[SCSI] lpfc 8.3.11: Driver management improvements via BSG

- Add BSG support for PCI loopback testing.
- Add BSG support for extended mailbox commands.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/lpfc/lpfc.h

@@ -554,6 +554,7 @@ struct lpfc_hba {
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
+	uint32_t *mbox_ext;
 	uint32_t *inb_ha_copy;
 	uint32_t *inb_counter;
 	uint32_t inb_last_counter;
@@ -622,6 +623,7 @@ struct lpfc_hba {
 	uint32_t cfg_enable_hba_reset;
 	uint32_t cfg_enable_hba_heartbeat;
 	uint32_t cfg_enable_bg;
+	uint32_t cfg_hostmem_hgp;
 	uint32_t cfg_log_verbose;
 	uint32_t cfg_aer_support;
 	uint32_t cfg_suppress_link_up;

drivers/scsi/lpfc/lpfc_bsg.h

@@ -93,9 +93,9 @@ struct get_mgmt_rev_reply {
 
 struct dfc_mbox_req {
 	uint32_t command;
+	uint32_t mbOffset;
 	uint32_t inExtWLen;
-	uint32_t outExtWLen;
-	uint8_t mbOffset;
+	uint32_t outWxtWLen;
 };
 
 /* Used for menlo command or menlo data. The xri is only used for menlo data */

drivers/scsi/lpfc/lpfc_hw.h

@@ -2934,6 +2934,12 @@ typedef struct {
 /* Union of all Mailbox Command types */
 #define MAILBOX_CMD_WSIZE	32
 #define MAILBOX_CMD_SIZE	(MAILBOX_CMD_WSIZE * sizeof(uint32_t))
+/* ext_wsize times 4 bytes should not be greater than max xmit size */
+#define MAILBOX_EXT_WSIZE	512
+#define MAILBOX_EXT_SIZE	(MAILBOX_EXT_WSIZE * sizeof(uint32_t))
+#define MAILBOX_HBA_EXT_OFFSET  0x100
+/* max mbox xmit size is a page size for sysfs IO operations */
+#define MAILBOX_MAX_XMIT_SIZE   PAGE_SIZE
 
 typedef union {
 	uint32_t varWords[MAILBOX_CMD_WSIZE - 1]; /* first word is type/
@@ -3652,7 +3658,8 @@ typedef struct _IOCB {	/* IOCB structure */
 /* Maximum IOCBs that will fit in SLI2 slim */
 #define MAX_SLI2_IOCB    498
 #define MAX_SLIM_IOCB_SIZE (SLI2_SLIM_SIZE - \
-			    (sizeof(MAILBOX_t) + sizeof(PCB_t)))
+			    (sizeof(MAILBOX_t) + sizeof(PCB_t) + \
+			    sizeof(uint32_t) * MAILBOX_EXT_WSIZE))
 
 /* HBQ entries are 4 words each = 4k */
 #define LPFC_TOTAL_HBQ_SIZE (sizeof(struct lpfc_hbq_entry) *  \
@@ -3660,6 +3667,7 @@ typedef struct _IOCB {	/* IOCB structure */
 
 struct lpfc_sli2_slim {
 	MAILBOX_t mbx;
+	uint32_t  mbx_ext_words[MAILBOX_EXT_WSIZE];
 	PCB_t pcb;
 	IOCB_t IOCBs[MAX_SLIM_IOCB_SIZE];
 };

drivers/scsi/lpfc/lpfc_init.c

@@ -5059,6 +5059,8 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
 
 	memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
 	phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
+	phba->mbox_ext = (phba->slim2p.virt +
+		offsetof(struct lpfc_sli2_slim, mbx_ext_words));
 	phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
 	phba->IOCBs = (phba->slim2p.virt +
 		       offsetof(struct lpfc_sli2_slim, IOCBs));

drivers/scsi/lpfc/lpfc_mbox.c

@@ -1216,7 +1216,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	phba->pcb->feature = FEATURE_INITIAL_SLI2;
 
 	/* Setup Mailbox pointers */
-	phba->pcb->mailBoxSize = sizeof(MAILBOX_t);
+	phba->pcb->mailBoxSize = sizeof(MAILBOX_t) + MAILBOX_EXT_SIZE;
 	offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt;
 	pdma_addr = phba->slim2p.phys + offset;
 	phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr);
@@ -1272,6 +1272,18 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	 *
 	 */
 
+	if (phba->cfg_hostmem_hgp && phba->sli_rev != 3) {
+		phba->host_gp = &phba->mbox->us.s2.host[0];
+		phba->hbq_put = NULL;
+		offset = (uint8_t *)&phba->mbox->us.s2.host -
+			(uint8_t *)phba->slim2p.virt;
+		pdma_addr = phba->slim2p.phys + offset;
+		phba->pcb->hgpAddrHigh = putPaddrHigh(pdma_addr);
+		phba->pcb->hgpAddrLow = putPaddrLow(pdma_addr);
+	} else {
+		/* Always Host Group Pointer is in SLIM */
+		mb->un.varCfgPort.hps = 1;
+
 		if (phba->sli_rev == 3) {
 			phba->host_gp = &mb_slim->us.s3.host[0];
 			phba->hbq_put = &mb_slim->us.s3.hbq_put[0];
@@ -1291,10 +1303,11 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		/* write HGP data to SLIM at the required longword offset */
 		memset(&hgp, 0, sizeof(struct lpfc_hgp));
 
-	for (i=0; i < phba->sli.num_rings; i++) {
+		for (i = 0; i < phba->sli.num_rings; i++) {
 			lpfc_memcpy_to_slim(phba->host_gp + i, &hgp,
 				    sizeof(*phba->host_gp));
 		}
+	}
 
 	/* Setup Port Group offset */
 	if (phba->sli_rev == 3)

drivers/scsi/lpfc/lpfc_sli.c

@@ -4891,9 +4891,34 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 	mb->mbxOwner = OWN_CHIP;
 
 	if (psli->sli_flag & LPFC_SLI_ACTIVE) {
-		/* First copy command data to host SLIM area */
+		/* Populate mbox extension offset word. */
+		if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len) {
+			*(((uint32_t *)mb) + pmbox->mbox_offset_word)
+				= (uint8_t *)phba->mbox_ext
+				  - (uint8_t *)phba->mbox;
+		}
+
+		/* Copy the mailbox extension data */
+		if (pmbox->in_ext_byte_len && pmbox->context2) {
+			lpfc_sli_pcimem_bcopy(pmbox->context2,
+				(uint8_t *)phba->mbox_ext,
+				pmbox->in_ext_byte_len);
+		}
+		/* Copy command data to host SLIM area */
 		lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
 	} else {
+		/* Populate mbox extension offset word. */
+		if (pmbox->in_ext_byte_len || pmbox->out_ext_byte_len)
+			*(((uint32_t *)mb) + pmbox->mbox_offset_word)
+				= MAILBOX_HBA_EXT_OFFSET;
+
+		/* Copy the mailbox extension data */
+		if (pmbox->in_ext_byte_len && pmbox->context2) {
+			lpfc_memcpy_to_slim(phba->MBslimaddr +
+				MAILBOX_HBA_EXT_OFFSET,
+				pmbox->context2, pmbox->in_ext_byte_len);
+
+		}
 		if (mb->mbxCommand == MBX_CONFIG_PORT) {
 			/* copy command data into host mbox for cmpl */
 			lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
@@ -5003,15 +5028,22 @@ lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
 		if (psli->sli_flag & LPFC_SLI_ACTIVE) {
 			/* copy results back to user */
 			lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
+			/* Copy the mailbox extension data */
+			if (pmbox->out_ext_byte_len && pmbox->context2) {
+				lpfc_sli_pcimem_bcopy(phba->mbox_ext,
+						      pmbox->context2,
+						      pmbox->out_ext_byte_len);
+			}
 		} else {
 			/* First copy command data */
 			lpfc_memcpy_from_slim(mb, phba->MBslimaddr,
 							MAILBOX_CMD_SIZE);
-			if ((mb->mbxCommand == MBX_DUMP_MEMORY) &&
-				pmbox->context2) {
-				lpfc_memcpy_from_slim((void *)pmbox->context2,
-				      phba->MBslimaddr + DMP_RSP_OFFSET,
-						      mb->un.varDmp.word_cnt);
+			/* Copy the mailbox extension data */
+			if (pmbox->out_ext_byte_len && pmbox->context2) {
+				lpfc_memcpy_from_slim(pmbox->context2,
+					phba->MBslimaddr +
+					MAILBOX_HBA_EXT_OFFSET,
+					pmbox->out_ext_byte_len);
 			}
 		}
 
@@ -8133,6 +8165,12 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 				if (pmb->mbox_cmpl) {
 					lpfc_sli_pcimem_bcopy(mbox, pmbox,
 							MAILBOX_CMD_SIZE);
+					if (pmb->out_ext_byte_len &&
+						pmb->context2)
+						lpfc_sli_pcimem_bcopy(
+						phba->mbox_ext,
+						pmb->context2,
+						pmb->out_ext_byte_len);
 				}
 				if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
 					pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;

drivers/scsi/lpfc/lpfc_sli.h

@@ -110,6 +110,9 @@ typedef struct lpfcMboxq {
 
 	void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
 	uint8_t mbox_flag;
+	uint16_t in_ext_byte_len;
+	uint16_t out_ext_byte_len;
+	uint8_t  mbox_offset_word;
 	struct lpfc_mcqe mcqe;
 	struct lpfc_mbx_nembed_sge_virt *sge_array;
 } LPFC_MBOXQ_t;