Merge branches 'pm-cpufreq' and 'pm-sleep'

* pm-cpufreq:
  cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus)
  cpufreq: cpufreq-dt: disable unsupported OPPs

* pm-sleep:
  PM / Sleep: fix recovery during resuming from hibernation
  PM / Sleep: fix async suspend_late/freeze_late error handling

drivers/base/power/main.c

@@ -1266,6 +1266,8 @@ int dpm_suspend_late(pm_message_t state)
 	}
 	mutex_unlock(&dpm_list_mtx);
 	async_synchronize_full();
+	if (!error)
+		error = async_error;
 	if (error) {
 		suspend_stats.failed_suspend_late++;
 		dpm_save_failed_step(SUSPEND_SUSPEND_LATE);

drivers/cpufreq/cpufreq-dt.c

@@ -187,6 +187,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	struct device *cpu_dev;
 	struct regulator *cpu_reg;
 	struct clk *cpu_clk;
+	unsigned long min_uV = ~0, max_uV = 0;
 	unsigned int transition_latency;
 	int ret;
 
@@ -206,16 +207,10 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	/* OPPs might be populated at runtime, don't check for error here */
 	of_init_opp_table(cpu_dev);
 
-	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
-	if (ret) {
-		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-		goto out_put_node;
-	}
-
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		ret = -ENOMEM;
-		goto out_free_table;
+		goto out_put_node;
 	}
 
 	of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
@@ -224,30 +219,51 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		transition_latency = CPUFREQ_ETERNAL;
 
 	if (!IS_ERR(cpu_reg)) {
-		struct dev_pm_opp *opp;
-		unsigned long min_uV, max_uV;
-		int i;
+		unsigned long opp_freq = 0;
 
 		/*
-		 * OPP is maintained in order of increasing frequency, and
-		 * freq_table initialised from OPP is therefore sorted in the
-		 * same order.
+		 * Disable any OPPs where the connected regulator isn't able to
+		 * provide the specified voltage and record minimum and maximum
+		 * voltage levels.
 		 */
-		for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
-			;
+		while (1) {
+			struct dev_pm_opp *opp;
+			unsigned long opp_uV, tol_uV;
+
 			rcu_read_lock();
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[0].frequency * 1000, true);
-		min_uV = dev_pm_opp_get_voltage(opp);
-		opp = dev_pm_opp_find_freq_exact(cpu_dev,
-				freq_table[i-1].frequency * 1000, true);
-		max_uV = dev_pm_opp_get_voltage(opp);
+			opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
+			if (IS_ERR(opp)) {
+				rcu_read_unlock();
+				break;
+			}
+			opp_uV = dev_pm_opp_get_voltage(opp);
 			rcu_read_unlock();
+
+			tol_uV = opp_uV * priv->voltage_tolerance / 100;
+			if (regulator_is_supported_voltage(cpu_reg, opp_uV,
+							   opp_uV + tol_uV)) {
+				if (opp_uV < min_uV)
+					min_uV = opp_uV;
+				if (opp_uV > max_uV)
+					max_uV = opp_uV;
+			} else {
+				dev_pm_opp_disable(cpu_dev, opp_freq);
+			}
+
+			opp_freq++;
+		}
+
 		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
 		if (ret > 0)
 			transition_latency += ret * 1000;
 	}
 
+	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+	if (ret) {
+		pr_err("failed to init cpufreq table: %d\n", ret);
+		goto out_free_priv;
+	}
+
 	/*
 	 * For now, just loading the cooling device;
 	 * thermal DT code takes care of matching them.
@@ -277,7 +293,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.transition_latency = transition_latency;
 
 	pd = cpufreq_get_driver_data();
-	if (pd && !pd->independent_clocks)
+	if (!pd || !pd->independent_clocks)
 		cpumask_setall(policy->cpus);
 
 	of_node_put(np);
@@ -286,9 +302,9 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 
 out_cooling_unregister:
 	cpufreq_cooling_unregister(priv->cdev);
-	kfree(priv);
-out_free_table:
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_priv:
+	kfree(priv);
 out_put_node:
 	of_node_put(np);
 out_put_reg_clk:

kernel/power/hibernate.c

@@ -502,8 +502,14 @@ int hibernation_restore(int platform_mode)
 	error = dpm_suspend_start(PMSG_QUIESCE);
 	if (!error) {
 		error = resume_target_kernel(platform_mode);
-		dpm_resume_end(PMSG_RECOVER);
+		/*
+		 * The above should either succeed and jump to the new kernel,
+		 * or return with an error. Otherwise things are just
+		 * undefined, so let's be paranoid.
+		 */
+		BUG_ON(!error);
 	}
+	dpm_resume_end(PMSG_RECOVER);
 	pm_restore_gfp_mask();
 	resume_console();
 	pm_restore_console();