Commit 7b6b8347 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[BNX2]: Add ethtool support for remote PHY.

Modify the driver's ethtool_ops->get_settings and set_settings
functions to support remote PHY.  Users control the remote copper
PHY settings by specifying link settings for the tp (twisted pair)
port.

The nway_reset function is also modified to support remote PHY.
mii-tool operations are not supported on remote PHY and we will
return -EOPNOTSUPP.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0d8a6571
......@@ -5363,17 +5363,25 @@ static int
bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bnx2 *bp = netdev_priv(dev);
int support_serdes = 0, support_copper = 0;
cmd->supported = SUPPORTED_Autoneg;
if (bp->phy_flags & PHY_SERDES_FLAG) {
if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
support_serdes = 1;
support_copper = 1;
} else if (bp->phy_port == PORT_FIBRE)
support_serdes = 1;
else
support_copper = 1;
if (support_serdes) {
cmd->supported |= SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE;
if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG)
cmd->supported |= SUPPORTED_2500baseX_Full;
cmd->port = PORT_FIBRE;
}
else {
if (support_copper) {
cmd->supported |= SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
......@@ -5381,9 +5389,10 @@ bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
SUPPORTED_1000baseT_Full |
SUPPORTED_TP;
cmd->port = PORT_TP;
}
spin_lock_bh(&bp->phy_lock);
cmd->port = bp->phy_port;
cmd->advertising = bp->advertising;
if (bp->autoneg & AUTONEG_SPEED) {
......@@ -5401,6 +5410,7 @@ bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->speed = -1;
cmd->duplex = -1;
}
spin_unlock_bh(&bp->phy_lock);
cmd->transceiver = XCVR_INTERNAL;
cmd->phy_address = bp->phy_addr;
......@@ -5416,6 +5426,15 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
u8 req_duplex = bp->req_duplex;
u16 req_line_speed = bp->req_line_speed;
u32 advertising = bp->advertising;
int err = -EINVAL;
spin_lock_bh(&bp->phy_lock);
if (cmd->port != PORT_TP && cmd->port != PORT_FIBRE)
goto err_out_unlock;
if (cmd->port != bp->phy_port && !(bp->phy_flags & REMOTE_PHY_CAP_FLAG))
goto err_out_unlock;
if (cmd->autoneg == AUTONEG_ENABLE) {
autoneg |= AUTONEG_SPEED;
......@@ -5428,44 +5447,41 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
(cmd->advertising == ADVERTISED_100baseT_Half) ||
(cmd->advertising == ADVERTISED_100baseT_Full)) {
if (bp->phy_flags & PHY_SERDES_FLAG)
return -EINVAL;
if (cmd->port == PORT_FIBRE)
goto err_out_unlock;
advertising = cmd->advertising;
} else if (cmd->advertising == ADVERTISED_2500baseX_Full) {
if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
return -EINVAL;
} else if (cmd->advertising == ADVERTISED_1000baseT_Full) {
if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ||
(cmd->port == PORT_TP))
goto err_out_unlock;
} else if (cmd->advertising == ADVERTISED_1000baseT_Full)
advertising = cmd->advertising;
}
else if (cmd->advertising == ADVERTISED_1000baseT_Half) {
return -EINVAL;
}
else if (cmd->advertising == ADVERTISED_1000baseT_Half)
goto err_out_unlock;
else {
if (bp->phy_flags & PHY_SERDES_FLAG) {
if (cmd->port == PORT_FIBRE)
advertising = ETHTOOL_ALL_FIBRE_SPEED;
}
else {
else
advertising = ETHTOOL_ALL_COPPER_SPEED;
}
}
advertising |= ADVERTISED_Autoneg;
}
else {
if (bp->phy_flags & PHY_SERDES_FLAG) {
if (cmd->port == PORT_FIBRE) {
if ((cmd->speed != SPEED_1000 &&
cmd->speed != SPEED_2500) ||
(cmd->duplex != DUPLEX_FULL))
return -EINVAL;
goto err_out_unlock;
if (cmd->speed == SPEED_2500 &&
!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
return -EINVAL;
}
else if (cmd->speed == SPEED_1000) {
return -EINVAL;
goto err_out_unlock;
}
else if (cmd->speed == SPEED_1000 || cmd->speed == SPEED_2500)
goto err_out_unlock;
autoneg &= ~AUTONEG_SPEED;
req_line_speed = cmd->speed;
req_duplex = cmd->duplex;
......@@ -5477,13 +5493,12 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
bp->req_line_speed = req_line_speed;
bp->req_duplex = req_duplex;
spin_lock_bh(&bp->phy_lock);
bnx2_setup_phy(bp, bp->phy_port);
err = bnx2_setup_phy(bp, cmd->port);
err_out_unlock:
spin_unlock_bh(&bp->phy_lock);
return 0;
return err;
}
static void
......@@ -5610,6 +5625,14 @@ bnx2_nway_reset(struct net_device *dev)
spin_lock_bh(&bp->phy_lock);
if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
int rc;
rc = bnx2_setup_remote_phy(bp, bp->phy_port);
spin_unlock_bh(&bp->phy_lock);
return rc;
}
/* Force a link down visible on the other side */
if (bp->phy_flags & PHY_SERDES_FLAG) {
bnx2_write_phy(bp, bp->mii_bmcr, BMCR_LOOPBACK);
......@@ -6219,6 +6242,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
case SIOCGMIIREG: {
u32 mii_regval;
if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
return -EOPNOTSUPP;
if (!netif_running(dev))
return -EAGAIN;
......@@ -6235,6 +6261,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
return -EOPNOTSUPP;
if (!netif_running(dev))
return -EAGAIN;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment