Commit 7a7e780c authored by David S. Miller's avatar David S. Miller

Merge branch 'phy-next'

Andrew Lunn says:

====================
PHY Kconfig and Makefile cleanup

The Ethernet PHY directory has slowly been getting more entries.
Split the entries in the Makefile and Kconfig into MDIO bus drivers
and PHYs. Within these two groups, sort them. This should reduce merge
conflicts and aid finding what one searches for.

The Kconfig text contains redundant "Driver for" and "Support for"
which add little value, make the vendor less obvious, and defeat the
shortcut key in the menu. Remove such text.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents d985d151 97c84389
...@@ -15,152 +15,218 @@ if PHYLIB ...@@ -15,152 +15,218 @@ if PHYLIB
config SWPHY config SWPHY
bool bool
comment "MII PHY device drivers" comment "MDIO bus device drivers"
config AQUANTIA_PHY
tristate "Drivers for the Aquantia PHYs"
---help---
Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
config AT803X_PHY config MDIO_BCM_IPROC
tristate "Drivers for Atheros AT803X PHYs" tristate "Broadcom iProc MDIO bus controller"
---help--- depends on ARCH_BCM_IPROC || COMPILE_TEST
Currently supports the AT8030 and AT8035 model depends on HAS_IOMEM && OF_MDIO
help
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
config AMD_PHY config MDIO_BCM_UNIMAC
tristate "Drivers for the AMD PHYs" tristate "Broadcom UniMAC MDIO bus controller"
---help--- depends on HAS_IOMEM
Currently supports the am79c874 help
This module provides a driver for the Broadcom UniMAC MDIO busses.
This hardware can be found in the Broadcom GENET Ethernet MAC
controllers as well as some Broadcom Ethernet switches such as the
Starfighter 2 switches.
config MARVELL_PHY config MDIO_BITBANG
tristate "Drivers for Marvell PHYs" tristate "Bitbanged MDIO buses"
---help--- help
Currently has a driver for the 88E1011S This module implements the MDIO bus protocol in software,
for use by low level drivers that export the ability to
config DAVICOM_PHY drive the relevant pins.
tristate "Drivers for Davicom PHYs"
---help---
Currently supports dm9161e and dm9131
config QSEMI_PHY If in doubt, say N.
tristate "Drivers for Quality Semiconductor PHYs"
---help---
Currently supports the qs6612
config LXT_PHY config MDIO_BUS_MUX
tristate "Drivers for the Intel LXT PHYs" tristate
---help--- depends on OF_MDIO
Currently supports the lxt970, lxt971 help
This module provides a driver framework for MDIO bus
multiplexers which connect one of several child MDIO busses
to a parent bus. Switching between child busses is done by
device specific drivers.
config CICADA_PHY config MDIO_BUS_MUX_BCM_IPROC
tristate "Drivers for the Cicada PHYs" tristate "Broadcom iProc based MDIO bus multiplexers"
---help--- depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
Currently supports the cis8204 select MDIO_BUS_MUX
default ARCH_BCM_IPROC
help
This module provides a driver for MDIO bus multiplexers found in
iProc based Broadcom SoCs. This multiplexer connects one of several
child MDIO bus to a parent bus. Buses could be internal as well as
external and selection logic lies inside the same multiplexer.
config VITESSE_PHY config MDIO_BUS_MUX_GPIO
tristate "Drivers for the Vitesse PHYs" tristate "GPIO controlled MDIO bus multiplexers"
---help--- depends on OF_GPIO && OF_MDIO
Currently supports the vsc8244 select MDIO_BUS_MUX
help
This module provides a driver for MDIO bus multiplexers that
are controlled via GPIO lines. The multiplexer connects one of
several child MDIO busses to a parent bus. Child bus
selection is under the control of GPIO lines.
config TERANETICS_PHY config MDIO_BUS_MUX_MMIOREG
tristate "Drivers for the Teranetics PHYs" tristate "MMIO device-controlled MDIO bus multiplexers"
---help--- depends on OF_MDIO && HAS_IOMEM
Currently supports the Teranetics TN2020 select MDIO_BUS_MUX
help
This module provides a driver for MDIO bus multiplexers that
are controlled via a simple memory-mapped device, like an FPGA.
The multiplexer connects one of several child MDIO busses to a
parent bus. Child bus selection is under the control of one of
the FPGA's registers.
config SMSC_PHY Currently, only 8-bit registers are supported.
tristate "Drivers for SMSC PHYs"
---help---
Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
config BCM_NET_PHYLIB config MDIO_CAVIUM
tristate tristate
config BROADCOM_PHY config MDIO_GPIO
tristate "Drivers for Broadcom PHYs" tristate "GPIO lib-based bitbanged MDIO buses"
select BCM_NET_PHYLIB depends on MDIO_BITBANG && GPIOLIB
---help--- ---help---
Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, Supports GPIO lib-based MDIO busses.
BCM5481 and BCM5482 PHYs.
config BCM_CYGNUS_PHY To compile this driver as a module, choose M here: the module
tristate "Drivers for Broadcom Cygnus SoC internal PHY" will be called mdio-gpio.
depends on ARCH_BCM_CYGNUS || COMPILE_TEST
depends on MDIO_BCM_IPROC config MDIO_HISI_FEMAC
select BCM_NET_PHYLIB tristate "Hisilicon FEMAC MDIO bus controller"
depends on HAS_IOMEM && OF_MDIO
help
This module provides a driver for the MDIO busses found in the
Hisilicon SoC that have an Fast Ethernet MAC.
config MDIO_MOXART
tristate "MOXA ART MDIO interface support"
depends on ARCH_MOXART
help
This driver supports the MDIO interface found in the network
interface units of the MOXA ART SoC
config MDIO_OCTEON
tristate "Octeon and some ThunderX SOCs MDIO buses"
depends on 64BIT
depends on HAS_IOMEM
select MDIO_CAVIUM
help
This module provides a driver for the Octeon and ThunderX MDIO
buses. It is required by the Octeon and ThunderX ethernet device
drivers on some systems.
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI
help
This driver supports the MDIO interface found in the network
interface units of the Allwinner SoC that have an EMAC (A10,
A12, A10s, etc.)
config MDIO_THUNDER
tristate "ThunderX SOCs MDIO buses"
depends on 64BIT
depends on PCI
select MDIO_CAVIUM
help
This driver supports the MDIO interfaces found on Cavium
ThunderX SoCs when the MDIO bus device appears as a PCI
device.
config MDIO_XGENE
tristate "APM X-Gene SoC MDIO bus controller"
help
This module provides a driver for the MDIO busses found in the
APM X-Gene SoC's.
comment "MII PHY device drivers"
config AMD_PHY
tristate "AMD PHYs"
---help--- ---help---
This PHY driver is for the 1G internal PHYs of the Broadcom Currently supports the am79c874
Cygnus Family SoC.
Currently supports internal PHY's used in the BCM11300, config AQUANTIA_PHY
BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, tristate "Aquantia PHYs"
BCM58303 & BCM58305 Broadcom Cygnus SoCs. ---help---
Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
config AT803X_PHY
tristate "AT803X PHYs"
---help---
Currently supports the AT8030 and AT8035 model
config BCM63XX_PHY config BCM63XX_PHY
tristate "Drivers for Broadcom 63xx SOCs internal PHY" tristate "Broadcom 63xx SOCs internal PHY"
depends on BCM63XX depends on BCM63XX
select BCM_NET_PHYLIB select BCM_NET_PHYLIB
---help--- ---help---
Currently supports the 6348 and 6358 PHYs. Currently supports the 6348 and 6358 PHYs.
config BCM7XXX_PHY config BCM7XXX_PHY
tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" tristate "Broadcom 7xxx SOCs internal PHYs"
select BCM_NET_PHYLIB select BCM_NET_PHYLIB
---help--- ---help---
Currently supports the BCM7366, BCM7439, BCM7445, and Currently supports the BCM7366, BCM7439, BCM7445, and
40nm and 65nm generation of BCM7xxx Set Top Box SoCs. 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
config BCM87XX_PHY config BCM87XX_PHY
tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" tristate "Broadcom BCM8706 and BCM8727 PHYs"
help help
Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
config ICPLUS_PHY config BCM_CYGNUS_PHY
tristate "Drivers for ICPlus PHYs" tristate "Broadcom Cygnus SoC internal PHY"
depends on ARCH_BCM_CYGNUS || COMPILE_TEST
depends on MDIO_BCM_IPROC
select BCM_NET_PHYLIB
---help--- ---help---
Currently supports the IP175C and IP1001 PHYs. This PHY driver is for the 1G internal PHYs of the Broadcom
Cygnus Family SoC.
config REALTEK_PHY Currently supports internal PHY's used in the BCM11300,
tristate "Drivers for Realtek PHYs" BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
---help--- BCM58303 & BCM58305 Broadcom Cygnus SoCs.
Supports the Realtek 821x PHY.
config NATIONAL_PHY config BCM_NET_PHYLIB
tristate "Drivers for National Semiconductor PHYs" tristate
---help---
Currently supports the DP83865 PHY.
config STE10XP config BROADCOM_PHY
tristate "Driver for STMicroelectronics STe10Xp PHYs" tristate "Broadcom PHYs"
select BCM_NET_PHYLIB
---help--- ---help---
This is the driver for the STe100p and STe101p PHYs. Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
BCM5481 and BCM5482 PHYs.
config LSI_ET1011C_PHY config CICADA_PHY
tristate "Driver for LSI ET1011C PHY" tristate "Cicada PHYs"
---help--- ---help---
Supports the LSI ET1011C PHY. Currently supports the cis8204
config MICREL_PHY config DAVICOM_PHY
tristate "Driver for Micrel PHYs" tristate "Davicom PHYs"
---help--- ---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs. Currently supports dm9161e and dm9131
config DP83848_PHY config DP83848_PHY
tristate "Driver for Texas Instruments DP83848 PHY" tristate "Texas Instruments DP83848 PHY"
---help--- ---help---
Supports the DP83848 PHY. Supports the DP83848 PHY.
config DP83867_PHY config DP83867_PHY
tristate "Drivers for Texas Instruments DP83867 Gigabit PHY" tristate "Texas Instruments DP83867 Gigabit PHY"
---help--- ---help---
Currently supports the DP83867 PHY. Currently supports the DP83867 PHY.
config MICROCHIP_PHY
tristate "Drivers for Microchip PHYs"
help
Supports the LAN88XX PHYs.
config FIXED_PHY config FIXED_PHY
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB depends on PHYLIB
select SWPHY select SWPHY
---help--- ---help---
...@@ -169,148 +235,83 @@ config FIXED_PHY ...@@ -169,148 +235,83 @@ config FIXED_PHY
Currently tested with mpc866ads and mpc8349e-mitx. Currently tested with mpc866ads and mpc8349e-mitx.
config MDIO_BITBANG config ICPLUS_PHY
tristate "Support for bitbanged MDIO buses" tristate "ICPlus PHYs"
help
This module implements the MDIO bus protocol in software,
for use by low level drivers that export the ability to
drive the relevant pins.
If in doubt, say N.
config MDIO_GPIO
tristate "Support for GPIO lib-based bitbanged MDIO buses"
depends on MDIO_BITBANG && GPIOLIB
---help--- ---help---
Supports GPIO lib-based MDIO busses. Currently supports the IP175C and IP1001 PHYs.
To compile this driver as a module, choose M here: the module
will be called mdio-gpio.
config MDIO_CAVIUM
tristate
config MDIO_OCTEON
tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
depends on 64BIT
depends on HAS_IOMEM
select MDIO_CAVIUM
help
This module provides a driver for the Octeon and ThunderX MDIO
buses. It is required by the Octeon and ThunderX ethernet device
drivers on some systems.
config MDIO_THUNDER
tristate "Support for MDIO buses on ThunderX SOCs"
depends on 64BIT
depends on PCI
select MDIO_CAVIUM
help
This driver supports the MDIO interfaces found on Cavium
ThunderX SoCs when the MDIO bus device appears as a PCI
device.
config INTEL_XWAY_PHY
tristate "Intel XWAY PHYs"
---help---
Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
These PHYs are marked as standalone chips under the names
PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
config MDIO_SUN4I config LSI_ET1011C_PHY
tristate "Allwinner sun4i MDIO interface support" tristate "LSI ET1011C PHY"
depends on ARCH_SUNXI ---help---
help Supports the LSI ET1011C PHY.
This driver supports the MDIO interface found in the network
interface units of the Allwinner SoC that have an EMAC (A10,
A12, A10s, etc.)
config MDIO_MOXART config LXT_PHY
tristate "MOXA ART MDIO interface support" tristate "Intel LXT PHYs"
depends on ARCH_MOXART ---help---
help Currently supports the lxt970, lxt971
This driver supports the MDIO interface found in the network
interface units of the MOXA ART SoC
config MDIO_BUS_MUX config MARVELL_PHY
tristate tristate "Marvell PHYs"
depends on OF_MDIO ---help---
help Currently has a driver for the 88E1011S
This module provides a driver framework for MDIO bus
multiplexers which connect one of several child MDIO busses
to a parent bus. Switching between child busses is done by
device specific drivers.
config MDIO_BUS_MUX_GPIO config MICREL_PHY
tristate "Support for GPIO controlled MDIO bus multiplexers" tristate "Micrel PHYs"
depends on OF_GPIO && OF_MDIO ---help---
select MDIO_BUS_MUX Supports the KSZ9021, VSC8201, KS8001 PHYs.
help
This module provides a driver for MDIO bus multiplexers that
are controlled via GPIO lines. The multiplexer connects one of
several child MDIO busses to a parent bus. Child bus
selection is under the control of GPIO lines.
config MDIO_BUS_MUX_MMIOREG config MICROCHIP_PHY
tristate "Support for MMIO device-controlled MDIO bus multiplexers" tristate "Microchip PHYs"
depends on OF_MDIO && HAS_IOMEM
select MDIO_BUS_MUX
help help
This module provides a driver for MDIO bus multiplexers that Supports the LAN88XX PHYs.
are controlled via a simple memory-mapped device, like an FPGA.
The multiplexer connects one of several child MDIO busses to a
parent bus. Child bus selection is under the control of one of
the FPGA's registers.
Currently, only 8-bit registers are supported. config MICROSEMI_PHY
tristate "Microsemi PHYs"
---help---
Currently supports the VSC8531 and VSC8541 PHYs
config MDIO_BUS_MUX_BCM_IPROC config NATIONAL_PHY
tristate "Support for iProc based MDIO bus multiplexers" tristate "National Semiconductor PHYs"
depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST) ---help---
select MDIO_BUS_MUX Currently supports the DP83865 PHY.
default ARCH_BCM_IPROC
help
This module provides a driver for MDIO bus multiplexers found in
iProc based Broadcom SoCs. This multiplexer connects one of several
child MDIO bus to a parent bus. Buses could be internal as well as
external and selection logic lies inside the same multiplexer.
config MDIO_BCM_UNIMAC config QSEMI_PHY
tristate "Broadcom UniMAC MDIO bus controller" tristate "Quality Semiconductor PHYs"
depends on HAS_IOMEM ---help---
help Currently supports the qs6612
This module provides a driver for the Broadcom UniMAC MDIO busses.
This hardware can be found in the Broadcom GENET Ethernet MAC
controllers as well as some Broadcom Ethernet switches such as the
Starfighter 2 switches.
config MDIO_BCM_IPROC config REALTEK_PHY
tristate "Broadcom iProc MDIO bus controller" tristate "Realtek PHYs"
depends on ARCH_BCM_IPROC || COMPILE_TEST ---help---
depends on HAS_IOMEM && OF_MDIO Supports the Realtek 821x PHY.
help
This module provides a driver for the MDIO busses found in the
Broadcom iProc SoC's.
config INTEL_XWAY_PHY config SMSC_PHY
tristate "Driver for Intel XWAY PHYs" tristate "SMSC PHYs"
---help--- ---help---
Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs. Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
These PHYs are marked as standalone chips under the names
PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
config MDIO_HISI_FEMAC config STE10XP
tristate "Hisilicon FEMAC MDIO bus controller" tristate "STMicroelectronics STe10Xp PHYs"
depends on HAS_IOMEM && OF_MDIO ---help---
help This is the driver for the STe100p and STe101p PHYs.
This module provides a driver for the MDIO busses found in the
Hisilicon SoC that have an Fast Ethernet MAC.
config MDIO_XGENE config TERANETICS_PHY
tristate "APM X-Gene SoC MDIO bus controller" tristate "Teranetics PHYs"
help ---help---
This module provides a driver for the MDIO busses found in the Currently supports the Teranetics TN2020
APM X-Gene SoC's.
config MICROSEMI_PHY config VITESSE_PHY
tristate "Drivers for the Microsemi PHYs" tristate "Vitesse PHYs"
---help--- ---help---
Currently supports the VSC8531 and VSC8541 PHYs Currently supports the vsc8244
config XILINX_GMII2RGMII config XILINX_GMII2RGMII
tristate "Xilinx GMII2RGMII converter driver" tristate "Xilinx GMII2RGMII converter driver"
......
# Makefile for Linux PHY drivers # Makefile for Linux PHY drivers and MDIO bus drivers
libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
libphy-$(CONFIG_SWPHY) += swphy.o libphy-$(CONFIG_SWPHY) += swphy.o
obj-$(CONFIG_PHYLIB) += libphy.o obj-$(CONFIG_PHYLIB) += libphy.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
obj-$(CONFIG_MARVELL_PHY) += marvell.o obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_CICADA_PHY) += cicada.o
obj-$(CONFIG_LXT_PHY) += lxt.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o obj-$(CONFIG_CICADA_PHY) += cicada.o
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_DP83640_PHY) += dp83640.o obj-$(CONFIG_DP83640_PHY) += dp83640.o
obj-$(CONFIG_DP83848_PHY) += dp83848.o obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o obj-$(CONFIG_DP83867_PHY) += dp83867.o
obj-$(CONFIG_STE10XP) += ste10Xp.o obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
obj-$(CONFIG_MICREL_PHY) += micrel.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o obj-$(CONFIG_LXT_PHY) += lxt.o
obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_AT803X_PHY) += at803x.o obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment