drm/amd/display: Revert fixup DPP programming sequence

[WHY]
This change was made because DTO programming was double-buffered, which
is itself an issue. After deactivating the DTO double buffer, this
change becomes unnecessary.
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/clk_mgr/dcn20/dcn20_clk_mgr.c

@@ -104,6 +104,7 @@ void dcn20_update_clocks_update_dpp_dto(struct clk_mgr_internal *clk_mgr,
 {
 	int i;
 
+	clk_mgr->dccg->ref_dppclk = clk_mgr->base.clks.dppclk_khz;
 	for (i = 0; i < clk_mgr->base.ctx->dc->res_pool->pipe_count; i++) {
 		int dpp_inst, dppclk_khz;
 
@@ -113,75 +114,28 @@ void dcn20_update_clocks_update_dpp_dto(struct clk_mgr_internal *clk_mgr,
 		dpp_inst = context->res_ctx.pipe_ctx[i].plane_res.dpp->inst;
 		dppclk_khz = context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz;
 		clk_mgr->dccg->funcs->update_dpp_dto(
-				clk_mgr->dccg, dpp_inst, dppclk_khz, false);
+				clk_mgr->dccg, dpp_inst, dppclk_khz);
 	}
 }
 
-static void update_global_dpp_clk(struct clk_mgr_internal *clk_mgr, unsigned int khz)
+void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr)
 {
 	int dpp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-			* clk_mgr->dentist_vco_freq_khz / khz;
-
-	uint32_t dppclk_wdivider = dentist_get_did_from_divider(dpp_divider);
-
-	REG_UPDATE(DENTIST_DISPCLK_CNTL,
-			DENTIST_DPPCLK_WDIVIDER, dppclk_wdivider);
-	REG_WAIT(DENTIST_DISPCLK_CNTL, DENTIST_DPPCLK_CHG_DONE, 1, 5, 100);
-}
-
-static void update_display_clk(struct clk_mgr_internal *clk_mgr, unsigned int khz)
-{
+			* clk_mgr->dentist_vco_freq_khz / clk_mgr->base.clks.dppclk_khz;
 	int disp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
-			* clk_mgr->dentist_vco_freq_khz / khz;
+			* clk_mgr->dentist_vco_freq_khz / clk_mgr->base.clks.dispclk_khz;
 
+	uint32_t dppclk_wdivider = dentist_get_did_from_divider(dpp_divider);
 	uint32_t dispclk_wdivider = dentist_get_did_from_divider(disp_divider);
 
 	REG_UPDATE(DENTIST_DISPCLK_CNTL,
 			DENTIST_DISPCLK_WDIVIDER, dispclk_wdivider);
+//	REG_WAIT(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_CHG_DONE, 1, 5, 100);
+	REG_UPDATE(DENTIST_DISPCLK_CNTL,
+			DENTIST_DPPCLK_WDIVIDER, dppclk_wdivider);
+	REG_WAIT(DENTIST_DISPCLK_CNTL, DENTIST_DPPCLK_CHG_DONE, 1, 5, 100);
 }
 
-static void request_voltage_and_program_disp_clk(struct clk_mgr *clk_mgr_base, unsigned int khz)
-{
-	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
-	struct dc *dc = clk_mgr_base->ctx->dc;
-	struct pp_smu_funcs_nv *pp_smu = NULL;
-	bool going_up = clk_mgr->base.clks.dispclk_khz < khz;
-
-	if (dc->res_pool->pp_smu)
-		pp_smu = &dc->res_pool->pp_smu->nv_funcs;
-
-	clk_mgr->base.clks.dispclk_khz = khz;
-
-	if (going_up && pp_smu && pp_smu->set_voltage_by_freq)
-		pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_DISPCLK, clk_mgr_base->clks.dispclk_khz / 1000);
-
-	update_display_clk(clk_mgr, khz);
-
-	if (!going_up && pp_smu && pp_smu->set_voltage_by_freq)
-		pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_DISPCLK, clk_mgr_base->clks.dispclk_khz / 1000);
-}
-
-static void request_voltage_and_program_global_dpp_clk(struct clk_mgr *clk_mgr_base, unsigned int khz)
-{
-	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
-	struct dc *dc = clk_mgr_base->ctx->dc;
-	struct pp_smu_funcs_nv *pp_smu = NULL;
-	bool going_up = clk_mgr->base.clks.dppclk_khz < khz;
-
-	if (dc->res_pool->pp_smu)
-		pp_smu = &dc->res_pool->pp_smu->nv_funcs;
-
-	clk_mgr->base.clks.dppclk_khz = khz;
-	clk_mgr->dccg->ref_dppclk = khz;
-
-	if (going_up && pp_smu && pp_smu->set_voltage_by_freq)
-		pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_PIXELCLK, clk_mgr_base->clks.dppclk_khz / 1000);
-
-	update_global_dpp_clk(clk_mgr, khz);
-
-	if (!going_up && pp_smu && pp_smu->set_voltage_by_freq)
-		pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_PIXELCLK, clk_mgr_base->clks.dppclk_khz / 1000);
-}
 
 void dcn2_update_clocks(struct clk_mgr *clk_mgr_base,
 			struct dc_state *context,
@@ -192,8 +146,10 @@ void dcn2_update_clocks(struct clk_mgr *clk_mgr_base,
 	struct dc *dc = clk_mgr_base->ctx->dc;
 	struct pp_smu_funcs_nv *pp_smu = NULL;
 	int display_count;
+	bool update_dppclk = false;
 	bool update_dispclk = false;
 	bool enter_display_off = false;
+	bool dpp_clock_lowered = false;
 	struct dmcu *dmcu = clk_mgr_base->ctx->dc->res_pool->dmcu;
 	bool force_reset = false;
 
@@ -250,12 +206,10 @@ void dcn2_update_clocks(struct clk_mgr *clk_mgr_base,
 
 	if (should_update_pstate_support(safe_to_lower, new_clocks->p_state_change_support, clk_mgr_base->clks.p_state_change_support)) {
 		clk_mgr_base->clks.prev_p_state_change_support = clk_mgr_base->clks.p_state_change_support;
-
 		clk_mgr_base->clks.p_state_change_support = new_clocks->p_state_change_support;
 		if (pp_smu && pp_smu->set_pstate_handshake_support)
 			pp_smu->set_pstate_handshake_support(&pp_smu->pp_smu, clk_mgr_base->clks.p_state_change_support);
 	}
-	clk_mgr_base->clks.prev_p_state_change_support = clk_mgr_base->clks.p_state_change_support;
 
 	if (should_set_clock(safe_to_lower, new_clocks->dramclk_khz, clk_mgr_base->clks.dramclk_khz)) {
 		clk_mgr_base->clks.dramclk_khz = new_clocks->dramclk_khz;
@@ -263,28 +217,35 @@ void dcn2_update_clocks(struct clk_mgr *clk_mgr_base,
 			pp_smu->set_hard_min_uclk_by_freq(&pp_smu->pp_smu, clk_mgr_base->clks.dramclk_khz / 1000);
 	}
 
-	if (dc->config.forced_clocks == false) {
-		// First update display clock
-		if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz))
-			request_voltage_and_program_disp_clk(clk_mgr_base, new_clocks->dispclk_khz);
+	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->base.clks.dppclk_khz)) {
+		if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz)
+			dpp_clock_lowered = true;
+		clk_mgr->base.clks.dppclk_khz = new_clocks->dppclk_khz;
 
-		// Updating DPP clock requires some more logic
-		if (!safe_to_lower) {
-			// For pre-programming, we need to make sure any DPP clock that will go up has to go up
+		if (pp_smu && pp_smu->set_voltage_by_freq)
+			pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_PIXELCLK, clk_mgr_base->clks.dppclk_khz / 1000);
 
-			// First raise the global reference if needed
-			if (new_clocks->dppclk_khz > clk_mgr_base->clks.dppclk_khz)
-				request_voltage_and_program_global_dpp_clk(clk_mgr_base, new_clocks->dppclk_khz);
+		update_dppclk = true;
+	}
 
-			// Then raise any dividers that need raising
-			dcn20_update_clocks_update_dpp_dto(clk_mgr, context);
-		} else {
-			// For post-programming, we can lower ref clk if needed, and unconditionally set all the DTOs
+	if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) {
+		clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz;
+		if (pp_smu && pp_smu->set_voltage_by_freq)
+			pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_DISPCLK, clk_mgr_base->clks.dispclk_khz / 1000);
 
-			if (new_clocks->dppclk_khz < clk_mgr_base->clks.dppclk_khz)
-				request_voltage_and_program_global_dpp_clk(clk_mgr_base, new_clocks->dppclk_khz);
+		update_dispclk = true;
+	}
+	if (dc->config.forced_clocks == false || (force_reset && safe_to_lower)) {
+		if (dpp_clock_lowered) {
+			// if clock is being lowered, increase DTO before lowering refclk
 			dcn20_update_clocks_update_dpp_dto(clk_mgr, context);
-
+			dcn20_update_clocks_update_dentist(clk_mgr);
+		} else {
+			// if clock is being raised, increase refclk before lowering DTO
+			if (update_dppclk || update_dispclk)
+				dcn20_update_clocks_update_dentist(clk_mgr);
+			if (update_dppclk)
+				dcn20_update_clocks_update_dpp_dto(clk_mgr, context);
 		}
 	}
 	if (update_dispclk &&

drivers/gpu/drm/amd/display/dc/core/dc.c

@@ -1646,9 +1646,6 @@ enum surface_update_type dc_check_update_surfaces_for_stream(
 			updates[i].surface->update_flags.raw = 0xFFFFFFFF;
 	}
 
-	if (type == UPDATE_TYPE_FAST && memcmp(&dc->current_state->bw_ctx.bw.dcn.clk, &dc->clk_mgr->clks, offsetof(struct dc_clocks, prev_p_state_change_support)) != 0)
-		dc->optimized_required = true;
-
 	return type;
 }
 

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -2304,8 +2304,7 @@ void update_dchubp_dpp(
 			dc->res_pool->dccg->funcs->update_dpp_dto(
 					dc->res_pool->dccg,
 					dpp->inst,
-					pipe_ctx->plane_res.bw.dppclk_khz,
-					false);
+					pipe_ctx->plane_res.bw.dppclk_khz);
 		else
 			dc->clk_mgr->clks.dppclk_khz = should_divided_by_2 ?
 						dc->clk_mgr->clks.dispclk_khz / 2 :

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.c

@@ -44,16 +44,12 @@
 #define DC_LOGGER \
 	dccg->ctx->logger
 
-void dccg2_update_dpp_dto(struct dccg *dccg,
-		int dpp_inst,
-		int req_dppclk,
-		bool reduce_divider_only)
+void dccg2_update_dpp_dto(struct dccg *dccg, int dpp_inst, int req_dppclk)
 {
 	struct dcn_dccg *dccg_dcn = TO_DCN_DCCG(dccg);
 
 	if (dccg->ref_dppclk && req_dppclk) {
 		int ref_dppclk = dccg->ref_dppclk;
-		int current_phase, current_modulo;
 
 		ASSERT(req_dppclk <= ref_dppclk);
 		/* need to clamp to 8 bits */
@@ -65,28 +61,9 @@ void dccg2_update_dpp_dto(struct dccg *dccg,
 			if (req_dppclk > ref_dppclk)
 				req_dppclk = ref_dppclk;
 		}
-
-		REG_GET_2(DPPCLK_DTO_PARAM[dpp_inst],
-				DPPCLK0_DTO_PHASE, &current_phase,
-				DPPCLK0_DTO_MODULO, &current_modulo);
-
-		if (reduce_divider_only) {
-			// requested phase/modulo greater than current
-			if (req_dppclk * current_modulo >= current_phase * ref_dppclk) {
-				REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0,
-						DPPCLK0_DTO_PHASE, req_dppclk,
-						DPPCLK0_DTO_MODULO, ref_dppclk);
-			} else {
-				REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0,
-						DPPCLK0_DTO_PHASE, current_phase,
-						DPPCLK0_DTO_MODULO, current_modulo);
-			}
-		} else {
-			REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0,
-					DPPCLK0_DTO_PHASE, req_dppclk,
-					DPPCLK0_DTO_MODULO, ref_dppclk);
-		}
-
+		REG_SET_2(DPPCLK_DTO_PARAM[dpp_inst], 0,
+				DPPCLK0_DTO_PHASE, req_dppclk,
+				DPPCLK0_DTO_MODULO, ref_dppclk);
 		REG_UPDATE(DPPCLK_DTO_CTRL,
 				DPPCLK_DTO_ENABLE[dpp_inst], 1);
 	} else {

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_dccg.h

@@ -97,7 +97,7 @@ struct dcn_dccg {
 	const struct dccg_mask *dccg_mask;
 };
 
-void dccg2_update_dpp_dto(struct dccg *dccg, int dpp_inst, int req_dppclk, bool raise_divider_only);
+void dccg2_update_dpp_dto(struct dccg *dccg, int dpp_inst, int req_dppclk);
 
 void dccg2_get_dccg_ref_freq(struct dccg *dccg,
 		unsigned int xtalin_freq_inKhz,

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c

@@ -1208,8 +1208,7 @@ static void dcn20_update_dchubp_dpp(
 		dc->res_pool->dccg->funcs->update_dpp_dto(
 				dc->res_pool->dccg,
 				dpp->inst,
-				pipe_ctx->plane_res.bw.dppclk_khz,
-				false);
+				pipe_ctx->plane_res.bw.dppclk_khz);
 	}
 
 	/* TODO: Need input parameter to tell current DCHUB pipe tie to which OTG

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c

@@ -2624,7 +2624,7 @@ void dcn20_calculate_dlg_params(
 	context->bw_ctx.bw.dcn.clk.socclk_khz = context->bw_ctx.dml.vba.SOCCLK * 1000;
 	context->bw_ctx.bw.dcn.clk.dramclk_khz = context->bw_ctx.dml.vba.DRAMSpeed * 1000 / 16;
 	context->bw_ctx.bw.dcn.clk.dcfclk_deep_sleep_khz = context->bw_ctx.dml.vba.DCFCLKDeepSleep * 1000;
-	context->bw_ctx.bw.dcn.clk.fclk_khz = 0;
+	context->bw_ctx.bw.dcn.clk.fclk_khz = context->bw_ctx.dml.vba.FabricClock * 1000;
 	context->bw_ctx.bw.dcn.clk.p_state_change_support =
 		context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb]
 							!= dm_dram_clock_change_unsupported;

drivers/gpu/drm/amd/display/dc/inc/core_types.h

@@ -231,6 +231,7 @@ struct resource_pool {
 
 struct dcn_fe_bandwidth {
 	int dppclk_khz;
+
 };
 
 struct stream_resource {

drivers/gpu/drm/amd/display/dc/inc/hw/clk_mgr_internal.h

@@ -281,14 +281,8 @@ static inline bool should_set_clock(bool safe_to_lower, int calc_clk, int cur_cl
 
 static inline bool should_update_pstate_support(bool safe_to_lower, bool calc_support, bool cur_support)
 {
-	if (cur_support != calc_support) {
-		if (calc_support == true && safe_to_lower)
-			return true;
-		else if (calc_support == false && !safe_to_lower)
-			return true;
-	}
-
-	return false;
+	// Whenever we are transitioning pstate support, we always want to notify prior to committing state
+	return (calc_support != cur_support) ? !safe_to_lower : false;
 }
 
 int clk_mgr_helper_get_active_display_cnt(

drivers/gpu/drm/amd/display/dc/inc/hw/dccg.h

@@ -38,8 +38,7 @@ struct dccg {
 struct dccg_funcs {
 	void (*update_dpp_dto)(struct dccg *dccg,
 			int dpp_inst,
-			int req_dppclk,
-			bool reduce_divider_only);
+			int req_dppclk);
 	void (*get_dccg_ref_freq)(struct dccg *dccg,
 			unsigned int xtalin_freq_inKhz,
 			unsigned int *dccg_ref_freq_inKhz);