Merge branch 'devel-gpio' into omap-for-linus

arch/arm/mach-omap1/Makefile

@@ -49,6 +49,12 @@ ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
 endif
 
+# GPIO
+obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
+obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
+
 # LEDs support
 led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o

arch/arm/mach-omap1/board-ams-delta.c

@@ -141,7 +141,6 @@ static void __init ams_delta_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct map_desc ams_delta_io_desc[] __initdata = {

arch/arm/mach-omap1/board-fsample.c

@@ -120,6 +120,15 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static void __init fsample_init_smc91x(void)
+{
+	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
 static struct mtd_partition nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -285,6 +294,8 @@ static struct omap_board_config_kernel fsample_config[] = {
 
 static void __init omap_fsample_init(void)
 {
+	fsample_init_smc91x();
+
 	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
 	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
@@ -312,21 +323,10 @@ static void __init omap_fsample_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init fsample_init_smc91x(void)
-{
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
 static void __init omap_fsample_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	fsample_init_smc91x();
 }
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */

arch/arm/mach-omap1/board-h2.c

@@ -374,8 +374,6 @@ static void __init h2_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	h2_init_smc91x();
 }
 
 static struct omap_usb_config h2_usb_config __initdata = {
@@ -403,6 +401,8 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 static void __init h2_init(void)
 {
+	h2_init_smc91x();
+
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 	 * notice whether a NAND chip is enabled at probe time.

arch/arm/mach-omap1/board-h3.c

@@ -264,6 +264,15 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static void __init h3_init_smc91x(void)
+{
+	omap_cfg_reg(W15_1710_GPIO40);
+	if (gpio_request(40, "SMC91x irq") < 0) {
+		printk("Error requesting gpio 40 for smc91x irq\n");
+		return;
+	}
+}
+
 #define GPTIMER_BASE		0xFFFB1400
 #define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
 #define GPTIMER_REGS_SIZE	0x46
@@ -376,6 +385,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 
 static void __init h3_init(void)
 {
+	h3_init_smc91x();
+
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 	 * notice whether a NAND chip is enabled at probe time.
@@ -422,21 +433,10 @@ static void __init h3_init(void)
 	h3_mmc_init();
 }
 
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
 static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	h3_init_smc91x();
 }
 
 static void __init h3_map_io(void)

arch/arm/mach-omap1/board-htcherald.c

@@ -577,8 +577,6 @@ static void __init htcherald_init(void)
 	printk(KERN_INFO "HTC Herald init.\n");
 
 	/* Do board initialization before we register all the devices */
-	omap_gpio_init();
-
 	omap_board_config = htcherald_config;
 	omap_board_config_size = ARRAY_SIZE(htcherald_config);
 	platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-omap1/board-innovator.c

@@ -290,13 +290,11 @@ static void __init innovator_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1510_fpga_init_irq();
 	}
 #endif
-	innovator_init_smc91x();
 }
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -387,6 +385,8 @@ static struct omap_board_config_kernel innovator_config[] = {
 
 static void __init innovator_init(void)
 {
+	innovator_init_smc91x();
+
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		unsigned char reg;

arch/arm/mach-omap1/board-nokia770.c

@@ -246,7 +246,6 @@ static void __init omap_nokia770_init(void)
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
-	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	hwa742_dev_init();

arch/arm/mach-omap1/board-osk.c

@@ -283,9 +283,6 @@ static void __init osk_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	osk_init_smc91x();
-	osk_init_cf();
 }
 
 static struct omap_usb_config osk_usb_config __initdata = {
@@ -541,6 +538,9 @@ static void __init osk_init(void)
 {
 	u32 l;
 
+	osk_init_smc91x();
+	osk_init_cf();
+
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
 	 * wrong CS3 memory timings. This mainly leads to CRC

arch/arm/mach-omap1/board-palmte.c

@@ -63,7 +63,6 @@ static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static const int palmte_keymap[] = {

arch/arm/mach-omap1/board-palmz71.c

@@ -62,7 +62,6 @@ omap_palmz71_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static int palmz71_keymap[] = {

arch/arm/mach-omap1/board-perseus2.c

@@ -251,8 +251,19 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
 };
 
+static void __init perseus2_init_smc91x(void)
+{
+	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
 static void __init omap_perseus2_init(void)
 {
+	perseus2_init_smc91x();
+
 	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
 	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
@@ -280,21 +291,10 @@ static void __init omap_perseus2_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init perseus2_init_smc91x(void)
-{
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
 static void __init omap_perseus2_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	perseus2_init_smc91x();
 }
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {

arch/arm/mach-omap1/board-sx1.c

@@ -409,7 +409,6 @@ static void __init omap_sx1_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 /*----------------------------------------*/
 

arch/arm/mach-omap1/board-voiceblue.c

@@ -161,7 +161,6 @@ static void __init voiceblue_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static void __init voiceblue_init(void)

arch/arm/mach-omap1/clock_data.c

@@ -143,7 +143,7 @@ static struct arm_idlect1_clk armper_ck = {
  * activation.  [ GPIO code for 1510 ]
  */
 static struct clk arm_gpio_ck = {
-	.name		= "arm_gpio_ck",
+	.name		= "ick",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
 	.flags		= ENABLE_ON_INIT,
@@ -684,7 +684,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
 	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
+	CLK("omap_gpio.0", "ick",	&arm_gpio_ck,	CK_1510 | CK_310),
 	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),

arch/arm/mach-omap1/gpio15xx.c

+/*
+ * OMAP15xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+#define OMAP1510_GPIO_BASE		0xFFFCE000
+
+/* gpio1 */
+static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
+	.virtual_irq_start	= IH_MPUIO_BASE,
+	.bank_type		= METHOD_MPUIO,
+	.bank_width		= 16,
+	.bank_stride		= 1,
+};
+
+static struct __initdata platform_device omap15xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap15xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap15xx_mpu_gpio_resources),
+	.resource = omap15xx_mpu_gpio_resources,
+};
+
+/* gpio2 */
+static struct __initdata resource omap15xx_gpio_resources[] = {
+	{
+		.start	= OMAP1510_GPIO_BASE,
+		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
+	.virtual_irq_start	= IH_GPIO_BASE,
+	.bank_type		= METHOD_GPIO_1510,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap15xx_gpio = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap15xx_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap15xx_gpio_resources),
+	.resource = omap15xx_gpio_resources,
+};
+
+/*
+ * omap15xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap15xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap15xx_gpio_init(void)
+{
+	if (!cpu_is_omap15xx())
+		return -EINVAL;
+
+	platform_device_register(&omap15xx_mpu_gpio);
+	platform_device_register(&omap15xx_gpio);
+
+	gpio_bank_count = 2;
+	return 0;
+}
+postcore_initcall(omap15xx_gpio_init);

arch/arm/mach-omap1/gpio16xx.c

+/*
+ * OMAP16xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+
+#define OMAP1610_GPIO1_BASE		0xfffbe400
+#define OMAP1610_GPIO2_BASE		0xfffbec00
+#define OMAP1610_GPIO3_BASE		0xfffbb400
+#define OMAP1610_GPIO4_BASE		0xfffbbc00
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+
+/* mpu gpio */
+static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
+	.virtual_irq_start	= IH_MPUIO_BASE,
+	.bank_type		= METHOD_MPUIO,
+	.bank_width		= 16,
+	.bank_stride		= 1,
+};
+
+static struct __initdata platform_device omap16xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap16xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources),
+	.resource = omap16xx_mpu_gpio_resources,
+};
+
+/* gpio1 */
+static struct __initdata resource omap16xx_gpio1_resources[] = {
+	{
+		.start	= OMAP1610_GPIO1_BASE,
+		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
+	.virtual_irq_start	= IH_GPIO_BASE,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio1 = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap16xx_gpio1_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio1_resources),
+	.resource = omap16xx_gpio1_resources,
+};
+
+/* gpio2 */
+static struct __initdata resource omap16xx_gpio2_resources[] = {
+	{
+		.start	= OMAP1610_GPIO2_BASE,
+		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 16,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio2 = {
+	.name           = "omap_gpio",
+	.id             = 2,
+	.dev            = {
+		.platform_data = &omap16xx_gpio2_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio2_resources),
+	.resource = omap16xx_gpio2_resources,
+};
+
+/* gpio3 */
+static struct __initdata resource omap16xx_gpio3_resources[] = {
+	{
+		.start	= OMAP1610_GPIO3_BASE,
+		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 32,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio3 = {
+	.name           = "omap_gpio",
+	.id             = 3,
+	.dev            = {
+		.platform_data = &omap16xx_gpio3_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio3_resources),
+	.resource = omap16xx_gpio3_resources,
+};
+
+/* gpio4 */
+static struct __initdata resource omap16xx_gpio4_resources[] = {
+	{
+		.start	= OMAP1610_GPIO4_BASE,
+		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 48,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio4 = {
+	.name           = "omap_gpio",
+	.id             = 4,
+	.dev            = {
+		.platform_data = &omap16xx_gpio4_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio4_resources),
+	.resource = omap16xx_gpio4_resources,
+};
+
+static struct __initdata platform_device * omap16xx_gpio_dev[] = {
+	&omap16xx_mpu_gpio,
+	&omap16xx_gpio1,
+	&omap16xx_gpio2,
+	&omap16xx_gpio3,
+	&omap16xx_gpio4,
+};
+
+/*
+ * omap16xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap16xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap16xx_gpio_init(void)
+{
+	int i;
+
+	if (!cpu_is_omap16xx())
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
+		platform_device_register(omap16xx_gpio_dev[i]);
+
+	gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev);
+
+	return 0;
+}
+postcore_initcall(omap16xx_gpio_init);

arch/arm/mach-omap1/gpio7xx.c

+/*
+ * OMAP7xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+
+#define OMAP7XX_GPIO1_BASE		0xfffbc000
+#define OMAP7XX_GPIO2_BASE		0xfffbc800
+#define OMAP7XX_GPIO3_BASE		0xfffbd000
+#define OMAP7XX_GPIO4_BASE		0xfffbd800
+#define OMAP7XX_GPIO5_BASE		0xfffbe000
+#define OMAP7XX_GPIO6_BASE		0xfffbe800
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+
+/* mpu gpio */
+static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+	.virtual_irq_start	= IH_MPUIO_BASE,
+	.bank_type		= METHOD_MPUIO,
+	.bank_width		= 32,
+	.bank_stride		= 2,
+};
+
+static struct __initdata platform_device omap7xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap7xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
+	.resource = omap7xx_mpu_gpio_resources,
+};
+
+/* gpio1 */
+static struct __initdata resource omap7xx_gpio1_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO1_BASE,
+		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
+	.virtual_irq_start	= IH_GPIO_BASE,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio1 = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap7xx_gpio1_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
+	.resource = omap7xx_gpio1_resources,
+};
+
+/* gpio2 */
+static struct __initdata resource omap7xx_gpio2_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO2_BASE,
+		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 32,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio2 = {
+	.name           = "omap_gpio",
+	.id             = 2,
+	.dev            = {
+		.platform_data = &omap7xx_gpio2_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
+	.resource = omap7xx_gpio2_resources,
+};
+
+/* gpio3 */
+static struct __initdata resource omap7xx_gpio3_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO3_BASE,
+		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 64,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio3 = {
+	.name           = "omap_gpio",
+	.id             = 3,
+	.dev            = {
+		.platform_data = &omap7xx_gpio3_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
+	.resource = omap7xx_gpio3_resources,
+};
+
+/* gpio4 */
+static struct __initdata resource omap7xx_gpio4_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO4_BASE,
+		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 96,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio4 = {
+	.name           = "omap_gpio",
+	.id             = 4,
+	.dev            = {
+		.platform_data = &omap7xx_gpio4_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
+	.resource = omap7xx_gpio4_resources,
+};
+
+/* gpio5 */
+static struct __initdata resource omap7xx_gpio5_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO5_BASE,
+		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 128,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio5 = {
+	.name           = "omap_gpio",
+	.id             = 5,
+	.dev            = {
+		.platform_data = &omap7xx_gpio5_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
+	.resource = omap7xx_gpio5_resources,
+};
+
+/* gpio6 */
+static struct __initdata resource omap7xx_gpio6_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO6_BASE,
+		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 160,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio6 = {
+	.name           = "omap_gpio",
+	.id             = 6,
+	.dev            = {
+		.platform_data = &omap7xx_gpio6_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
+	.resource = omap7xx_gpio6_resources,
+};
+
+static struct __initdata platform_device * omap7xx_gpio_dev[] = {
+	&omap7xx_mpu_gpio,
+	&omap7xx_gpio1,
+	&omap7xx_gpio2,
+	&omap7xx_gpio3,
+	&omap7xx_gpio4,
+	&omap7xx_gpio5,
+	&omap7xx_gpio6,
+};
+
+/*
+ * omap7xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap7xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap7xx_gpio_init(void)
+{
+	int i;
+
+	if (!cpu_is_omap7xx())
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
+		platform_device_register(omap7xx_gpio_dev[i]);
+
+	gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev);
+
+	return 0;
+}
+postcore_initcall(omap7xx_gpio_init);

arch/arm/mach-omap2/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
-	 common.o
+	 common.o gpio.o
 
 omap-2-3-common				= irq.o sdrc.o prm2xxx_3xxx.o
 hwmod-common				= omap_hwmod.o \

arch/arm/mach-omap2/board-2430sdp.c

@@ -145,7 +145,6 @@ static void __init omap_2430sdp_init_irq(void)
 	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {

arch/arm/mach-omap2/board-3430sdp.c

@@ -328,7 +328,6 @@ static void __init omap_3430sdp_init_irq(void)
 	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static int sdp3430_batt_table[] = {

arch/arm/mach-omap2/board-3630sdp.c

@@ -76,7 +76,6 @@ static void __init omap_sdp_init_irq(void)
 	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
 			h8mbx00u0mer0em_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/board-4430sdp.c

@@ -223,7 +223,6 @@ static void __init omap_4430sdp_init_irq(void)
 	omap2_gp_clockevent_set_gptimer(1);
 #endif
 	gic_init_irq();
-	omap_gpio_init();
 }
 
 static struct omap_musb_board_data musb_board_data = {

arch/arm/mach-omap2/board-am3517crane.c

@@ -19,7 +19,6 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -50,7 +49,6 @@ static void __init am3517_crane_init_irq(void)
 
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static void __init am3517_crane_init(void)

arch/arm/mach-omap2/board-am3517evm.c

@@ -392,7 +392,6 @@ static void __init am3517_evm_init_irq(void)
 
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct omap_musb_board_data musb_board_data = {

arch/arm/mach-omap2/board-apollon.c

@@ -280,8 +280,6 @@ static void __init omap_apollon_init_irq(void)
 	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
 }
 
 static void __init apollon_led_init(void)
@@ -322,6 +320,7 @@ static void __init omap_apollon_init(void)
 
 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 
+	apollon_init_smc91x();
 	apollon_led_init();
 	apollon_flash_init();
 	apollon_usb_init();

arch/arm/mach-omap2/board-cm-t35.c

@@ -686,7 +686,6 @@ static void __init cm_t35_init_irq(void)
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {

arch/arm/mach-omap2/board-cm-t3517.c

@@ -250,7 +250,6 @@ static void __init cm_t3517_init_irq(void)
 
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {

arch/arm/mach-omap2/board-devkit8000.c

@@ -450,7 +450,6 @@ static void __init devkit8000_init_irq(void)
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static void __init devkit8000_ads7846_init(void)

arch/arm/mach-omap2/board-h4.c

@@ -293,7 +293,6 @@ static void __init omap_h4_init_irq(void)
 	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 	h4_init_flash();
 }
 

arch/arm/mach-omap2/board-igep0020.c

@@ -484,7 +484,6 @@ static void __init igep2_init_irq(void)
 {
 	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct twl4030_codec_audio_data igep2_audio_data = {

arch/arm/mach-omap2/board-igep0030.c

@@ -291,7 +291,6 @@ static void __init igep3_init_irq(void)
 {
 	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct twl4030_platform_data igep3_twl4030_pdata = {

arch/arm/mach-omap2/board-ldp.c

@@ -294,8 +294,6 @@ static void __init omap_ldp_init_irq(void)
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
-	ldp_init_smsc911x();
 }
 
 static struct twl4030_usb_data ldp_usb_data = {
@@ -424,6 +422,7 @@ static struct mtd_partition ldp_nand_partitions[] = {
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	ldp_init_smsc911x();
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	ts_gpio = 54;

arch/arm/mach-omap2/board-n8x0.c

@@ -633,7 +633,6 @@ static void __init n8x0_init_irq(void)
 {
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/board-omap3beagle.c

@@ -490,7 +490,6 @@ static void __init omap3_beagle_init_irq(void)
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_beagle_devices[] __initdata = {

arch/arm/mach-omap2/board-omap3evm.c

@@ -625,7 +625,6 @@ static void __init omap3_evm_init_irq(void)
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {

arch/arm/mach-omap2/board-omap3logic.c

@@ -199,7 +199,6 @@ static void __init omap3logic_init_irq(void)
 {
 	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/board-omap3pandora.c

@@ -639,7 +639,6 @@ static void __init omap3pandora_init_irq(void)
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static void pandora_wl1251_set_power(bool enable)

arch/arm/mach-omap2/board-omap3stalker.c

@@ -589,7 +589,6 @@ static void __init omap3_stalker_init_irq(void)
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -426,7 +426,6 @@ static void __init omap3_touchbook_init_irq(void)
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_touchbook_devices[] __initdata = {

arch/arm/mach-omap2/board-omap4panda.c

@@ -79,7 +79,6 @@ static void __init omap4_panda_init_irq(void)
 {
 	omap2_init_common_hw(NULL, NULL);
 	gic_init_irq();
-	omap_gpio_init();
 }
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {

arch/arm/mach-omap2/board-overo.c

@@ -416,7 +416,6 @@ static void __init overo_init_irq(void)
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct platform_device *overo_devices[] __initdata = {

arch/arm/mach-omap2/board-rx51.c

@@ -108,7 +108,6 @@ static void __init rx51_init_irq(void)
 	sdrc_params = rx51_get_sdram_timings();
 	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 extern void __init rx51_peripherals_init(void);

arch/arm/mach-omap2/board-zoom.c

@@ -43,7 +43,6 @@ static void __init omap_zoom_init_irq(void)
 				h8mbx00u0mer0em_sdrc_params);
 
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/gpio.c

+/*
+ * OMAP2+ specific gpio initialization
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+
+static struct omap_device_pm_latency omap_gpio_latency[] = {
+	[0] = {
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
+{
+	struct omap_device *od;
+	struct omap_gpio_platform_data *pdata;
+	struct omap_gpio_dev_attr *dev_attr;
+	char *name = "omap_gpio";
+	int id;
+
+	/*
+	 * extract the device id from name field available in the
+	 * hwmod database and use the same for constructing ids for
+	 * gpio devices.
+	 * CAUTION: Make sure the name in the hwmod database does
+	 * not change. If changed, make corresponding change here
+	 * or make use of static variable mechanism to handle this.
+	 */
+	sscanf(oh->name, "gpio%d", &id);
+
+	pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("gpio%d: Memory allocation failed\n", id);
+		return -ENOMEM;
+	}
+
+	dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
+	pdata->bank_width = dev_attr->bank_width;
+	pdata->dbck_flag = dev_attr->dbck_flag;
+	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
+
+	switch (oh->class->rev) {
+	case 0:
+	case 1:
+		pdata->bank_type = METHOD_GPIO_24XX;
+		break;
+	case 2:
+		pdata->bank_type = METHOD_GPIO_44XX;
+		break;
+	default:
+		WARN(1, "Invalid gpio bank_type\n");
+		kfree(pdata);
+		return -EINVAL;
+	}
+
+	od = omap_device_build(name, id - 1, oh, pdata,
+				sizeof(*pdata),	omap_gpio_latency,
+				ARRAY_SIZE(omap_gpio_latency),
+				false);
+	kfree(pdata);
+
+	if (IS_ERR(od)) {
+		WARN(1, "Cant build omap_device for %s:%s.\n",
+					name, oh->name);
+		return PTR_ERR(od);
+	}
+
+	gpio_bank_count++;
+	return 0;
+}
+
+/*
+ * gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence gpio_init is a postcore_initcall.
+ */
+static int __init omap2_gpio_init(void)
+{
+	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init,
+						NULL);
+}
+postcore_initcall(omap2_gpio_init);

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -17,7 +17,7 @@
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/omap24xx.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -38,6 +38,10 @@ static struct omap_hwmod omap2420_iva_hwmod;
 static struct omap_hwmod omap2420_l3_main_hwmod;
 static struct omap_hwmod omap2420_l4_core_hwmod;
 static struct omap_hwmod omap2420_wd_timer2_hwmod;
+static struct omap_hwmod omap2420_gpio1_hwmod;
+static struct omap_hwmod omap2420_gpio2_hwmod;
+static struct omap_hwmod omap2420_gpio3_hwmod;
+static struct omap_hwmod omap2420_gpio4_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
@@ -557,6 +561,224 @@ static struct omap_hwmod omap2420_i2c2_hwmod = {
 	.flags		= HWMOD_16BIT_REG,
 };
 
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
+	{
+		.pa_start	= 0x48018000,
+		.pa_end		= 0x480181ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio1_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio2 */
+static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
+	{
+		.pa_start	= 0x4801a000,
+		.pa_end		= 0x4801a1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio2_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio3 */
+static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
+	{
+		.pa_start	= 0x4801c000,
+		.pa_end		= 0x4801c1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio3_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio4 */
+static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
+	{
+		.pa_start	= 0x4801e000,
+		.pa_end		= 0x4801e1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio4_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = false,
+};
+
+static struct omap_hwmod_class_sysconfig omap242x_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+static struct omap_hwmod_class omap242x_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap242x_gpio_sysc,
+	.rev = 0,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap242x_gpio1_irqs[] = {
+	{ .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
+	&omap2420_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap2420_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap242x_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio1_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap242x_gpio2_irqs[] = {
+	{ .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
+	&omap2420_l4_wkup__gpio2,
+};
+
+static struct omap_hwmod omap2420_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap242x_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio2_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap242x_gpio3_irqs[] = {
+	{ .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
+	&omap2420_l4_wkup__gpio3,
+};
+
+static struct omap_hwmod omap2420_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap242x_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio3_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap242x_gpio4_irqs[] = {
+	{ .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
+	&omap2420_l4_wkup__gpio4,
+};
+
+static struct omap_hwmod omap2420_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap242x_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio4_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
 static __initdata struct omap_hwmod *omap2420_hwmods[] = {
 	&omap2420_l3_main_hwmod,
 	&omap2420_l4_core_hwmod,
@@ -569,6 +791,12 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
 	&omap2420_uart3_hwmod,
 	&omap2420_i2c1_hwmod,
 	&omap2420_i2c2_hwmod,
+
+	/* gpio class */
+	&omap2420_gpio1_hwmod,
+	&omap2420_gpio2_hwmod,
+	&omap2420_gpio3_hwmod,
+	&omap2420_gpio4_hwmod,
 	NULL,
 };
 

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -17,7 +17,7 @@
 #include <plat/dma.h>
 #include <plat/serial.h>
 #include <plat/i2c.h>
-#include <plat/omap24xx.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -38,6 +38,11 @@ static struct omap_hwmod omap2430_iva_hwmod;
 static struct omap_hwmod omap2430_l3_main_hwmod;
 static struct omap_hwmod omap2430_l4_core_hwmod;
 static struct omap_hwmod omap2430_wd_timer2_hwmod;
+static struct omap_hwmod omap2430_gpio1_hwmod;
+static struct omap_hwmod omap2430_gpio2_hwmod;
+static struct omap_hwmod omap2430_gpio3_hwmod;
+static struct omap_hwmod omap2430_gpio4_hwmod;
+static struct omap_hwmod omap2430_gpio5_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
@@ -569,6 +574,272 @@ static struct omap_hwmod omap2430_i2c2_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
+	{
+		.pa_start	= 0x4900C000,
+		.pa_end		= 0x4900C1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio1_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio2 */
+static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
+	{
+		.pa_start	= 0x4900E000,
+		.pa_end		= 0x4900E1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio2_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio3 */
+static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
+	{
+		.pa_start	= 0x49010000,
+		.pa_end		= 0x490101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio3_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio4 */
+static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
+	{
+		.pa_start	= 0x49012000,
+		.pa_end		= 0x490121ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio4_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> gpio5 */
+static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
+	{
+		.pa_start	= 0x480B6000,
+		.pa_end		= 0x480B61ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_gpio5_hwmod,
+	.clk		= "gpio5_ick",
+	.addr		= omap2430_gpio5_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio5_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = false,
+};
+
+static struct omap_hwmod_class_sysconfig omap243x_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+static struct omap_hwmod_class omap243x_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap243x_gpio_sysc,
+	.rev = 0,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap243x_gpio1_irqs[] = {
+	{ .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
+	&omap2430_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap2430_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap243x_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio1_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio1_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap243x_gpio2_irqs[] = {
+	{ .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
+	&omap2430_l4_wkup__gpio2,
+};
+
+static struct omap_hwmod omap2430_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap243x_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio2_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio2_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap243x_gpio3_irqs[] = {
+	{ .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
+	&omap2430_l4_wkup__gpio3,
+};
+
+static struct omap_hwmod omap2430_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap243x_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio3_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio3_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap243x_gpio4_irqs[] = {
+	{ .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
+	&omap2430_l4_wkup__gpio4,
+};
+
+static struct omap_hwmod omap2430_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap243x_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio4_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio4_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio5 */
+static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
+	{ .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
+	&omap2430_l4_core__gpio5,
+};
+
+static struct omap_hwmod omap2430_gpio5_hwmod = {
+	.name		= "gpio5",
+	.mpu_irqs	= omap243x_gpio5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio5_irqs),
+	.main_clk	= "gpio5_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 2,
+			.module_bit = OMAP2430_EN_GPIO5_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio5_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
 static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	&omap2430_l3_main_hwmod,
 	&omap2430_l4_core_hwmod,
@@ -581,6 +852,13 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	&omap2430_uart3_hwmod,
 	&omap2430_i2c1_hwmod,
 	&omap2430_i2c2_hwmod,
+
+	/* gpio class */
+	&omap2430_gpio1_hwmod,
+	&omap2430_gpio2_hwmod,
+	&omap2430_gpio3_hwmod,
+	&omap2430_gpio4_hwmod,
+	&omap2430_gpio5_hwmod,
 	NULL,
 };
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -20,7 +20,7 @@
 #include <plat/serial.h>
 #include <plat/l4_3xxx.h>
 #include <plat/i2c.h>
-#include <plat/omap34xx.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -45,6 +45,12 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
 static struct omap_hwmod omap3xxx_i2c1_hwmod;
 static struct omap_hwmod omap3xxx_i2c2_hwmod;
 static struct omap_hwmod omap3xxx_i2c3_hwmod;
+static struct omap_hwmod omap3xxx_gpio1_hwmod;
+static struct omap_hwmod omap3xxx_gpio2_hwmod;
+static struct omap_hwmod omap3xxx_gpio3_hwmod;
+static struct omap_hwmod omap3xxx_gpio4_hwmod;
+static struct omap_hwmod omap3xxx_gpio5_hwmod;
+static struct omap_hwmod omap3xxx_gpio6_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@@ -739,6 +745,351 @@ static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x48310000,
+		.pa_end		= 0x483101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_gpio1_hwmod,
+	.addr		= omap3xxx_gpio1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x49050000,
+		.pa_end		= 0x490501ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio2_hwmod,
+	.addr		= omap3xxx_gpio2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x49052000,
+		.pa_end		= 0x490521ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio3_hwmod,
+	.addr		= omap3xxx_gpio3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
+	{
+		.pa_start	= 0x49054000,
+		.pa_end		= 0x490541ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio4_hwmod,
+	.addr		= omap3xxx_gpio4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
+	{
+		.pa_start	= 0x49056000,
+		.pa_end		= 0x490561ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio5_hwmod,
+	.addr		= omap3xxx_gpio5_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio5_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
+	{
+		.pa_start	= 0x49058000,
+		.pa_end		= 0x490581ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio6_hwmod,
+	.addr		= omap3xxx_gpio6_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio6_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap3xxx_gpio_sysc,
+	.rev = 1,
+};
+
+/* gpio_dev_attr*/
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap3xxx_gpio1_irqs[] = {
+	{ .irq = 29 }, /* INT_34XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
+	&omap3xxx_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap3xxx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap3xxx_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
+	.main_clk	= "gpio1_ick",
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio1_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap3xxx_gpio2_irqs[] = {
+	{ .irq = 30 }, /* INT_34XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
+	&omap3xxx_l4_per__gpio2,
+};
+
+static struct omap_hwmod omap3xxx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap3xxx_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
+	.main_clk	= "gpio2_ick",
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO2_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio2_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap3xxx_gpio3_irqs[] = {
+	{ .irq = 31 }, /* INT_34XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
+	&omap3xxx_l4_per__gpio3,
+};
+
+static struct omap_hwmod omap3xxx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap3xxx_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
+	.main_clk	= "gpio3_ick",
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO3_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio3_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap3xxx_gpio4_irqs[] = {
+	{ .irq = 32 }, /* INT_34XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
+	&omap3xxx_l4_per__gpio4,
+};
+
+static struct omap_hwmod omap3xxx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap3xxx_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
+	.main_clk	= "gpio4_ick",
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO4_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio4_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio5 */
+static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
+	{ .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
+	&omap3xxx_l4_per__gpio5,
+};
+
+static struct omap_hwmod omap3xxx_gpio5_hwmod = {
+	.name		= "gpio5",
+	.mpu_irqs	= omap3xxx_gpio5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
+	.main_clk	= "gpio5_ick",
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO5_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio5_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio6 */
+static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
+	{ .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
+};
+
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio6_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
+	&omap3xxx_l4_per__gpio6,
+};
+
+static struct omap_hwmod omap3xxx_gpio6_hwmod = {
+	.name		= "gpio6",
+	.mpu_irqs	= omap3xxx_gpio6_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
+	.main_clk	= "gpio6_ick",
+	.opt_clks	= gpio6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO6_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio6_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio6_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
@@ -754,6 +1105,14 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_i2c1_hwmod,
 	&omap3xxx_i2c2_hwmod,
 	&omap3xxx_i2c3_hwmod,
+
+	/* gpio class */
+	&omap3xxx_gpio1_hwmod,
+	&omap3xxx_gpio2_hwmod,
+	&omap3xxx_gpio3_hwmod,
+	&omap3xxx_gpio4_hwmod,
+	&omap3xxx_gpio5_hwmod,
+	&omap3xxx_gpio6_hwmod,
 	NULL,
 };
 

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -22,6 +22,7 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/cpu.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -1043,6 +1044,338 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap44xx_gpio_sysc,
+	.rev = 2,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = true,
+};
+
+/* gpio1 */
+static struct omap_hwmod omap44xx_gpio1_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = {
+	{ .irq = 29 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x4a310000,
+		.pa_end		= 0x4a3101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_gpio1_hwmod,
+	.addr		= omap44xx_gpio1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio1_slaves[] = {
+	&omap44xx_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "sys_32k_ck" },
+};
+
+static struct omap_hwmod omap44xx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.mpu_irqs	= omap44xx_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio1_irqs),
+	.main_clk	= "gpio1_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio2 */
+static struct omap_hwmod omap44xx_gpio2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = {
+	{ .irq = 30 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x48055000,
+		.pa_end		= 0x480551ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio2_hwmod,
+	.addr		= omap44xx_gpio2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio2_slaves[] = {
+	&omap44xx_l4_per__gpio2,
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "sys_32k_ck" },
+};
+
+static struct omap_hwmod omap44xx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.mpu_irqs	= omap44xx_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio2_irqs),
+	.main_clk	= "gpio2_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio3 */
+static struct omap_hwmod omap44xx_gpio3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = {
+	{ .irq = 31 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x48057000,
+		.pa_end		= 0x480571ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio3_hwmod,
+	.addr		= omap44xx_gpio3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio3_slaves[] = {
+	&omap44xx_l4_per__gpio3,
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "sys_32k_ck" },
+};
+
+static struct omap_hwmod omap44xx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.mpu_irqs	= omap44xx_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio3_irqs),
+	.main_clk	= "gpio3_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio4 */
+static struct omap_hwmod omap44xx_gpio4_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = {
+	{ .irq = 32 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
+	{
+		.pa_start	= 0x48059000,
+		.pa_end		= 0x480591ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio4_hwmod,
+	.addr		= omap44xx_gpio4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio4 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio4_slaves[] = {
+	&omap44xx_l4_per__gpio4,
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "sys_32k_ck" },
+};
+
+static struct omap_hwmod omap44xx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.mpu_irqs	= omap44xx_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio4_irqs),
+	.main_clk	= "gpio4_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio4_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio5 */
+static struct omap_hwmod omap44xx_gpio5_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = {
+	{ .irq = 33 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
+	{
+		.pa_start	= 0x4805b000,
+		.pa_end		= 0x4805b1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio5_hwmod,
+	.addr		= omap44xx_gpio5_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio5_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio5 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio5_slaves[] = {
+	&omap44xx_l4_per__gpio5,
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "sys_32k_ck" },
+};
+
+static struct omap_hwmod omap44xx_gpio5_hwmod = {
+	.name		= "gpio5",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.mpu_irqs	= omap44xx_gpio5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio5_irqs),
+	.main_clk	= "gpio5_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio5_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio6 */
+static struct omap_hwmod omap44xx_gpio6_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = {
+	{ .irq = 34 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
+	{
+		.pa_start	= 0x4805d000,
+		.pa_end		= 0x4805d1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio6_hwmod,
+	.addr		= omap44xx_gpio6_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio6_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio6 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio6_slaves[] = {
+	&omap44xx_l4_per__gpio6,
+};
+
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+	{ .role = "dbclk", .clk = "sys_32k_ck" },
+};
+
+static struct omap_hwmod omap44xx_gpio6_hwmod = {
+	.name		= "gpio6",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.mpu_irqs	= omap44xx_gpio6_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio6_irqs),
+	.main_clk	= "gpio6_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio6_opt_clks,
+	.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio6_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio6_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	/* dmm class */
 	&omap44xx_dmm_hwmod,
@@ -1066,6 +1399,14 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	/* mpu_bus class */
 	&omap44xx_mpu_private_hwmod,
 
+	/* gpio class */
+	&omap44xx_gpio1_hwmod,
+	&omap44xx_gpio2_hwmod,
+	&omap44xx_gpio3_hwmod,
+	&omap44xx_gpio4_hwmod,
+	&omap44xx_gpio5_hwmod,
+	&omap44xx_gpio6_hwmod,
+
 	/* mpu class */
 	&omap44xx_mpu_hwmod,
 	/* wd_timer class */

arch/arm/plat-omap/gpio.c

@@ -21,6 +21,8 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -32,7 +34,6 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -46,10 +47,6 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		0xfffbe400
-#define OMAP1610_GPIO2_BASE		0xfffbec00
-#define OMAP1610_GPIO3_BASE		0xfffbb400
-#define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -71,12 +68,6 @@
 /*
  * OMAP7XX specific GPIO registers
  */
-#define OMAP7XX_GPIO1_BASE		0xfffbc000
-#define OMAP7XX_GPIO2_BASE		0xfffbc800
-#define OMAP7XX_GPIO3_BASE		0xfffbd000
-#define OMAP7XX_GPIO4_BASE		0xfffbd800
-#define OMAP7XX_GPIO5_BASE		0xfffbe000
-#define OMAP7XX_GPIO6_BASE		0xfffbe800
 #define OMAP7XX_GPIO_DATA_INPUT		0x00
 #define OMAP7XX_GPIO_DATA_OUTPUT	0x04
 #define OMAP7XX_GPIO_DIR_CONTROL	0x08
@@ -84,25 +75,10 @@
 #define OMAP7XX_GPIO_INT_MASK		0x10
 #define OMAP7XX_GPIO_INT_STATUS		0x14
 
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-
 /*
- * omap24xx specific GPIO registers
+ * omap2+ specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		0x48018000
-#define OMAP242X_GPIO2_BASE		0x4801a000
-#define OMAP242X_GPIO3_BASE		0x4801c000
-#define OMAP242X_GPIO4_BASE		0x4801e000
-
-#define OMAP243X_GPIO1_BASE		0x4900C000
-#define OMAP243X_GPIO2_BASE		0x4900E000
-#define OMAP243X_GPIO3_BASE		0x49010000
-#define OMAP243X_GPIO4_BASE		0x49012000
-#define OMAP243X_GPIO5_BASE		0x480B6000
-
 #define OMAP24XX_GPIO_REVISION		0x0000
-#define OMAP24XX_GPIO_SYSCONFIG		0x0010
-#define OMAP24XX_GPIO_SYSSTATUS		0x0014
 #define OMAP24XX_GPIO_IRQSTATUS1	0x0018
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
@@ -126,7 +102,6 @@
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
 #define OMAP4_GPIO_REVISION		0x0000
-#define OMAP4_GPIO_SYSCONFIG		0x0010
 #define OMAP4_GPIO_EOI			0x0020
 #define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
 #define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
@@ -138,7 +113,6 @@
 #define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
 #define OMAP4_GPIO_IRQWAKEN0		0x0044
 #define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_SYSSTATUS		0x0114
 #define OMAP4_GPIO_IRQENABLE1		0x011c
 #define OMAP4_GPIO_WAKE_EN		0x0120
 #define OMAP4_GPIO_IRQSTATUS2		0x0128
@@ -159,26 +133,6 @@
 #define OMAP4_GPIO_SETWKUENA		0x0184
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
-/*
- * omap34xx specific GPIO registers
- */
-
-#define OMAP34XX_GPIO1_BASE		0x48310000
-#define OMAP34XX_GPIO2_BASE		0x49050000
-#define OMAP34XX_GPIO3_BASE		0x49052000
-#define OMAP34XX_GPIO4_BASE		0x49054000
-#define OMAP34XX_GPIO5_BASE		0x49056000
-#define OMAP34XX_GPIO6_BASE		0x49058000
-
-/*
- * OMAP44XX  specific GPIO registers
- */
-#define OMAP44XX_GPIO1_BASE             0x4a310000
-#define OMAP44XX_GPIO2_BASE             0x48055000
-#define OMAP44XX_GPIO3_BASE             0x48057000
-#define OMAP44XX_GPIO4_BASE             0x48059000
-#define OMAP44XX_GPIO5_BASE             0x4805B000
-#define OMAP44XX_GPIO6_BASE             0x4805D000
 
 struct gpio_bank {
 	unsigned long pbase;
@@ -190,14 +144,12 @@ struct gpio_bank {
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
 	u32 saved_datain;
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
-#endif
 	u32 level_mask;
 	u32 toggle_mask;
 	spinlock_t lock;
@@ -205,104 +157,13 @@ struct gpio_bank {
 	struct clk *dbck;
 	u32 mod_usage;
 	u32 dbck_enable_mask;
+	struct device *dev;
+	bool dbck_flag;
+	int stride;
 };
 
-#define METHOD_MPUIO		0
-#define METHOD_GPIO_1510	1
-#define METHOD_GPIO_1610	2
-#define METHOD_GPIO_7XX		3
-#define METHOD_GPIO_24XX	5
-#define METHOD_GPIO_44XX	6
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
-		METHOD_MPUIO },
-	{ OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
-		METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
-		METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
-		METHOD_GPIO_1610 },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
-		METHOD_MPUIO },
-	{ OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_1510 }
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct gpio_bank gpio_bank_7xx[7] = {
-	{ OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
-		METHOD_MPUIO },
-	{ OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160,
-		METHOD_GPIO_7XX },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-
-static struct gpio_bank gpio_bank_242x[4] = {
-	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_24XX },
-};
-
-static struct gpio_bank gpio_bank_243x[5] = {
-	{ OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
-		METHOD_GPIO_24XX },
-};
-
-#endif
-
 #ifdef CONFIG_ARCH_OMAP3
-static struct gpio_bank gpio_bank_34xx[6] = {
-	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
-		METHOD_GPIO_24XX },
-};
-
 struct omap3_gpio_regs {
-	u32 sysconfig;
 	u32 irqenable1;
 	u32 irqenable2;
 	u32 wake_en;
@@ -318,26 +179,16 @@ struct omap3_gpio_regs {
 static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 #endif
 
-#ifdef CONFIG_ARCH_OMAP4
-static struct gpio_bank gpio_bank_44xx[6] = {
-	{ OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160,
-		METHOD_GPIO_44XX },
-};
+/*
+ * TODO: Cleanup gpio_bank usage as it is having information
+ * related to all instances of the device
+ */
+static struct gpio_bank *gpio_bank;
 
-#endif
+static int bank_width;
 
-static struct gpio_bank *gpio_bank;
-static int gpio_bank_count;
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+int gpio_bank_count;
 
 static inline struct gpio_bank *get_gpio_bank(int gpio)
 {
@@ -417,7 +268,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -465,7 +316,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT;
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
 		l = __raw_readl(reg);
 		if (enable)
 			l |= 1 << gpio;
@@ -537,7 +388,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_INPUT_LATCH;
+		reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -583,7 +434,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT;
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -642,6 +493,9 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 	u32			val;
 	u32			l;
 
+	if (!bank->dbck_flag)
+		return;
+
 	if (debounce < 32)
 		debounce = 0x01;
 	else if (debounce > 7936)
@@ -651,7 +505,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 
 	l = 1 << get_gpio_index(gpio);
 
-	if (cpu_is_omap44xx())
+	if (bank->method == METHOD_GPIO_44XX)
 		reg += OMAP4_GPIO_DEBOUNCINGTIME;
 	else
 		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
@@ -659,7 +513,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 	__raw_writel(debounce, reg);
 
 	reg = bank->base;
-	if (cpu_is_omap44xx())
+	if (bank->method == METHOD_GPIO_44XX)
 		reg += OMAP4_GPIO_DEBOUNCENABLE;
 	else
 		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
@@ -668,11 +522,9 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 
 	if (debounce) {
 		val |= l;
-		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		clk_enable(bank->dbck);
 	} else {
 		val &= ~l;
-		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 		clk_disable(bank->dbck);
 	}
 	bank->dbck_enable_mask = val;
@@ -769,7 +621,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE;
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
 		break;
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
@@ -803,7 +655,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE;
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
 		l = __raw_readl(reg);
 		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
@@ -989,7 +841,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT;
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 		mask = 0xffff;
 		inv = 1;
 		break;
@@ -1046,7 +898,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT;
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 		l = __raw_readl(reg);
 		if (enable)
 			l &= ~(gpio_mask);
@@ -1296,7 +1148,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	bank = get_irq_data(irq);
 #ifdef CONFIG_ARCH_OMAP1
 	if (bank->method == METHOD_MPUIO)
-		isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
+		isr_reg = bank->base +
+				OMAP_MPUIO_GPIO_INT / bank->stride;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510)
@@ -1494,7 +1347,8 @@ static int omap_mpuio_suspend_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
-	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -1509,7 +1363,8 @@ static int omap_mpuio_resume_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
-	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -1545,7 +1400,8 @@ static struct platform_device omap_mpuio_device = {
 
 static inline void mpuio_init(void)
 {
-	platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]);
+	struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
+	platform_set_drvdata(&omap_mpuio_device, bank);
 
 	if (platform_driver_register(&omap_mpuio_driver) == 0)
 		(void) platform_device_register(&omap_mpuio_device);
@@ -1588,7 +1444,7 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
 		break;
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_DIR_CONTROL;
@@ -1650,6 +1506,13 @@ static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
 	unsigned long flags;
 
 	bank = container_of(chip, struct gpio_bank, chip);
+
+	if (!bank->dbck) {
+		bank->dbck = clk_get(bank->dev, "dbclk");
+		if (IS_ERR(bank->dbck))
+			dev_err(bank->dev, "Could not get gpio dbck\n");
+	}
+
 	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_debounce(bank, offset, debounce);
 	spin_unlock_irqrestore(&bank->lock, flags);
@@ -1678,34 +1541,16 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 
 /*---------------------------------------------------------------------*/
 
-static int initialized;
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
-static struct clk * gpio_ick;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-static struct clk * gpio_fck;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2430)
-static struct clk * gpio5_ick;
-static struct clk * gpio5_fck;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
-#endif
-
-static void __init omap_gpio_show_rev(void)
+static void __init omap_gpio_show_rev(struct gpio_bank *bank)
 {
 	u32 rev;
 
-	if (cpu_is_omap16xx())
-		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+	if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
+		rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
 	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
 	else if (cpu_is_omap44xx())
-		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+		rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
 	else
 		return;
 
@@ -1718,191 +1563,88 @@ static void __init omap_gpio_show_rev(void)
  */
 static struct lock_class_key gpio_lock_class;
 
-static int __init _omap_gpio_init(void)
+static inline int init_gpio_info(struct platform_device *pdev)
 {
-	int i;
-	int gpio = 0;
-	struct gpio_bank *bank;
-	int bank_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
-	char clk_name[11];
-
-	initialized = 1;
-
-#if defined(CONFIG_ARCH_OMAP1)
-	if (cpu_is_omap15xx()) {
-		gpio_ick = clk_get(NULL, "arm_gpio_ck");
-		if (IS_ERR(gpio_ick))
-			printk("Could not get arm_gpio_ck\n");
-		else
-			clk_enable(gpio_ick);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
-	if (cpu_class_is_omap2()) {
-		gpio_ick = clk_get(NULL, "gpios_ick");
-		if (IS_ERR(gpio_ick))
-			printk("Could not get gpios_ick\n");
-		else
-			clk_enable(gpio_ick);
-		gpio_fck = clk_get(NULL, "gpios_fck");
-		if (IS_ERR(gpio_fck))
-			printk("Could not get gpios_fck\n");
-		else
-			clk_enable(gpio_fck);
-
-		/*
-		 * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK
-		 */
-#if defined(CONFIG_ARCH_OMAP2430)
-		if (cpu_is_omap2430()) {
-			gpio5_ick = clk_get(NULL, "gpio5_ick");
-			if (IS_ERR(gpio5_ick))
-				printk("Could not get gpio5_ick\n");
-			else
-				clk_enable(gpio5_ick);
-			gpio5_fck = clk_get(NULL, "gpio5_fck");
-			if (IS_ERR(gpio5_fck))
-				printk("Could not get gpio5_fck\n");
-			else
-				clk_enable(gpio5_fck);
-		}
-#endif
-	}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
-			sprintf(clk_name, "gpio%d_ick", i + 1);
-			gpio_iclks[i] = clk_get(NULL, clk_name);
-			if (IS_ERR(gpio_iclks[i]))
-				printk(KERN_ERR "Could not get %s\n", clk_name);
-			else
-				clk_enable(gpio_iclks[i]);
-		}
-	}
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		gpio_bank_count = 2;
-		gpio_bank = gpio_bank_1510;
-		bank_size = SZ_2K;
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap16xx()) {
-		gpio_bank_count = 5;
-		gpio_bank = gpio_bank_1610;
-		bank_size = SZ_2K;
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
-		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_7xx;
-		bank_size = SZ_2K;
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-	if (cpu_is_omap242x()) {
-		gpio_bank_count = 4;
-		gpio_bank = gpio_bank_242x;
-	}
-	if (cpu_is_omap243x()) {
-		gpio_bank_count = 5;
-		gpio_bank = gpio_bank_243x;
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-	if (cpu_is_omap34xx()) {
-		gpio_bank_count = OMAP34XX_NR_GPIOS;
-		gpio_bank = gpio_bank_34xx;
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	if (cpu_is_omap44xx()) {
-		gpio_bank_count = OMAP34XX_NR_GPIOS;
-		gpio_bank = gpio_bank_44xx;
-	}
-#endif
-	for (i = 0; i < gpio_bank_count; i++) {
-		int j, gpio_count = 16;
-
-		bank = &gpio_bank[i];
-		spin_lock_init(&bank->lock);
-
-		/* Static mapping, never released */
-		bank->base = ioremap(bank->pbase, bank_size);
-		if (!bank->base) {
-			printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
-			continue;
-		}
-
-		if (bank_is_mpuio(bank))
-			__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
-		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
-			__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
-			__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
-		}
-		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
-			__raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
-			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
-			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
-		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
-			__raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
-
-			gpio_count = 32; /* 7xx has 32-bit GPIOs */
+	/* TODO: Analyze removing gpio_bank_count usage from driver code */
+	gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
+				GFP_KERNEL);
+	if (!gpio_bank) {
+		dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
+		return -ENOMEM;
 	}
+	return 0;
+}
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
-		if ((bank->method == METHOD_GPIO_24XX) ||
-				(bank->method == METHOD_GPIO_44XX)) {
-			static const u32 non_wakeup_gpios[] = {
-				0xe203ffc0, 0x08700040
-			};
-
+/* TODO: Cleanup cpu_is_* checks */
+static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
+{
+	if (cpu_class_is_omap2()) {
 		if (cpu_is_omap44xx()) {
 			__raw_writel(0xffffffff, bank->base +
 					OMAP4_GPIO_IRQSTATUSCLR0);
-				__raw_writew(0x0015, bank->base +
-						OMAP4_GPIO_SYSCONFIG);
 			__raw_writel(0x00000000, bank->base +
 					 OMAP4_GPIO_DEBOUNCENABLE);
-				/*
-				 * Initialize interface clock ungated,
-				 * module enabled
-				 */
+			/* Initialize interface clk ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
-			} else {
+		} else if (cpu_is_omap34xx()) {
 			__raw_writel(0x00000000, bank->base +
 					OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base +
 					OMAP24XX_GPIO_IRQSTATUS1);
-				__raw_writew(0x0015, bank->base +
-						OMAP24XX_GPIO_SYSCONFIG);
 			__raw_writel(0x00000000, bank->base +
 					OMAP24XX_GPIO_DEBOUNCE_EN);
 
+			/* Initialize interface clk ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		} else if (cpu_is_omap24xx()) {
+			static const u32 non_wakeup_gpios[] = {
+				0xe203ffc0, 0x08700040
+			};
+			if (id < ARRAY_SIZE(non_wakeup_gpios))
+				bank->non_wakeup_gpios = non_wakeup_gpios[id];
+		}
+	} else if (cpu_class_is_omap1()) {
+		if (bank_is_mpuio(bank))
+			__raw_writew(0xffff, bank->base +
+				OMAP_MPUIO_GPIO_MASKIT / bank->stride);
+		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
+			__raw_writew(0xffff, bank->base
+						+ OMAP1510_GPIO_INT_MASK);
+			__raw_writew(0x0000, bank->base
+						+ OMAP1510_GPIO_INT_STATUS);
+		}
+		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
+			__raw_writew(0x0000, bank->base
+						+ OMAP1610_GPIO_IRQENABLE1);
+			__raw_writew(0xffff, bank->base
+						+ OMAP1610_GPIO_IRQSTATUS1);
+			__raw_writew(0x0014, bank->base
+						+ OMAP1610_GPIO_SYSCONFIG);
+
 			/*
-				 * Initialize interface clock ungated,
-				 * module enabled
+			 * Enable system clock for GPIO module.
+			 * The CAM_CLK_CTRL *is* really the right place.
 			 */
-				__raw_writel(0, bank->base +
-						OMAP24XX_GPIO_CTRL);
+			omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+						ULPD_CAM_CLK_CTRL);
 		}
-			if (cpu_is_omap24xx() &&
-			    i < ARRAY_SIZE(non_wakeup_gpios))
-				bank->non_wakeup_gpios = non_wakeup_gpios[i];
-			gpio_count = 32;
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base
+						+ OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base
+						+ OMAP7XX_GPIO_INT_STATUS);
 		}
-#endif
+	}
+}
+
+static void __init omap_gpio_chip_init(struct gpio_bank *bank)
+{
+	int j;
+	static int gpio;
 
 	bank->mod_usage = 0;
-		/* REVISIT eventually switch from OMAP-specific gpio structs
+	/*
+	 * REVISIT eventually switch from OMAP-specific gpio structs
 	 * over to the generic ones
 	 */
 	bank->chip.request = omap_gpio_request;
@@ -1922,14 +1664,14 @@ static int __init _omap_gpio_init(void)
 	} else {
 		bank->chip.label = "gpio";
 		bank->chip.base = gpio;
-			gpio += gpio_count;
+		gpio += bank_width;
 	}
-		bank->chip.ngpio = gpio_count;
+	bank->chip.ngpio = bank_width;
 
 	gpiochip_add(&bank->chip);
 
 	for (j = bank->virtual_irq_start;
-		     j < bank->virtual_irq_start + gpio_count; j++) {
+		     j < bank->virtual_irq_start + bank_width; j++) {
 		lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
 		set_irq_chip_data(j, bank);
 		if (bank_is_mpuio(bank))
@@ -1941,27 +1683,70 @@ static int __init _omap_gpio_init(void)
 	}
 	set_irq_chained_handler(bank->irq, gpio_irq_handler);
 	set_irq_data(bank->irq, bank);
+}
 
-		if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-			sprintf(clk_name, "gpio%d_dbck", i + 1);
-			bank->dbck = clk_get(NULL, clk_name);
-			if (IS_ERR(bank->dbck))
-				printk(KERN_ERR "Could not get %s\n", clk_name);
+static int __devinit omap_gpio_probe(struct platform_device *pdev)
+{
+	static int gpio_init_done;
+	struct omap_gpio_platform_data *pdata;
+	struct resource *res;
+	int id;
+	struct gpio_bank *bank;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	pdata = pdev->dev.platform_data;
+
+	if (!gpio_init_done) {
+		int ret;
+
+		ret = init_gpio_info(pdev);
+		if (ret)
+			return ret;
 	}
+
+	id = pdev->id;
+	bank = &gpio_bank[id];
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
+		return -ENODEV;
 	}
 
-	/* Enable system clock for GPIO module.
-	 * The CAM_CLK_CTRL *is* really the right place. */
-	if (cpu_is_omap16xx())
-		omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
+	bank->irq = res->start;
+	bank->virtual_irq_start = pdata->virtual_irq_start;
+	bank->method = pdata->bank_type;
+	bank->dev = &pdev->dev;
+	bank->dbck_flag = pdata->dbck_flag;
+	bank->stride = pdata->bank_stride;
+	bank_width = pdata->bank_width;
 
-	/* Enable autoidle for the OCP interface */
-	if (cpu_is_omap24xx())
-		omap_writel(1 << 0, 0x48019010);
-	if (cpu_is_omap34xx())
-		omap_writel(1 << 0, 0x48306814);
+	spin_lock_init(&bank->lock);
 
-	omap_gpio_show_rev();
+	/* Static mapping, never released */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
+		return -ENODEV;
+	}
+
+	bank->base = ioremap(res->start, resource_size(res));
+	if (!bank->base) {
+		dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
+		return -ENOMEM;
+	}
+
+	pm_runtime_enable(bank->dev);
+	pm_runtime_get_sync(bank->dev);
+
+	omap_gpio_mod_init(bank, id);
+	omap_gpio_chip_init(bank);
+	omap_gpio_show_rev(bank);
+
+	if (!gpio_init_done)
+		gpio_init_done = 1;
 
 	return 0;
 }
@@ -2256,8 +2041,6 @@ void omap_gpio_save_context(void)
 	/* saving banks from 2-6 only since GPIO1 is in WKUP */
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		gpio_context[i].sysconfig =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
 		gpio_context[i].irqenable1 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
 		gpio_context[i].irqenable2 =
@@ -2288,8 +2071,6 @@ void omap_gpio_restore_context(void)
 
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		__raw_writel(gpio_context[i].sysconfig,
-				bank->base + OMAP24XX_GPIO_SYSCONFIG);
 		__raw_writel(gpio_context[i].irqenable1,
 				bank->base + OMAP24XX_GPIO_IRQENABLE1);
 		__raw_writel(gpio_context[i].irqenable2,
@@ -2314,25 +2095,28 @@ void omap_gpio_restore_context(void)
 }
 #endif
 
+static struct platform_driver omap_gpio_driver = {
+	.probe		= omap_gpio_probe,
+	.driver		= {
+		.name	= "omap_gpio",
+	},
+};
+
 /*
- * This may get called early from board specific init
- * for boards that have interrupts routed via FPGA.
+ * gpio driver register needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap_gpio_drv_reg() is a postcore_initcall.
  */
-int __init omap_gpio_init(void)
+static int __init omap_gpio_drv_reg(void)
 {
-	if (!initialized)
-		return _omap_gpio_init();
-	else
-		return 0;
+	return platform_driver_register(&omap_gpio_driver);
 }
+postcore_initcall(omap_gpio_drv_reg);
 
 static int __init omap_gpio_sysinit(void)
 {
 	int ret = 0;
 
-	if (!initialized)
-		ret = _omap_gpio_init();
-
 	mpuio_init();
 
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)

arch/arm/plat-omap/include/plat/gpio.h

@@ -27,26 +27,15 @@
 #define __ASM_ARCH_OMAP_GPIO_H
 
 #include <linux/io.h>
+#include <linux/platform_device.h>
 #include <mach/irqs.h>
 
 #define OMAP1_MPUIO_BASE			0xfffb5000
 
-#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
-
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x02
-#define OMAP_MPUIO_IO_CNTL		0x04
-#define OMAP_MPUIO_KBR_LATCH		0x08
-#define OMAP_MPUIO_KBC			0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
-#define OMAP_MPUIO_KBD_INT		0x10
-#define OMAP_MPUIO_GPIO_INT		0x12
-#define OMAP_MPUIO_KBD_MASKIT		0x14
-#define OMAP_MPUIO_GPIO_MASKIT		0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
-#define OMAP_MPUIO_LATCH		0x1a
-#else
+/*
+ * These are the omap15xx/16xx offsets. The omap7xx offset are
+ * OMAP_MPUIO_ / 2 offsets below.
+ */
 #define OMAP_MPUIO_INPUT_LATCH		0x00
 #define OMAP_MPUIO_OUTPUT		0x04
 #define OMAP_MPUIO_IO_CNTL		0x08
@@ -60,7 +49,6 @@
 #define OMAP_MPUIO_GPIO_MASKIT		0x2c
 #define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
 #define OMAP_MPUIO_LATCH		0x34
-#endif
 
 #define OMAP34XX_NR_GPIOS		6
 
@@ -71,7 +59,29 @@
 				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
 				 IH_GPIO_BASE + (nr))
 
-extern int omap_gpio_init(void);	/* Call from board init only */
+#define METHOD_MPUIO		0
+#define METHOD_GPIO_1510	1
+#define METHOD_GPIO_1610	2
+#define METHOD_GPIO_7XX		3
+#define METHOD_GPIO_24XX	5
+#define METHOD_GPIO_44XX	6
+
+struct omap_gpio_dev_attr {
+	int bank_width;		/* GPIO bank width */
+	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+};
+
+struct omap_gpio_platform_data {
+	u16 virtual_irq_start;
+	int bank_type;
+	int bank_width;		/* GPIO bank width */
+	int bank_stride;	/* Only needed for omap1 MPUIO */
+	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+};
+
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+extern int gpio_bank_count;
+
 extern void omap2_gpio_prepare_for_idle(int power_state);
 extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);