V4L/DVB (7393): tda827x: fixed support of tuners with LNA

Tuner refactoring broke support of tuners with LNA configurations 1 and 2
for both, analog TV and DVB-T.
Additionally, this patch initializes the saa713x gpios defined by the gpiomask
at driver init to avoid undefined stated at dvb.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/frontends/tda1004x.h

@@ -94,7 +94,6 @@ struct tda1004x_config
 
 	/* slave address and configuration of the tuner */
 	u8 tuner_address;
-	u8 tuner_config;
 	u8 antenna_switch;
 
 	/* if the board uses another I2c Bridge (tda8290), its address */

drivers/media/dvb/frontends/tda827x.c

@@ -142,7 +142,7 @@ static int tda827xo_set_params(struct dvb_frontend *fe,
 	int i, tuner_freq, if_freq;
 	u32 N;
 
-	dprintk("%s:\n", __FUNCTION__);
+	dprintk("%s:\n", __func__);
 	switch (params->u.ofdm.bandwidth) {
 	case BANDWIDTH_6_MHZ:
 		if_freq = 4000000;
@@ -186,7 +186,7 @@ static int tda827xo_set_params(struct dvb_frontend *fe,
 		fe->ops.i2c_gate_ctrl(fe, 1);
 	if (i2c_transfer(priv->i2c_adap, &msg, 1) != 1) {
 		printk("%s: could not write to tuner at addr: 0x%02x\n",
-		       __FUNCTION__, priv->i2c_addr << 1);
+		       __func__, priv->i2c_addr << 1);
 		return -EIO;
 	}
 	msleep(500);
@@ -212,7 +212,7 @@ static int tda827xo_sleep(struct dvb_frontend *fe)
 	struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
 			       .buf = buf, .len = sizeof(buf) };
 
-	dprintk("%s:\n", __FUNCTION__);
+	dprintk("%s:\n", __func__);
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 	i2c_transfer(priv->i2c_adap, &msg, 1);
@@ -389,6 +389,79 @@ static struct tda827xa_data tda827xa_analog[] = {
 	{ .lomax =         0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}
 };
 
+static int tda827xa_sleep(struct dvb_frontend *fe)
+{
+	struct tda827x_priv *priv = fe->tuner_priv;
+	static u8 buf[] = { 0x30, 0x90 };
+	struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
+			       .buf = buf, .len = sizeof(buf) };
+
+	dprintk("%s:\n", __func__);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	i2c_transfer(priv->i2c_adap, &msg, 1);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	if (priv->cfg && priv->cfg->sleep)
+		priv->cfg->sleep(fe);
+
+	return 0;
+}
+
+static void tda827xa_lna_gain(struct dvb_frontend *fe, int high,
+			      struct analog_parameters *params)
+{
+	struct tda827x_priv *priv = fe->tuner_priv;
+	unsigned char buf[] = {0x22, 0x01};
+	int arg;
+	int gp_func;
+	struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0,
+			       .buf = buf, .len = sizeof(buf) };
+
+	if (NULL == priv->cfg) {
+		dprintk("tda827x_config not defined, cannot set LNA gain!\n");
+		return;
+	}
+	if (priv->cfg->config) {
+		if (high)
+			dprintk("setting LNA to high gain\n");
+		else
+			dprintk("setting LNA to low gain\n");
+	}
+	switch (priv->cfg->config) {
+	case 0: /* no LNA */
+		break;
+	case 1: /* switch is GPIO 0 of tda8290 */
+	case 2:
+		if (params == NULL) {
+			gp_func = 0;
+			arg  = 0;
+		} else {
+			/* turn Vsync on */
+			gp_func = 1;
+			if (params->std & V4L2_STD_MN)
+				arg = 1;
+			else
+				arg = 0;
+		}
+		if (priv->cfg->tuner_callback)
+			priv->cfg->tuner_callback(priv->i2c_adap->algo_data,
+								gp_func, arg);
+		buf[1] = high ? 0 : 1;
+		if (priv->cfg->config == 2)
+			buf[1] = high ? 1 : 0;
+		i2c_transfer(priv->i2c_adap, &msg, 1);
+		break;
+	case 3: /* switch with GPIO of saa713x */
+		if (priv->cfg->tuner_callback)
+			priv->cfg->tuner_callback(priv->i2c_adap->algo_data, 0, high);
+		break;
+	}
+}
+
 static int tda827xa_set_params(struct dvb_frontend *fe,
 			       struct dvb_frontend_parameters *params)
 {
@@ -401,9 +474,9 @@ static int tda827xa_set_params(struct dvb_frontend *fe,
 	int i, tuner_freq, if_freq;
 	u32 N;
 
-	dprintk("%s:\n", __FUNCTION__);
-	if (priv->cfg && priv->cfg->lna_gain)
-		priv->cfg->lna_gain(fe, 1);
+	dprintk("%s:\n", __func__);
+
+	tda827xa_lna_gain(fe, 1, NULL);
 	msleep(20);
 
 	switch (params->u.ofdm.bandwidth) {
@@ -444,7 +517,7 @@ static int tda827xa_set_params(struct dvb_frontend *fe,
 		fe->ops.i2c_gate_ctrl(fe, 1);
 	if (i2c_transfer(priv->i2c_adap, &msg, 1) != 1) {
 		printk("%s: could not write to tuner at addr: 0x%02x\n",
-		       __FUNCTION__, priv->i2c_addr << 1);
+		       __func__, priv->i2c_addr << 1);
 		return -EIO;
 	}
 	buf[0] = 0x90;
@@ -474,8 +547,7 @@ static int tda827xa_set_params(struct dvb_frontend *fe,
 	buf[1] >>= 4;
 	dprintk("tda8275a AGC2 gain is: %d\n", buf[1]);
 	if ((buf[1]) < 2) {
-		if (priv->cfg && priv->cfg->lna_gain)
-			priv->cfg->lna_gain(fe, 0);
+		tda827xa_lna_gain(fe, 0, NULL);
 		buf[0] = 0x60;
 		buf[1] = 0x0c;
 		if (fe->ops.i2c_gate_ctrl)
@@ -523,73 +595,6 @@ static int tda827xa_set_params(struct dvb_frontend *fe,
 	return 0;
 }
 
-static int tda827xa_sleep(struct dvb_frontend *fe)
-{
-	struct tda827x_priv *priv = fe->tuner_priv;
-	static u8 buf[] = { 0x30, 0x90 };
-	struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
-			       .buf = buf, .len = sizeof(buf) };
-
-	dprintk("%s:\n", __FUNCTION__);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-
-	i2c_transfer(priv->i2c_adap, &msg, 1);
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 0);
-
-	if (priv->cfg && priv->cfg->sleep)
-		priv->cfg->sleep(fe);
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-static void tda827xa_lna_gain(struct dvb_frontend *fe, int high,
-			      struct analog_parameters *params)
-{
-	struct tda827x_priv *priv = fe->tuner_priv;
-	unsigned char buf[] = {0x22, 0x01};
-	int arg;
-	struct i2c_msg msg = { .addr = priv->i2c_addr, .flags = 0,
-			       .buf = buf, .len = sizeof(buf) };
-
-	if (NULL == priv->cfg) {
-		dprintk("tda827x_config not defined, cannot set LNA gain!\n");
-		return;
-	}
-
-	if (priv->cfg->config) {
-		if (high)
-			dprintk("setting LNA to high gain\n");
-		else
-			dprintk("setting LNA to low gain\n");
-	}
-	switch (*priv->cfg->config) {
-	case 0: /* no LNA */
-		break;
-	case 1: /* switch is GPIO 0 of tda8290 */
-	case 2:
-		/* turn Vsync on */
-		if (params->std & V4L2_STD_MN)
-			arg = 1;
-		else
-			arg = 0;
-		if (priv->cfg->tuner_callback)
-			priv->cfg->tuner_callback(priv, 1, arg);
-		buf[1] = high ? 0 : 1;
-		if (*priv->cfg->config == 2)
-			buf[1] = high ? 1 : 0;
-		i2c_transfer(priv->i2c_adap, &msg, 1);
-		break;
-	case 3: /* switch with GPIO of saa713x */
-		if (priv->cfg->tuner_callback)
-			priv->cfg->tuner_callback(priv, 0, high);
-		break;
-	}
-}
 
 static int tda827xa_set_analog_params(struct dvb_frontend *fe,
 				      struct analog_parameters *params)
@@ -724,7 +729,7 @@ static int tda827x_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 static int tda827x_init(struct dvb_frontend *fe)
 {
 	struct tda827x_priv *priv = fe->tuner_priv;
-	dprintk("%s:\n", __FUNCTION__);
+	dprintk("%s:\n", __func__);
 	if (priv->cfg && priv->cfg->init)
 		priv->cfg->init(fe);
 
@@ -792,7 +797,7 @@ static int tda827x_probe_version(struct dvb_frontend *fe)
 		fe->ops.i2c_gate_ctrl(fe, 1);
 	if (i2c_transfer(priv->i2c_adap, &msg, 1) != 1) {
 		printk("%s: could not read from tuner at addr: 0x%02x\n",
-		       __FUNCTION__, msg.addr << 1);
+		       __func__, msg.addr << 1);
 		return -EIO;
 	}
 	if ((data & 0x3c) == 0) {
@@ -816,7 +821,7 @@ struct dvb_frontend *tda827x_attach(struct dvb_frontend *fe, int addr,
 {
 	struct tda827x_priv *priv = NULL;
 
-	dprintk("%s:\n", __FUNCTION__);
+	dprintk("%s:\n", __func__);
 	priv = kzalloc(sizeof(struct tda827x_priv), GFP_KERNEL);
 	if (priv == NULL)
 		return NULL;

drivers/media/dvb/frontends/tda827x.h

@@ -30,12 +30,12 @@
 struct tda827x_config
 {
 	/* saa7134 - provided callbacks */
-	void (*lna_gain) (struct dvb_frontend *fe, int high);
 	int (*init) (struct dvb_frontend *fe);
 	int (*sleep) (struct dvb_frontend *fe);
 
 	/* interface to tda829x driver */
-	unsigned int *config;
+	unsigned int config;
+	int 	     switch_addr;
 	int (*tuner_callback) (void *dev, int command, int arg);
 
 	void (*agcf)(struct dvb_frontend *fe);

drivers/media/video/saa7134/saa7134-cards.c

@@ -5260,13 +5260,14 @@ int saa7134_tuner_callback(void *priv, int command, int arg)
 {
 	struct i2c_algo_bit_data *i2c_algo = priv;
 	struct saa7134_dev *dev = i2c_algo->data;
-
+	if (dev != NULL) {
 		switch (dev->tuner_type) {
 		case TUNER_PHILIPS_TDA8290:
 			return saa7134_tda8290_callback(dev, command, arg);
 		case TUNER_XC2028:
 			return saa7134_xc2028_callback(dev, command, arg);
 		}
+	}
 	return -EINVAL;
 }
 EXPORT_SYMBOL(saa7134_tuner_callback);

drivers/media/video/saa7134/saa7134-core.c

@@ -864,6 +864,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	struct saa7134_dev *dev;
 	struct saa7134_mpeg_ops *mops;
 	int err;
+	int mask;
 
 	dev = kzalloc(sizeof(*dev),GFP_KERNEL);
 	if (NULL == dev)
@@ -1061,6 +1062,11 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (TUNER_ABSENT != dev->tuner_type)
 		saa7134_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
 
+	if (card(dev).gpiomask != 0) {
+		mask = card(dev).gpiomask;
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   mask, mask);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, mask, 0);
+	}
 	return 0;
 
  fail4:

drivers/media/video/saa7134/saa7134-dvb.c

@@ -439,8 +439,6 @@ static struct tda1004x_config philips_europa_config = {
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
-/* ------------------------------------------------------------------ */
-
 static struct tda1004x_config medion_cardbus = {
 	.demod_address = 0x08,
 	.invert        = 1,
@@ -456,47 +454,6 @@ static struct tda1004x_config medion_cardbus = {
  * tda 1004x based cards with philips silicon tuner
  */
 
-static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high)
-{
-	struct saa7134_dev *dev = fe->dvb->priv;
-	struct tda1004x_state *state = fe->demodulator_priv;
-	u8 addr = state->config->i2c_gate;
-	u8 config = state->config->tuner_config;
-	u8 GP00_CF[] = {0x20, 0x01};
-	u8 GP00_LEV[] = {0x22, 0x00};
-
-	struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = GP00_CF, .len = 2};
-	if (config) {
-		if (high) {
-			dprintk("setting LNA to high gain\n");
-		} else {
-			dprintk("setting LNA to low gain\n");
-		}
-	}
-	switch (config) {
-	case 0: /* no LNA */
-		break;
-	case 1: /* switch is GPIO 0 of tda8290 */
-	case 2:
-		/* turn Vsync off */
-		saa7134_set_gpio(dev, 22, 0);
-		GP00_LEV[1] = high ? 0 : 1;
-		if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
-			wprintk("could not access tda8290 at addr: 0x%02x\n",
-				addr << 1);
-			return;
-		}
-		msg.buf = GP00_LEV;
-		if (config == 2)
-			GP00_LEV[1] = high ? 1 : 0;
-		i2c_transfer(&dev->i2c_adap, &msg, 1);
-		break;
-	case 3: /* switch with GPIO of saa713x */
-		saa7134_set_gpio(dev, 22, high);
-		break;
-	}
-}
-
 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
 {
 	struct tda1004x_state *state = fe->demodulator_priv;
@@ -519,8 +476,6 @@ static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
 	return 0;
 }
 
-/* ------------------------------------------------------------------ */
-
 static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
 {
 	struct saa7134_dev *dev = fe->dvb->priv;
@@ -555,28 +510,57 @@ static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
 	return 0;
 }
 
-static struct tda827x_config tda827x_cfg = {
-	.lna_gain = philips_tda827x_lna_gain,
-	.init = philips_tda827x_tuner_init,
-	.sleep = philips_tda827x_tuner_sleep
-};
-
-static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *tda_conf)
+static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf,
+							  struct tda827x_config *tuner_conf)
 {
-	dev->dvb.frontend = dvb_attach(tda10046_attach, tda_conf, &dev->i2c_adap);
+	dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
 	if (dev->dvb.frontend) {
-		if (tda_conf->i2c_gate)
+		if (cdec_conf->i2c_gate)
 			dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
-		if (dvb_attach(tda827x_attach, dev->dvb.frontend, tda_conf->tuner_address,
-						&dev->i2c_adap,&tda827x_cfg) == NULL) {
+		if (dvb_attach(tda827x_attach, dev->dvb.frontend, cdec_conf->tuner_address,
+							&dev->i2c_adap, tuner_conf) == NULL) {
 			wprintk("no tda827x tuner found at addr: %02x\n",
-				tda_conf->tuner_address);
+				cdec_conf->tuner_address);
 		}
 	}
 }
 
 /* ------------------------------------------------------------------ */
 
+static struct tda827x_config tda827x_cfg_0 = {
+	.tuner_callback = saa7134_tuner_callback,
+	.init = philips_tda827x_tuner_init,
+	.sleep = philips_tda827x_tuner_sleep,
+	.config = 0,
+	.switch_addr = 0
+};
+
+static struct tda827x_config tda827x_cfg_1 = {
+	.tuner_callback = saa7134_tuner_callback,
+	.init = philips_tda827x_tuner_init,
+	.sleep = philips_tda827x_tuner_sleep,
+	.config = 1,
+	.switch_addr = 0x4b
+};
+
+static struct tda827x_config tda827x_cfg_2 = {
+	.tuner_callback = saa7134_tuner_callback,
+	.init = philips_tda827x_tuner_init,
+	.sleep = philips_tda827x_tuner_sleep,
+	.config = 2,
+	.switch_addr = 0x4b
+};
+
+static struct tda827x_config tda827x_cfg_2_sw42 = {
+	.tuner_callback = saa7134_tuner_callback,
+	.init = philips_tda827x_tuner_init,
+	.sleep = philips_tda827x_tuner_sleep,
+	.config = 2,
+	.switch_addr = 0x42
+};
+
+/* ------------------------------------------------------------------ */
+
 static struct tda1004x_config tda827x_lifeview_config = {
 	.demod_address = 0x08,
 	.invert        = 1,
@@ -599,7 +583,6 @@ static struct tda1004x_config philips_tiger_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 0,
 	.antenna_switch= 1,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -614,7 +597,6 @@ static struct tda1004x_config cinergy_ht_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 0,
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
@@ -628,7 +610,6 @@ static struct tda1004x_config cinergy_ht_pci_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x60,
-	.tuner_config  = 0,
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
@@ -642,7 +623,6 @@ static struct tda1004x_config philips_tiger_s_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 2,
 	.antenna_switch= 1,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -657,7 +637,6 @@ static struct tda1004x_config pinnacle_pctv_310i_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 1,
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
@@ -671,7 +650,6 @@ static struct tda1004x_config hauppauge_hvr_1110_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 1,
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
@@ -685,7 +663,6 @@ static struct tda1004x_config asus_p7131_dual_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 0,
 	.antenna_switch= 2,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -724,7 +701,6 @@ static struct tda1004x_config md8800_dvbt_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x60,
-	.tuner_config  = 0,
 	.request_firmware = philips_tda1004x_request_firmware
 };
 
@@ -738,7 +714,6 @@ static struct tda1004x_config asus_p7131_4871_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 2,
 	.antenna_switch= 2,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -753,7 +728,6 @@ static struct tda1004x_config asus_p7131_hybrid_lna_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 2,
 	.antenna_switch= 2,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -768,7 +742,6 @@ static struct tda1004x_config kworld_dvb_t_210_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x61,
-	.tuner_config  = 2,
 	.antenna_switch= 1,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -783,7 +756,6 @@ static struct tda1004x_config avermedia_super_007_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x4b,
 	.tuner_address = 0x60,
-	.tuner_config  = 0,
 	.antenna_switch= 1,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -798,7 +770,6 @@ static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
 	.if_freq       = TDA10046_FREQ_045,
 	.i2c_gate      = 0x42,
 	.tuner_address = 0x61,
-	.tuner_config  = 2,
 	.antenna_switch = 1,
 	.request_firmware = philips_tda1004x_request_firmware
 };
@@ -826,9 +797,10 @@ static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
 }
 
 static struct tda827x_config ads_duo_cfg = {
-	.lna_gain = philips_tda827x_lna_gain,
+	.tuner_callback = saa7134_tuner_callback,
 	.init = ads_duo_tuner_init,
-	.sleep = ads_duo_tuner_sleep
+	.sleep = ads_duo_tuner_sleep,
+	.config = 0
 };
 
 static struct tda1004x_config ads_tech_duo_config = {
@@ -981,7 +953,7 @@ static int dvb_init(struct saa7134_dev *dev)
 		break;
 	case SAA7134_BOARD_FLYDVBTDUO:
 	case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
-		configure_tda827x_fe(dev, &tda827x_lifeview_config);
+		configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_PHILIPS_EUROPA:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_300:
@@ -1006,26 +978,26 @@ static int dvb_init(struct saa7134_dev *dev)
 		}
 		break;
 	case SAA7134_BOARD_KWORLD_DVBT_210:
-		configure_tda827x_fe(dev, &kworld_dvb_t_210_config);
+		configure_tda827x_fe(dev, &kworld_dvb_t_210_config, &tda827x_cfg_2);
 		break;
 	case SAA7134_BOARD_PHILIPS_TIGER:
-		configure_tda827x_fe(dev, &philips_tiger_config);
+		configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_PINNACLE_PCTV_310i:
-		configure_tda827x_fe(dev, &pinnacle_pctv_310i_config);
+		configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, &tda827x_cfg_1);
 		break;
 	case SAA7134_BOARD_HAUPPAUGE_HVR1110:
-		configure_tda827x_fe(dev, &hauppauge_hvr_1110_config);
+		configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, &tda827x_cfg_1);
 		break;
 	case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
-		configure_tda827x_fe(dev, &asus_p7131_dual_config);
+		configure_tda827x_fe(dev, &asus_p7131_dual_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_FLYDVBT_LR301:
-		configure_tda827x_fe(dev, &tda827x_lifeview_config);
+		configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_FLYDVB_TRIO:
 		if(! use_frontend) {	/* terrestrial */
-			configure_tda827x_fe(dev, &lifeview_trio_config);
+			configure_tda827x_fe(dev, &lifeview_trio_config, &tda827x_cfg_0);
 		} else {  		/* satellite */
 			dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
 			if (dev->dvb.frontend) {
@@ -1047,19 +1019,19 @@ static int dvb_init(struct saa7134_dev *dev)
 					       &dev->i2c_adap);
 		if (dev->dvb.frontend) {
 			if (dvb_attach(tda827x_attach,dev->dvb.frontend,
-				   ads_tech_duo_config.tuner_address,
-				   &dev->i2c_adap,&ads_duo_cfg) == NULL) {
+				   ads_tech_duo_config.tuner_address, &dev->i2c_adap,
+								&ads_duo_cfg) == NULL) {
 				wprintk("no tda827x tuner found at addr: %02x\n",
 					ads_tech_duo_config.tuner_address);
 			}
 		}
 		break;
 	case SAA7134_BOARD_TEVION_DVBT_220RF:
-		configure_tda827x_fe(dev, &tevion_dvbt220rf_config);
+		configure_tda827x_fe(dev, &tevion_dvbt220rf_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_MEDION_MD8800_QUADRO:
 		if (!use_frontend) {     /* terrestrial */
-			configure_tda827x_fe(dev, &md8800_dvbt_config);
+			configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
 		} else {        /* satellite */
 			dev->dvb.frontend = dvb_attach(tda10086_attach,
 							&flydvbs, &dev->i2c_adap);
@@ -1148,25 +1120,25 @@ static int dvb_init(struct saa7134_dev *dev)
 		}
 		break;
 	case SAA7134_BOARD_CINERGY_HT_PCMCIA:
-		configure_tda827x_fe(dev, &cinergy_ht_config);
+		configure_tda827x_fe(dev, &cinergy_ht_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_CINERGY_HT_PCI:
-		configure_tda827x_fe(dev, &cinergy_ht_pci_config);
+		configure_tda827x_fe(dev, &cinergy_ht_pci_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_PHILIPS_TIGER_S:
-		configure_tda827x_fe(dev, &philips_tiger_s_config);
+		configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
 		break;
 	case SAA7134_BOARD_ASUS_P7131_4871:
-		configure_tda827x_fe(dev, &asus_p7131_4871_config);
+		configure_tda827x_fe(dev, &asus_p7131_4871_config, &tda827x_cfg_2);
 		break;
 	case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
-		configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config);
+		configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, &tda827x_cfg_2);
 		break;
 	case SAA7134_BOARD_AVERMEDIA_SUPER_007:
-		configure_tda827x_fe(dev, &avermedia_super_007_config);
+		configure_tda827x_fe(dev, &avermedia_super_007_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
-		configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config);
+		configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, &tda827x_cfg_2_sw42);
 		break;
 	case SAA7134_BOARD_PHILIPS_SNAKE:
 		dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
@@ -1181,10 +1153,10 @@ static int dvb_init(struct saa7134_dev *dev)
 		}
 		break;
 	case SAA7134_BOARD_CREATIX_CTX953:
-		configure_tda827x_fe(dev, &md8800_dvbt_config);
+		configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
 		break;
 	case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
-		configure_tda827x_fe(dev, &philips_tiger_s_config);
+		configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
 		break;
 	case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
 		dev->dvb.frontend = dvb_attach(mt352_attach,

drivers/media/video/saa7134/saa7134-video.c

@@ -626,13 +626,8 @@ void saa7134_set_tvnorm_hw(struct saa7134_dev *dev)
 {
 	saa7134_set_decoder(dev);
 
-	if (card_in(dev, dev->ctl_input).tv) {
-		if ((card(dev).tuner_type == TUNER_PHILIPS_TDA8290)
-				&& ((card(dev).tuner_config == 1)
-				||  (card(dev).tuner_config == 2)))
-			saa7134_set_gpio(dev, 22, 5);
+	if (card_in(dev, dev->ctl_input).tv)
 		saa7134_i2c_call_clients(dev, VIDIOC_S_STD, &dev->tvnorm->id);
-	}
 }
 
 static void set_h_prescale(struct saa7134_dev *dev, int task, int prescale)

drivers/media/video/tda8290.c

@@ -172,7 +172,7 @@ static void tda8290_set_params(struct dvb_frontend *fe,
 	set_audio(fe, params);
 
 	if (priv->cfg.config)
-		tuner_dbg("tda827xa config is 0x%02x\n", *priv->cfg.config);
+		tuner_dbg("tda827xa config is 0x%02x\n", priv->cfg.config);
 	tuner_i2c_xfer_send(&priv->i2c_props, easy_mode, 2);
 	tuner_i2c_xfer_send(&priv->i2c_props, agc_out_on, 2);
 	tuner_i2c_xfer_send(&priv->i2c_props, soft_reset, 2);
@@ -442,8 +442,7 @@ static void tda8290_init_if(struct dvb_frontend *fe)
 	unsigned char set_GP00_CF[] = { 0x20, 0x01 };
 	unsigned char set_GP01_CF[] = { 0x20, 0x0B };
 
-	if ((priv->cfg.config) &&
-	    ((*priv->cfg.config == 1) || (*priv->cfg.config == 2)))
+	if ((priv->cfg.config == 1) || (priv->cfg.config == 2))
 		tuner_i2c_xfer_send(&priv->i2c_props, set_GP00_CF, 2);
 	else
 		tuner_i2c_xfer_send(&priv->i2c_props, set_GP01_CF, 2);
@@ -588,8 +587,8 @@ static int tda829x_find_tuner(struct dvb_frontend *fe)
 		else
 			priv->ver |= TDA8275A;
 
-		tda827x_attach(fe, priv->tda827x_addr,
-			       priv->i2c_props.adap, &priv->cfg);
+		tda827x_attach(fe, priv->tda827x_addr, priv->i2c_props.adap, &priv->cfg);
+		priv->cfg.switch_addr = priv->i2c_props.addr;
 	}
 	if (fe->ops.tuner_ops.init)
 		fe->ops.tuner_ops.init(fe);

drivers/media/video/tda8290.h

@@ -21,7 +21,7 @@
 #include "dvb_frontend.h"
 
 struct tda829x_config {
-	unsigned int *lna_cfg;
+	unsigned int lna_cfg;
 	int (*tuner_callback) (void *dev, int command, int arg);
 
 	unsigned int probe_tuner:1;

drivers/media/video/tuner-core.c

@@ -320,7 +320,7 @@ static void tuner_i2c_address_check(struct tuner *t)
 static void attach_tda829x(struct tuner *t)
 {
 	struct tda829x_config cfg = {
-		.lna_cfg        = &t->config,
+		.lna_cfg        = t->config,
 		.tuner_callback = t->tuner_callback,
 	};
 	tda829x_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg);