V4L/DVB: ivtv: Add initial entry for Sony VAIO Giga Pocket (Kikyou) cards

This is a slightly modified version of Eric Anderson's original patch
for the Sony Giga Pocket board.  It has been updated to apply to the
latest ivtv driver version by Hans Verkuil <hverkuil@xs4all.nl> and
Andy Walls <awalls@radix.net>.  Also Andy Walls modified the patch to
use a new Sony BTF-Pnx01Z tuner entry based on Eric Anderson's experimental
findings for the bandswitch.

>From Eric Anderson's original email:

1. The tuner on the card doesn't seem to match any standard
ones. I modified an existing tuner entry. Ideally a new tuner
entry should be created. (The only difference from the one I
modified is that the low-to-mid range frequency cut-off is
slightly different, as are the bit config settings.)

2. It wasn't obvious how to choose a second audio input other
than using "radio" as an option. Basically there's two GPIO
audio inputs. Using radio allowed me to avoid major restructuring
to the code. (perhaps other cards don't have this often...)

3. It's not clear that there's a mute setting that works. Not
sure why.

4. I haven't had a chance to test the two Svideo inputs. I set
them to COMPOSITE1 and SVIDEO2, but I'm not sure those are the
correct settings. The standard composite video inputs seem to work.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/ivtv/ivtv-cards.c

@@ -1210,6 +1210,60 @@ static const struct ivtv_card ivtv_card_buffalo = {
 	.i2c = &ivtv_i2c_std,
 };
 
+/* ------------------------------------------------------------------------- */
+/* Sony Kikyou */
+
+static const struct ivtv_card_pci_info ivtv_pci_kikyou[] = {
+	{ PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_SONY, 0x813d },
+	{ 0, 0, 0 }
+};
+
+static const struct ivtv_card ivtv_card_kikyou = {
+	.type = IVTV_CARD_KIKYOU,
+	.name = "Sony VAIO Giga Pocket (ENX Kikyou)",
+	.v4l2_capabilities = IVTV_CAP_ENCODER,
+	.hw_video = IVTV_HW_SAA7115,
+	.hw_audio = IVTV_HW_GPIO,
+	.hw_audio_ctrl = IVTV_HW_GPIO,
+	.hw_all = IVTV_HW_GPIO | IVTV_HW_SAA7115 | IVTV_HW_TUNER,
+	.video_inputs = {
+	{ IVTV_CARD_INPUT_VID_TUNER,  0, IVTV_SAA71XX_COMPOSITE5 },
+	{ IVTV_CARD_INPUT_COMPOSITE1, 1, IVTV_SAA71XX_COMPOSITE4 }, /* rear */
+	{ IVTV_CARD_INPUT_COMPOSITE2, 2, IVTV_SAA71XX_COMPOSITE1 }, /* front */
+	{ IVTV_CARD_INPUT_SVIDEO1,    1, IVTV_SAA71XX_SVIDEO1 },
+	{ IVTV_CARD_INPUT_SVIDEO2,    2, IVTV_SAA71XX_SVIDEO2 },
+	},
+	.audio_inputs = {
+	     { IVTV_CARD_INPUT_AUD_TUNER,  IVTV_GPIO_TUNER },
+	     { IVTV_CARD_INPUT_LINE_IN1,   IVTV_GPIO_LINE_IN },
+	     /* IVTV_GPIO_RADIO?? pretend to have "radio" for 2nd audio GPIO. */
+	     { IVTV_CARD_INPUT_LINE_IN2,   2 },
+	},
+	/*
+	 * Sony windows software seems to set 0x200 when unmuting.
+	 * Does it do anything?  Not clear what 0x100 does either.
+	 */
+	.gpio_init = { .direction = 0x0381, .initial_value = 0x0320 },
+	.gpio_audio_input = { .mask   = 0x0060,
+			      .tuner  = 0x0000,
+			      .linein = 0x0060,
+			      .radio  = 0x0020 },
+	.gpio_audio_mute  = { .mask = 0x0000,
+			      .mute = 0x0000 }, /* 0x200? Disable for now. */
+	.gpio_audio_mode  = { .mask   = 0x0080,
+			      .mono   = 0x0000,
+			      .stereo = 0x0000, /* SAP */
+			      .lang1  = 0x0080,
+			      .lang2  = 0x0000,
+			      .both   = 0x0080 },
+	.tuners = {
+	     { .std = V4L2_STD_ALL, .tuner = TUNER_SONY_BTF_PXN01Z },
+	},
+	.pci_list = ivtv_pci_kikyou,
+	.i2c = &ivtv_i2c_std,
+};
+
+
 static const struct ivtv_card *ivtv_card_list[] = {
 	&ivtv_card_pvr250,
 	&ivtv_card_pvr350,
@@ -1238,6 +1292,7 @@ static const struct ivtv_card *ivtv_card_list[] = {
 	&ivtv_card_aver_m104,
 	&ivtv_card_buffalo,
 	&ivtv_card_aver_ultra1500mce,
+	&ivtv_card_kikyou,
 
 	/* Variations of standard cards but with the same PCI IDs.
 	   These cards must come last in this list. */

drivers/media/video/ivtv/ivtv-cards.h

@@ -51,7 +51,8 @@
 #define IVTV_CARD_AVER_M104          24 /* AverMedia M104 miniPCI card */
 #define IVTV_CARD_BUFFALO_MV5L       25 /* Buffalo PC-MV5L/PCI card */
 #define IVTV_CARD_AVER_ULTRA1500MCE  26 /* AVerMedia UltraTV 1500 MCE */
-#define IVTV_CARD_LAST 		     26
+#define IVTV_CARD_KIKYOU             27 /* Sony VAIO Giga Pocket (ENX Kikyou) */
+#define IVTV_CARD_LAST 		     27
 
 /* Variants of existing cards but with the same PCI IDs. The driver
    detects these based on other device information.
@@ -86,6 +87,7 @@
 #define IVTV_PCI_ID_MELCO 		0x1154
 #define IVTV_PCI_ID_GOTVIEW1		0xffac
 #define IVTV_PCI_ID_GOTVIEW2 		0xffad
+#define IVTV_PCI_ID_SONY 		0x104d
 
 /* hardware flags, no gaps allowed */
 #define IVTV_HW_CX25840			(1 << 0)

drivers/media/video/ivtv/ivtv-driver.c

@@ -193,6 +193,7 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t25 = AverMedia M104 (not yet working)\n"
 		 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
 		 "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
+		 "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");