s390/qeth: cache link_info for ethtool

Since
commit e6e771b3 ("s390/qeth: detach netdevice while card is offline")
there was a timing window during recovery, that qeth_query_card_info could
be sent to the card, even before it was ready for it, leading to a failing
card recovery. There is evidence that this window was hit, as not all
callers of get_link_ksettings() check for netif_device_present.

Use cached values in qeth_get_link_ksettings(), instead of calling
qeth_query_card_info() and falling back to default values in case it
fails. Link info is already updated when the card goes online, e.g. after
STARTLAN (physical link up). Set the link info to default values, when the
card goes offline or at STOPLAN (physical link down). A follow-on patch
will improve values reported for link down.

Fixes: e6e771b3 ("s390/qeth: detach netdevice while card is offline")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Link: https://lore.kernel.org/r/20220805155714.59609-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/s390/net/qeth_core_main.c

@@ -763,6 +763,49 @@ static void qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, int rc,
 				 ipa_name, com, CARD_DEVID(card));
 }
 
+static void qeth_default_link_info(struct qeth_card *card)
+{
+	struct qeth_link_info *link_info = &card->info.link_info;
+
+	QETH_CARD_TEXT(card, 2, "dftlinfo");
+	link_info->duplex = DUPLEX_FULL;
+
+	if (IS_IQD(card) || IS_VM_NIC(card)) {
+		link_info->speed = SPEED_10000;
+		link_info->port = PORT_FIBRE;
+		link_info->link_mode = QETH_LINK_MODE_FIBRE_SHORT;
+	} else {
+		switch (card->info.link_type) {
+		case QETH_LINK_TYPE_FAST_ETH:
+		case QETH_LINK_TYPE_LANE_ETH100:
+			link_info->speed = SPEED_100;
+			link_info->port = PORT_TP;
+			break;
+		case QETH_LINK_TYPE_GBIT_ETH:
+		case QETH_LINK_TYPE_LANE_ETH1000:
+			link_info->speed = SPEED_1000;
+			link_info->port = PORT_FIBRE;
+			break;
+		case QETH_LINK_TYPE_10GBIT_ETH:
+			link_info->speed = SPEED_10000;
+			link_info->port = PORT_FIBRE;
+			break;
+		case QETH_LINK_TYPE_25GBIT_ETH:
+			link_info->speed = SPEED_25000;
+			link_info->port = PORT_FIBRE;
+			break;
+		default:
+			dev_info(&card->gdev->dev,
+				 "Unknown link type %x\n",
+				 card->info.link_type);
+			link_info->speed = SPEED_UNKNOWN;
+			link_info->port = PORT_OTHER;
+		}
+
+		link_info->link_mode = QETH_LINK_MODE_UNKNOWN;
+	}
+}
+
 static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card,
 						struct qeth_ipa_cmd *cmd)
 {
@@ -790,6 +833,7 @@ static struct qeth_ipa_cmd *qeth_check_ipa_data(struct qeth_card *card,
 				 netdev_name(card->dev), card->info.chpid);
 			qeth_issue_ipa_msg(cmd, cmd->hdr.return_code, card);
 			netif_carrier_off(card->dev);
+			qeth_default_link_info(card);
 		}
 		return NULL;
 	case IPA_CMD_STARTLAN:
@@ -4744,92 +4788,6 @@ static int qeth_query_oat_command(struct qeth_card *card, char __user *udata)
 	return rc;
 }
 
-static int qeth_query_card_info_cb(struct qeth_card *card,
-				   struct qeth_reply *reply, unsigned long data)
-{
-	struct qeth_ipa_cmd *cmd = (struct qeth_ipa_cmd *)data;
-	struct qeth_link_info *link_info = reply->param;
-	struct qeth_query_card_info *card_info;
-
-	QETH_CARD_TEXT(card, 2, "qcrdincb");
-	if (qeth_setadpparms_inspect_rc(cmd))
-		return -EIO;
-
-	card_info = &cmd->data.setadapterparms.data.card_info;
-	netdev_dbg(card->dev,
-		   "card info: card_type=0x%02x, port_mode=0x%04x, port_speed=0x%08x\n",
-		   card_info->card_type, card_info->port_mode,
-		   card_info->port_speed);
-
-	switch (card_info->port_mode) {
-	case CARD_INFO_PORTM_FULLDUPLEX:
-		link_info->duplex = DUPLEX_FULL;
-		break;
-	case CARD_INFO_PORTM_HALFDUPLEX:
-		link_info->duplex = DUPLEX_HALF;
-		break;
-	default:
-		link_info->duplex = DUPLEX_UNKNOWN;
-	}
-
-	switch (card_info->card_type) {
-	case CARD_INFO_TYPE_1G_COPPER_A:
-	case CARD_INFO_TYPE_1G_COPPER_B:
-		link_info->speed = SPEED_1000;
-		link_info->port = PORT_TP;
-		break;
-	case CARD_INFO_TYPE_1G_FIBRE_A:
-	case CARD_INFO_TYPE_1G_FIBRE_B:
-		link_info->speed = SPEED_1000;
-		link_info->port = PORT_FIBRE;
-		break;
-	case CARD_INFO_TYPE_10G_FIBRE_A:
-	case CARD_INFO_TYPE_10G_FIBRE_B:
-		link_info->speed = SPEED_10000;
-		link_info->port = PORT_FIBRE;
-		break;
-	default:
-		switch (card_info->port_speed) {
-		case CARD_INFO_PORTS_10M:
-			link_info->speed = SPEED_10;
-			break;
-		case CARD_INFO_PORTS_100M:
-			link_info->speed = SPEED_100;
-			break;
-		case CARD_INFO_PORTS_1G:
-			link_info->speed = SPEED_1000;
-			break;
-		case CARD_INFO_PORTS_10G:
-			link_info->speed = SPEED_10000;
-			break;
-		case CARD_INFO_PORTS_25G:
-			link_info->speed = SPEED_25000;
-			break;
-		default:
-			link_info->speed = SPEED_UNKNOWN;
-		}
-
-		link_info->port = PORT_OTHER;
-	}
-
-	return 0;
-}
-
-int qeth_query_card_info(struct qeth_card *card,
-			 struct qeth_link_info *link_info)
-{
-	struct qeth_cmd_buffer *iob;
-
-	QETH_CARD_TEXT(card, 2, "qcrdinfo");
-	if (!qeth_adp_supported(card, IPA_SETADP_QUERY_CARD_INFO))
-		return -EOPNOTSUPP;
-	iob = qeth_get_adapter_cmd(card, IPA_SETADP_QUERY_CARD_INFO, 0);
-	if (!iob)
-		return -ENOMEM;
-
-	return qeth_send_ipa_cmd(card, iob, qeth_query_card_info_cb, link_info);
-}
-
 static int qeth_init_link_info_oat_cb(struct qeth_card *card,
 				      struct qeth_reply *reply_priv,
 				      unsigned long data)
@@ -4839,6 +4797,7 @@ static int qeth_init_link_info_oat_cb(struct qeth_card *card,
 	struct qeth_query_oat_physical_if *phys_if;
 	struct qeth_query_oat_reply *reply;
 
+	QETH_CARD_TEXT(card, 2, "qoatincb");
 	if (qeth_setadpparms_inspect_rc(cmd))
 		return -EIO;
 
@@ -4918,41 +4877,7 @@ static int qeth_init_link_info_oat_cb(struct qeth_card *card,
 
 static void qeth_init_link_info(struct qeth_card *card)
 {
-	card->info.link_info.duplex = DUPLEX_FULL;
-
-	if (IS_IQD(card) || IS_VM_NIC(card)) {
-		card->info.link_info.speed = SPEED_10000;
-		card->info.link_info.port = PORT_FIBRE;
-		card->info.link_info.link_mode = QETH_LINK_MODE_FIBRE_SHORT;
-	} else {
-		switch (card->info.link_type) {
-		case QETH_LINK_TYPE_FAST_ETH:
-		case QETH_LINK_TYPE_LANE_ETH100:
-			card->info.link_info.speed = SPEED_100;
-			card->info.link_info.port = PORT_TP;
-			break;
-		case QETH_LINK_TYPE_GBIT_ETH:
-		case QETH_LINK_TYPE_LANE_ETH1000:
-			card->info.link_info.speed = SPEED_1000;
-			card->info.link_info.port = PORT_FIBRE;
-			break;
-		case QETH_LINK_TYPE_10GBIT_ETH:
-			card->info.link_info.speed = SPEED_10000;
-			card->info.link_info.port = PORT_FIBRE;
-			break;
-		case QETH_LINK_TYPE_25GBIT_ETH:
-			card->info.link_info.speed = SPEED_25000;
-			card->info.link_info.port = PORT_FIBRE;
-			break;
-		default:
-			dev_info(&card->gdev->dev, "Unknown link type %x\n",
-				 card->info.link_type);
-			card->info.link_info.speed = SPEED_UNKNOWN;
-			card->info.link_info.port = PORT_OTHER;
-		}
-
-		card->info.link_info.link_mode = QETH_LINK_MODE_UNKNOWN;
-	}
+	qeth_default_link_info(card);
 
 	/* Get more accurate data via QUERY OAT: */
 	if (qeth_adp_supported(card, IPA_SETADP_QUERY_OAT)) {
@@ -5461,6 +5386,7 @@ int qeth_set_offline(struct qeth_card *card, const struct qeth_discipline *disc,
 	qeth_clear_working_pool_list(card);
 	qeth_flush_local_addrs(card);
 	card->info.promisc_mode = 0;
+	qeth_default_link_info(card);
 
 	rc  = qeth_stop_channel(&card->data);
 	rc2 = qeth_stop_channel(&card->write);

drivers/s390/net/qeth_ethtool.c

@@ -428,8 +428,8 @@ static int qeth_get_link_ksettings(struct net_device *netdev,
 				   struct ethtool_link_ksettings *cmd)
 {
 	struct qeth_card *card = netdev->ml_priv;
-	struct qeth_link_info link_info;
 
+	QETH_CARD_TEXT(card, 4, "ethtglks");
 	cmd->base.speed = card->info.link_info.speed;
 	cmd->base.duplex = card->info.link_info.duplex;
 	cmd->base.port = card->info.link_info.port;
@@ -439,16 +439,6 @@ static int qeth_get_link_ksettings(struct net_device *netdev,
 	cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID;
 	cmd->base.eth_tp_mdix_ctrl = ETH_TP_MDI_INVALID;
 
-	/* Check if we can obtain more accurate information.	 */
-	if (!qeth_query_card_info(card, &link_info)) {
-		if (link_info.speed != SPEED_UNKNOWN)
-			cmd->base.speed = link_info.speed;
-		if (link_info.duplex != DUPLEX_UNKNOWN)
-			cmd->base.duplex = link_info.duplex;
-		if (link_info.port != PORT_OTHER)
-			cmd->base.port = link_info.port;
-	}
-
 	qeth_set_ethtool_link_modes(cmd, card->info.link_info.link_mode);
 
 	return 0;