Commit 7d361cb7 authored by Mark Salter's avatar Mark Salter Committed by David Howells

MN10300: cleanup IRQ affinity setting

The irq_set_affinity handler for the mn10300 cpu pic had some hard-coded IRQs
which were not to be migrated from one cpu to another. This patch cleans those
up by using a combination of IRQF_NOBALANCING and specialized irq chips with
no irq_set_affinity handler. This maintains the previous behavior by using
generic IRQ interfaces rather than hard coding IRQ numbers in the default
irq_set_affinity handler.
Signed-off-by: default avatarMark Salter <msalter@redhat.com>
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
parent c98c406e
......@@ -142,57 +142,11 @@ mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask,
bool force)
{
unsigned long flags;
int err;
flags = arch_local_cli_save();
/* check irq no */
switch (d->irq) {
case TMJCIRQ:
case RESCHEDULE_IPI:
case CALL_FUNC_SINGLE_IPI:
case LOCAL_TIMER_IPI:
case FLUSH_CACHE_IPI:
case CALL_FUNCTION_NMI_IPI:
case DEBUGGER_NMI_IPI:
#ifdef CONFIG_MN10300_TTYSM0
case SC0RXIRQ:
case SC0TXIRQ:
#ifdef CONFIG_MN10300_TTYSM0_TIMER8
case TM8IRQ:
#elif CONFIG_MN10300_TTYSM0_TIMER2
case TM2IRQ:
#endif /* CONFIG_MN10300_TTYSM0_TIMER8 */
#endif /* CONFIG_MN10300_TTYSM0 */
#ifdef CONFIG_MN10300_TTYSM1
case SC1RXIRQ:
case SC1TXIRQ:
#ifdef CONFIG_MN10300_TTYSM1_TIMER12
case TM12IRQ:
#elif defined(CONFIG_MN10300_TTYSM1_TIMER9)
case TM9IRQ:
#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
case TM3IRQ:
#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
#endif /* CONFIG_MN10300_TTYSM1 */
#ifdef CONFIG_MN10300_TTYSM2
case SC2RXIRQ:
case SC2TXIRQ:
case TM10IRQ:
#endif /* CONFIG_MN10300_TTYSM2 */
err = -1;
break;
default:
set_bit(d->irq, irq_affinity_request);
err = 0;
break;
}
arch_local_irq_restore(flags);
return err;
return 0;
}
#endif /* CONFIG_SMP */
......
......@@ -936,15 +936,18 @@ static int mn10300_serial_startup(struct uart_port *_port)
irq_set_chip(port->tm_irq, &mn10300_serial_pic);
if (request_irq(port->rx_irq, mn10300_serial_interrupt,
IRQF_DISABLED, port->rx_name, port) < 0)
IRQF_DISABLED | IRQF_NOBALANCING,
port->rx_name, port) < 0)
goto error;
if (request_irq(port->tx_irq, mn10300_serial_interrupt,
IRQF_DISABLED, port->tx_name, port) < 0)
IRQF_DISABLED | IRQF_NOBALANCING,
port->tx_name, port) < 0)
goto error2;
if (request_irq(port->tm_irq, mn10300_serial_interrupt,
IRQF_DISABLED, port->tm_name, port) < 0)
IRQF_DISABLED | IRQF_NOBALANCING,
port->tm_name, port) < 0)
goto error3;
mn10300_serial_mask_ack(port->tm_irq);
......
......@@ -130,10 +130,12 @@ static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id);
static struct irqaction reschedule_ipi = {
.handler = smp_reschedule_interrupt,
.flags = IRQF_NOBALANCING,
.name = "smp reschedule IPI"
};
static struct irqaction call_function_ipi = {
.handler = smp_call_function_interrupt,
.flags = IRQF_NOBALANCING,
.name = "smp call function IPI"
};
......@@ -141,7 +143,7 @@ static struct irqaction call_function_ipi = {
static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id);
static struct irqaction local_timer_ipi = {
.handler = smp_ipi_timer_interrupt,
.flags = IRQF_DISABLED,
.flags = IRQF_DISABLED | IRQF_NOBALANCING,
.name = "smp local timer IPI"
};
#endif
......@@ -180,6 +182,7 @@ static void init_ipi(void)
#ifdef CONFIG_MN10300_CACHE_ENABLED
/* set up the cache flush IPI */
irq_set_chip(FLUSH_CACHE_IPI, &mn10300_ipi_type);
flags = arch_local_cli_save();
__set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV),
mn10300_low_ipi_handler);
......@@ -189,6 +192,7 @@ static void init_ipi(void)
#endif
/* set up the NMI call function IPI */
irq_set_chip(CALL_FUNCTION_NMI_IPI, &mn10300_ipi_type);
flags = arch_local_cli_save();
GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT;
tmp16 = GxICR(CALL_FUNCTION_NMI_IPI);
......@@ -199,6 +203,10 @@ static void init_ipi(void)
__set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV),
mn10300_low_ipi_handler);
arch_local_irq_restore(flags);
#ifdef CONFIG_KERNEL_DEBUGGER
irq_set_chip(DEBUGGER_NMI_IPI, &mn10300_ipi_type);
#endif
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment