions/string
label:
maxItems: 1
routing:
description: |
A list of the connections between audio components.
Each entry is a pair of strings, the first being the
connection's sink, the second being the connection's source.
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
widgets:
description: User specified audio sound widgets.
$ref: /schemas/types.yaml#/definitions/non-unique-string-array
pin-switches:
description: the widget names for which pin switches must be created.
$ref: /schemas/types.yaml#/definitions/string-array
format:
description: audio format.
items:
enum:
- i2s
- right_j
- left_j
- dsp_a
- dsp_b
- ac97
- pdm
- msb
- lsb
dai:
type: object
properties:
sound-dai:
maxItems: 1
# common properties
mclk-fs:
$ref: "#/definitions/mclk-fs"
prefix:
$ref: "#/definitions/prefix"
frame-inversion:
$ref: "#/definitions/frame-inversion"
bitclock-inversion:
$ref: "#/definitions/bitclock-inversion"
frame-master:
$ref: /schemas/types.yaml#/definitions/flag
bitclock-master:
$ref: /schemas/types.yaml#/definitions/flag
dai-tdm-slot-num:
$ref: "#/definitions/dai-tdm-slot-num"
dai-tdm-slot-width:
$ref: "#/definitions/dai-tdm-slot-width"
clocks:
maxItems: 1
system-clock-frequency:
$ref: "#/definitions/system-clock-frequency"
system-clock-direction-out:
$ref: "#/definitions/system-clock-direction-out"
required:
- sound-dai
properties:
compatible:
contains:
enum:
- simple-audio-card
- simple-scu-audio-card
"#address-cells":
const: 1
"#size-cells":
const: 0
label:
$ref: "#/definitions/label"
simple-audio-card,name:
description: User specified audio sound card name.
$ref: /schemas/types.yaml#/definitions/string
# use patternProperties to avoid naming "xxx,yyy" issue
patternProperties:
"^simple-audio-card,widgets$":
$ref: "#/definitions/widgets"
"^simple-audio-card,routing$":
$ref: "#/definitions/routing"
"^simple-audio-card,cpu(@[0-9a-f]+)?":
$ref: "#/definitions/dai"
"^simple-audio-card,codec(@[0-9a-f]+)?":
$ref: "#/definitions/dai"
# common properties
"^simple-audio-card,frame-master$":
$ref: "#/definitions/frame-master"
"^simple-audio-card,bitclock-master$":
$ref: "#/definitions/bitclock-master"
"^simple-audio-card,frame-inversion$":
$ref: "#/definitions/frame-inversion"
"^simple-audio-card,bitclock-inversion$":
$ref: "#/definitions/bitclock-inversion"
"^simple-audio-card,format$":
$ref: "#/definitions/format"
"^simple-audio-card,mclk-fs$":
$ref: "#/definitions/mclk-fs"
"^simple-audio-card,aux-devs$":
$ref: "#/definitions/aux-devs"
"^simple-audio-card,convert-rate$":
$ref: "#/definitions/convert-rate"
"^simple-audio-card,convert-channels$":
$ref: "#/definitions/convert-channels"
"^simple-audio-card,prefix$":
$ref: "#/definitions/prefix"
"^simple-audio-card,pin-switches$":
$ref: "#/definitions/pin-switches"
"^simple-audio-card,hp-det-gpio$":
maxItems: 1
"^simple-audio-card,mic-det-gpio$":
maxItems: 1
"^simple-audio-card,dai-link(@[0-9a-f]+)?$":
description: |
Container for dai-link level properties and the CPU and CODEC sub-nodes.
This container may be omitted when the card has only one DAI link.
type: object
properties:
reg:
maxItems: 1
# common properties
frame-master:
$ref: "#/definitions/frame-master"
bitclock-master:
$ref: "#/definitions/bitclock-master"
frame-inversion:
$ref: "#/definitions/frame-inversion"
bitclock-inversion:
$ref: "#/definitions/bitclock-inversion"
format:
$ref: "#/definitions/format"
mclk-fs:
$ref: "#/definitions/mclk-fs"
aux-devs:
$ref: "#/definitions/aux-devs"
convert-rate:
$ref: "#/definitions/convert-rate"
convert-channels:
$ref: "#/definitions/convert-channels"
prefix:
$ref: "#/definitions/prefix"
pin-switches:
$ref: "#/definitions/pin-switches"
hp-det-gpio:
maxItems: 1
mic-det-gpio:
maxItems: 1
patternProperties:
"^cpu(@[0-9a-f]+)?":
$ref: "#/definitions/dai"
"^codec(@[0-9a-f]+)?":
$ref: "#/definitions/dai"
additionalProperties: false
required:
- compatible
additionalProperties: false
examples:
#--------------------
# single DAI link
#--------------------
- |
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "VF610-Tower-Sound-Card";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&dailink0_master>;
simple-audio-card,frame-master = <&dailink0_master>;
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "External Speaker";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Headphone Jack", "HP_OUT",
"External Speaker", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sh_fsi2 0>;
};
dailink0_master: simple-audio-card,codec {
sound-dai = <&ak4648>;
clocks = <&osc>;
};
};
#--------------------
# Multi DAI links
#--------------------
- |
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "Cubox Audio";
#address-cells = <1>;
#size-cells = <0>;
simple-audio-card,dai-link@0 { /* I2S - HDMI */
reg = <0>;
format = "i2s";
cpu {
sound-dai = <&audio0>;
};
codec {
sound-dai = <&tda998x0>;
};
};
simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */
reg = <1>;
cpu {
sound-dai = <&audio1>;
};
codec {
sound-dai = <&tda998x1>;
};
};
simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */
reg = <2>;
cpu {
sound-dai = <&audio2>;
};
codec {
sound-dai = <&spdif_codec>;
};
};
};
#--------------------
# route audio from IMX6 SSI2 through TLV320DAC3100 codec
# through TPA6130A2 amplifier to headphones:
#--------------------
- |
sound {
compatible = "simple-audio-card";
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HPLEFT",
"Headphone Jack", "HPRIGHT",
"LEFTIN", "HPL",
"RIGHTIN", "HPR";
simple-audio-card,aux-devs = <&amp>;
simple-audio-card,cpu {
sound-dai = <&ssi2>;
};
simple-audio-card,codec {
sound-dai = <&codec>;
clocks = <&clocks>;
};
};
#--------------------
# Sampling Rate Conversion
#--------------------
- |
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4643";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcodec>;
simple-audio-card,frame-master = <&sndcodec>;
simple-audio-card,convert-rate = <48000>;
simple-audio-card,prefix = "ak4642";
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"DAI0 Capture", "ak4642 Capture";
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
system-clock-frequency = <11289600>;
};
};
#--------------------
# 2 CPU 1 Codec (Mixing)
#--------------------
- |
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4643";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&dpcmcpu>;
simple-audio-card,frame-master = <&dpcmcpu>;
simple-audio-card,convert-rate = <48000>;
simple-audio-card,convert-channels = <2>;
simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
"ak4642 Playback", "DAI1 Playback";
dpcmcpu: simple-audio-card,cpu@0 {
sound-dai = <&rcar_sound 0>;
};
simple-audio-card,cpu@1 {
sound-dai = <&rcar_sound 1>;
};
simple-audio-card,codec {
prefix = "ak4642";
sound-dai = <&ak4643>;
clocks = <&audio_clock>;
};
};
#--------------------
# Multi DAI links with DPCM:
#
# CPU0 ------ ak4613
# CPU1 ------ PCM3168A-p /* DPCM 1ch/2ch */
# CPU2 --/ /* DPCM 3ch/4ch */
# CPU3 --/ /* DPCM 5ch/6ch */
# CPU4 --/ /* DPCM 7ch/8ch */
# CPU5 ------ PCM3168A-c
#--------------------
- |
sound {
compatible = "simple-audio-card";
simple-audio-card,routing =
"pcm3168a Playback", "DAI1 Playback",
"pcm3168a Playback", "DAI2 Playback",
"pcm3168a Playback", "DAI3 Playback",
"pcm3168a Playback", "DAI4 Playback";
simple-audio-card,dai-link@0 {
format = "left_j";
bitclock-master = <&sndcpu0>;
frame-master = <&sndcpu0>;
sndcpu0: cpu {
sound-dai = <&rcar_sound 0>;
};
codec {
sound-dai = <&ak4613>;
};
};
simple-audio-card,dai-link@1 {
format = "i2s";
bitclock-master = <&sndcpu1>;
frame-master = <&sndcpu1>;
convert-channels = <8>; /* TDM Split */
sndcpu1: cpu@0 {
sound-dai = <&rcar_sound 1>;
};
cpu@1 {
sound-dai = <&rcar_sound 2>;
};
cpu@2 {
sound-dai = <&rcar_sound 3>;
};
cpu@3 {
sound-dai = <&rcar_sound 4>;
};
codec {
mclk-fs = <512>;
prefix = "pcm3168a";
dai-tdm-slot-num = <8>;
sound-dai = <&pcm3168a 0>;
};
};
simple-audio-card,dai-link@2 {
format = "i2s";
bitclock-master = <&sndcpu2>;
frame-master = <&sndcpu2>;
sndcpu2: cpu {
sound-dai = <&rcar_sound 5>;
};
codec {
mclk-fs = <512>;
prefix = "pcm3168a";
sound-dai = <&pcm3168a 1>;
};
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7