Commit 79d7cd31 authored by Ralf Baechle's avatar Ralf Baechle

MIPS: PNX8550: Move code one directory level up.

It was sharing the nxp directory but no code with pnx833x and will fit
better into the new platform makefile scheme, if moved.  Also after the
pnx833x code has been moved up, the pnx8550 Code was the last users of
the nxp dir.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 86c6d4d0
......@@ -202,19 +202,19 @@ load-$(CONFIG_NXP_STB225) += 0xffffffff80001000
#
# Common NXP PNX8550
#
core-$(CONFIG_SOC_PNX8550) += arch/mips/nxp/pnx8550/common/
core-$(CONFIG_SOC_PNX8550) += arch/mips/pnx8550/common/
cflags-$(CONFIG_SOC_PNX8550) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550
#
# NXP PNX8550 JBS board
#
libs-$(CONFIG_PNX8550_JBS) += arch/mips/nxp/pnx8550/jbs/
libs-$(CONFIG_PNX8550_JBS) += arch/mips/pnx8550/jbs/
#cflags-$(CONFIG_PNX8550_JBS) += -I$(srctree)/arch/mips/include/asm/mach-pnx8550
load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000
# NXP PNX8550 STB810 board
#
libs-$(CONFIG_PNX8550_STB810) += arch/mips/nxp/pnx8550/stb810/
libs-$(CONFIG_PNX8550_STB810) += arch/mips/pnx8550/stb810/
load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
......
/*
*
* BRIEF MODULE DESCRIPTION
*
* Author: source@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <pci.h>
#include <glb.h>
#include <nand.h>
static struct resource pci_io_resource = {
.start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */
.end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
.name = "pci IO space",
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource = {
.start = PNX8550_PCIMEM,
.end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
.name = "pci memory space",
.flags = IORESOURCE_MEM
};
extern struct pci_ops pnx8550_pci_ops;
static struct pci_controller pnx8550_controller = {
.pci_ops = &pnx8550_pci_ops,
.io_map_base = PNX8550_PORT_BASE,
.io_resource = &pci_io_resource,
.mem_resource = &pci_mem_resource,
};
/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
static inline unsigned long get_system_mem_size(void)
{
/* Read IP2031_RANK0_ADDR_LO */
unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
/* Read IP2031_RANK1_ADDR_HI */
unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
return dram_r1_hi - dram_r0_lo + 1;
}
static int __init pnx8550_pci_setup(void)
{
int pci_mem_code;
int mem_size = get_system_mem_size() >> 20;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
1:DACs are powerdown
Bit 0:Enable of PCI inta output
-> 0 = Disable PCI inta output
1 = Enable PCI inta output
*/
PNX8550_GLB2_ENAB_INTA_O = 0;
/* Calc the PCI mem size code */
if (mem_size >= 128)
pci_mem_code = SIZE_128M;
else if (mem_size >= 64)
pci_mem_code = SIZE_64M;
else if (mem_size >= 32)
pci_mem_code = SIZE_32M;
else
pci_mem_code = SIZE_16M;
/* Set PCI_XIO registers */
outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
/* Send memory transaction via PCI_BASE2 */
outl(0x00000001, PCI_BASE | PCI_IO);
/* Unlock the setup register */
outl(0xca, PCI_BASE | PCI_UNLOCKREG);
/*
* BAR0 of PNX8550 (pci base 10) must be zero in order for ide
* to work, and in order for bus_to_baddr to work without any
* hacks.
*/
outl(0x00000000, PCI_BASE | PCI_BASE10);
/*
*These two bars are set by default or the boot code.
* However, it's safer to set them here so we're not boot
* code dependent.
*/
outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */
outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */
outl(PCI_EN_TA |
PCI_EN_PCI2MMI |
PCI_EN_XIO |
PCI_SETUP_BASE18_SIZE(SIZE_32M) |
PCI_SETUP_BASE18_EN |
PCI_SETUP_BASE14_EN |
PCI_SETUP_BASE10_PREF |
PCI_SETUP_BASE10_SIZE(pci_mem_code) |
PCI_SETUP_CFGMANAGE_EN |
PCI_SETUP_PCIARB_EN,
PCI_BASE |
PCI_SETUP); /* PCI_SETUP */
outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */
register_pci_controller(&pnx8550_controller);
return 0;
}
arch_initcall(pnx8550_pci_setup);
/*
*
* 2.6 port, Embedded Alley Solutions, Inc
*
* Based on Per Hallsmark, per.hallsmark@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/serial_pnx8xxx.h>
#include <linux/pm.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/time.h>
#include <glb.h>
#include <int.h>
#include <pci.h>
#include <uart.h>
#include <nand.h>
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
extern void pnx8550_machine_halt(void);
extern void pnx8550_machine_power_off(void);
extern struct resource ioport_resource;
extern struct resource iomem_resource;
extern char *prom_getcmdline(void);
struct resource standard_io_resources[] = {
{
.start = 0x00,
.end = 0x1f,
.name = "dma1",
.flags = IORESOURCE_BUSY
}, {
.start = 0x40,
.end = 0x5f,
.name = "timer",
.flags = IORESOURCE_BUSY
}, {
.start = 0x80,
.end = 0x8f,
.name = "dma page reg",
.flags = IORESOURCE_BUSY
}, {
.start = 0xc0,
.end = 0xdf,
.name = "dma2",
.flags = IORESOURCE_BUSY
},
};
#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
extern struct resource pci_io_resource;
extern struct resource pci_mem_resource;
/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
unsigned long get_system_mem_size(void)
{
/* Read IP2031_RANK0_ADDR_LO */
unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
/* Read IP2031_RANK1_ADDR_HI */
unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
return dram_r1_hi - dram_r0_lo + 1;
}
int pnx8550_console_port = -1;
void __init plat_mem_setup(void)
{
int i;
char* argptr;
board_setup(); /* board specific setup */
_machine_restart = pnx8550_machine_restart;
_machine_halt = pnx8550_machine_halt;
pm_power_off = pnx8550_machine_power_off;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
-> 0:DACs are enabled and are working normally
1:DACs are powerdown
Bit 0:Enable of PCI inta output
-> 0 = Disable PCI inta output
1 = Enable PCI inta output
*/
PNX8550_GLB2_ENAB_INTA_O = 0;
/* IO/MEM resources. */
set_io_port_base(PNX8550_PORT_BASE);
ioport_resource.start = 0;
ioport_resource.end = ~0;
iomem_resource.start = 0;
iomem_resource.end = ~0;
/* Request I/O space for devices on this board */
for (i = 0; i < STANDARD_IO_RESOURCES; i++)
request_resource(&ioport_resource, standard_io_resources + i);
/* Place the Mode Control bit for GPIO pin 16 in primary function */
/* Pin 16 is used by UART1, UA1_TX */
outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
PNX8550_GPIO_MC1);
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
argptr += strlen("console=ttyS");
pnx8550_console_port = *argptr == '0' ? 0 : 1;
/* We must initialize the UART (console) before early printk */
/* Set LCR to 8-bit and BAUD to 38400 (no 5) */
ip3106_lcr(UART_BASE, pnx8550_console_port) =
PNX8XXX_UART_LCR_8BIT;
ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
}
return;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment