Skip to content

L
linux
Commit 7b753f31 authored by Jun Nie's avatar Jun Nie Committed by Greg Kroah-Hartman
Browse files
Options

uart: pl011: Introduce register accessor 

Introduce register accessor to ease loop up table access
in later patch.
Signed-off-by: default avatarJun Nie <jun.nie@linaro.org>
Reviewed-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 534e14e2
Show whitespace changes
Inline Side-by-side
Showing with 141 additions and 122 deletions
drivers/tty/serial/amba-pl011.c
View file @ 7b753f31
......@@ -85,23 +85,26 @@ struct vendor_data {
unsigned int (*get_fifosize)(struct amba_device *dev);
};
/* Max address offset of register in use is 0x48 */
#define REG_NR (0x48 >> 2)
#define IDX(x) (x >> 2)
enum reg_idx {
REG_DR = UART01x_DR,
REG_RSR = UART01x_RSR,
REG_ST_DMAWM = ST_UART011_DMAWM,
REG_FR = UART01x_FR,
REG_ST_LCRH_RX = ST_UART011_LCRH_RX,
REG_ILPR = UART01x_ILPR,
REG_IBRD = UART011_IBRD,
REG_FBRD = UART011_FBRD,
REG_LCRH = UART011_LCRH,
REG_CR = UART011_CR,
REG_IFLS = UART011_IFLS,
REG_IMSC = UART011_IMSC,
REG_RIS = UART011_RIS,
REG_MIS = UART011_MIS,
REG_ICR = UART011_ICR,
REG_DMACR = UART011_DMACR,
REG_DR = IDX(UART01x_DR),
REG_RSR = IDX(UART01x_RSR),
REG_ST_DMAWM = IDX(ST_UART011_DMAWM),
REG_FR = IDX(UART01x_FR),
REG_ST_LCRH_RX = IDX(ST_UART011_LCRH_RX),
REG_ILPR = IDX(UART01x_ILPR),
REG_IBRD = IDX(UART011_IBRD),
REG_FBRD = IDX(UART011_FBRD),
REG_LCRH = IDX(UART011_LCRH),
REG_CR = IDX(UART011_CR),
REG_IFLS = IDX(UART011_IFLS),
REG_IMSC = IDX(UART011_IMSC),
REG_RIS = IDX(UART011_RIS),
REG_MIS = IDX(UART011_MIS),
REG_ICR = IDX(UART011_ICR),
REG_DMACR = IDX(UART011_DMACR),
};
static unsigned int get_fifosize_arm(struct amba_device *dev)
......@@ -203,6 +206,24 @@ struct uart_amba_port {
#endif
};
static unsigned int pl011_readw(struct uart_amba_port *uap, int index)
{
WARN_ON(index > REG_NR);
return readw_relaxed(uap->port.membase + (index << 2));
}
static void pl011_writew(struct uart_amba_port *uap, int val, int index)
{
WARN_ON(index > REG_NR);
writew_relaxed(val, uap->port.membase + (index << 2));
}
static void pl011_writeb(struct uart_amba_port *uap, u8 val, int index)
{
WARN_ON(index > REG_NR);
writeb_relaxed(val, uap->port.membase + (index << 2));
}
/*
* Reads up to 256 characters from the FIFO or until it's empty and
* inserts them into the TTY layer. Returns the number of characters
......@@ -215,12 +236,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
int fifotaken = 0;
while (max_count--) {
status = readw(uap->port.membase + REG_FR);
status = pl011_readw(uap, REG_FR);
if (status & UART01x_FR_RXFE)
break;
/* Take chars from the FIFO and update status */
ch = readw(uap->port.membase + REG_DR) |
ch = pl011_readw(uap, REG_DR) |
UART_DUMMY_DR_RX;
flag = TTY_NORMAL;
uap->port.icount.rx++;
......@@ -457,7 +478,7 @@ static void pl011_dma_tx_callback(void *data)
dmacr = uap->dmacr;
uap->dmacr = dmacr & ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
/*
* If TX DMA was disabled, it means that we've stopped the DMA for
......@@ -571,7 +592,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
dma_dev->device_issue_pending(chan);
uap->dmacr |= UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
uap->dmatx.queued = true;
/*
......@@ -607,9 +628,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/
if (uap->dmatx.queued) {
uap->dmacr |= UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
return true;
}
......@@ -619,7 +640,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
*/
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
return true;
}
return false;
......@@ -633,7 +654,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
{
if (uap->dmatx.queued) {
uap->dmacr &= ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
}
}
......@@ -659,14 +680,12 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
if (!uap->dmatx.queued) {
if (pl011_dma_tx_refill(uap) > 0) {
uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase +
REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
} else
ret = false;
} else if (!(uap->dmacr & UART011_TXDMAE)) {
uap->dmacr |= UART011_TXDMAE;
writew(uap->dmacr,
uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
}
return ret;
}
......@@ -677,9 +696,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
*/
dmacr = uap->dmacr;
uap->dmacr &= ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
if (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF) {
if (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF) {
/*
* No space in the FIFO, so enable the transmit interrupt
* so we know when there is space. Note that once we've
......@@ -688,13 +707,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
return false;
}
writew(uap->port.x_char, uap->port.membase + REG_DR);
pl011_writew(uap, uap->port.x_char, REG_DR);
uap->port.icount.tx++;
uap->port.x_char = 0;
/* Success - restore the DMA state */
uap->dmacr = dmacr;
writew(dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, dmacr, REG_DMACR);
return true;
}
......@@ -722,7 +741,7 @@ __acquires(&uap->port.lock)
DMA_TO_DEVICE);
uap->dmatx.queued = false;
uap->dmacr &= ~UART011_TXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
}
}
......@@ -762,11 +781,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
dma_async_issue_pending(rxchan);
uap->dmacr |= UART011_RXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
uap->dmarx.running = true;
uap->im &= ~UART011_RXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
return 0;
}
......@@ -824,8 +843,9 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap,
*/
if (dma_count == pending && readfifo) {
/* Clear any error flags */
writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
uap->port.membase + REG_ICR);
pl011_writew(uap,
UART011_OEIS | UART011_BEIS | UART011_PEIS
| UART011_FEIS, REG_ICR);
/*
* If we read all the DMA'd characters, and we had an
......@@ -873,7 +893,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
/* Disable RX DMA - incoming data will wait in the FIFO */
uap->dmacr &= ~UART011_RXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
uap->dmarx.running = false;
pending = sgbuf->sg.length - state.residue;
......@@ -893,7 +913,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n");
uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
}
}
......@@ -941,7 +961,7 @@ static void pl011_dma_rx_callback(void *data)
dev_dbg(uap->port.dev, "could not retrigger RX DMA job "
"fall back to interrupt mode\n");
uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
}
}
......@@ -954,7 +974,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap)
{
/* FIXME. Just disable the DMA enable */
uap->dmacr &= ~UART011_RXDMAE;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
}
/*
......@@ -998,7 +1018,7 @@ static void pl011_dma_rx_poll(unsigned long args)
spin_lock_irqsave(&uap->port.lock, flags);
pl011_dma_rx_stop(uap);
uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
spin_unlock_irqrestore(&uap->port.lock, flags);
uap->dmarx.running = false;
......@@ -1060,7 +1080,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
skip_rx:
/* Turn on DMA error (RX/TX will be enabled on demand) */
uap->dmacr |= UART011_DMAONERR;
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
/*
* ST Micro variants has some specific dma burst threshold
......@@ -1068,9 +1088,9 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
* be issued above/below 16 bytes.
*/
if (uap->vendor->dma_threshold)
writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
uap->port.membase + REG_ST_DMAWM);
pl011_writew(uap,
ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
REG_ST_DMAWM);
if (uap->using_rx_dma) {
if (pl011_dma_rx_trigger_dma(uap))
......@@ -1095,12 +1115,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
return;
/* Disable RX and TX DMA */
while (readw(uap->port.membase + REG_FR) & UART01x_FR_BUSY)
while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
barrier();
spin_lock_irq(&uap->port.lock);
uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
writew(uap->dmacr, uap->port.membase + REG_DMACR);
pl011_writew(uap, uap->dmacr, REG_DMACR);
spin_unlock_irq(&uap->port.lock);
if (uap->using_tx_dma) {
......@@ -1201,7 +1221,7 @@ static void pl011_stop_tx(struct uart_port *port)
container_of(port, struct uart_amba_port, port);
uap->im &= ~UART011_TXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
pl011_dma_tx_stop(uap);
}
......@@ -1211,7 +1231,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
static void pl011_start_tx_pio(struct uart_amba_port *uap)
{
uap->im |= UART011_TXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
pl011_tx_chars(uap, false);
}
......@@ -1231,7 +1251,7 @@ static void pl011_stop_rx(struct uart_port *port)
uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
UART011_PEIM|UART011_BEIM|UART011_OEIM);
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
pl011_dma_rx_stop(uap);
}
......@@ -1242,7 +1262,7 @@ static void pl011_enable_ms(struct uart_port *port)
container_of(port, struct uart_amba_port, port);
uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
}
static void pl011_rx_chars(struct uart_amba_port *uap)
......@@ -1262,7 +1282,7 @@ __acquires(&uap->port.lock)
dev_dbg(uap->port.dev, "could not trigger RX DMA job "
"fall back to interrupt mode again\n");
uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
} else {
#ifdef CONFIG_DMA_ENGINE
/* Start Rx DMA poll */
......@@ -1283,10 +1303,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
bool from_irq)
{
if (unlikely(!from_irq) &&
readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
return false; /* unable to transmit character */
writew(c, uap->port.membase + REG_DR);
pl011_writew(uap, c, REG_DR);
uap->port.icount.tx++;
return true;
......@@ -1333,7 +1353,7 @@ static void pl011_modem_status(struct uart_amba_port *uap)
{
unsigned int status, delta;
status = readw(uap->port.membase + REG_FR) & UART01x_FR_MODEM_ANY;
status = pl011_readw(uap, REG_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
......@@ -1361,15 +1381,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
return;
/* workaround to make sure that all bits are unlocked.. */
writew(0x00, uap->port.membase + REG_ICR);
pl011_writew(uap, 0x00, REG_ICR);
/*
* WA: introduce 26ns(1 uart clk) delay before W1C;
* single apb access will incur 2 pclk(133.12Mhz) delay,
* so add 2 dummy reads
*/
dummy_read = readw(uap->port.membase + REG_ICR);
dummy_read = readw(uap->port.membase + REG_ICR);
dummy_read = pl011_readw(uap, REG_ICR);
dummy_read = pl011_readw(uap, REG_ICR);
}
static irqreturn_t pl011_int(int irq, void *dev_id)
......@@ -1381,15 +1401,13 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
int handled = 0;
spin_lock_irqsave(&uap->port.lock, flags);
imsc = readw(uap->port.membase + REG_IMSC);
status = readw(uap->port.membase + REG_RIS) & imsc;
imsc = pl011_readw(uap, REG_IMSC);
status = pl011_readw(uap, REG_RIS) & imsc;
if (status) {
do {
check_apply_cts_event_workaround(uap);
writew(status & ~(UART011_TXIS|UART011_RTIS|
UART011_RXIS),
uap->port.membase + REG_ICR);
pl011_writew(uap, status & ~(UART011_TXIS|UART011_RTIS|
UART011_RXIS), REG_ICR);
if (status & (UART011_RTIS|UART011_RXIS)) {
if (pl011_dma_rx_running(uap))
......@@ -1406,7 +1424,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (pass_counter-- == 0)
break;
status = readw(uap->port.membase + REG_RIS) & imsc;
status = pl011_readw(uap, REG_RIS) & imsc;
} while (status != 0);
handled = 1;
}
......@@ -1420,7 +1438,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int status = readw(uap->port.membase + REG_FR);
unsigned int status = pl011_readw(uap, REG_FR);
return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}
......@@ -1429,7 +1447,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned int result = 0;
unsigned int status = readw(uap->port.membase + REG_FR);
unsigned int status = pl011_readw(uap, REG_FR);
#define TIOCMBIT(uartbit, tiocmbit) \
if (status & uartbit) \
......@@ -1449,7 +1467,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
container_of(port, struct uart_amba_port, port);
unsigned int cr;
cr = readw(uap->port.membase + REG_CR);
cr = pl011_readw(uap, REG_CR);
#define TIOCMBIT(tiocmbit, uartbit) \
if (mctrl & tiocmbit) \
......@@ -1469,7 +1487,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
}
#undef TIOCMBIT
writew(cr, uap->port.membase + REG_CR);
pl011_writew(uap, cr, REG_CR);
}
static void pl011_break_ctl(struct uart_port *port, int break_state)
......@@ -1480,12 +1498,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
lcr_h = readw(uap->port.membase + uap->lcrh_tx);
lcr_h = pl011_readw(uap, uap->lcrh_tx);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
writew(lcr_h, uap->port.membase + uap->lcrh_tx);
pl011_writew(uap, lcr_h, uap->lcrh_tx);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
......@@ -1495,9 +1513,8 @@ static void pl011_quiesce_irqs(struct uart_port *port)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
unsigned char __iomem *regs = uap->port.membase;
writew(readw(regs + REG_MIS), regs + REG_ICR);
pl011_writew(uap, pl011_readw(uap, REG_MIS), REG_ICR);
/*
* There is no way to clear TXIM as this is "ready to transmit IRQ", so
* we simply mask it. start_tx() will unmask it.
......@@ -1511,7 +1528,7 @@ static void pl011_quiesce_irqs(struct uart_port *port)
* (including tx queue), so we're also fine with start_tx()'s caller
* side.
*/
writew(readw(regs + REG_IMSC) & ~UART011_TXIM, regs + REG_IMSC);
pl011_writew(uap, pl011_readw(uap, REG_IMSC) & ~UART011_TXIM, REG_IMSC);
}
static int pl011_get_poll_char(struct uart_port *port)
......@@ -1526,11 +1543,11 @@ static int pl011_get_poll_char(struct uart_port *port)
*/
pl011_quiesce_irqs(port);
status = readw(uap->port.membase + REG_FR);
status = pl011_readw(uap, REG_FR);
if (status & UART01x_FR_RXFE)
return NO_POLL_CHAR;
return readw(uap->port.membase + REG_DR);
return pl011_readw(uap, REG_DR);
}
static void pl011_put_poll_char(struct uart_port *port,
......@@ -1539,10 +1556,10 @@ static void pl011_put_poll_char(struct uart_port *port,
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
barrier();
writew(ch, uap->port.membase + REG_DR);
pl011_writew(uap, ch, REG_DR);
}
#endif /* CONFIG_CONSOLE_POLL */
......@@ -1566,15 +1583,15 @@ static int pl011_hwinit(struct uart_port *port)
uap->port.uartclk = clk_get_rate(uap->clk);
/* Clear pending error and receive interrupts */
writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS |
UART011_RTIS | UART011_RXIS, uap->port.membase + REG_ICR);
pl011_writew(uap, UART011_OEIS | UART011_BEIS | UART011_PEIS |
UART011_FEIS | UART011_RTIS | UART011_RXIS, REG_ICR);
/*
* Save interrupts enable mask, and enable RX interrupts in case if
* the interrupt is used for NMI entry.
*/
uap->im = readw(uap->port.membase + REG_IMSC);
writew(UART011_RTIM | UART011_RXIM, uap->port.membase + REG_IMSC);
uap->im = pl011_readw(uap, REG_IMSC);
pl011_writew(uap, UART011_RTIM | UART011_RXIM, REG_IMSC);
if (dev_get_platdata(uap->port.dev)) {
struct amba_pl011_data *plat;
......@@ -1588,7 +1605,7 @@ static int pl011_hwinit(struct uart_port *port)
static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
{
writew(lcr_h, uap->port.membase + uap->lcrh_rx);
pl011_writew(uap, lcr_h, uap->lcrh_rx);
if (uap->lcrh_rx != uap->lcrh_tx) {
int i;
/*
......@@ -1596,14 +1613,14 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
* to get this delay write read only register 10 times
*/
for (i = 0; i < 10; ++i)
writew(0xff, uap->port.membase + REG_MIS);
writew(lcr_h, uap->port.membase + uap->lcrh_tx);
pl011_writew(uap, 0xff, REG_MIS);
pl011_writew(uap, lcr_h, uap->lcrh_tx);
}
}
static int pl011_allocate_irq(struct uart_amba_port *uap)
{
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
}
......@@ -1618,12 +1635,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap)
spin_lock_irq(&uap->port.lock);
/* Clear out any spuriously appearing RX interrupts */
writew(UART011_RTIS | UART011_RXIS,
uap->port.membase + REG_ICR);
pl011_writew(uap, UART011_RTIS | UART011_RXIS, REG_ICR);
uap->im = UART011_RTIM;
if (!pl011_dma_rx_running(uap))
uap->im |= UART011_RXIM;
writew(uap->im, uap->port.membase + REG_IMSC);
pl011_writew(uap, uap->im, REG_IMSC);
spin_unlock_irq(&uap->port.lock);
}
......@@ -1642,21 +1658,21 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
writew(uap->vendor->ifls, uap->port.membase + REG_IFLS);
pl011_writew(uap, uap->vendor->ifls, REG_IFLS);
spin_lock_irq(&uap->port.lock);
/* restore RTS and DTR */
cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
writew(cr, uap->port.membase + REG_CR);
pl011_writew(uap, cr, REG_CR);
spin_unlock_irq(&uap->port.lock);
/*
* initialise the old status of the modem signals
*/
uap->old_status = readw(uap->port.membase + REG_FR) &
uap->old_status = pl011_readw(uap, REG_FR) &
UART01x_FR_MODEM_ANY;
/* Startup DMA */
......@@ -1698,9 +1714,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
{
unsigned long val;
val = readw(uap->port.membase + lcrh);
val = pl011_readw(uap, lcrh);
val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
writew(val, uap->port.membase + lcrh);
pl011_writew(uap, val, lcrh);
}
/*
......@@ -1714,11 +1730,11 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
uap->autorts = false;
spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + REG_CR);
cr = pl011_readw(uap, REG_CR);
uap->old_cr = cr;
cr &= UART011_CR_RTS | UART011_CR_DTR;
cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(cr, uap->port.membase + REG_CR);
pl011_writew(uap, cr, REG_CR);
spin_unlock_irq(&uap->port.lock);
/*
......@@ -1735,8 +1751,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap)
/* mask all interrupts and clear all pending ones */
uap->im = 0;
writew(uap->im, uap->port.membase + REG_IMSC);
writew(0xffff, uap->port.membase + REG_ICR);
pl011_writew(uap, uap->im, REG_IMSC);
pl011_writew(0xffff, REG_ICR);
spin_unlock_irq(&uap->port.lock);
}
......@@ -1888,8 +1904,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
pl011_enable_ms(port);
/* first, disable everything */
old_cr = readw(port->membase + REG_CR);
writew(0, port->membase + REG_CR);
old_cr = pl011_readw(uap, REG_CR);
pl011_writew(uap, 0, REG_CR);
if (termios->c_cflag & CRTSCTS) {
if (old_cr & UART011_CR_RTS)
......@@ -1922,8 +1938,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
quot -= 2;
}
/* Set baud rate */
writew(quot & 0x3f, port->membase + REG_FBRD);
writew(quot >> 6, port->membase + REG_IBRD);
pl011_writew(uap, quot & 0x3f, REG_FBRD);
pl011_writew(uap, quot >> 6, REG_IBRD);
/*
* ----------v----------v----------v----------v-----
......@@ -1932,7 +1948,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* ----------^----------^----------^----------^-----
*/
pl011_write_lcr_h(uap, lcr_h);
writew(old_cr, port->membase + REG_CR);
pl011_writew(uap, old_cr, REG_CR);
spin_unlock_irqrestore(&port->lock, flags);
}
......@@ -2073,9 +2089,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
while (readw(uap->port.membase + REG_FR) & UART01x_FR_TXFF)
while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
barrier();
writew(ch, uap->port.membase + REG_DR);
pl011_writew(uap, ch, REG_DR);
}
static void
......@@ -2100,10 +2116,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* First save the CR then disable the interrupts
*/
if (!uap->vendor->always_enabled) {
old_cr = readw(uap->port.membase + REG_CR);
old_cr = pl011_readw(uap, REG_CR);
new_cr = old_cr & ~UART011_CR_CTSEN;
new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
writew(new_cr, uap->port.membase + REG_CR);
pl011_writew(uap, new_cr, REG_CR);
}
uart_console_write(&uap->port, s, count, pl011_console_putchar);
......@@ -2113,10 +2129,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
* and restore the TCR
*/
do {
status = readw(uap->port.membase + REG_FR);
status = pl011_readw(uap, REG_FR);
} while (status & UART01x_FR_BUSY);
if (!uap->vendor->always_enabled)
writew(old_cr, uap->port.membase + REG_CR);
pl011_writew(uap, old_cr, REG_CR);
if (locked)
spin_unlock(&uap->port.lock);
......@@ -2129,10 +2145,10 @@ static void __init
pl011_console_get_options(struct uart_amba_port *uap, int *baud,
int *parity, int *bits)
{
if (readw(uap->port.membase + REG_CR) & UART01x_CR_UARTEN) {
if (pl011_readw(uap, REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
lcr_h = readw(uap->port.membase + uap->lcrh_tx);
lcr_h = pl011_readw(uap, uap->lcrh_tx);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
......@@ -2147,13 +2163,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
else
*bits = 8;
ibrd = readw(uap->port.membase + REG_IBRD);
fbrd = readw(uap->port.membase + REG_FBRD);
ibrd = pl011_readw(uap, REG_IBRD);
fbrd = pl011_readw(uap, REG_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
if (uap->vendor->oversampling) {
if (readw(uap->port.membase + REG_CR)
if (pl011_readw(uap, REG_CR)
& ST_UART011_CR_OVSFACT)
*baud *= 2;
}
......@@ -2225,10 +2241,13 @@ static struct console amba_console = {
static void pl011_putc(struct uart_port *port, int c)
{
while (readl(port->membase + REG_FR) & UART01x_FR_TXFF)
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
while (pl011_readw(uap, REG_FR) & UART01x_FR_TXFF)
;
writeb(c, port->membase + REG_DR);
while (readl(port->membase + REG_FR) & UART01x_FR_BUSY)
pl011_writeb(uap, c, REG_DR);
while (pl011_readw(uap, REG_FR) & UART01x_FR_BUSY)
;
}
......@@ -2355,8 +2374,8 @@ static int pl011_register_port(struct uart_amba_port *uap)
int ret;
/* Ensure interrupts from this UART are masked and cleared */
writew(0, uap->port.membase + REG_IMSC);
writew(0xffff, uap->port.membase + REG_ICR);
pl011_writew(uap, 0, REG_IMSC);
pl011_writew(uap, 0xffff, REG_ICR);
if (!amba_reg.state) {
ret = uart_register_driver(&amba_reg);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7