Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes for ARM platforms for 3.12.  Among them:

   - A fix for build breakage in the MTD subsystem for some PXA devices.
     David Woodhouse has this patch in his for-next branch but has not
     been responding to our requests to send it up so here it is.  I
     should have amended the commit message to describe the build
     failure for CONFIG_OF=n setups, but forgot and now it's down in the
     stack of commits.

   - Added device-tree for the BeagleBone Black.  Turns out people have
     been using the older "regualar" bone DT for the newer boards, and
     there's risk of damaging hardware that way.

   - Misc DT and regular fixes for OMAP.

   - Fix to make the ST-Ericsson "snowball" boards boot with
     multi_v7_defconfig, and enable one of the ST-E reference boards on
     the same config.

   - Kconfig cleanup for u300 to hide submenus when the platform isn't
     enabled.

   - Enable ARM_ATAG_DTB_COMPAT to let firmware override command line
     when booting with an appended devicetree on non-DT-enabled firmware
     (needed to boot snowball)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: multi_v7: add HREFv60 to multi_v7 defconfig
  ARM: OMAP2+: mux: fix trivial typo in name
  ARM: OMAP4 SMP: Corrected a typo fucntions to functions
  ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally
  mailbox: remove unnecessary platform_set_drvdata()
  ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y
  ARM: OMAP: fix return value check in omap_device_build_from_dt()
  ARM: OMAP4: Fix clock_get error for GPMC during boot
  ARM: sa1100: collie.c: fall back to jedec_probe flash detection
  ARM: u300: hide submenus
  ARM: dts: igep00x0: Add pinmux configuration for MCBSP2
  ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze
  ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard
  mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF
  ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT
  ARM: ux500: disable outer cache debug
  ARM: dts: OMAP5: fix ocp2scp DTS data
  ARM: dts: OMAP5: fix reg property size
  ARM: dts: am335x-bone*: add DT for BeagleBone Black
  ARM: dts: omap3-beagle-xm: fix string error in compatible property
  ...

arch/arm/boot/dts/Makefile

@@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
 	am335x-bone.dtb \
+	am335x-boneblack.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	am43x-epos-evm.dtb

arch/arm/boot/dts/am335x-bone-common.dtsi

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout2_pin>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+	};
+
+	ocp {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
+			status = "okay";
+		};
+
+		musb: usb@47400000 {
+			status = "okay";
+
+			control@44e10000 {
+				status = "okay";
+			};
+
+			usb-phy@47401300 {
+				status = "okay";
+			};
+
+			usb-phy@47401b00 {
+				status = "okay";
+			};
+
+			usb@47401000 {
+				status = "okay";
+			};
+
+			usb@47401800 {
+				status = "okay";
+				dr_mode = "host";
+			};
+
+			dma-controller@07402000  {
+				status = "okay";
+			};
+		};
+
+		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@24 {
+				reg = <0x24>;
+			};
+
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};

arch/arm/boot/dts/am335x-bone.dts

@@ -8,258 +8,4 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb-phy@47401b00 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-
-			usb@47401800 {
-				status = "okay";
-				dr_mode = "host";
-			};
-
-			dma-controller@07402000  {
-				status = "okay";
-			};
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@24 {
-				reg = <0x24>;
-			};
-
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-};
+#include "am335x-bone-common.dtsi"

arch/arm/boot/dts/am335x-boneblack.dts

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};

arch/arm/boot/dts/imx27.dtsi

@@ -187,7 +187,7 @@ cspi1: cspi@1000e000 {
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 53>;
+				clocks = <&clks 53>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -198,7 +198,7 @@ cspi2: cspi@1000f000 {
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 52>;
+				clocks = <&clks 52>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -309,7 +309,7 @@ cspi3: cspi@10017000 {
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 51>;
+				clocks = <&clks 51>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/imx51.dtsi

@@ -474,7 +474,7 @@ pata: pata@83fe0000 {
 				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
 				reg = <0x83fe0000 0x4000>;
 				interrupts = <70>;
-				clocks = <&clks 161>;
+				clocks = <&clks 172>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6q-pinfunc.h

@@ -207,8 +207,8 @@
 #define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
 #define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
 #define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c4 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c4 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
 #define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
 #define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
 #define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -11,7 +11,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-igep.dtsi

@@ -48,6 +48,15 @@ uart3_pins: pinmux_uart3_pins {
 		>;
 	};
 
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
+			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
+			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
+			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -93,6 +102,11 @@ &i2c2 {
 	clock-frequency = <400000>;
 };
 
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
 &mmc1 {
       pinctrl-names = "default";
       pinctrl-0 = <&mmc1_pins>;

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -107,6 +107,19 @@ hsusb1_phy: hsusb1_phy {
 	 */
 		clock-frequency = <19200000>;
 	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -235,6 +248,33 @@ led_wkgpio_pins: pinmux_leds_wkpins {
 			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
+
+	/*
+	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE0)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -314,8 +354,12 @@ &mmc4 {
 };
 
 &mmc5 {
-	ti,non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
+	cap-power-off-card;
 };
 
 &emif1 {

arch/arm/boot/dts/omap4-sdp.dts

@@ -140,6 +140,19 @@ sound {
 			"DMic", "Digital Mic",
 			"Digital Mic", "Digital Mic1 Bias";
 	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 22 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -295,6 +308,26 @@ i2c4_pins: pinmux_i2c4_pins {
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -420,8 +453,12 @@ &mmc4 {
 };
 
 &mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
-	ti,non-removable;
+	cap-power-off-card;
 };
 
 &emif1 {

arch/arm/boot/dts/omap5.dtsi

@@ -637,7 +637,7 @@ omap_control_usb: omap-control-usb@4a002300 {
 		omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
-			reg = <0x4a020000 0x1000>;
+			reg = <0x4a020000 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -645,17 +645,18 @@ omap_dwc3@4a020000 {
 			ranges;
 			dwc3@4a030000 {
 				compatible = "snps,dwc3";
-				reg = <0x4a030000 0x1000>;
+				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
 				tx-fifo-resize;
 			};
 		};
 
-		ocp2scp {
+		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x4a080000 0x20>;
 			ranges;
 			ti,hwmods = "ocp2scp1";
 			usb2_phy: usb2phy@4a084000 {

arch/arm/configs/multi_v7_defconfig

@@ -36,6 +36,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_TEGRA_PCI=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_ARCH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_UX500_DT=y
 CONFIG_ARCH_VEXPRESS=y
@@ -46,6 +47,7 @@ CONFIG_ARCH_ZYNQ=y
 CONFIG_SMP=y
 CONFIG_HIGHPTE=y
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y

arch/arm/mach-imx/clk-fixup-mux.c

@@ -90,6 +90,7 @@ struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
 	init.ops = &clk_fixup_mux_ops;
 	init.parent_names = parents;
 	init.num_parents = num_parents;
+	init.flags = 0;
 
 	fixup_mux->mux.reg = reg;
 	fixup_mux->mux.shift = shift;

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -397,7 +397,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
 	clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
 				spdif_sel, ARRAY_SIZE(spdif_sel));
-	clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
+	clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
 	clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
 	clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
 				mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));

arch/arm/mach-imx/system.c

@@ -117,6 +117,17 @@ void __init imx_init_l2cache(void)
 	/* Configure the L2 PREFETCH and POWER registers */
 	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
 	val |= 0x70800000;
+	/*
+	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
+	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
+	 * But according to ARM PL310 errata: 752271
+	 * ID: 752271: Double linefill feature can cause data corruption
+	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
+	 * Workaround: The only workaround to this erratum is to disable the
+	 * double linefill feature. This is the default behavior.
+	 */
+	if (cpu_is_imx6q())
+		val &= ~(1 << 30 | 1 << 23);
 	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
 	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
 	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);

arch/arm/mach-omap2/cclock44xx_data.c

@@ -1632,7 +1632,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck),
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck),
-	CLK("omap-gpmc",	"fck",			&dummy_ck),
+	CLK("50000000.gpmc",	"fck",			&dummy_ck),
 	CLK("omap_i2c.1",	"ick",			&dummy_ck),
 	CLK("omap_i2c.2",	"ick",			&dummy_ck),
 	CLK("omap_i2c.3",	"ick",			&dummy_ck),

arch/arm/mach-omap2/cpuidle44xx.c

@@ -143,7 +143,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
-	if ((cx->mpu_state == PWRDM_POWER_RET) &&
+	if (dev->cpu == 0 && (cx->mpu_state == PWRDM_POWER_RET) &&
 		(cx->mpu_logic_state == PWRDM_POWER_OFF))
 		cpu_cluster_pm_exit();
 

arch/arm/mach-omap2/gpmc.c

@@ -1491,8 +1491,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	 */
 	ret = gpmc_cs_remap(cs, res.start);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
-			cs, res.start);
+		dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
+			cs, &res.start);
 		goto err;
 	}
 

arch/arm/mach-omap2/mux34xx.c

@@ -620,7 +620,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
 		"gpio_149", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_RX, 151,
-		"uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
+		"uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
 		"gpio_151", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_TX, 148,
 		"uart1_tx", "ssi1_dat_tx", NULL, NULL,

arch/arm/mach-omap2/omap-smp.c

 /*
- * OMAP4 SMP source file. It contains platform specific fucntions
+ * OMAP4 SMP source file. It contains platform specific functions
  * needed for the linux smp kernel.
  *
  * Copyright (C) 2009 Texas Instruments, Inc.

arch/arm/mach-omap2/omap_device.c

@@ -158,7 +158,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	}
 
 	od = omap_device_alloc(pdev, hwmods, oh_cnt);
-	if (!od) {
+	if (IS_ERR(od)) {
 		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
 			oh_name);
 		ret = PTR_ERR(od);

arch/arm/mach-sa1100/collie.c

@@ -289,7 +289,7 @@ static void collie_flash_exit(void)
 }
 
 static struct flash_platform_data collie_flash_data = {
-	.map_name	= "cfi_probe",
+	.map_name	= "jedec_probe",
 	.init		= collie_flash_init,
 	.set_vpp	= collie_set_vpp,
 	.exit		= collie_flash_exit,

arch/arm/mach-u300/Kconfig

-menu "ST-Ericsson AB U300/U335 Platform"
-
-comment "ST-Ericsson Mobile Platform Products"
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
 	depends on MMU
@@ -25,7 +21,9 @@ config ARCH_U300
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
-comment "ST-Ericsson U300/U335 Feature Selections"
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U335 Platform"
 
 config MACH_U300
 	depends on ARCH_U300
@@ -53,3 +51,5 @@ config MACH_U300_SPIDUMMY
 		SPI framework and ARM PL022 support.
 
 endmenu
+
+endif

arch/arm/mach-ux500/cache-l2x0.c

@@ -69,6 +69,7 @@ static int __init ux500_l2x0_init(void)
 	 * some SMI service available.
 	 */
 	outer_cache.disable = NULL;
+	outer_cache.set_debug = NULL;
 
 	return 0;
 }

drivers/mailbox/mailbox-omap2.c

@@ -325,7 +325,6 @@ static int omap2_mbox_remove(struct platform_device *pdev)
 	kfree(privblk);
 	kfree(mboxblk);
 	kfree(list);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/mtd/nand/pxa3xx_nand.c

@@ -1236,7 +1236,6 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static struct of_device_id pxa3xx_nand_dt_ids[] = {
 	{
 		.compatible = "marvell,pxa3xx-nand",
@@ -1284,12 +1283,6 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
 
 	return 0;
 }
-#else
-static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev)
-{
-	return 0;
-}
-#endif
 
 static int pxa3xx_nand_probe(struct platform_device *pdev)
 {