Commit 7bd39354 authored by James Ban's avatar James Ban Committed by Mark Brown

regulator: da9211: support da9215

This is a patch for supporting da9215 buck converter.
Signed-off-by: default avatarJames Ban <james.ban.opensource@diasemi.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent d770e558
* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
Required properties:
- compatible: "dlg,da9211" or "dlg,da9213".
- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
- reg: I2C slave address, usually 0x68.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
......@@ -66,3 +66,31 @@ Example 2) DA9213
};
};
};
Example 3) DA9215
pmic: da9215@68 {
compatible = "dlg,da9215";
reg = <0x68>;
interrupts = <3 27>;
regulators {
BUCKA {
regulator-name = "VBUCKA";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <4000000>;
regulator-max-microamp = <7000000>;
enable-gpios = <&gpio 27 0>;
};
BUCKB {
regulator-name = "VBUCKB";
regulator-min-microvolt = < 300000>;
regulator-max-microvolt = <1570000>;
regulator-min-microamp = <4000000>;
regulator-max-microamp = <7000000>;
enable-gpios = <&gpio 17 0>;
};
};
};
......@@ -209,13 +209,13 @@ config REGULATOR_DA9210
interface.
config REGULATOR_DA9211
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214 regulator"
tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
depends on I2C
select REGMAP_I2C
help
Say y here to support for the Dialog Semiconductor DA9211/DA9212
/DA9213/DA9214.
The DA9211/DA9212/DA9213/DA9214 is a multi-phase synchronous
/DA9213/DA9214/DA9215.
The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
step down converter 12A or 16A DC-DC Buck controlled through an I2C
interface.
......
/*
* da9211-regulator.c - Regulator device driver for DA9211/DA9213
* Copyright (C) 2014 Dialog Semiconductor Ltd.
* da9211-regulator.c - Regulator device driver for DA9211/DA9213/DA9215
* Copyright (C) 2015 Dialog Semiconductor Ltd.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
......@@ -32,6 +32,7 @@
/* DEVICE IDs */
#define DA9211_DEVICE_ID 0x22
#define DA9213_DEVICE_ID 0x23
#define DA9215_DEVICE_ID 0x24
#define DA9211_BUCK_MODE_SLEEP 1
#define DA9211_BUCK_MODE_SYNC 2
......@@ -90,6 +91,13 @@ static const int da9213_current_limits[] = {
3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
};
/* Current limits for DA9215 buck (uA) indices
* corresponds with register values
*/
static const int da9215_current_limits[] = {
4000000, 4200000, 4400000, 4600000, 4800000, 5000000, 5200000, 5400000,
5600000, 5800000, 6000000, 6200000, 6400000, 6600000, 6800000, 7000000
};
static unsigned int da9211_buck_get_mode(struct regulator_dev *rdev)
{
......@@ -157,6 +165,10 @@ static int da9211_set_current_limit(struct regulator_dev *rdev, int min,
current_limits = da9213_current_limits;
max_size = ARRAY_SIZE(da9213_current_limits)-1;
break;
case DA9215:
current_limits = da9215_current_limits;
max_size = ARRAY_SIZE(da9215_current_limits)-1;
break;
default:
return -EINVAL;
}
......@@ -189,6 +201,9 @@ static int da9211_get_current_limit(struct regulator_dev *rdev)
case DA9213:
current_limits = da9213_current_limits;
break;
case DA9215:
current_limits = da9215_current_limits;
break;
default:
return -EINVAL;
}
......@@ -350,13 +365,11 @@ static int da9211_regulator_init(struct da9211 *chip)
/* If configuration for 1/2 bucks is different between platform data
* and the register, driver should exit.
*/
if ((chip->pdata->num_buck == 2 && data == 0x40)
|| (chip->pdata->num_buck == 1 && data == 0x00)) {
if (data == 0)
chip->num_regulator = 1;
else
chip->num_regulator = 2;
} else {
if (chip->pdata->num_buck == 1 && data == 0x00)
chip->num_regulator = 1;
else if (chip->pdata->num_buck == 2 && data != 0x00)
chip->num_regulator = 2;
else {
dev_err(chip->dev, "Configuration is mismatched\n");
return -EINVAL;
}
......@@ -438,6 +451,9 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
case DA9213_DEVICE_ID:
chip->chip_id = DA9213;
break;
case DA9215_DEVICE_ID:
chip->chip_id = DA9215;
break;
default:
dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data);
return -ENODEV;
......@@ -478,6 +494,7 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
static const struct i2c_device_id da9211_i2c_id[] = {
{"da9211", DA9211},
{"da9213", DA9213},
{"da9215", DA9215},
{},
};
MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
......@@ -486,6 +503,7 @@ MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
static const struct of_device_id da9211_dt_ids[] = {
{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[2] },
{},
};
MODULE_DEVICE_TABLE(of, da9211_dt_ids);
......@@ -504,5 +522,5 @@ static struct i2c_driver da9211_regulator_driver = {
module_i2c_driver(da9211_regulator_driver);
MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213/DA9215");
MODULE_LICENSE("GPL");
/*
* da9211-regulator.h - Regulator definitions for DA9211/DA9213
* Copyright (C) 2014 Dialog Semiconductor Ltd.
* da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215
* Copyright (C) 2015 Dialog Semiconductor Ltd.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __DA9211_REGISTERS_H__
......
/*
* da9211.h - Regulator device driver for DA9211/DA9213
* Copyright (C) 2014 Dialog Semiconductor Ltd.
* da9211.h - Regulator device driver for DA9211/DA9213/DA9215
* Copyright (C) 2015 Dialog Semiconductor Ltd.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __LINUX_REGULATOR_DA9211_H
......@@ -23,6 +23,7 @@
enum da9211_chip_id {
DA9211,
DA9213,
DA9215,
};
struct da9211_pdata {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment