Commit 7c7a5304 authored by Jean Delvare's avatar Jean Delvare Committed by Greg Kroah-Hartman

[PATCH] I2C: w83781d: remove non-i2c sensor chips

This patch removes the support for the W83697HF and W83627THF chips from
the w83781d driver. These chips have no I2C/SMBus interface and are
better supported by the Super-I/O-based w83627hf driver. Documentation
was updated to reflect the support drop.
Signed-off-by: default avatarGrant Coady <gcoady@gmail.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent a45cfe2c
......@@ -18,14 +18,6 @@ Supported chips:
Prefix: 'w83627hf'
Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
* Winbond W83627THF
Prefix: 'w83627thf'
Addresses scanned: ISA address 0x290 (8 I/O ports)
Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
* Winbond W83697HF
Prefix: 'w83697hf'
Addresses scanned: ISA 0x290 (8 I/O ports)
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83697hf.pdf
* Asus AS99127F
Prefix: 'as99127f'
Addresses scanned: I2C 0x28 - 0x2f
......@@ -53,9 +45,9 @@ force_subclients=bus,caddr,saddr,saddr
Description
-----------
This driver implements support for the Winbond W83627HF, W83627THF, W83781D,
W83782D, W83783S, W83697HF chips, and the Asus AS99127F chips. We will refer
to them collectively as W8378* chips.
This driver implements support for the Winbond W83781D, W83782D, W83783S,
W83627HF chips, and the Asus AS99127F chips. We will refer to them
collectively as W8378* chips.
There is quite some difference between these chips, but they are similar
enough that it was sensible to put them together in one driver.
......@@ -67,10 +59,8 @@ as99127f 7 3 0 3 0x31 0x12c3 yes no
as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC)
w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
Detection of these chips can sometimes be foiled because they can be in
an internal state that allows no clean access. If you know the address
......
......@@ -28,10 +28,8 @@
as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC)
w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
*/
......@@ -52,7 +50,7 @@ static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf);
SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
......@@ -998,13 +996,6 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
err = -EINVAL;
goto ERROR0;
}
if (!is_isa && kind == w83697hf) {
dev_err(&adapter->dev,
"Cannot force ISA-only chip for I2C address 0x%02x.\n",
address);
err = -EINVAL;
goto ERROR0;
}
if (is_isa)
if (!request_region(address, W83781D_EXTENT,
......@@ -1137,12 +1128,10 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
else if (val1 == 0x40 && vendid == winbond && !is_isa
&& address == 0x2d)
kind = w83783s;
else if ((val1 == 0x21 || val1 == 0x90) && vendid == winbond)
else if (val1 == 0x21 && vendid == winbond)
kind = w83627hf;
else if (val1 == 0x31 && !is_isa && address >= 0x28)
kind = as99127f;
else if (val1 == 0x60 && vendid == winbond && is_isa)
kind = w83697hf;
else {
if (kind == 0)
dev_warn(&new_client->dev, "Ignoring 'force' "
......@@ -1161,14 +1150,9 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
} else if (kind == w83783s) {
client_name = "w83783s";
} else if (kind == w83627hf) {
if (val1 == 0x90)
client_name = "w83627thf";
else
client_name = "w83627hf";
} else if (kind == as99127f) {
client_name = "as99127f";
} else if (kind == w83697hf) {
client_name = "w83697hf";
}
/* Fill in the remaining client fields and put into the global list */
......@@ -1206,7 +1190,7 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
/* Register sysfs hooks */
device_create_file_in(new_client, 0);
if (kind != w83783s && kind != w83697hf)
if (kind != w83783s)
device_create_file_in(new_client, 1);
device_create_file_in(new_client, 2);
device_create_file_in(new_client, 3);
......@@ -1220,23 +1204,18 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
device_create_file_fan(new_client, 1);
device_create_file_fan(new_client, 2);
if (kind != w83697hf)
device_create_file_fan(new_client, 3);
device_create_file_temp(new_client, 1);
device_create_file_temp(new_client, 2);
if (kind != w83783s && kind != w83697hf)
if (kind != w83783s)
device_create_file_temp(new_client, 3);
if (kind != w83697hf)
device_create_file_vid(new_client);
if (kind != w83697hf)
device_create_file_vrm(new_client);
device_create_file_fan_div(new_client, 1);
device_create_file_fan_div(new_client, 2);
if (kind != w83697hf)
device_create_file_fan_div(new_client, 3);
device_create_file_alarms(new_client);
......@@ -1256,7 +1235,7 @@ w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
if (kind != as99127f && kind != w83781d) {
device_create_file_sensor(new_client, 1);
device_create_file_sensor(new_client, 2);
if (kind != w83783s && kind != w83697hf)
if (kind != w83783s)
device_create_file_sensor(new_client, 3);
}
......@@ -1479,7 +1458,7 @@ w83781d_init_client(struct i2c_client *client)
else
data->sens[i - 1] = 2;
}
if ((type == w83783s || type == w83697hf) && (i == 2))
if (type == w83783s && i == 2)
break;
}
}
......@@ -1495,7 +1474,7 @@ w83781d_init_client(struct i2c_client *client)
}
/* Enable temp3 */
if (type != w83783s && type != w83697hf) {
if (type != w83783s) {
tmp = w83781d_read_value(client,
W83781D_REG_TEMP3_CONFIG);
if (tmp & 0x01) {
......@@ -1536,8 +1515,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
dev_dbg(dev, "Starting device update\n");
for (i = 0; i <= 8; i++) {
if ((data->type == w83783s || data->type == w83697hf)
&& (i == 1))
if (data->type == w83783s && i == 1)
continue; /* 783S has no in1 */
data->in[i] =
w83781d_read_value(client, W83781D_REG_IN(i));
......@@ -1545,7 +1523,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
w83781d_read_value(client, W83781D_REG_IN_MIN(i));
data->in_max[i] =
w83781d_read_value(client, W83781D_REG_IN_MAX(i));
if ((data->type != w83782d) && (data->type != w83697hf)
if ((data->type != w83782d)
&& (data->type != w83627hf) && (i == 6))
break;
}
......@@ -1581,7 +1559,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
data->temp_max_hyst_add[0] =
w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
if (data->type != w83783s && data->type != w83697hf) {
if (data->type != w83783s) {
data->temp_add[1] =
w83781d_read_value(client, W83781D_REG_TEMP(3));
data->temp_max_add[1] =
......@@ -1592,25 +1570,17 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
W83781D_REG_TEMP_HYST(3));
}
i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
if (data->type != w83697hf) {
data->vid = i & 0x0f;
data->vid |=
(w83781d_read_value(client, W83781D_REG_CHIPID) &
0x01)
<< 4;
}
data->vid |= (w83781d_read_value(client,
W83781D_REG_CHIPID) & 0x01) << 4;
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = (i >> 6) & 0x03;
if (data->type != w83697hf) {
data->fan_div[2] = (w83781d_read_value(client,
W83781D_REG_PIN)
>> 6) & 0x03;
}
W83781D_REG_PIN) >> 6) & 0x03;
if ((data->type != w83781d) && (data->type != as99127f)) {
i = w83781d_read_value(client, W83781D_REG_VBAT);
data->fan_div[0] |= (i >> 3) & 0x04;
data->fan_div[1] |= (i >> 4) & 0x04;
if (data->type != w83697hf)
data->fan_div[2] |= (i >> 5) & 0x04;
}
data->alarms =
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment