thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
Enable hardware trip points by implementing the set_trips callback. The thermal core will take care of setting the initial trip point window and to update it once the driver reports a TSC has moved outside it. The interrupt structure for this device is a bit odd. There is not a dedicated IRQ for each TSC, instead the interrupts are shared between all TSCs. IRQn is fired if the temp monitored in IRQTEMPn is reached in any of the TSCs, example IRQ3 is fired if temperature in IRQTEMP3 is reached in either TSC0, TSC1 or TSC2. For this reason the usage of interrupts in this driver is an all-on or all-off design. When an interrupt happens all TSCs are checked and all thermal zones are updated. This could be refined to be more fine grained but the thermal core takes care of only updating the thermal zones that have left their trip point window. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Showing
Please register or sign in to comment