Commit 7cb7f07d authored by Shengjiu Wang's avatar Shengjiu Wang Committed by Mark Brown

ASoC: fsl_sai: Add support for PLL switch at runtime

i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.

The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of sysclk rate.
Signed-off-by: default avatarViorel Suman <viorel.suman@nxp.com>
Signed-off-by: default avatarShengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-5-git-send-email-shengjiu.wang@nxp.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 93f54100
......@@ -19,6 +19,7 @@ config SND_SOC_FSL_SAI
select REGMAP_MMIO
select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
select SND_SOC_GENERIC_DMAENGINE_PCM
select SND_SOC_FSL_UTILS
help
Say Y if you want to add Synchronous Audio Interface (SAI)
support for the Freescale CPUs.
......
......@@ -23,6 +23,7 @@
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include "fsl_sai.h"
#include "fsl_utils.h"
#include "imx-pcm.h"
#define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\
......@@ -220,14 +221,48 @@ static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai,
return 0;
}
static int fsl_sai_set_mclk_rate(struct snd_soc_dai *dai, int clk_id, unsigned int freq)
{
struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
int ret;
fsl_asoc_reparent_pll_clocks(dai->dev, sai->mclk_clk[clk_id],
sai->pll8k_clk, sai->pll11k_clk, freq);
ret = clk_set_rate(sai->mclk_clk[clk_id], freq);
if (ret < 0)
dev_err(dai->dev, "failed to set clock rate (%u): %d\n", freq, ret);
return ret;
}
static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
int ret;
if (dir == SND_SOC_CLOCK_IN)
return 0;
if (freq > 0 && clk_id != FSL_SAI_CLK_BUS) {
if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) {
dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id);
return -EINVAL;
}
if (IS_ERR_OR_NULL(sai->mclk_clk[clk_id])) {
dev_err(cpu_dai->dev, "Unassigned clock: %d\n", clk_id);
return -EINVAL;
}
if (sai->mclk_streams == 0) {
ret = fsl_sai_set_mclk_rate(cpu_dai, clk_id, freq);
if (ret < 0)
return ret;
}
}
ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, true);
if (ret) {
dev_err(cpu_dai->dev, "Cannot set tx sysclk: %d\n", ret);
......@@ -1281,6 +1316,9 @@ static int fsl_sai_probe(struct platform_device *pdev)
else
sai->mclk_clk[0] = sai->bus_clk;
fsl_asoc_get_pll_clocks(&pdev->dev, &sai->pll8k_clk,
&sai->pll11k_clk);
/* read dataline mask for rx and tx*/
ret = fsl_sai_read_dlcfg(sai);
if (ret < 0) {
......
......@@ -273,6 +273,8 @@ struct fsl_sai {
struct regmap *regmap;
struct clk *bus_clk;
struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
struct clk *pll8k_clk;
struct clk *pll11k_clk;
struct resource *res;
bool is_consumer_mode;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment