Revert "drm/panel-simple: Add Samsung ATNA33XC20"

This reverts commit 4bfe6c8f.

This panel's power sequencing really can't be handled properly by
panel-simple because of the special sequencing needed for the EL_ON3
GPIO. The only way it was sorta working in the past was by trying to
jam that signal into the "enable-gpio", but that really wasn't a good
fit. We'll add a custom panel driver for this panel to do it right.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730084534.v2.4.Id9f076ec5f35633f8ce931051af268a04c45c075@changeid

drivers/gpu/drm/panel/panel-simple.c

@@ -3681,36 +3681,6 @@ static const struct panel_desc rocktech_rk101ii01d_ct = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
-static const struct drm_display_mode samsung_atna33xc20_mode = {
-	.clock = 138770,
-	.hdisplay = 1920,
-	.hsync_start = 1920 + 48,
-	.hsync_end = 1920 + 48 + 32,
-	.htotal = 1920 + 48 + 32 + 80,
-	.vdisplay = 1080,
-	.vsync_start = 1080 + 8,
-	.vsync_end = 1080 + 8 + 8,
-	.vtotal = 1080 + 8 + 8 + 16,
-	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
-};
-
-static const struct panel_desc samsung_atna33xc20 = {
-	.modes = &samsung_atna33xc20_mode,
-	.num_modes = 1,
-	.bpc = 10,
-	.size = {
-		.width = 294,
-		.height = 165,
-	},
-	.delay = {
-		.disable_to_power_off = 200,
-		.power_to_enable = 400,
-		.hpd_absent_delay = 200,
-		.unprepare = 500,
-	},
-	.connector_type = DRM_MODE_CONNECTOR_eDP,
-};
-
 static const struct drm_display_mode samsung_lsn122dl01_c01_mode = {
 	.clock = 271560,
 	.hdisplay = 2560,
@@ -4723,9 +4693,6 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "rocktech,rk101ii01d-ct",
 		.data = &rocktech_rk101ii01d_ct,
-	}, {
-		.compatible = "samsung,atna33xc20",
-		.data = &samsung_atna33xc20,
 	}, {
 		.compatible = "samsung,lsn122dl01-c01",
 		.data = &samsung_lsn122dl01_c01,