Commit 7bcad0f0 authored by Steffen Bätz's avatar Steffen Bätz Committed by Jakub Kicinski

net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only

Do not set the MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP bit on CPU or DSA ports.

This allows the host CPU port to be a regular IGMP listener by sending out
IGMP Membership Reports, which would otherwise not be forwarded by the
mv88exxx chip, but directly looped back to the CPU port itself.

Fixes: 54d792f2 ("net: dsa: Centralise global and port setup code into mv88e6xxx.")
Signed-off-by: default avatarSteffen Bätz <steffen@innosonix.de>
Signed-off-by: default avatarFabio Estevam <festevam@denx.de>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarVladimir Oltean <olteanv@gmail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230329150140.701559-1-festevam@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 2eca98e5
...@@ -3354,9 +3354,14 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) ...@@ -3354,9 +3354,14 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
* If this is the upstream port for this switch, enable * If this is the upstream port for this switch, enable
* forwarding of unknown unicasts and multicasts. * forwarding of unknown unicasts and multicasts.
*/ */
reg = MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP | reg = MV88E6185_PORT_CTL0_USE_TAG | MV88E6185_PORT_CTL0_USE_IP |
MV88E6185_PORT_CTL0_USE_TAG | MV88E6185_PORT_CTL0_USE_IP |
MV88E6XXX_PORT_CTL0_STATE_FORWARDING; MV88E6XXX_PORT_CTL0_STATE_FORWARDING;
/* Forward any IPv4 IGMP or IPv6 MLD frames received
* by a USER port to the CPU port to allow snooping.
*/
if (dsa_is_user_port(ds, port))
reg |= MV88E6XXX_PORT_CTL0_IGMP_MLD_SNOOP;
err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL0, reg); err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_CTL0, reg);
if (err) if (err)
return err; return err;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment