riscv: dts: microchip: move timebase-frequency to mpfs.dtsi

The timebase-frequency on PolarFire SoC is not set by an oscillator on
the board, but rather by an internal divider, so move the property to
mpfs.dtsi.

This looks to be copy-pasta from the SiFive Unleashed as the comments
in both places were almost identical. In the Unleashed's case this looks
to actually be valid, as the clock is provided by a crystal on the PCB.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
CC: Conor Dooley <conor.dooley@microchip.com>
CC: Daire McNamara <daire.mcnamara@microchip.com>
CC: Rob Herring <robh+dt@kernel.org>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
CC: Paul Walmsley <paul.walmsley@sifive.com>
CC: Palmer Dabbelt <palmer@dabbelt.com>
CC: linux-riscv@lists.infradead.org
CC: devicetree@vger.kernel.org

arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts

@@ -8,9 +8,6 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define RTCCLK_FREQ		1000000
-
 / {
 	model = "Microchip PolarFire-SoC Icicle Kit";
 	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
@@ -29,10 +26,6 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 
-	cpus {
-		timebase-frequency = <RTCCLK_FREQ>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 

arch/riscv/boot/dts/microchip/mpfs-m100pfsevp.dts

@@ -10,9 +10,6 @@
 #include "mpfs.dtsi"
 #include "mpfs-m100pfs-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ	1000000
-
 / {
 	model = "Aries Embedded M100PFEVPS";
 	compatible = "aries,m100pfsevp", "microchip,mpfs";
@@ -33,10 +30,6 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
-	};
-
 	ddrc_cache_lo: memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x40000000>;

arch/riscv/boot/dts/microchip/mpfs-polarberry.dts

@@ -6,9 +6,6 @@
 #include "mpfs.dtsi"
 #include "mpfs-polarberry-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ	1000000
-
 / {
 	model = "Sundance PolarBerry";
 	compatible = "sundance,polarberry", "microchip,mpfs";
@@ -22,10 +19,6 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
-	};
-
 	ddrc_cache_lo: memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x2e000000>;

arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts

@@ -6,9 +6,6 @@
 #include "mpfs.dtsi"
 #include "mpfs-sev-kit-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ		1000000
-
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -28,10 +25,6 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
-	};
-
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;

arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts

@@ -11,9 +11,6 @@
 #include "mpfs.dtsi"
 #include "mpfs-tysom-m-fabric.dtsi"
 
-/* Clock frequency (in Hz) of the rtcclk */
-#define MTIMER_FREQ		1000000
-
 / {
 	model = "Aldec TySOM-M-MPFS250T-REV2";
 	compatible = "aldec,tysom-m-mpfs250t-rev2", "microchip,mpfs";
@@ -34,10 +31,6 @@ chosen {
 		stdout-path = "serial1:115200n8";
 	};
 
-	cpus {
-		timebase-frequency = <MTIMER_FREQ>;
-	};
-
 	ddrc_cache_lo: memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x30000000>;

arch/riscv/boot/dts/microchip/mpfs.dtsi

@@ -13,6 +13,7 @@ / {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		timebase-frequency = <1000000>;
 
 		cpu0: cpu@0 {
 			compatible = "sifive,e51", "sifive,rocket0", "riscv";