staging: fbtft: fb_tls8204: Fix checkpatch warning

Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line
Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/fbtft/fb_tls8204.c

@@ -44,21 +44,21 @@ static int init_display(struct fbtft_par *par)
 	par->fbtftops.reset(par);
 
 	/* Enter extended command mode */
-	write_reg(par, 0x21); /* 5:1  1
-				 2:0  PD - Powerdown control: chip is active
-				 1:0  V  - Entry mode: horizontal addressing
-				 0:1  H  - Extended instruction set control:
-						extended
-			      */
+	write_reg(par, 0x21);	/* 5:1  1
+				 * 2:0  PD - Powerdown control: chip is active
+				 * 1:0  V  - Entry mode: horizontal addressing
+				 * 0:1  H  - Extended instruction set control:
+				 *	     extended
+				 */
 
 	/* H=1 Bias system */
-	write_reg(par, 0x10 | (bs & 0x7)); /*
-				 4:1  1
-				 3:0  0
-				 2:x  BS2 - Bias System
-				 1:x  BS1
-				 0:x  BS0
-			      */
+	write_reg(par, 0x10 | (bs & 0x7));
+				/* 4:1  1
+				 * 3:0  0
+				 * 2:x  BS2 - Bias System
+				 * 1:x  BS1
+				 * 0:x  BS0
+				 */
 
 	/* Set the address of the first display line. */
 	write_reg(par, 0x04 | (64 >> 6));
@@ -68,12 +68,12 @@ static int init_display(struct fbtft_par *par)
 	write_reg(par, 0x20);
 
 	/* H=0 Display control */
-	write_reg(par, 0x08 | 4); /*
-				 3:1  1
-				 2:1  D  - DE: 10=normal mode
-				 1:0  0
-				 0:0  E
-			      */
+	write_reg(par, 0x08 | 4);
+				/* 3:1  1
+				 * 2:1  D - DE: 10=normal mode
+				 * 1:0  0
+				 * 0:0  E
+				 */
 
 	return 0;
 }
@@ -81,15 +81,15 @@ static int init_display(struct fbtft_par *par)
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
 	/* H=0 Set X address of RAM */
-	write_reg(par, 0x80); /* 7:1  1
-				 6-0: X[6:0] - 0x00
-			      */
+	write_reg(par, 0x80);	/* 7:1  1
+				 * 6-0: X[6:0] - 0x00
+				 */
 
 	/* H=0 Set Y address of RAM */
-	write_reg(par, 0x40); /* 7:0  0
-				 6:1  1
-				 2-0: Y[2:0] - 0x0
-			      */
+	write_reg(par, 0x40);	/* 7:0  0
+				 * 6:1  1
+				 * 2-0: Y[2:0] - 0x0
+				 */
 }
 
 static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
@@ -100,8 +100,9 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
 
 	for (y = 0; y < HEIGHT / 8; y++) {
 		u8 *buf = par->txbuf.buf;
-		/* The display is 102x68 but the LCD is 84x48.  Set
-		   the write pointer at the start of each row. */
+		/* The display is 102x68 but the LCD is 84x48.
+		 * Set the write pointer at the start of each row.
+		 */
 		gpio_set_value(par->gpio.dc, 0);
 		write_reg(par, 0x80 | 0);
 		write_reg(par, 0x40 | y);