Merge tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "Again, cpufreq gets more changes than the other parts this time (one
  new driver, one old driver less, a bunch of enhancements of the
  existing code, new CPU IDs, fixes, cleanups)

  There also are some changes in cpuidle (idle injection rework, a
  couple of new CPU IDs, online/offline rework in intel_idle, fixes and
  cleanups), in the generic power domains framework (mostly related to
  supporting power domains containing CPUs), and in the Operating
  Performance Points (OPP) library (mostly related to supporting devices
  with multiple voltage regulators)

  In addition to that, the system sleep state selection interface is
  modified to make it easier for distributions with unchanged user space
  to support suspend-to-idle as the default system suspend method, some
  issues are fixed in the PM core, the latency tolerance PM QoS
  framework is improved a bit, the Intel RAPL power capping driver is
  cleaned up and there are some fixes and cleanups in the devfreq
  subsystem

  Specifics:

   - New cpufreq driver for Broadcom STB SoCs and a Device Tree binding
     for it (Markus Mayer)

   - Support for ARM Integrator/AP and Integrator/CP in the generic DT
     cpufreq driver and elimination of the old Integrator cpufreq driver
     (Linus Walleij)

   - Support for the zx296718, r8a7743 and r8a7745, Socionext UniPhier,
     and PXA SoCs in the the generic DT cpufreq driver (Baoyou Xie,
     Geert Uytterhoeven, Masahiro Yamada, Robert Jarzmik)

   - cpufreq core fix to eliminate races that may lead to using inactive
     policy objects and related cleanups (Rafael Wysocki)

   - cpufreq schedutil governor update to make it use SCHED_FIFO kernel
     threads (instead of regular workqueues) for doing delayed work (to
     reduce the response latency in some cases) and related cleanups
     (Viresh Kumar)

   - New cpufreq sysfs attribute for resetting statistics (Markus Mayer)

   - cpufreq governors fixes and cleanups (Chen Yu, Stratos Karafotis,
     Viresh Kumar)

   - Support for using generic cpufreq governors in the intel_pstate
     driver (Rafael Wysocki)

   - Support for per-logical-CPU P-state limits and the EPP/EPB (Energy
     Performance Preference/Energy Performance Bias) knobs in the
     intel_pstate driver (Srinivas Pandruvada)

   - New CPU ID for Knights Mill in intel_pstate (Piotr Luc)

   - intel_pstate driver modification to use the P-state selection
     algorithm based on CPU load on platforms with the system profile in
     the ACPI tables set to "mobile" (Srinivas Pandruvada)

   - intel_pstate driver cleanups (Arnd Bergmann, Rafael Wysocki,
     Srinivas Pandruvada)

   - cpufreq powernv driver updates including fast switching support
     (for the schedutil governor), fixes and cleanus (Akshay Adiga,
     Andrew Donnellan, Denis Kirjanov)

   - acpi-cpufreq driver rework to switch it over to the new CPU
     offline/online state machine (Sebastian Andrzej Siewior)

   - Assorted cleanups in cpufreq drivers (Wei Yongjun, Prashanth
     Prakash)

   - Idle injection rework (to make it use the regular idle path instead
     of a home-grown custom one) and related powerclamp thermal driver
     updates (Peter Zijlstra, Jacob Pan, Petr Mladek, Sebastian Andrzej
     Siewior)

   - New CPU IDs for Atom Z34xx and Knights Mill in intel_idle (Andy
     Shevchenko, Piotr Luc)

   - intel_idle driver cleanups and switch over to using the new CPU
     offline/online state machine (Anna-Maria Gleixner, Sebastian
     Andrzej Siewior)

   - cpuidle DT driver update to support suspend-to-idle properly
     (Sudeep Holla)

   - cpuidle core cleanups and misc updates (Daniel Lezcano, Pan Bian,
     Rafael Wysocki)

   - Preliminary support for power domains including CPUs in the generic
     power domains (genpd) framework and related DT bindings (Lina Iyer)

   - Assorted fixes and cleanups in the generic power domains (genpd)
     framework (Colin Ian King, Dan Carpenter, Geert Uytterhoeven)

   - Preliminary support for devices with multiple voltage regulators
     and related fixes and cleanups in the Operating Performance Points
     (OPP) library (Viresh Kumar, Masahiro Yamada, Stephen Boyd)

   - System sleep state selection interface rework to make it easier to
     support suspend-to-idle as the default system suspend method
     (Rafael Wysocki)

   - PM core fixes and cleanups, mostly related to the interactions
     between the system suspend and runtime PM frameworks (Ulf Hansson,
     Sahitya Tummala, Tony Lindgren)

   - Latency tolerance PM QoS framework imorovements (Andrew Lutomirski)

   - New Knights Mill CPU ID for the Intel RAPL power capping driver
     (Piotr Luc)

   - Intel RAPL power capping driver fixes, cleanups and switch over to
     using the new CPU offline/online state machine (Jacob Pan, Thomas
     Gleixner, Sebastian Andrzej Siewior)

   - Fixes and cleanups in the exynos-ppmu, exynos-nocp, rk3399_dmc,
     rockchip-dfi devfreq drivers and the devfreq core (Axel Lin,
     Chanwoo Choi, Javier Martinez Canillas, MyungJoo Ham, Viresh Kumar)

   - Fix for false-positive KASAN warnings during resume from ACPI S3
     (suspend-to-RAM) on x86 (Josh Poimboeuf)

   - Memory map verification during resume from hibernation on x86 to
     ensure a consistent address space layout (Chen Yu)

   - Wakeup sources debugging enhancement (Xing Wei)

   - rockchip-io AVS driver cleanup (Shawn Lin)"

* tag 'pm-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (127 commits)
  devfreq: rk3399_dmc: Don't use OPP structures outside of RCU locks
  devfreq: rk3399_dmc: Remove dangling rcu_read_unlock()
  devfreq: exynos: Don't use OPP structures outside of RCU locks
  Documentation: intel_pstate: Document HWP energy/performance hints
  cpufreq: intel_pstate: Support for energy performance hints with HWP
  cpufreq: intel_pstate: Add locking around HWP requests
  PM / sleep: Print active wakeup sources when blocking on wakeup_count reads
  PM / core: Fix bug in the error handling of async suspend
  PM / wakeirq: Fix dedicated wakeirq for drivers not using autosuspend
  PM / Domains: Fix compatible for domain idle state
  PM / OPP: Don't WARN on multiple calls to dev_pm_opp_set_regulators()
  PM / OPP: Allow platform specific custom set_opp() callbacks
  PM / OPP: Separate out _generic_set_opp()
  PM / OPP: Add infrastructure to manage multiple regulators
  PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage()
  PM / OPP: Manage supply's voltage/current in a separate structure
  PM / OPP: Don't use OPP structure outside of rcu protected section
  PM / OPP: Reword binding supporting multiple regulators per device
  PM / OPP: Fix incorrect cpu-supply property in binding
  cpuidle: Add a kerneldoc comment to cpuidle_use_deepest_state()
  ..

Documentation/ABI/testing/sysfs-power

@@ -7,30 +7,35 @@ Description:
 		subsystem.
 
 What:		/sys/power/state
-Date:		May 2014
+Date:		November 2016
 Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
 Description:
 		The /sys/power/state file controls system sleep states.
 		Reading from this file returns the available sleep state
-		labels, which may be "mem", "standby", "freeze" and "disk"
-		(hibernation).  The meanings of the first three labels depend on
-		the relative_sleep_states command line argument as follows:
-		 1) relative_sleep_states = 1
-		    "mem", "standby", "freeze" represent non-hibernation sleep
-		    states from the deepest ("mem", always present) to the
-		    shallowest ("freeze").  "standby" and "freeze" may or may
-		    not be present depending on the capabilities of the
-		    platform.  "freeze" can only be present if "standby" is
-		    present.
-		 2) relative_sleep_states = 0 (default)
-		    "mem" - "suspend-to-RAM", present if supported.
-		    "standby" - "power-on suspend", present if supported.
-		    "freeze" - "suspend-to-idle", always present.
-
-		Writing to this file one of these strings causes the system to
-		transition into the corresponding state, if available.  See
-		Documentation/power/states.txt for a description of what
-		"suspend-to-RAM", "power-on suspend" and "suspend-to-idle" mean.
+		labels, which may be "mem" (suspend), "standby" (power-on
+		suspend), "freeze" (suspend-to-idle) and "disk" (hibernation).
+
+		Writing one of the above strings to this file causes the system
+		to transition into the corresponding state, if available.
+
+		See Documentation/power/states.txt for more information.
+
+What:		/sys/power/mem_sleep
+Date:		November 2016
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/power/mem_sleep file controls the operating mode of
+		system suspend.  Reading from it returns the available modes
+		as "s2idle" (always present), "shallow" and "deep" (present if
+		supported).  The mode that will be used on subsequent attempts
+		to suspend the system (by writing "mem" to the /sys/power/state
+		file described above) is enclosed in square brackets.
+
+		Writing one of the above strings to this file causes the mode
+		represented by it to be used on subsequent attempts to suspend
+		the system.
+
+		See Documentation/power/states.txt for more information.
 
 What:		/sys/power/disk
 Date:		September 2006

Documentation/admin-guide/kernel-parameters.txt

@@ -1560,6 +1560,12 @@
 		       disable
 		         Do not enable intel_pstate as the default
 		         scaling driver for the supported processors
+		       passive
+			 Use intel_pstate as a scaling driver, but configure it
+			 to work with generic cpufreq governors (instead of
+			 enabling its internal governor).  This mode cannot be
+			 used along with the hardware-managed P-states (HWP)
+			 feature.
 		       force
 			 Enable intel_pstate on systems that prohibit it by default
 			 in favor of acpi-cpufreq. Forcing the intel_pstate driver
@@ -1580,6 +1586,9 @@
 			Description Table, specifies preferred power management
 			profile as "Enterprise Server" or "Performance Server",
 			then this feature is turned on by default.
+		per_cpu_perf_limits
+			Allow per-logical-CPU P-State performance control limits using
+			cpufreq sysfs interface
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)
@@ -2122,6 +2131,12 @@
 			memory contents and reserves bad memory
 			regions that are detected.
 
+	mem_sleep_default=	[SUSPEND] Default system suspend mode:
+			s2idle  - Suspend-To-Idle
+			shallow - Power-On Suspend or equivalent (if supported)
+			deep    - Suspend-To-RAM or equivalent (if supported)
+			See Documentation/power/states.txt.
+
 	meye.*=		[HW] Set MotionEye Camera parameters
 			See Documentation/video4linux/meye.txt.
 
@@ -3475,13 +3490,6 @@
 			[KNL, SMP] Set scheduler's default relax_domain_level.
 			See Documentation/cgroup-v1/cpusets.txt.
 
-	relative_sleep_states=
-			[SUSPEND] Use sleep state labeling where the deepest
-			state available other than hibernation is always "mem".
-			Format: { "0" | "1" }
-			0 -- Traditional sleep state labels.
-			1 -- Relative sleep state labels.
-
 	reserve=	[KNL,BUGS] Force the kernel to ignore some iomem area
 
 	reservetop=	[X86-32]

Documentation/cpu-freq/cpufreq-stats.txt

@@ -44,11 +44,17 @@ the stats driver insertion.
 total 0
 drwxr-xr-x  2 root root    0 May 14 16:06 .
 drwxr-xr-x  3 root root    0 May 14 15:58 ..
+--w-------  1 root root 4096 May 14 16:06 reset
 -r--r--r--  1 root root 4096 May 14 16:06 time_in_state
 -r--r--r--  1 root root 4096 May 14 16:06 total_trans
 -r--r--r--  1 root root 4096 May 14 16:06 trans_table
 --------------------------------------------------------------------------------
 
+-  reset
+Write-only attribute that can be used to reset the stat counters. This can be
+useful for evaluating system behaviour under different governors without the
+need for a reboot.
+
 -  time_in_state
 This gives the amount of time spent in each of the frequencies supported by
 this CPU. The cat output will have "<frequency> <time>" pair in each line, which

Documentation/cpu-freq/intel-pstate.txt

@@ -48,7 +48,7 @@ In addition to the frequency-controlling interfaces provided by the cpufreq
 core, the driver provides its own sysfs files to control the P-State selection.
 These files have been added to /sys/devices/system/cpu/intel_pstate/.
 Any changes made to these files are applicable to all CPUs (even in a
-multi-package system).
+multi-package system, Refer to later section on placing "Per-CPU limits").
 
       max_perf_pct: Limits the maximum P-State that will be requested by
       the driver. It states it as a percentage of the available performance. The
@@ -120,13 +120,57 @@ frequency is fictional for Intel Core processors. Even if the scaling
 driver selects a single P-State, the actual frequency the processor
 will run at is selected by the processor itself.
 
+Per-CPU limits
+
+The kernel command line option "intel_pstate=per_cpu_perf_limits" forces
+the intel_pstate driver to use per-CPU performance limits.  When it is set,
+the sysfs control interface described above is subject to limitations.
+- The following controls are not available for both read and write
+	/sys/devices/system/cpu/intel_pstate/max_perf_pct
+	/sys/devices/system/cpu/intel_pstate/min_perf_pct
+- The following controls can be used to set performance limits, as far as the
+architecture of the processor permits:
+	/sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
+	/sys/devices/system/cpu/cpu*/cpufreq/scaling_min_freq
+	/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
+- User can still observe turbo percent and number of P-States from
+	/sys/devices/system/cpu/intel_pstate/turbo_pct
+	/sys/devices/system/cpu/intel_pstate/num_pstates
+- User can read write system wide turbo status
+	/sys/devices/system/cpu/no_turbo
+
+Support of energy performance hints
+It is possible to provide hints to the HWP algorithms in the processor
+to be more performance centric to more energy centric. When the driver
+is using HWP, two additional cpufreq sysfs attributes are presented for
+each logical CPU.
+These attributes are:
+	- energy_performance_available_preferences
+	- energy_performance_preference
+
+To get list of supported hints:
+$ cat energy_performance_available_preferences
+    default performance balance_performance balance_power power
+
+The current preference can be read or changed via cpufreq sysfs
+attribute "energy_performance_preference". Reading from this attribute
+will display current effective setting. User can write any of the valid
+preference string to this attribute. User can always restore to power-on
+default by writing "default".
+
+Since threads can migrate to different CPUs, this is possible that the
+new CPU may have different energy performance preference than the previous
+one. To avoid such issues, either threads can be pinned to specific CPUs
+or set the same energy performance preference value to all CPUs.
+
 Tuning Intel P-State driver
 
-When HWP mode is not used, debugfs files have also been added to allow the
-tuning of the internal governor algorithm. These files are located at
-/sys/kernel/debug/pstate_snb/. The algorithm uses a PID (Proportional
-Integral Derivative) controller. The PID tunable parameters are:
+When the performance can be tuned using PID (Proportional Integral
+Derivative) controller, debugfs files are provided for adjusting performance.
+They are presented under:
+/sys/kernel/debug/pstate_snb/
 
+The PID tunable parameters are:
       deadband
       d_gain_pct
       i_gain_pct

Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt

+Broadcom AVS mail box and interrupt register bindings
+=====================================================
+
+A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
+references the mailbox register used to communicate with the AVS CPU[1]. The
+second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
+the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
+command sent to it by a driver. Interrupting the AVS CPU is mandatory for
+commands to be processed.
+
+The interface also requires a reference to the AVS host interrupt controller,
+so a driver can react to interrupts generated by the AVS CPU whenever a command
+has been processed. See [2] for more information on the brcm,l2-intc node.
+
+[1] The AVS CPU is an independent co-processor that runs proprietary
+firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
+Adaptive Voltage Scaling.
+
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+
+
+Node brcm,avs-cpu-data-mem
+--------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-data-mem and
+              should include: one of brcm,bcm7271-avs-cpu-data-mem or
+                              brcm,bcm7268-avs-cpu-data-mem
+- reg: Specifies base physical address and size of the registers.
+- interrupts: The interrupt that the AVS CPU will use to interrupt the host
+              when a command completed.
+- interrupt-parent: The interrupt controller the above interrupt is routed
+                    through.
+- interrupt-names: The name of the interrupt used to interrupt the host.
+
+Optional properties:
+- None
+
+Node brcm,avs-cpu-l2-intr
+-------------------------
+
+Required properties:
+- compatible: must include: brcm,avs-cpu-l2-intr and
+              should include: one of brcm,bcm7271-avs-cpu-l2-intr or
+                              brcm,bcm7268-avs-cpu-l2-intr
+- reg: Specifies base physical address and size of the registers.
+
+Optional properties:
+- None
+
+
+Example
+=======
+
+	avs_host_l2_intc: interrupt-controller@f04d1200 {
+		#interrupt-cells = <1>;
+		compatible = "brcm,l2-intc";
+		interrupt-parent = <&intc>;
+		reg = <0xf04d1200 0x48>;
+		interrupt-controller;
+		interrupts = <0x0 0x19 0x0>;
+		interrupt-names = "avs";
+	};
+
+	avs-cpu-data-mem@f04c4000 {
+		compatible = "brcm,bcm7271-avs-cpu-data-mem",
+				"brcm,avs-cpu-data-mem";
+		reg = <0xf04c4000 0x60>;
+		interrupts = <0x1a>;
+		interrupt-parent = <&avs_host_l2_intc>;
+		interrupt-names = "sw_intr";
+	};
+
+	avs-cpu-l2-intr@f04d1100 {
+		compatible = "brcm,bcm7271-avs-cpu-l2-intr",
+				"brcm,avs-cpu-l2-intr";
+		reg = <0xf04d1100 0x10>;
+	};

Documentation/devicetree/bindings/opp/opp.txt

@@ -86,8 +86,14 @@ Optional properties:
   Single entry is for target voltage and three entries are for <target min max>
   voltages.
 
-  Entries for multiple regulators must be present in the same order as
-  regulators are specified in device's DT node.
+  Entries for multiple regulators shall be provided in the same field separated
+  by angular brackets <>. The OPP binding doesn't provide any provisions to
+  relate the values to their power supplies or the order in which the supplies
+  need to be configured and that is left for the implementation specific
+  binding.
+
+  Entries for all regulators shall be of the same size, i.e. either all use a
+  single value or triplets.
 
 - opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
   the above opp-microvolt property, but allows multiple voltage ranges to be
@@ -104,10 +110,13 @@ Optional properties:
 
   Should only be set if opp-microvolt is set for the OPP.
 
-  Entries for multiple regulators must be present in the same order as
-  regulators are specified in device's DT node. If this property isn't required
-  for few regulators, then this should be marked as zero for them. If it isn't
-  required for any regulator, then this property need not be present.
+  Entries for multiple regulators shall be provided in the same field separated
+  by angular brackets <>. If current values aren't required for a regulator,
+  then it shall be filled with 0. If current values aren't required for any of
+  the regulators, then this field is not required. The OPP binding doesn't
+  provide any provisions to relate the values to their power supplies or the
+  order in which the supplies need to be configured and that is left for the
+  implementation specific binding.
 
 - opp-microamp-<name>: Named opp-microamp property. Similar to
   opp-microvolt-<name> property, but for microamp instead.
@@ -386,10 +395,12 @@ Example 4: Handling multiple regulators
 / {
 	cpus {
 		cpu@0 {
-			compatible = "arm,cortex-a7";
+			compatible = "vendor,cpu-type";
 			...
 
-			cpu-supply = <&cpu_supply0>, <&cpu_supply1>, <&cpu_supply2>;
+			vcc0-supply = <&cpu_supply0>;
+			vcc1-supply = <&cpu_supply1>;
+			vcc2-supply = <&cpu_supply2>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};

Documentation/devicetree/bindings/power/domain-idle-state.txt

+PM Domain Idle State Node:
+
+A domain idle state node represents the state parameters that will be used to
+select the state when there are no active components in the domain.
+
+The state node has the following parameters -
+
+- compatible:
+	Usage: Required
+	Value type: <string>
+	Definition: Must be "domain-idle-state".
+
+- entry-latency-us
+	Usage: Required
+	Value type: <prop-encoded-array>
+	Definition: u32 value representing worst case latency in
+		    microseconds required to enter the idle state.
+		    The exit-latency-us duration may be guaranteed
+		    only after entry-latency-us has passed.
+
+- exit-latency-us
+	Usage: Required
+	Value type: <prop-encoded-array>
+	Definition: u32 value representing worst case latency
+		    in microseconds required to exit the idle state.
+
+- min-residency-us
+	Usage: Required
+	Value type: <prop-encoded-array>
+	Definition: u32 value representing minimum residency duration
+		    in microseconds after which the idle state will yield
+		    power benefits after overcoming the overhead in entering
+i		    the idle state.

Documentation/devicetree/bindings/power/power_domain.txt

@@ -29,6 +29,15 @@ Optional properties:
    specified by this binding. More details about power domain specifier are
    available in the next section.
 
+- domain-idle-states : A phandle of an idle-state that shall be soaked into a
+                generic domain power state. The idle state definitions are
+                compatible with domain-idle-state specified in [1].
+  The domain-idle-state property reflects the idle state of this PM domain and
+  not the idle states of the devices or sub-domains in the PM domain. Devices
+  and sub-domains have their own idle-states independent of the parent
+  domain's idle states. In the absence of this property, the domain would be
+  considered as capable of being powered-on or powered-off.
+
 Example:
 
 	power: power-controller@12340000 {
@@ -59,6 +68,38 @@ The nodes above define two power controllers: 'parent' and 'child'.
 Domains created by the 'child' power controller are subdomains of '0' power
 domain provided by the 'parent' power controller.
 
+Example 3:
+	parent: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12340000 0x1000>;
+		#power-domain-cells = <0>;
+		domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
+	};
+
+	child: power-controller@12341000 {
+		compatible = "foo,power-controller";
+		reg = <0x12341000 0x1000>;
+		power-domains = <&parent 0>;
+		#power-domain-cells = <0>;
+		domain-idle-states = <&DOMAIN_PWR_DN>;
+	};
+
+	DOMAIN_RET: state@0 {
+		compatible = "domain-idle-state";
+		reg = <0x0>;
+		entry-latency-us = <1000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <10000>;
+	};
+
+	DOMAIN_PWR_DN: state@1 {
+		compatible = "domain-idle-state";
+		reg = <0x1>;
+		entry-latency-us = <5000>;
+		exit-latency-us = <8000>;
+		min-residency-us = <7000>;
+	};
+
 ==PM domain consumers==
 
 Required properties:
@@ -76,3 +117,5 @@ Example:
 The node above defines a typical PM domain consumer device, which is located
 inside a PM domain with index 0 of a power controller represented by a node
 with the label "power".
+
+[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt

Documentation/power/devices.txt

@@ -607,7 +607,9 @@ individually.  Instead, a set of devices sharing a power resource can be put
 into a low-power state together at the same time by turning off the shared
 power resource.  Of course, they also need to be put into the full-power state
 together, by turning the shared power resource on.  A set of devices with this
-property is often referred to as a power domain.
+property is often referred to as a power domain. A power domain may also be
+nested inside another power domain. The nested domain is referred to as the
+sub-domain of the parent domain.
 
 Support for power domains is provided through the pm_domain field of struct
 device.  This field is a pointer to an object of type struct dev_pm_domain,
@@ -629,6 +631,16 @@ support for power domains into subsystem-level callbacks, for example by
 modifying the platform bus type.  Other platforms need not implement it or take
 it into account in any way.
 
+Devices may be defined as IRQ-safe which indicates to the PM core that their
+runtime PM callbacks may be invoked with disabled interrupts (see
+Documentation/power/runtime_pm.txt for more information).  If an IRQ-safe
+device belongs to a PM domain, the runtime PM of the domain will be
+disallowed, unless the domain itself is defined as IRQ-safe. However, it
+makes sense to define a PM domain as IRQ-safe only if all the devices in it
+are IRQ-safe. Moreover, if an IRQ-safe domain has a parent domain, the runtime
+PM of the parent is only allowed if the parent itself is IRQ-safe too with the
+additional restriction that all child domains of an IRQ-safe parent must also
+be IRQ-safe.
 
 Device Low Power (suspend) States
 ---------------------------------

Documentation/power/states.txt

@@ -8,25 +8,43 @@ for each state.
 
 The states are represented by strings that can be read or written to the
 /sys/power/state file.  Those strings may be "mem", "standby", "freeze" and
-"disk", where the last one always represents hibernation (Suspend-To-Disk) and
-the meaning of the remaining ones depends on the relative_sleep_states command
-line argument.
-
-For relative_sleep_states=1, the strings "mem", "standby" and "freeze" label the
-available non-hibernation sleep states from the deepest to the shallowest,
-respectively.  In that case, "mem" is always present in /sys/power/state,
-because there is at least one non-hibernation sleep state in every system.  If
-the given system supports two non-hibernation sleep states, "standby" is present
-in /sys/power/state in addition to "mem".  If the system supports three
-non-hibernation sleep states, "freeze" will be present in /sys/power/state in
-addition to "mem" and "standby".
-
-For relative_sleep_states=0, which is the default, the following descriptions
-apply.
-
-state:		Suspend-To-Idle
+"disk", where the last three always represent Power-On Suspend (if supported),
+Suspend-To-Idle and hibernation (Suspend-To-Disk), respectively.
+
+The meaning of the "mem" string is controlled by the /sys/power/mem_sleep file.
+It contains strings representing the available modes of system suspend that may
+be triggered by writing "mem" to /sys/power/state.  These modes are "s2idle"
+(Suspend-To-Idle), "shallow" (Power-On Suspend) and "deep" (Suspend-To-RAM).
+The "s2idle" mode is always available, while the other ones are only available
+if supported by the platform (if not supported, the strings representing them
+are not present in /sys/power/mem_sleep).  The string representing the suspend
+mode to be used subsequently is enclosed in square brackets.  Writing one of
+the other strings present in /sys/power/mem_sleep to it causes the suspend mode
+to be used subsequently to change to the one represented by that string.
+
+Consequently, there are two ways to cause the system to go into the
+Suspend-To-Idle sleep state.  The first one is to write "freeze" directly to
+/sys/power/state.  The second one is to write "s2idle" to /sys/power/mem_sleep
+and then to wrtie "mem" to /sys/power/state.  Similarly, there are two ways
+to cause the system to go into the Power-On Suspend sleep state (the strings to
+write to the control files in that case are "standby" or "shallow" and "mem",
+respectively) if that state is supported by the platform.  In turn, there is
+only one way to cause the system to go into the Suspend-To-RAM state (write
+"deep" into /sys/power/mem_sleep and "mem" into /sys/power/state).
+
+The default suspend mode (ie. the one to be used without writing anything into
+/sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
+"s2idle", but it can be overridden by the value of the "mem_sleep_default"
+parameter in the kernel command line.  On some ACPI-based systems, depending on
+the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
+is supported.
+
+The properties of all of the sleep states are described below.
+
+
+State:		Suspend-To-Idle
 ACPI state:	S0
-Label:		"freeze"
+Label:		"s2idle" ("freeze")
 
 This state is a generic, pure software, light-weight, system sleep state.
 It allows more energy to be saved relative to runtime idle by freezing user
@@ -35,13 +53,13 @@ lower-power than available at run time), such that the processors can
 spend more time in their idle states.
 
 This state can be used for platforms without Power-On Suspend/Suspend-to-RAM
-support, or it can be used in addition to Suspend-to-RAM (memory sleep)
-to provide reduced resume latency.  It is always supported.
+support, or it can be used in addition to Suspend-to-RAM to provide reduced
+resume latency.  It is always supported.
 
 
 State:		Standby / Power-On Suspend
 ACPI State:	S1
-Label:		"standby"
+Label:		"shallow" ("standby")
 
 This state, if supported, offers moderate, though real, power savings, while
 providing a relatively low-latency transition back to a working system.  No
@@ -58,7 +76,7 @@ state.
 
 State:		Suspend-to-RAM
 ACPI State:	S3
-Label:		"mem"
+Label:		"deep"
 
 This state, if supported, offers significant power savings as everything in the
 system is put into a low-power state, except for memory, which should be placed

MAINTAINERS

@@ -2764,6 +2764,14 @@ L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	drivers/mtd/nand/brcmnand/
 
+BROADCOM STB AVS CPUFREQ DRIVER
+M:	Markus Mayer <mmayer@broadcom.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+F:	drivers/cpufreq/brcmstb*
+
 BROADCOM SPECIFIC AMBA DRIVER (BCMA)
 M:	Rafał Miłecki <zajec5@gmail.com>
 L:	linux-wireless@vger.kernel.org
@@ -3356,6 +3364,7 @@ L:	linux-pm@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 T:	git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates)
+B:	https://bugzilla.kernel.org
 F:	Documentation/cpu-freq/
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -3395,6 +3404,7 @@ M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+B:	https://bugzilla.kernel.org
 F:	drivers/cpuidle/*
 F:	include/linux/cpuidle.h
 
@@ -6362,9 +6372,11 @@ S:	Maintained
 F:	drivers/platform/x86/intel-vbtn.c
 
 INTEL IDLE DRIVER
+M:	Jacob Pan <jacob.jun.pan@linux.intel.com>
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux.git
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/idle/intel_idle.c
 

arch/arm/mach-imx/gpc.c

@@ -380,13 +380,6 @@ static struct pu_domain imx6q_pu_domain = {
 		.name = "PU",
 		.power_off = imx6q_pm_pu_power_off,
 		.power_on = imx6q_pm_pu_power_on,
-		.states = {
-			[0] = {
-				.power_off_latency_ns = 25000,
-				.power_on_latency_ns = 2000000,
-			},
-		},
-		.state_count = 1,
 	},
 };
 
@@ -430,6 +423,16 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
 		return 0;
 
+	imx6q_pu_domain.base.states = devm_kzalloc(dev,
+					sizeof(*imx6q_pu_domain.base.states),
+					GFP_KERNEL);
+	if (!imx6q_pu_domain.base.states)
+		return -ENOMEM;
+
+	imx6q_pu_domain.base.states[0].power_off_latency_ns = 25000;
+	imx6q_pu_domain.base.states[0].power_on_latency_ns = 2000000;
+	imx6q_pu_domain.base.state_count = 1;
+
 	for (i = 0; i < ARRAY_SIZE(imx_gpc_domains); i++)
 		pm_genpd_init(imx_gpc_domains[i], NULL, false);
 

arch/x86/kernel/acpi/wakeup_64.S

@@ -109,6 +109,15 @@ ENTRY(do_suspend_lowlevel)
 	movq	pt_regs_r14(%rax), %r14
 	movq	pt_regs_r15(%rax), %r15
 
+#ifdef CONFIG_KASAN
+	/*
+	 * The suspend path may have poisoned some areas deeper in the stack,
+	 * which we now need to unpoison.
+	 */
+	movq	%rsp, %rdi
+	call	kasan_unpoison_task_stack_below
+#endif
+
 	xorl	%eax, %eax
 	addq	$8, %rsp
 	FRAME_END

arch/x86/power/hibernate_64.c

@@ -11,6 +11,10 @@
 #include <linux/gfp.h>
 #include <linux/smp.h>
 #include <linux/suspend.h>
+#include <linux/scatterlist.h>
+#include <linux/kdebug.h>
+
+#include <crypto/hash.h>
 
 #include <asm/init.h>
 #include <asm/proto.h>
@@ -177,14 +181,86 @@ int pfn_is_nosave(unsigned long pfn)
 	return (pfn >= nosave_begin_pfn) && (pfn < nosave_end_pfn);
 }
 
+#define MD5_DIGEST_SIZE 16
+
 struct restore_data_record {
 	unsigned long jump_address;
 	unsigned long jump_address_phys;
 	unsigned long cr3;
 	unsigned long magic;
+	u8 e820_digest[MD5_DIGEST_SIZE];
 };
 
-#define RESTORE_MAGIC	0x123456789ABCDEF0UL
+#define RESTORE_MAGIC	0x23456789ABCDEF01UL
+
+#if IS_BUILTIN(CONFIG_CRYPTO_MD5)
+/**
+ * get_e820_md5 - calculate md5 according to given e820 map
+ *
+ * @map: the e820 map to be calculated
+ * @buf: the md5 result to be stored to
+ */
+static int get_e820_md5(struct e820map *map, void *buf)
+{
+	struct scatterlist sg;
+	struct crypto_ahash *tfm;
+	int size;
+	int ret = 0;
+
+	tfm = crypto_alloc_ahash("md5", 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tfm))
+		return -ENOMEM;
+
+	{
+		AHASH_REQUEST_ON_STACK(req, tfm);
+		size = offsetof(struct e820map, map)
+			+ sizeof(struct e820entry) * map->nr_map;
+		ahash_request_set_tfm(req, tfm);
+		sg_init_one(&sg, (u8 *)map, size);
+		ahash_request_set_callback(req, 0, NULL, NULL);
+		ahash_request_set_crypt(req, &sg, buf, size);
+
+		if (crypto_ahash_digest(req))
+			ret = -EINVAL;
+		ahash_request_zero(req);
+	}
+	crypto_free_ahash(tfm);
+
+	return ret;
+}
+
+static void hibernation_e820_save(void *buf)
+{
+	get_e820_md5(e820_saved, buf);
+}
+
+static bool hibernation_e820_mismatch(void *buf)
+{
+	int ret;
+	u8 result[MD5_DIGEST_SIZE];
+
+	memset(result, 0, MD5_DIGEST_SIZE);
+	/* If there is no digest in suspend kernel, let it go. */
+	if (!memcmp(result, buf, MD5_DIGEST_SIZE))
+		return false;
+
+	ret = get_e820_md5(e820_saved, result);
+	if (ret)
+		return true;
+
+	return memcmp(result, buf, MD5_DIGEST_SIZE) ? true : false;
+}
+#else
+static void hibernation_e820_save(void *buf)
+{
+}
+
+static bool hibernation_e820_mismatch(void *buf)
+{
+	/* If md5 is not builtin for restore kernel, let it go. */
+	return false;
+}
+#endif
 
 /**
  *	arch_hibernation_header_save - populate the architecture specific part
@@ -201,6 +277,9 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
 	rdr->jump_address_phys = __pa_symbol(&restore_registers);
 	rdr->cr3 = restore_cr3;
 	rdr->magic = RESTORE_MAGIC;
+
+	hibernation_e820_save(rdr->e820_digest);
+
 	return 0;
 }
 
@@ -216,5 +295,16 @@ int arch_hibernation_header_restore(void *addr)
 	restore_jump_address = rdr->jump_address;
 	jump_address_phys = rdr->jump_address_phys;
 	restore_cr3 = rdr->cr3;
-	return (rdr->magic == RESTORE_MAGIC) ? 0 : -EINVAL;
+
+	if (rdr->magic != RESTORE_MAGIC) {
+		pr_crit("Unrecognized hibernate image header format!\n");
+		return -EINVAL;
+	}
+
+	if (hibernation_e820_mismatch(rdr->e820_digest)) {
+		pr_crit("Hibernate inconsistent memory map detected!\n");
+		return -ENODEV;
+	}
+
+	return 0;
 }

drivers/acpi/processor_perflib.c

@@ -157,7 +157,7 @@ static void acpi_processor_ppc_ost(acpi_handle handle, int status)
 				  status, NULL);
 }
 
-int acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
+void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
 {
 	int ret;
 
@@ -168,7 +168,7 @@ int acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
 		 */
 		if (event_flag)
 			acpi_processor_ppc_ost(pr->handle, 1);
-		return 0;
+		return;
 	}
 
 	ret = acpi_processor_get_platform_limit(pr);
@@ -182,10 +182,8 @@ int acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
 		else
 			acpi_processor_ppc_ost(pr->handle, 0);
 	}
-	if (ret < 0)
-		return (ret);
-	else
-		return cpufreq_update_policy(pr->id);
+	if (ret >= 0)
+		cpufreq_update_policy(pr->id);
 }
 
 int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
@@ -465,11 +463,33 @@ int acpi_processor_get_performance_info(struct acpi_processor *pr)
 	return result;
 }
 EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info);
-int acpi_processor_notify_smm(struct module *calling_module)
+
+int acpi_processor_pstate_control(void)
 {
 	acpi_status status;
-	static int is_done = 0;
 
+	if (!acpi_gbl_FADT.smi_command || !acpi_gbl_FADT.pstate_control)
+		return 0;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			  "Writing pstate_control [0x%x] to smi_command [0x%x]\n",
+			  acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
+
+	status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
+				    (u32)acpi_gbl_FADT.pstate_control, 8);
+	if (ACPI_SUCCESS(status))
+		return 1;
+
+	ACPI_EXCEPTION((AE_INFO, status,
+			"Failed to write pstate_control [0x%x] to smi_command [0x%x]",
+			acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
+	return -EIO;
+}
+
+int acpi_processor_notify_smm(struct module *calling_module)
+{
+	static int is_done = 0;
+	int result;
 
 	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
 		return -EBUSY;
@@ -492,26 +512,15 @@ int acpi_processor_notify_smm(struct module *calling_module)
 
 	is_done = -EIO;
 
-	/* Can't write pstate_control to smi_command if either value is zero */
-	if ((!acpi_gbl_FADT.smi_command) || (!acpi_gbl_FADT.pstate_control)) {
+	result = acpi_processor_pstate_control();
+	if (!result) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_control\n"));
 		module_put(calling_module);
 		return 0;
 	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "Writing pstate_control [0x%x] to smi_command [0x%x]\n",
-			  acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
-
-	status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
-				    (u32) acpi_gbl_FADT.pstate_control, 8);
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Failed to write pstate_control [0x%x] to "
-				"smi_command [0x%x]", acpi_gbl_FADT.pstate_control,
-				acpi_gbl_FADT.smi_command));
+	if (result < 0) {
 		module_put(calling_module);
-		return status;
+		return result;
 	}
 
 	/* Success. If there's no _PPC, we need to fear nothing, so

drivers/acpi/sleep.c

@@ -674,6 +674,14 @@ static void acpi_sleep_suspend_setup(void)
 		if (acpi_sleep_state_supported(i))
 			sleep_states[i] = 1;
 
+	/*
+	 * Use suspend-to-idle by default if ACPI_FADT_LOW_POWER_S0 is set and
+	 * the default suspend mode was not selected from the command line.
+	 */
+	if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0 &&
+	    mem_sleep_default > PM_SUSPEND_MEM)
+		mem_sleep_default = PM_SUSPEND_FREEZE;
+
 	suspend_set_ops(old_suspend_ordering ?
 		&acpi_suspend_ops_old : &acpi_suspend_ops);
 	freeze_set_ops(&acpi_freeze_ops);

drivers/base/power/main.c

@@ -1460,10 +1460,10 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	dpm_watchdog_clear(&wd);
 
  Complete:
-	complete_all(&dev->power.completion);
 	if (error)
 		async_error = error;
 
+	complete_all(&dev->power.completion);
 	TRACE_SUSPEND(error);
 	return error;
 }

drivers/base/power/opp/debugfs.c

@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/limits.h>
+#include <linux/slab.h>
 
 #include "opp.h"
 
@@ -34,6 +35,46 @@ void opp_debug_remove_one(struct dev_pm_opp *opp)
 	debugfs_remove_recursive(opp->dentry);
 }
 
+static bool opp_debug_create_supplies(struct dev_pm_opp *opp,
+				      struct opp_table *opp_table,
+				      struct dentry *pdentry)
+{
+	struct dentry *d;
+	int i = 0;
+	char *name;
+
+	/* Always create at least supply-0 directory */
+	do {
+		name = kasprintf(GFP_KERNEL, "supply-%d", i);
+
+		/* Create per-opp directory */
+		d = debugfs_create_dir(name, pdentry);
+
+		kfree(name);
+
+		if (!d)
+			return false;
+
+		if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d,
+					  &opp->supplies[i].u_volt))
+			return false;
+
+		if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d,
+					  &opp->supplies[i].u_volt_min))
+			return false;
+
+		if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d,
+					  &opp->supplies[i].u_volt_max))
+			return false;
+
+		if (!debugfs_create_ulong("u_amp", S_IRUGO, d,
+					  &opp->supplies[i].u_amp))
+			return false;
+	} while (++i < opp_table->regulator_count);
+
+	return true;
+}
+
 int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 {
 	struct dentry *pdentry = opp_table->dentry;
@@ -63,16 +104,7 @@ int opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 	if (!debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate))
 		return -ENOMEM;
 
-	if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d, &opp->u_volt))
-		return -ENOMEM;
-
-	if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d, &opp->u_volt_min))
-		return -ENOMEM;
-
-	if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d, &opp->u_volt_max))
-		return -ENOMEM;
-
-	if (!debugfs_create_ulong("u_amp", S_IRUGO, d, &opp->u_amp))
+	if (!opp_debug_create_supplies(opp, opp_table, d))
 		return -ENOMEM;
 
 	if (!debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,

drivers/base/power/opp/of.c

@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/device.h>
 #include <linux/of.h>
+#include <linux/slab.h>
 #include <linux/export.h>
 
 #include "opp.h"
@@ -101,16 +102,16 @@ static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
 	return true;
 }
 
-/* TODO: Support multiple regulators */
 static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 			      struct opp_table *opp_table)
 {
-	u32 microvolt[3] = {0};
-	u32 val;
-	int count, ret;
+	u32 *microvolt, *microamp = NULL;
+	int supplies, vcount, icount, ret, i, j;
 	struct property *prop = NULL;
 	char name[NAME_MAX];
 
+	supplies = opp_table->regulator_count ? opp_table->regulator_count : 1;
+
 	/* Search for "opp-microvolt-<name>" */
 	if (opp_table->prop_name) {
 		snprintf(name, sizeof(name), "opp-microvolt-%s",
@@ -128,34 +129,29 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 			return 0;
 	}
 
-	count = of_property_count_u32_elems(opp->np, name);
-	if (count < 0) {
+	vcount = of_property_count_u32_elems(opp->np, name);
+	if (vcount < 0) {
 		dev_err(dev, "%s: Invalid %s property (%d)\n",
-			__func__, name, count);
-		return count;
+			__func__, name, vcount);
+		return vcount;
 	}
 
-	/* There can be one or three elements here */
-	if (count != 1 && count != 3) {
-		dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
-			__func__, name, count);
+	/* There can be one or three elements per supply */
+	if (vcount != supplies && vcount != supplies * 3) {
+		dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
+			__func__, name, vcount, supplies);
 		return -EINVAL;
 	}
 
-	ret = of_property_read_u32_array(opp->np, name, microvolt, count);
+	microvolt = kmalloc_array(vcount, sizeof(*microvolt), GFP_KERNEL);
+	if (!microvolt)
+		return -ENOMEM;
+
+	ret = of_property_read_u32_array(opp->np, name, microvolt, vcount);
 	if (ret) {
 		dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
-		return -EINVAL;
-	}
-
-	opp->u_volt = microvolt[0];
-
-	if (count == 1) {
-		opp->u_volt_min = opp->u_volt;
-		opp->u_volt_max = opp->u_volt;
-	} else {
-		opp->u_volt_min = microvolt[1];
-		opp->u_volt_max = microvolt[2];
+		ret = -EINVAL;
+		goto free_microvolt;
 	}
 
 	/* Search for "opp-microamp-<name>" */
@@ -172,10 +168,59 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 		prop = of_find_property(opp->np, name, NULL);
 	}
 
-	if (prop && !of_property_read_u32(opp->np, name, &val))
-		opp->u_amp = val;
+	if (prop) {
+		icount = of_property_count_u32_elems(opp->np, name);
+		if (icount < 0) {
+			dev_err(dev, "%s: Invalid %s property (%d)\n", __func__,
+				name, icount);
+			ret = icount;
+			goto free_microvolt;
+		}
 
-	return 0;
+		if (icount != supplies) {
+			dev_err(dev, "%s: Invalid number of elements in %s property (%d) with supplies (%d)\n",
+				__func__, name, icount, supplies);
+			ret = -EINVAL;
+			goto free_microvolt;
+		}
+
+		microamp = kmalloc_array(icount, sizeof(*microamp), GFP_KERNEL);
+		if (!microamp) {
+			ret = -EINVAL;
+			goto free_microvolt;
+		}
+
+		ret = of_property_read_u32_array(opp->np, name, microamp,
+						 icount);
+		if (ret) {
+			dev_err(dev, "%s: error parsing %s: %d\n", __func__,
+				name, ret);
+			ret = -EINVAL;
+			goto free_microamp;
+		}
+	}
+
+	for (i = 0, j = 0; i < supplies; i++) {
+		opp->supplies[i].u_volt = microvolt[j++];
+
+		if (vcount == supplies) {
+			opp->supplies[i].u_volt_min = opp->supplies[i].u_volt;
+			opp->supplies[i].u_volt_max = opp->supplies[i].u_volt;
+		} else {
+			opp->supplies[i].u_volt_min = microvolt[j++];
+			opp->supplies[i].u_volt_max = microvolt[j++];
+		}
+
+		if (microamp)
+			opp->supplies[i].u_amp = microamp[i];
+	}
+
+free_microamp:
+	kfree(microamp);
+free_microvolt:
+	kfree(microvolt);
+
+	return ret;
 }
 
 /**
@@ -198,7 +243,7 @@ void dev_pm_opp_of_remove_table(struct device *dev)
 EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
 
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
-struct device_node *_of_get_opp_desc_node(struct device *dev)
+static struct device_node *_of_get_opp_desc_node(struct device *dev)
 {
 	/*
 	 * TODO: Support for multiple OPP tables.
@@ -303,9 +348,9 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
 	mutex_unlock(&opp_table_lock);
 
 	pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
-		 __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
-		 new_opp->u_volt_min, new_opp->u_volt_max,
-		 new_opp->clock_latency_ns);
+		 __func__, new_opp->turbo, new_opp->rate,
+		 new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min,
+		 new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns);
 
 	/*
 	 * Notify the changes in the availability of the operable
@@ -562,7 +607,7 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
 	/* Get OPP descriptor node */
 	np = _of_get_opp_desc_node(cpu_dev);
 	if (!np) {
-		dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
+		dev_dbg(cpu_dev, "%s: Couldn't find opp node.\n", __func__);
 		return -ENOENT;
 	}
 
@@ -587,7 +632,7 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
 		/* Get OPP descriptor node */
 		tmp_np = _of_get_opp_desc_node(tcpu_dev);
 		if (!tmp_np) {
-			dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
+			dev_err(tcpu_dev, "%s: Couldn't find opp node.\n",
 				__func__);
 			ret = -ENOENT;
 			goto put_cpu_node;

drivers/base/power/opp/opp.h

@@ -61,10 +61,7 @@ extern struct list_head opp_tables;
  * @turbo:	true if turbo (boost) OPP
  * @suspend:	true if suspend OPP
  * @rate:	Frequency in hertz
- * @u_volt:	Target voltage in microvolts corresponding to this OPP
- * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
- * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
- * @u_amp:	Maximum current drawn by the device in microamperes
+ * @supplies:	Power supplies voltage/current values
  * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
  *		frequency from any other OPP's frequency.
  * @opp_table:	points back to the opp_table struct this opp belongs to
@@ -83,10 +80,8 @@ struct dev_pm_opp {
 	bool suspend;
 	unsigned long rate;
 
-	unsigned long u_volt;
-	unsigned long u_volt_min;
-	unsigned long u_volt_max;
-	unsigned long u_amp;
+	struct dev_pm_opp_supply *supplies;
+
 	unsigned long clock_latency_ns;
 
 	struct opp_table *opp_table;
@@ -144,7 +139,10 @@ enum opp_table_access {
  * @supported_hw_count: Number of elements in supported_hw array.
  * @prop_name: A name to postfix to many DT properties, while parsing them.
  * @clk: Device's clock handle
- * @regulator: Supply regulator
+ * @regulators: Supply regulators
+ * @regulator_count: Number of power supply regulators
+ * @set_opp: Platform specific set_opp callback
+ * @set_opp_data: Data to be passed to set_opp callback
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
@@ -179,7 +177,11 @@ struct opp_table {
 	unsigned int supported_hw_count;
 	const char *prop_name;
 	struct clk *clk;
-	struct regulator *regulator;
+	struct regulator **regulators;
+	unsigned int regulator_count;
+
+	int (*set_opp)(struct dev_pm_set_opp_data *data);
+	struct dev_pm_set_opp_data *set_opp_data;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
@@ -190,7 +192,6 @@ struct opp_table {
 /* Routines internal to opp core */
 struct opp_table *_find_opp_table(struct device *dev);
 struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table);
-struct device_node *_of_get_opp_desc_node(struct device *dev);
 void _dev_pm_opp_remove_table(struct device *dev, bool remove_all);
 struct dev_pm_opp *_allocate_opp(struct device *dev, struct opp_table **opp_table);
 int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);

drivers/base/power/power.h

@@ -21,14 +21,22 @@ extern void pm_runtime_init(struct device *dev);
 extern void pm_runtime_reinit(struct device *dev);
 extern void pm_runtime_remove(struct device *dev);
 
+#define WAKE_IRQ_DEDICATED_ALLOCATED	BIT(0)
+#define WAKE_IRQ_DEDICATED_MANAGED	BIT(1)
+#define WAKE_IRQ_DEDICATED_MASK		(WAKE_IRQ_DEDICATED_ALLOCATED | \
+					 WAKE_IRQ_DEDICATED_MANAGED)
+
 struct wake_irq {
 	struct device *dev;
+	unsigned int status;
 	int irq;
-	bool dedicated_irq:1;
 };
 
 extern void dev_pm_arm_wake_irq(struct wake_irq *wirq);
 extern void dev_pm_disarm_wake_irq(struct wake_irq *wirq);
+extern void dev_pm_enable_wake_irq_check(struct device *dev,
+					 bool can_change_status);
+extern void dev_pm_disable_wake_irq_check(struct device *dev);
 
 #ifdef CONFIG_PM_SLEEP
 
@@ -104,6 +112,15 @@ static inline void dev_pm_disarm_wake_irq(struct wake_irq *wirq)
 {
 }
 
+static inline void dev_pm_enable_wake_irq_check(struct device *dev,
+						bool can_change_status)
+{
+}
+
+static inline void dev_pm_disable_wake_irq_check(struct device *dev)
+{
+}
+
 #endif
 
 #ifdef CONFIG_PM_SLEEP

drivers/base/power/qos.c

@@ -856,6 +856,9 @@ int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val)
 		struct dev_pm_qos_request *req;
 
 		if (val < 0) {
+			if (val == PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT)
+				ret = 0;
+			else
 				ret = -EINVAL;
 			goto out;
 		}
@@ -883,6 +886,7 @@ int dev_pm_qos_update_user_latency_tolerance(struct device *dev, s32 val)
 	mutex_unlock(&dev_pm_qos_mtx);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(dev_pm_qos_update_user_latency_tolerance);
 
 /**
  * dev_pm_qos_expose_latency_tolerance - Expose latency tolerance to userspace

drivers/base/power/runtime.c

@@ -241,7 +241,8 @@ static int rpm_check_suspend_allowed(struct device *dev)
 		retval = -EACCES;
 	else if (atomic_read(&dev->power.usage_count) > 0)
 		retval = -EAGAIN;
-	else if (!pm_children_suspended(dev))
+	else if (!dev->power.ignore_children &&
+			atomic_read(&dev->power.child_count))
 		retval = -EBUSY;
 
 	/* Pending resume requests take precedence over suspends. */
@@ -515,7 +516,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 
 	callback = RPM_GET_CALLBACK(dev, runtime_suspend);
 
-	dev_pm_enable_wake_irq(dev);
+	dev_pm_enable_wake_irq_check(dev, true);
 	retval = rpm_callback(callback, dev);
 	if (retval)
 		goto fail;
@@ -554,7 +555,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 	return retval;
 
  fail:
-	dev_pm_disable_wake_irq(dev);
+	dev_pm_disable_wake_irq_check(dev);
 	__update_runtime_status(dev, RPM_ACTIVE);
 	dev->power.deferred_resume = false;
 	wake_up_all(&dev->power.wait_queue);
@@ -712,8 +713,8 @@ static int rpm_resume(struct device *dev, int rpmflags)
 
 		spin_lock(&parent->power.lock);
 		/*
-		 * We can resume if the parent's runtime PM is disabled or it
-		 * is set to ignore children.
+		 * Resume the parent if it has runtime PM enabled and not been
+		 * set to ignore its children.
 		 */
 		if (!parent->power.disable_depth
 		    && !parent->power.ignore_children) {
@@ -737,12 +738,12 @@ static int rpm_resume(struct device *dev, int rpmflags)
 
 	callback = RPM_GET_CALLBACK(dev, runtime_resume);
 
-	dev_pm_disable_wake_irq(dev);
+	dev_pm_disable_wake_irq_check(dev);
 	retval = rpm_callback(callback, dev);
 	if (retval) {
 		__update_runtime_status(dev, RPM_SUSPENDED);
 		pm_runtime_cancel_pending(dev);
-		dev_pm_enable_wake_irq(dev);
+		dev_pm_enable_wake_irq_check(dev, false);
 	} else {
  no_callback:
 		__update_runtime_status(dev, RPM_ACTIVE);
@@ -1027,7 +1028,17 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status)
 		goto out_set;
 
 	if (status == RPM_SUSPENDED) {
-		/* It always is possible to set the status to 'suspended'. */
+		/*
+		 * It is invalid to suspend a device with an active child,
+		 * unless it has been set to ignore its children.
+		 */
+		if (!dev->power.ignore_children &&
+			atomic_read(&dev->power.child_count)) {
+			dev_err(dev, "runtime PM trying to suspend device but active child\n");
+			error = -EBUSY;
+			goto out;
+		}
+
 		if (parent) {
 			atomic_add_unless(&parent->power.child_count, -1, 0);
 			notify_parent = !parent->power.ignore_children;
@@ -1478,6 +1489,16 @@ int pm_runtime_force_suspend(struct device *dev)
 	if (ret)
 		goto err;
 
+	/*
+	 * Increase the runtime PM usage count for the device's parent, in case
+	 * when we find the device being used when system suspend was invoked.
+	 * This informs pm_runtime_force_resume() to resume the parent
+	 * immediately, which is needed to be able to resume its children,
+	 * when not deferring the resume to be managed via runtime PM.
+	 */
+	if (dev->parent && atomic_read(&dev->power.usage_count) > 1)
+		pm_runtime_get_noresume(dev->parent);
+
 	pm_runtime_set_suspended(dev);
 	return 0;
 err:
@@ -1487,16 +1508,20 @@ int pm_runtime_force_suspend(struct device *dev)
 EXPORT_SYMBOL_GPL(pm_runtime_force_suspend);
 
 /**
- * pm_runtime_force_resume - Force a device into resume state.
+ * pm_runtime_force_resume - Force a device into resume state if needed.
  * @dev: Device to resume.
  *
  * Prior invoking this function we expect the user to have brought the device
  * into low power state by a call to pm_runtime_force_suspend(). Here we reverse
- * those actions and brings the device into full power. We update the runtime PM
- * status and re-enables runtime PM.
+ * those actions and brings the device into full power, if it is expected to be
+ * used on system resume. To distinguish that, we check whether the runtime PM
+ * usage count is greater than 1 (the PM core increases the usage count in the
+ * system PM prepare phase), as that indicates a real user (such as a subsystem,
+ * driver, userspace, etc.) is using it. If that is the case, the device is
+ * expected to be used on system resume as well, so then we resume it. In the
+ * other case, we defer the resume to be managed via runtime PM.
  *
- * Typically this function may be invoked from a system resume callback to make
- * sure the device is put into full power state.
+ * Typically this function may be invoked from a system resume callback.
  */
 int pm_runtime_force_resume(struct device *dev)
 {
@@ -1513,6 +1538,17 @@ int pm_runtime_force_resume(struct device *dev)
 	if (!pm_runtime_status_suspended(dev))
 		goto out;
 
+	/*
+	 * Decrease the parent's runtime PM usage count, if we increased it
+	 * during system suspend in pm_runtime_force_suspend().
+	*/
+	if (atomic_read(&dev->power.usage_count) > 1) {
+		if (dev->parent)
+			pm_runtime_put_noidle(dev->parent);
+	} else {
+		goto out;
+	}
+
 	ret = pm_runtime_set_active(dev);
 	if (ret)
 		goto out;

drivers/base/power/sysfs.c

@@ -263,7 +263,11 @@ static ssize_t pm_qos_latency_tolerance_store(struct device *dev,
 	s32 value;
 	int ret;
 
-	if (kstrtos32(buf, 0, &value)) {
+	if (kstrtos32(buf, 0, &value) == 0) {
+		/* Users can't write negative values directly */
+		if (value < 0)
+			return -EINVAL;
+	} else {
 		if (!strcmp(buf, "auto") || !strcmp(buf, "auto\n"))
 			value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT;
 		else if (!strcmp(buf, "any") || !strcmp(buf, "any\n"))

drivers/base/power/wakeirq.c

@@ -110,8 +110,10 @@ void dev_pm_clear_wake_irq(struct device *dev)
 	dev->power.wakeirq = NULL;
 	spin_unlock_irqrestore(&dev->power.lock, flags);
 
-	if (wirq->dedicated_irq)
+	if (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED) {
 		free_irq(wirq->irq, wirq);
+		wirq->status &= ~WAKE_IRQ_DEDICATED_MASK;
+	}
 	kfree(wirq);
 }
 EXPORT_SYMBOL_GPL(dev_pm_clear_wake_irq);
@@ -179,7 +181,6 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
 
 	wirq->dev = dev;
 	wirq->irq = irq;
-	wirq->dedicated_irq = true;
 	irq_set_status_flags(irq, IRQ_NOAUTOEN);
 
 	/*
@@ -195,6 +196,8 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
 	if (err)
 		goto err_free_irq;
 
+	wirq->status = WAKE_IRQ_DEDICATED_ALLOCATED;
+
 	return err;
 
 err_free_irq:
@@ -210,9 +213,9 @@ EXPORT_SYMBOL_GPL(dev_pm_set_dedicated_wake_irq);
  * dev_pm_enable_wake_irq - Enable device wake-up interrupt
  * @dev: Device
  *
- * Called from the bus code or the device driver for
- * runtime_suspend() to enable the wake-up interrupt while
- * the device is running.
+ * Optionally called from the bus code or the device driver for
+ * runtime_resume() to override the PM runtime core managed wake-up
+ * interrupt handling to enable the wake-up interrupt.
  *
  * Note that for runtime_suspend()) the wake-up interrupts
  * should be unconditionally enabled unlike for suspend()
@@ -222,7 +225,7 @@ void dev_pm_enable_wake_irq(struct device *dev)
 {
 	struct wake_irq *wirq = dev->power.wakeirq;
 
-	if (wirq && wirq->dedicated_irq)
+	if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED))
 		enable_irq(wirq->irq);
 }
 EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq);
@@ -231,19 +234,72 @@ EXPORT_SYMBOL_GPL(dev_pm_enable_wake_irq);
  * dev_pm_disable_wake_irq - Disable device wake-up interrupt
  * @dev: Device
  *
- * Called from the bus code or the device driver for
- * runtime_resume() to disable the wake-up interrupt while
- * the device is running.
+ * Optionally called from the bus code or the device driver for
+ * runtime_suspend() to override the PM runtime core managed wake-up
+ * interrupt handling to disable the wake-up interrupt.
  */
 void dev_pm_disable_wake_irq(struct device *dev)
 {
 	struct wake_irq *wirq = dev->power.wakeirq;
 
-	if (wirq && wirq->dedicated_irq)
+	if (wirq && (wirq->status & WAKE_IRQ_DEDICATED_ALLOCATED))
 		disable_irq_nosync(wirq->irq);
 }
 EXPORT_SYMBOL_GPL(dev_pm_disable_wake_irq);
 
+/**
+ * dev_pm_enable_wake_irq_check - Checks and enables wake-up interrupt
+ * @dev: Device
+ * @can_change_status: Can change wake-up interrupt status
+ *
+ * Enables wakeirq conditionally. We need to enable wake-up interrupt
+ * lazily on the first rpm_suspend(). This is needed as the consumer device
+ * starts in RPM_SUSPENDED state, and the the first pm_runtime_get() would
+ * otherwise try to disable already disabled wakeirq. The wake-up interrupt
+ * starts disabled with IRQ_NOAUTOEN set.
+ *
+ * Should be only called from rpm_suspend() and rpm_resume() path.
+ * Caller must hold &dev->power.lock to change wirq->status
+ */
+void dev_pm_enable_wake_irq_check(struct device *dev,
+				  bool can_change_status)
+{
+	struct wake_irq *wirq = dev->power.wakeirq;
+
+	if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
+		return;
+
+	if (likely(wirq->status & WAKE_IRQ_DEDICATED_MANAGED)) {
+		goto enable;
+	} else if (can_change_status) {
+		wirq->status |= WAKE_IRQ_DEDICATED_MANAGED;
+		goto enable;
+	}
+
+	return;
+
+enable:
+	enable_irq(wirq->irq);
+}
+
+/**
+ * dev_pm_disable_wake_irq_check - Checks and disables wake-up interrupt
+ * @dev: Device
+ *
+ * Disables wake-up interrupt conditionally based on status.
+ * Should be only called from rpm_suspend() and rpm_resume() path.
+ */
+void dev_pm_disable_wake_irq_check(struct device *dev)
+{
+	struct wake_irq *wirq = dev->power.wakeirq;
+
+	if (!wirq || !((wirq->status & WAKE_IRQ_DEDICATED_MASK)))
+		return;
+
+	if (wirq->status & WAKE_IRQ_DEDICATED_MANAGED)
+		disable_irq_nosync(wirq->irq);
+}
+
 /**
  * dev_pm_arm_wake_irq - Arm device wake-up
  * @wirq: Device wake-up interrupt

drivers/base/power/wakeup.c

@@ -811,7 +811,7 @@ void pm_print_active_wakeup_sources(void)
 	rcu_read_lock();
 	list_for_each_entry_rcu(ws, &wakeup_sources, entry) {
 		if (ws->active) {
-			pr_info("active wakeup source: %s\n", ws->name);
+			pr_debug("active wakeup source: %s\n", ws->name);
 			active = 1;
 		} else if (!active &&
 			   (!last_activity_ws ||
@@ -822,7 +822,7 @@ void pm_print_active_wakeup_sources(void)
 	}
 
 	if (!active && last_activity_ws)
-		pr_info("last active wakeup source: %s\n",
+		pr_debug("last active wakeup source: %s\n",
 			last_activity_ws->name);
 	rcu_read_unlock();
 }
@@ -905,7 +905,7 @@ bool pm_get_wakeup_count(unsigned int *count, bool block)
 			split_counters(&cnt, &inpr);
 			if (inpr == 0 || signal_pending(current))
 				break;
-
+			pm_print_active_wakeup_sources();
 			schedule();
 		}
 		finish_wait(&wakeup_count_wait_queue, &wait);

drivers/cpufreq/Kconfig.arm

@@ -12,6 +12,27 @@ config ARM_BIG_LITTLE_CPUFREQ
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
 
+config ARM_BRCMSTB_AVS_CPUFREQ
+	tristate "Broadcom STB AVS CPUfreq driver"
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	default y
+	help
+	  Some Broadcom STB SoCs use a co-processor running proprietary firmware
+	  ("AVS") to handle voltage and frequency scaling. This driver provides
+	  a standard CPUfreq interface to to the firmware.
+
+	  Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
+
+config ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
+	bool "Broadcom STB AVS CPUfreq driver sysfs debug capability"
+	depends on ARM_BRCMSTB_AVS_CPUFREQ
+	help
+	  Enabling this option turns on debug support via sysfs under
+	  /sys/kernel/debug/brcmstb-avs-cpufreq. It is possible to read all and
+	  write some AVS mailbox registers through sysfs entries.
+
+	  If in doubt, say N.
+
 config ARM_DT_BL_CPUFREQ
 	tristate "Generic probing via DT for ARM big LITTLE CPUfreq driver"
 	depends on ARM_BIG_LITTLE_CPUFREQ && OF
@@ -60,14 +81,6 @@ config ARM_IMX6Q_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_INTEGRATOR
-	tristate "CPUfreq driver for ARM Integrator CPUs"
-	depends on ARCH_INTEGRATOR
-	default y
-	help
-	  This enables the CPUfreq driver for ARM Integrator CPUs.
-	  If in doubt, say Y.
-
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool MACH_KIRKWOOD
 	help

drivers/cpufreq/Makefile

@@ -51,12 +51,12 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ)	+= arm_big_little.o
 # LITTLE drivers, so that it is probed last.
 obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
+obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
 obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
-obj-$(CONFIG_ARM_INTEGRATOR)		+= integrator-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o

drivers/cpufreq/acpi-cpufreq.c

@@ -84,7 +84,6 @@ static inline struct acpi_processor_performance *to_perf_data(struct acpi_cpufre
 static struct cpufreq_driver acpi_cpufreq_driver;
 
 static unsigned int acpi_pstate_strict;
-static struct msr __percpu *msrs;
 
 static bool boost_state(unsigned int cpu)
 {
@@ -104,11 +103,10 @@ static bool boost_state(unsigned int cpu)
 	return false;
 }
 
-static void boost_set_msrs(bool enable, const struct cpumask *cpumask)
+static int boost_set_msr(bool enable)
 {
-	u32 cpu;
 	u32 msr_addr;
-	u64 msr_mask;
+	u64 msr_mask, val;
 
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_INTEL:
@@ -120,26 +118,31 @@ static void boost_set_msrs(bool enable, const struct cpumask *cpumask)
 		msr_mask = MSR_K7_HWCR_CPB_DIS;
 		break;
 	default:
-		return;
+		return -EINVAL;
 	}
 
-	rdmsr_on_cpus(cpumask, msr_addr, msrs);
+	rdmsrl(msr_addr, val);
 
-	for_each_cpu(cpu, cpumask) {
-		struct msr *reg = per_cpu_ptr(msrs, cpu);
 	if (enable)
-			reg->q &= ~msr_mask;
+		val &= ~msr_mask;
 	else
-			reg->q |= msr_mask;
-	}
+		val |= msr_mask;
 
-	wrmsr_on_cpus(cpumask, msr_addr, msrs);
+	wrmsrl(msr_addr, val);
+	return 0;
+}
+
+static void boost_set_msr_each(void *p_en)
+{
+	bool enable = (bool) p_en;
+
+	boost_set_msr(enable);
 }
 
 static int set_boost(int val)
 {
 	get_online_cpus();
-	boost_set_msrs(val, cpu_online_mask);
+	on_each_cpu(boost_set_msr_each, (void *)(long)val, 1);
 	put_online_cpus();
 	pr_debug("Core Boosting %sabled.\n", val ? "en" : "dis");
 
@@ -536,46 +539,24 @@ static void free_acpi_perf_data(void)
 	free_percpu(acpi_perf_data);
 }
 
-static int boost_notify(struct notifier_block *nb, unsigned long action,
-		      void *hcpu)
+static int cpufreq_boost_online(unsigned int cpu)
 {
-	unsigned cpu = (long)hcpu;
-	const struct cpumask *cpumask;
-
-	cpumask = get_cpu_mask(cpu);
+	/*
+	 * On the CPU_UP path we simply keep the boost-disable flag
+	 * in sync with the current global state.
+	 */
+	return boost_set_msr(acpi_cpufreq_driver.boost_enabled);
+}
 
+static int cpufreq_boost_down_prep(unsigned int cpu)
+{
 	/*
 	 * Clear the boost-disable bit on the CPU_DOWN path so that
-	 * this cpu cannot block the remaining ones from boosting. On
-	 * the CPU_UP path we simply keep the boost-disable flag in
-	 * sync with the current global state.
+	 * this cpu cannot block the remaining ones from boosting.
 	 */
-
-	switch (action) {
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		boost_set_msrs(acpi_cpufreq_driver.boost_enabled, cpumask);
-		break;
-
-	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
-		boost_set_msrs(1, cpumask);
-		break;
-
-	default:
-		break;
-	}
-
-	return NOTIFY_OK;
+	return boost_set_msr(1);
 }
 
-
-static struct notifier_block boost_nb = {
-	.notifier_call          = boost_notify,
-};
-
 /*
  * acpi_cpufreq_early_init - initialize ACPI P-States library
  *
@@ -922,37 +903,35 @@ static struct cpufreq_driver acpi_cpufreq_driver = {
 	.attr		= acpi_cpufreq_attr,
 };
 
+static enum cpuhp_state acpi_cpufreq_online;
+
 static void __init acpi_cpufreq_boost_init(void)
 {
-	if (boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA)) {
-		msrs = msrs_alloc();
+	int ret;
 
-		if (!msrs)
+	if (!(boot_cpu_has(X86_FEATURE_CPB) || boot_cpu_has(X86_FEATURE_IDA)))
 		return;
 
 	acpi_cpufreq_driver.set_boost = set_boost;
 	acpi_cpufreq_driver.boost_enabled = boost_state(0);
 
-		cpu_notifier_register_begin();
-
-		/* Force all MSRs to the same value */
-		boost_set_msrs(acpi_cpufreq_driver.boost_enabled,
-			       cpu_online_mask);
-
-		__register_cpu_notifier(&boost_nb);
-
-		cpu_notifier_register_done();
+	/*
+	 * This calls the online callback on all online cpu and forces all
+	 * MSRs to the same value.
+	 */
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "cpufreq/acpi:online",
+				cpufreq_boost_online, cpufreq_boost_down_prep);
+	if (ret < 0) {
+		pr_err("acpi_cpufreq: failed to register hotplug callbacks\n");
+		return;
 	}
+	acpi_cpufreq_online = ret;
 }
 
 static void acpi_cpufreq_boost_exit(void)
 {
-	if (msrs) {
-		unregister_cpu_notifier(&boost_nb);
-
-		msrs_free(msrs);
-		msrs = NULL;
-	}
+	if (acpi_cpufreq_online >= 0)
+		cpuhp_remove_state_nocalls(acpi_cpufreq_online);
 }
 
 static int __init acpi_cpufreq_init(void)

drivers/cpufreq/cppc_cpufreq.c

@@ -247,3 +247,10 @@ MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec");
 MODULE_LICENSE("GPL");
 
 late_initcall(cppc_cpufreq_init);
+
+static const struct acpi_device_id cppc_acpi_ids[] = {
+	{ACPI_PROCESSOR_DEVICE_HID, },
+	{}
+};
+
+MODULE_DEVICE_TABLE(acpi, cppc_acpi_ids);

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -26,6 +26,9 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "allwinner,sun8i-a83t", },
 	{ .compatible = "allwinner,sun8i-h3", },
 
+	{ .compatible = "arm,integrator-ap", },
+	{ .compatible = "arm,integrator-cp", },
+
 	{ .compatible = "hisilicon,hi6220", },
 
 	{ .compatible = "fsl,imx27", },
@@ -34,6 +37,8 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "fsl,imx7d", },
 
 	{ .compatible = "marvell,berlin", },
+	{ .compatible = "marvell,pxa250", },
+	{ .compatible = "marvell,pxa270", },
 
 	{ .compatible = "samsung,exynos3250", },
 	{ .compatible = "samsung,exynos4210", },
@@ -50,6 +55,8 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "renesas,r7s72100", },
 	{ .compatible = "renesas,r8a73a4", },
 	{ .compatible = "renesas,r8a7740", },
+	{ .compatible = "renesas,r8a7743", },
+	{ .compatible = "renesas,r8a7745", },
 	{ .compatible = "renesas,r8a7778", },
 	{ .compatible = "renesas,r8a7779", },
 	{ .compatible = "renesas,r8a7790", },
@@ -72,6 +79,12 @@ static const struct of_device_id machines[] __initconst = {
 
 	{ .compatible = "sigma,tango4" },
 
+	{ .compatible = "socionext,uniphier-pro5", },
+	{ .compatible = "socionext,uniphier-pxs2", },
+	{ .compatible = "socionext,uniphier-ld6b", },
+	{ .compatible = "socionext,uniphier-ld11", },
+	{ .compatible = "socionext,uniphier-ld20", },
+
 	{ .compatible = "ti,am33xx", },
 	{ .compatible = "ti,dra7", },
 	{ .compatible = "ti,omap2", },
@@ -81,6 +94,8 @@ static const struct of_device_id machines[] __initconst = {
 
 	{ .compatible = "xlnx,zynq-7000", },
 
+	{ .compatible = "zte,zx296718", },
+
 	{ }
 };
 

drivers/cpufreq/cpufreq-dt.c

@@ -28,6 +28,7 @@
 #include "cpufreq-dt.h"
 
 struct private_data {
+	struct opp_table *opp_table;
 	struct device *cpu_dev;
 	struct thermal_cooling_device *cdev;
 	const char *reg_name;
@@ -143,6 +144,7 @@ static int resources_available(void)
 static int cpufreq_init(struct cpufreq_policy *policy)
 {
 	struct cpufreq_frequency_table *freq_table;
+	struct opp_table *opp_table = NULL;
 	struct private_data *priv;
 	struct device *cpu_dev;
 	struct clk *cpu_clk;
@@ -186,8 +188,9 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 */
 	name = find_supply_name(cpu_dev);
 	if (name) {
-		ret = dev_pm_opp_set_regulator(cpu_dev, name);
-		if (ret) {
+		opp_table = dev_pm_opp_set_regulators(cpu_dev, &name, 1);
+		if (IS_ERR(opp_table)) {
+			ret = PTR_ERR(opp_table);
 			dev_err(cpu_dev, "Failed to set regulator for cpu%d: %d\n",
 				policy->cpu, ret);
 			goto out_put_clk;
@@ -237,6 +240,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	priv->reg_name = name;
+	priv->opp_table = opp_table;
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
@@ -285,7 +289,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 out_free_opp:
 	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
 	if (name)
-		dev_pm_opp_put_regulator(cpu_dev);
+		dev_pm_opp_put_regulators(opp_table);
 out_put_clk:
 	clk_put(cpu_clk);
 
@@ -300,7 +304,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
 	if (priv->reg_name)
-		dev_pm_opp_put_regulator(priv->cpu_dev);
+		dev_pm_opp_put_regulators(priv->opp_table);
 
 	clk_put(policy->clk);
 	kfree(priv);

drivers/cpufreq/cpufreq.c

@@ -1526,7 +1526,10 @@ unsigned int cpufreq_get(unsigned int cpu)
 
 	if (policy) {
 		down_read(&policy->rwsem);
+
+		if (!policy_is_inactive(policy))
 			ret_freq = __cpufreq_get(policy);
+
 		up_read(&policy->rwsem);
 
 		cpufreq_cpu_put(policy);
@@ -2254,17 +2257,19 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
  *	Useful for policy notifiers which have different necessities
  *	at different times.
  */
-int cpufreq_update_policy(unsigned int cpu)
+void cpufreq_update_policy(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
 	struct cpufreq_policy new_policy;
-	int ret;
 
 	if (!policy)
-		return -ENODEV;
+		return;
 
 	down_write(&policy->rwsem);
 
+	if (policy_is_inactive(policy))
+		goto unlock;
+
 	pr_debug("updating policy for CPU %u\n", cpu);
 	memcpy(&new_policy, policy, sizeof(*policy));
 	new_policy.min = policy->user_policy.min;
@@ -2275,24 +2280,20 @@ int cpufreq_update_policy(unsigned int cpu)
 	 * -> ask driver for current freq and notify governors about a change
 	 */
 	if (cpufreq_driver->get && !cpufreq_driver->setpolicy) {
-		if (cpufreq_suspended) {
-			ret = -EAGAIN;
+		if (cpufreq_suspended)
 			goto unlock;
-		}
+
 		new_policy.cur = cpufreq_update_current_freq(policy);
-		if (WARN_ON(!new_policy.cur)) {
-			ret = -EIO;
+		if (WARN_ON(!new_policy.cur))
 			goto unlock;
 	}
-	}
 
-	ret = cpufreq_set_policy(policy, &new_policy);
+	cpufreq_set_policy(policy, &new_policy);
 
 unlock:
 	up_write(&policy->rwsem);
 
 	cpufreq_cpu_put(policy);
-	return ret;
 }
 EXPORT_SYMBOL(cpufreq_update_policy);
 

drivers/cpufreq/cpufreq_conservative.c

@@ -37,16 +37,16 @@ struct cs_dbs_tuners {
 #define DEF_SAMPLING_DOWN_FACTOR		(1)
 #define MAX_SAMPLING_DOWN_FACTOR		(10)
 
-static inline unsigned int get_freq_target(struct cs_dbs_tuners *cs_tuners,
+static inline unsigned int get_freq_step(struct cs_dbs_tuners *cs_tuners,
 					 struct cpufreq_policy *policy)
 {
-	unsigned int freq_target = (cs_tuners->freq_step * policy->max) / 100;
+	unsigned int freq_step = (cs_tuners->freq_step * policy->max) / 100;
 
 	/* max freq cannot be less than 100. But who knows... */
-	if (unlikely(freq_target == 0))
-		freq_target = DEF_FREQUENCY_STEP;
+	if (unlikely(freq_step == 0))
+		freq_step = DEF_FREQUENCY_STEP;
 
-	return freq_target;
+	return freq_step;
 }
 
 /*
@@ -55,10 +55,10 @@ static inline unsigned int get_freq_target(struct cs_dbs_tuners *cs_tuners,
  * sampling_down_factor, we check, if current idle time is more than 80%
  * (default), then we try to decrease frequency
  *
- * Any frequency increase takes it to the maximum frequency. Frequency reduction
- * happens at minimum steps of 5% (default) of maximum frequency
+ * Frequency updates happen at minimum steps of 5% (default) of maximum
+ * frequency
  */
-static unsigned int cs_dbs_timer(struct cpufreq_policy *policy)
+static unsigned int cs_dbs_update(struct cpufreq_policy *policy)
 {
 	struct policy_dbs_info *policy_dbs = policy->governor_data;
 	struct cs_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs);
@@ -66,6 +66,7 @@ static unsigned int cs_dbs_timer(struct cpufreq_policy *policy)
 	struct dbs_data *dbs_data = policy_dbs->dbs_data;
 	struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
 	unsigned int load = dbs_update(policy);
+	unsigned int freq_step;
 
 	/*
 	 * break out if we 'cannot' reduce the speed as the user might
@@ -82,6 +83,23 @@ static unsigned int cs_dbs_timer(struct cpufreq_policy *policy)
 	if (requested_freq > policy->max || requested_freq < policy->min)
 		requested_freq = policy->cur;
 
+	freq_step = get_freq_step(cs_tuners, policy);
+
+	/*
+	 * Decrease requested_freq one freq_step for each idle period that
+	 * we didn't update the frequency.
+	 */
+	if (policy_dbs->idle_periods < UINT_MAX) {
+		unsigned int freq_steps = policy_dbs->idle_periods * freq_step;
+
+		if (requested_freq > freq_steps)
+			requested_freq -= freq_steps;
+		else
+			requested_freq = policy->min;
+
+		policy_dbs->idle_periods = UINT_MAX;
+	}
+
 	/* Check for frequency increase */
 	if (load > dbs_data->up_threshold) {
 		dbs_info->down_skip = 0;
@@ -90,7 +108,7 @@ static unsigned int cs_dbs_timer(struct cpufreq_policy *policy)
 		if (requested_freq == policy->max)
 			goto out;
 
-		requested_freq += get_freq_target(cs_tuners, policy);
+		requested_freq += freq_step;
 		if (requested_freq > policy->max)
 			requested_freq = policy->max;
 
@@ -106,16 +124,14 @@ static unsigned int cs_dbs_timer(struct cpufreq_policy *policy)
 
 	/* Check for frequency decrease */
 	if (load < cs_tuners->down_threshold) {
-		unsigned int freq_target;
 		/*
 		 * if we cannot reduce the frequency anymore, break out early
 		 */
 		if (requested_freq == policy->min)
 			goto out;
 
-		freq_target = get_freq_target(cs_tuners, policy);
-		if (requested_freq > freq_target)
-			requested_freq -= freq_target;
+		if (requested_freq > freq_step)
+			requested_freq -= freq_step;
 		else
 			requested_freq = policy->min;
 
@@ -305,7 +321,7 @@ static void cs_start(struct cpufreq_policy *policy)
 static struct dbs_governor cs_governor = {
 	.gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("conservative"),
 	.kobj_type = { .default_attrs = cs_attributes },
-	.gov_dbs_timer = cs_dbs_timer,
+	.gov_dbs_update = cs_dbs_update,
 	.alloc = cs_alloc,
 	.free = cs_free,
 	.init = cs_init,

drivers/cpufreq/cpufreq_governor.c

@@ -61,7 +61,7 @@ ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
 	 * entries can't be freed concurrently.
 	 */
 	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
-		mutex_lock(&policy_dbs->timer_mutex);
+		mutex_lock(&policy_dbs->update_mutex);
 		/*
 		 * On 32-bit architectures this may race with the
 		 * sample_delay_ns read in dbs_update_util_handler(), but that
@@ -76,7 +76,7 @@ ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
 		 * taken, so it shouldn't be significant.
 		 */
 		gov_update_sample_delay(policy_dbs, 0);
-		mutex_unlock(&policy_dbs->timer_mutex);
+		mutex_unlock(&policy_dbs->update_mutex);
 	}
 
 	return count;
@@ -117,7 +117,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
 	struct policy_dbs_info *policy_dbs = policy->governor_data;
 	struct dbs_data *dbs_data = policy_dbs->dbs_data;
 	unsigned int ignore_nice = dbs_data->ignore_nice_load;
-	unsigned int max_load = 0;
+	unsigned int max_load = 0, idle_periods = UINT_MAX;
 	unsigned int sampling_rate, io_busy, j;
 
 	/*
@@ -215,9 +215,19 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
 			j_cdbs->prev_load = load;
 		}
 
+		if (time_elapsed > 2 * sampling_rate) {
+			unsigned int periods = time_elapsed / sampling_rate;
+
+			if (periods < idle_periods)
+				idle_periods = periods;
+		}
+
 		if (load > max_load)
 			max_load = load;
 	}
+
+	policy_dbs->idle_periods = idle_periods;
+
 	return max_load;
 }
 EXPORT_SYMBOL_GPL(dbs_update);
@@ -236,9 +246,9 @@ static void dbs_work_handler(struct work_struct *work)
 	 * Make sure cpufreq_governor_limits() isn't evaluating load or the
 	 * ondemand governor isn't updating the sampling rate in parallel.
 	 */
-	mutex_lock(&policy_dbs->timer_mutex);
-	gov_update_sample_delay(policy_dbs, gov->gov_dbs_timer(policy));
-	mutex_unlock(&policy_dbs->timer_mutex);
+	mutex_lock(&policy_dbs->update_mutex);
+	gov_update_sample_delay(policy_dbs, gov->gov_dbs_update(policy));
+	mutex_unlock(&policy_dbs->update_mutex);
 
 	/* Allow the utilization update handler to queue up more work. */
 	atomic_set(&policy_dbs->work_count, 0);
@@ -348,7 +358,7 @@ static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *poli
 		return NULL;
 
 	policy_dbs->policy = policy;
-	mutex_init(&policy_dbs->timer_mutex);
+	mutex_init(&policy_dbs->update_mutex);
 	atomic_set(&policy_dbs->work_count, 0);
 	init_irq_work(&policy_dbs->irq_work, dbs_irq_work);
 	INIT_WORK(&policy_dbs->work, dbs_work_handler);
@@ -367,7 +377,7 @@ static void free_policy_dbs_info(struct policy_dbs_info *policy_dbs,
 {
 	int j;
 
-	mutex_destroy(&policy_dbs->timer_mutex);
+	mutex_destroy(&policy_dbs->update_mutex);
 
 	for_each_cpu(j, policy_dbs->policy->related_cpus) {
 		struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
@@ -547,10 +557,10 @@ void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy)
 {
 	struct policy_dbs_info *policy_dbs = policy->governor_data;
 
-	mutex_lock(&policy_dbs->timer_mutex);
+	mutex_lock(&policy_dbs->update_mutex);
 	cpufreq_policy_apply_limits(policy);
 	gov_update_sample_delay(policy_dbs, 0);
 
-	mutex_unlock(&policy_dbs->timer_mutex);
+	mutex_unlock(&policy_dbs->update_mutex);
 }
 EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_limits);

drivers/cpufreq/cpufreq_governor.h

@@ -85,7 +85,7 @@ struct policy_dbs_info {
 	 * Per policy mutex that serializes load evaluation from limit-change
 	 * and work-handler.
 	 */
-	struct mutex timer_mutex;
+	struct mutex update_mutex;
 
 	u64 last_sample_time;
 	s64 sample_delay_ns;
@@ -97,6 +97,7 @@ struct policy_dbs_info {
 	struct list_head list;
 	/* Multiplier for increasing sample delay temporarily. */
 	unsigned int rate_mult;
+	unsigned int idle_periods;	/* For conservative */
 	/* Status indicators */
 	bool is_shared;		/* This object is used by multiple CPUs */
 	bool work_in_progress;	/* Work is being queued up or in progress */
@@ -135,7 +136,7 @@ struct dbs_governor {
 	 */
 	struct dbs_data *gdbs_data;
 
-	unsigned int (*gov_dbs_timer)(struct cpufreq_policy *policy);
+	unsigned int (*gov_dbs_update)(struct cpufreq_policy *policy);
 	struct policy_dbs_info *(*alloc)(void);
 	void (*free)(struct policy_dbs_info *policy_dbs);
 	int (*init)(struct dbs_data *dbs_data);

drivers/cpufreq/cpufreq_ondemand.c

@@ -25,7 +25,7 @@
 #define MAX_SAMPLING_DOWN_FACTOR		(100000)
 #define MICRO_FREQUENCY_UP_THRESHOLD		(95)
 #define MICRO_FREQUENCY_MIN_SAMPLE_RATE		(10000)
-#define MIN_FREQUENCY_UP_THRESHOLD		(11)
+#define MIN_FREQUENCY_UP_THRESHOLD		(1)
 #define MAX_FREQUENCY_UP_THRESHOLD		(100)
 
 static struct od_ops od_ops;
@@ -169,7 +169,7 @@ static void od_update(struct cpufreq_policy *policy)
 	}
 }
 
-static unsigned int od_dbs_timer(struct cpufreq_policy *policy)
+static unsigned int od_dbs_update(struct cpufreq_policy *policy)
 {
 	struct policy_dbs_info *policy_dbs = policy->governor_data;
 	struct dbs_data *dbs_data = policy_dbs->dbs_data;
@@ -191,7 +191,7 @@ static unsigned int od_dbs_timer(struct cpufreq_policy *policy)
 	od_update(policy);
 
 	if (dbs_info->freq_lo) {
-		/* Setup timer for SUB_SAMPLE */
+		/* Setup SUB_SAMPLE */
 		dbs_info->sample_type = OD_SUB_SAMPLE;
 		return dbs_info->freq_hi_delay_us;
 	}
@@ -255,11 +255,11 @@ static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
 	list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
 		/*
 		 * Doing this without locking might lead to using different
-		 * rate_mult values in od_update() and od_dbs_timer().
+		 * rate_mult values in od_update() and od_dbs_update().
 		 */
-		mutex_lock(&policy_dbs->timer_mutex);
+		mutex_lock(&policy_dbs->update_mutex);
 		policy_dbs->rate_mult = 1;
-		mutex_unlock(&policy_dbs->timer_mutex);
+		mutex_unlock(&policy_dbs->update_mutex);
 	}
 
 	return count;
@@ -374,8 +374,7 @@ static int od_init(struct dbs_data *dbs_data)
 		dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD;
 		/*
 		 * In nohz/micro accounting case we set the minimum frequency
-		 * not depending on HZ, but fixed (very low). The deferred
-		 * timer might skip some samples if idle/sleeping as needed.
+		 * not depending on HZ, but fixed (very low).
 		*/
 		dbs_data->min_sampling_rate = MICRO_FREQUENCY_MIN_SAMPLE_RATE;
 	} else {
@@ -415,7 +414,7 @@ static struct od_ops od_ops = {
 static struct dbs_governor od_dbs_gov = {
 	.gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"),
 	.kobj_type = { .default_attrs = od_attributes },
-	.gov_dbs_timer = od_dbs_timer,
+	.gov_dbs_update = od_dbs_update,
 	.alloc = od_alloc,
 	.free = od_free,
 	.init = od_init,

drivers/cpufreq/cpufreq_stats.c

@@ -41,6 +41,18 @@ static int cpufreq_stats_update(struct cpufreq_stats *stats)
 	return 0;
 }
 
+static void cpufreq_stats_clear_table(struct cpufreq_stats *stats)
+{
+	unsigned int count = stats->max_state;
+
+	memset(stats->time_in_state, 0, count * sizeof(u64));
+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
+	memset(stats->trans_table, 0, count * count * sizeof(int));
+#endif
+	stats->last_time = get_jiffies_64();
+	stats->total_trans = 0;
+}
+
 static ssize_t show_total_trans(struct cpufreq_policy *policy, char *buf)
 {
 	return sprintf(buf, "%d\n", policy->stats->total_trans);
@@ -64,6 +76,14 @@ static ssize_t show_time_in_state(struct cpufreq_policy *policy, char *buf)
 	return len;
 }
 
+static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf,
+			   size_t count)
+{
+	/* We don't care what is written to the attribute. */
+	cpufreq_stats_clear_table(policy->stats);
+	return count;
+}
+
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
 {
@@ -113,10 +133,12 @@ cpufreq_freq_attr_ro(trans_table);
 
 cpufreq_freq_attr_ro(total_trans);
 cpufreq_freq_attr_ro(time_in_state);
+cpufreq_freq_attr_wo(reset);
 
 static struct attribute *default_attrs[] = {
 	&total_trans.attr,
 	&time_in_state.attr,
+	&reset.attr,
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	&trans_table.attr,
 #endif

drivers/cpufreq/integrator-cpufreq.c

-/*
- *  Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * CPU support functions
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-static void __iomem *cm_base;
-/* The cpufreq driver only use the OSC register */
-#define INTEGRATOR_HDR_OSC_OFFSET       0x08
-#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
-
-static struct cpufreq_driver integrator_driver;
-
-static const struct icst_params lclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 8,
-	.vd_max		= 132,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static const struct icst_params cclk_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST525_VCO_MAX_5V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 160,
-	.rd_min		= 24,
-	.rd_max		= 24,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-/*
- * Validate the speed policy.
- */
-static int integrator_verify_policy(struct cpufreq_policy *policy)
-{
-	struct icst_vco vco;
-
-	cpufreq_verify_within_cpu_limits(policy);
-
-	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
-	policy->max = icst_hz(&cclk_params, vco) / 1000;
-
-	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
-	policy->min = icst_hz(&cclk_params, vco) / 1000;
-
-	cpufreq_verify_within_cpu_limits(policy);
-	return 0;
-}
-
-
-static int integrator_set_target(struct cpufreq_policy *policy,
-				 unsigned int target_freq,
-				 unsigned int relation)
-{
-	cpumask_t cpus_allowed;
-	int cpu = policy->cpu;
-	struct icst_vco vco;
-	struct cpufreq_freqs freqs;
-	u_int cm_osc;
-
-	/*
-	 * Save this threads cpus_allowed mask.
-	 */
-	cpus_allowed = current->cpus_allowed;
-
-	/*
-	 * Bind to the specified CPU.  When this call returns,
-	 * we should be running on the right CPU.
-	 */
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* get current setting */
-	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-
-	if (machine_is_integrator())
-		vco.s = (cm_osc >> 8) & 7;
-	else if (machine_is_cintegrator())
-		vco.s = 1;
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-	freqs.old = icst_hz(&cclk_params, vco) / 1000;
-
-	/* icst_hz_to_vco rounds down -- so we need the next
-	 * larger freq in case of CPUFREQ_RELATION_L.
-	 */
-	if (relation == CPUFREQ_RELATION_L)
-		target_freq += 999;
-	if (target_freq > policy->max)
-		target_freq = policy->max;
-	vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
-	freqs.new = icst_hz(&cclk_params, vco) / 1000;
-
-	if (freqs.old == freqs.new) {
-		set_cpus_allowed_ptr(current, &cpus_allowed);
-		return 0;
-	}
-
-	cpufreq_freq_transition_begin(policy, &freqs);
-
-	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-
-	if (machine_is_integrator()) {
-		cm_osc &= 0xfffff800;
-		cm_osc |= vco.s << 8;
-	} else if (machine_is_cintegrator()) {
-		cm_osc &= 0xffffff00;
-	}
-	cm_osc |= vco.v;
-
-	__raw_writel(0xa05f, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
-	__raw_writel(cm_osc, cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-	__raw_writel(0, cm_base + INTEGRATOR_HDR_LOCK_OFFSET);
-
-	/*
-	 * Restore the CPUs allowed mask.
-	 */
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-
-	cpufreq_freq_transition_end(policy, &freqs, 0);
-
-	return 0;
-}
-
-static unsigned int integrator_get(unsigned int cpu)
-{
-	cpumask_t cpus_allowed;
-	unsigned int current_freq;
-	u_int cm_osc;
-	struct icst_vco vco;
-
-	cpus_allowed = current->cpus_allowed;
-
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-	BUG_ON(cpu != smp_processor_id());
-
-	/* detect memory etc. */
-	cm_osc = __raw_readl(cm_base + INTEGRATOR_HDR_OSC_OFFSET);
-
-	if (machine_is_integrator())
-		vco.s = (cm_osc >> 8) & 7;
-	else
-		vco.s = 1;
-	vco.v = cm_osc & 255;
-	vco.r = 22;
-
-	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
-
-	set_cpus_allowed_ptr(current, &cpus_allowed);
-
-	return current_freq;
-}
-
-static int integrator_cpufreq_init(struct cpufreq_policy *policy)
-{
-
-	/* set default policy and cpuinfo */
-	policy->max = policy->cpuinfo.max_freq = 160000;
-	policy->min = policy->cpuinfo.min_freq = 12000;
-	policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */
-
-	return 0;
-}
-
-static struct cpufreq_driver integrator_driver = {
-	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK,
-	.verify		= integrator_verify_policy,
-	.target		= integrator_set_target,
-	.get		= integrator_get,
-	.init		= integrator_cpufreq_init,
-	.name		= "integrator",
-};
-
-static int __init integrator_cpufreq_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	cm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!cm_base)
-		return -ENODEV;
-
-	return cpufreq_register_driver(&integrator_driver);
-}
-
-static int __exit integrator_cpufreq_remove(struct platform_device *pdev)
-{
-	return cpufreq_unregister_driver(&integrator_driver);
-}
-
-static const struct of_device_id integrator_cpufreq_match[] = {
-	{ .compatible = "arm,core-module-integrator"},
-	{ },
-};
-
-MODULE_DEVICE_TABLE(of, integrator_cpufreq_match);
-
-static struct platform_driver integrator_cpufreq_driver = {
-	.driver = {
-		.name = "integrator-cpufreq",
-		.of_match_table = integrator_cpufreq_match,
-	},
-	.remove = __exit_p(integrator_cpufreq_remove),
-};
-
-module_platform_driver_probe(integrator_cpufreq_driver,
-			     integrator_cpufreq_probe);
-
-MODULE_AUTHOR("Russell M. King");
-MODULE_DESCRIPTION("cpufreq driver for ARM Integrator CPUs");
-MODULE_LICENSE("GPL");

drivers/cpufreq/powernv-cpufreq.c

@@ -42,6 +42,10 @@
 #define PMSR_PSAFE_ENABLE	(1UL << 30)
 #define PMSR_SPR_EM_DISABLE	(1UL << 31)
 #define PMSR_MAX(x)		((x >> 32) & 0xFF)
+#define LPSTATE_SHIFT		48
+#define GPSTATE_SHIFT		56
+#define GET_LPSTATE(x)		(((x) >> LPSTATE_SHIFT) & 0xFF)
+#define GET_GPSTATE(x)		(((x) >> GPSTATE_SHIFT) & 0xFF)
 
 #define MAX_RAMP_DOWN_TIME				5120
 /*
@@ -592,7 +596,8 @@ void gpstate_timer_handler(unsigned long data)
 {
 	struct cpufreq_policy *policy = (struct cpufreq_policy *)data;
 	struct global_pstate_info *gpstates = policy->driver_data;
-	int gpstate_idx;
+	int gpstate_idx, lpstate_idx;
+	unsigned long val;
 	unsigned int time_diff = jiffies_to_msecs(jiffies)
 					- gpstates->last_sampled_time;
 	struct powernv_smp_call_data freq_data;
@@ -600,21 +605,37 @@ void gpstate_timer_handler(unsigned long data)
 	if (!spin_trylock(&gpstates->gpstate_lock))
 		return;
 
+	/*
+	 * If PMCR was last updated was using fast_swtich then
+	 * We may have wrong in gpstate->last_lpstate_idx
+	 * value. Hence, read from PMCR to get correct data.
+	 */
+	val = get_pmspr(SPRN_PMCR);
+	freq_data.gpstate_id = (s8)GET_GPSTATE(val);
+	freq_data.pstate_id = (s8)GET_LPSTATE(val);
+	if (freq_data.gpstate_id  == freq_data.pstate_id) {
+		reset_gpstates(policy);
+		spin_unlock(&gpstates->gpstate_lock);
+		return;
+	}
+
 	gpstates->last_sampled_time += time_diff;
 	gpstates->elapsed_time += time_diff;
-	freq_data.pstate_id = idx_to_pstate(gpstates->last_lpstate_idx);
 
-	if ((gpstates->last_gpstate_idx == gpstates->last_lpstate_idx) ||
-	    (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME)) {
+	if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) {
 		gpstate_idx = pstate_to_idx(freq_data.pstate_id);
+		lpstate_idx = gpstate_idx;
 		reset_gpstates(policy);
 		gpstates->highest_lpstate_idx = gpstate_idx;
 	} else {
+		lpstate_idx = pstate_to_idx(freq_data.pstate_id);
 		gpstate_idx = calc_global_pstate(gpstates->elapsed_time,
 						 gpstates->highest_lpstate_idx,
-						 gpstates->last_lpstate_idx);
+						 lpstate_idx);
 	}
-
+	freq_data.gpstate_id = idx_to_pstate(gpstate_idx);
+	gpstates->last_gpstate_idx = gpstate_idx;
+	gpstates->last_lpstate_idx = lpstate_idx;
 	/*
 	 * If local pstate is equal to global pstate, rampdown is over
 	 * So timer is not required to be queued.
@@ -622,10 +643,6 @@ void gpstate_timer_handler(unsigned long data)
 	if (gpstate_idx != gpstates->last_lpstate_idx)
 		queue_gpstate_timer(gpstates);
 
-	freq_data.gpstate_id = idx_to_pstate(gpstate_idx);
-	gpstates->last_gpstate_idx = pstate_to_idx(freq_data.gpstate_id);
-	gpstates->last_lpstate_idx = pstate_to_idx(freq_data.pstate_id);
-
 	spin_unlock(&gpstates->gpstate_lock);
 
 	/* Timer may get migrated to a different cpu on cpu hot unplug */
@@ -647,8 +664,14 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
 	if (unlikely(rebooting) && new_index != get_nominal_index())
 		return 0;
 
-	if (!throttled)
+	if (!throttled) {
+		/* we don't want to be preempted while
+		 * checking if the CPU frequency has been throttled
+		 */
+		preempt_disable();
 		powernv_cpufreq_throttle_check(NULL);
+		preempt_enable();
+	}
 
 	cur_msec = jiffies_to_msecs(get_jiffies_64());
 
@@ -752,9 +775,12 @@ static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	spin_lock_init(&gpstates->gpstate_lock);
 	ret = cpufreq_table_validate_and_show(policy, powernv_freqs);
 
-	if (ret < 0)
+	if (ret < 0) {
 		kfree(policy->driver_data);
+		return ret;
+	}
 
+	policy->fast_switch_possible = true;
 	return ret;
 }
 
@@ -897,6 +923,20 @@ static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
 	del_timer_sync(&gpstates->timer);
 }
 
+static unsigned int powernv_fast_switch(struct cpufreq_policy *policy,
+					unsigned int target_freq)
+{
+	int index;
+	struct powernv_smp_call_data freq_data;
+
+	index = cpufreq_table_find_index_dl(policy, target_freq);
+	freq_data.pstate_id = powernv_freqs[index].driver_data;
+	freq_data.gpstate_id = powernv_freqs[index].driver_data;
+	set_pstate(&freq_data);
+
+	return powernv_freqs[index].frequency;
+}
+
 static struct cpufreq_driver powernv_cpufreq_driver = {
 	.name		= "powernv-cpufreq",
 	.flags		= CPUFREQ_CONST_LOOPS,
@@ -904,6 +944,7 @@ static struct cpufreq_driver powernv_cpufreq_driver = {
 	.exit		= powernv_cpufreq_cpu_exit,
 	.verify		= cpufreq_generic_frequency_table_verify,
 	.target_index	= powernv_cpufreq_target_index,
+	.fast_switch	= powernv_fast_switch,
 	.get		= powernv_cpufreq_get,
 	.stop_cpu	= powernv_cpufreq_stop_cpu,
 	.attr		= powernv_cpu_freq_attr,

drivers/cpuidle/cpuidle-powernv.c

@@ -22,7 +22,7 @@
 
 #define POWERNV_THRESHOLD_LATENCY_NS 200000
 
-struct cpuidle_driver powernv_idle_driver = {
+static struct cpuidle_driver powernv_idle_driver = {
 	.name             = "powernv_idle",
 	.owner            = THIS_MODULE,
 };

drivers/cpuidle/cpuidle.c

@@ -97,7 +97,23 @@ static int find_deepest_state(struct cpuidle_driver *drv,
 	return ret;
 }
 
-#ifdef CONFIG_SUSPEND
+/**
+ * cpuidle_use_deepest_state - Set/clear governor override flag.
+ * @enable: New value of the flag.
+ *
+ * Set/unset the current CPU to use the deepest idle state (override governors
+ * going forward if set).
+ */
+void cpuidle_use_deepest_state(bool enable)
+{
+	struct cpuidle_device *dev;
+
+	preempt_disable();
+	dev = cpuidle_get_device();
+	dev->use_deepest_state = enable;
+	preempt_enable();
+}
+
 /**
  * cpuidle_find_deepest_state - Find the deepest available idle state.
  * @drv: cpuidle driver for the given CPU.
@@ -109,6 +125,7 @@ int cpuidle_find_deepest_state(struct cpuidle_driver *drv,
 	return find_deepest_state(drv, dev, UINT_MAX, 0, false);
 }
 
+#ifdef CONFIG_SUSPEND
 static void enter_freeze_proper(struct cpuidle_driver *drv,
 				struct cpuidle_device *dev, int index)
 {

drivers/cpuidle/dt_idle_states.c

@@ -38,6 +38,12 @@ static int init_state_node(struct cpuidle_state *idle_state,
 	 * state enter function.
 	 */
 	idle_state->enter = match_id->data;
+	/*
+	 * Since this is not a "coupled" state, it's safe to assume interrupts
+	 * won't be enabled when it exits allowing the tick to be frozen
+	 * safely. So enter() can be also enter_freeze() callback.
+	 */
+	idle_state->enter_freeze = match_id->data;
 
 	err = of_property_read_u32(state_node, "wakeup-latency-us",
 				   &idle_state->exit_latency);

drivers/cpuidle/governor.c

@@ -9,7 +9,6 @@
  */
 
 #include <linux/mutex.h>
-#include <linux/module.h>
 #include <linux/cpuidle.h>
 
 #include "cpuidle.h"
@@ -53,14 +52,11 @@ int cpuidle_switch_governor(struct cpuidle_governor *gov)
 	if (cpuidle_curr_governor) {
 		list_for_each_entry(dev, &cpuidle_detected_devices, device_list)
 			cpuidle_disable_device(dev);
-		module_put(cpuidle_curr_governor->owner);
 	}
 
 	cpuidle_curr_governor = gov;
 
 	if (gov) {
-		if (!try_module_get(cpuidle_curr_governor->owner))
-			return -EINVAL;
 		list_for_each_entry(dev, &cpuidle_detected_devices, device_list)
 			cpuidle_enable_device(dev);
 		cpuidle_install_idle_handler();

drivers/cpuidle/governors/ladder.c

@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/cpuidle.h>
 #include <linux/pm_qos.h>
-#include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/tick.h>
 
@@ -177,7 +176,6 @@ static struct cpuidle_governor ladder_governor = {
 	.enable =	ladder_enable_device,
 	.select =	ladder_select_state,
 	.reflect =	ladder_reflect,
-	.owner =	THIS_MODULE,
 };
 
 /**

drivers/cpuidle/governors/menu.c

@@ -19,7 +19,6 @@
 #include <linux/tick.h>
 #include <linux/sched.h>
 #include <linux/math64.h>
-#include <linux/module.h>
 
 /*
  * Please note when changing the tuning values:
@@ -484,7 +483,6 @@ static struct cpuidle_governor menu_governor = {
 	.enable =	menu_enable_device,
 	.select =	menu_select,
 	.reflect =	menu_reflect,
-	.owner =	THIS_MODULE,
 };
 
 /**

drivers/cpuidle/sysfs.c

@@ -403,8 +403,10 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 	/* state statistics */
 	for (i = 0; i < drv->state_count; i++) {
 		kobj = kzalloc(sizeof(struct cpuidle_state_kobj), GFP_KERNEL);
-		if (!kobj)
+		if (!kobj) {
+			ret = -ENOMEM;
 			goto error_state;
+		}
 		kobj->state = &drv->states[i];
 		kobj->state_usage = &device->states_usage[i];
 		init_completion(&kobj->kobj_unregister);

drivers/devfreq/devfreq.c

@@ -850,7 +850,7 @@ int devfreq_add_governor(struct devfreq_governor *governor)
 EXPORT_SYMBOL(devfreq_add_governor);
 
 /**
- * devfreq_remove_device() - Remove devfreq feature from a device.
+ * devfreq_remove_governor() - Remove devfreq feature from a device.
  * @governor:	the devfreq governor to be removed
  */
 int devfreq_remove_governor(struct devfreq_governor *governor)

drivers/devfreq/event/exynos-nocp.c

@@ -190,6 +190,7 @@ static const struct of_device_id exynos_nocp_id_match[] = {
 	{ .compatible = "samsung,exynos5420-nocp", },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, exynos_nocp_id_match);
 
 static struct regmap_config exynos_nocp_regmap_config = {
 	.reg_bits = 32,

drivers/devfreq/event/rockchip-dfi.c

@@ -188,6 +188,7 @@ static const struct of_device_id rockchip_dfi_id_match[] = {
 	{ .compatible = "rockchip,rk3399-dfi" },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, rockchip_dfi_id_match);
 
 static int rockchip_dfi_probe(struct platform_device *pdev)
 {