sh: Add support for SH7763 CPU subtype.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -265,6 +265,12 @@ config CPU_SUBTYPE_SH4_202
 
 # SH-4A Processor Support
 
+config CPU_SUBTYPE_SH7763
+	bool "Support SH7763 processor"
+	select CPU_SH4A
+	help
+	  Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
+
 config CPU_SUBTYPE_SH7770
 	bool "Support SH7770 processor"
 	select CPU_SH4A
@@ -551,7 +557,8 @@ config SH_MTU2
 
 config SH_TIMER_IRQ
 	int
-	default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
+			CPU_SUBTYPE_SH7763
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
 	default "16"

arch/sh/Kconfig.debug

@@ -29,7 +29,7 @@ config EARLY_SCIF_CONSOLE
 config EARLY_SCIF_CONSOLE_PORT
 	hex
 	depends on EARLY_SCIF_CONSOLE
-	default "0xffe00000" if CPU_SUBTYPE_SH7780
+ 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263

arch/sh/drivers/pci/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_PCI_AUTO)			+= pci-auto.o
 
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751R)	+= pci-sh7751.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_CPU_SH5)			+= pci-sh5.o ops-sh5.o

arch/sh/drivers/pci/pci-sh4.h

 #ifndef __PCI_SH4_H
 #define __PCI_SH4_H
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763)
 #include "pci-sh7780.h"
 #else
 #include "pci-sh7751.h"

arch/sh/drivers/pci/pci-sh7780.c

@@ -58,6 +58,7 @@ static int __init sh7780_pci_init(void)
 	id = pci_read_reg(SH7780_PCIVID);
 	if ((id & 0xffff) == SH7780_VENDOR_ID) {
 		switch ((id >> 16) & 0xffff) {
+		case SH7763_DEVICE_ID:
 		case SH7780_DEVICE_ID:
 		case SH7781_DEVICE_ID:
 		case SH7785_DEVICE_ID:

arch/sh/drivers/pci/pci-sh7780.h

@@ -16,6 +16,7 @@
 #define SH7780_VENDOR_ID	0x1912
 #define SH7781_DEVICE_ID	0x0001
 #define SH7780_DEVICE_ID	0x0002
+#define SH7763_DEVICE_ID	0x0004
 #define SH7785_DEVICE_ID	0x0007
 
 /* SH7780 Control Registers */

arch/sh/kernel/cpu/sh4/probe.c

@@ -98,6 +98,8 @@ int __init detect_cpu_and_cache_system(void)
 	case 0x200A:
 		if (prr == 0x61)
 			boot_cpu_data.type = CPU_SH7781;
+		else if (prr == 0xa1)
+			boot_cpu_data.type = CPU_SH7763;
 		else
 			boot_cpu_data.type = CPU_SH7780;
 

arch/sh/kernel/cpu/sh4a/Makefile

@@ -3,6 +3,7 @@
 #
 
 # CPU subtype setup
+obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= setup-sh7763.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
@@ -14,6 +15,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 smp-$(CONFIG_CPU_SUBTYPE_SHX3)		:= smp-shx3.o
 
 # Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o

arch/sh/kernel/cpu/sh4a/clock-sh7763.c

+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+ *
+ * SH7763 support for the clock framework
+ *
+ *  Copyright (C) 2005  Paul Mundt
+ *  Copyright (C) 2007  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
+static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 };
+static int p1fc_divisors[] = { 1, 1, 1, 16, 1, 1, 1, 1 };
+static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+	clk->rate *= p0fc_divisors[(ctrl_inl(FRQCR) >> 4) & 0x07];
+}
+
+static struct clk_ops sh7763_master_clk_ops = {
+	.init		= master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07);
+	clk->rate = clk->parent->rate / p0fc_divisors[idx];
+}
+
+static struct clk_ops sh7763_module_clk_ops = {
+	.recalc		= module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07);
+	clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7763_bus_clk_ops = {
+	.recalc		= bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate;
+}
+
+static struct clk_ops sh7763_cpu_clk_ops = {
+	.recalc		= cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7763_clk_ops[] = {
+	&sh7763_master_clk_ops,
+	&sh7763_module_clk_ops,
+	&sh7763_bus_clk_ops,
+	&sh7763_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+	if (idx < ARRAY_SIZE(sh7763_clk_ops))
+		*ops = sh7763_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+	int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07);
+	clk->rate = clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct clk_ops sh7763_shyway_clk_ops = {
+	.recalc		= shyway_clk_recalc,
+};
+
+static struct clk sh7763_shyway_clk = {
+	.name		= "shyway_clk",
+	.flags		= CLK_ALWAYS_ENABLED,
+	.ops		= &sh7763_shyway_clk_ops,
+};
+
+/*
+ * Additional SH7763-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7763_onchip_clocks[] = {
+	&sh7763_shyway_clk,
+};
+
+static int __init sh7763_clk_init(void)
+{
+	struct clk *clk = clk_get(NULL, "master_clk");
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) {
+		struct clk *clkp = sh7763_onchip_clocks[i];
+
+		clkp->parent = clk;
+		clk_register(clkp);
+		clk_enable(clkp);
+	}
+
+	/*
+	 * Now that we have the rest of the clocks registered, we need to
+	 * force the parent clock to propagate so that these clocks will
+	 * automatically figure out their rate. We cheat by handing the
+	 * parent clock its current rate and forcing child propagation.
+	 */
+	clk_set_rate(clk, clk_get_rate(clk));
+
+	clk_put(clk);
+
+	return 0;
+}
+
+arch_initcall(sh7763_clk_init);
+

arch/sh/kernel/cpu/sh4a/setup-sh7763.c

+/*
+ * SH7763 Setup
+ *
+ *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2007  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/io.h>
+#include <asm/sci.h>
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xffe80000,
+		.end	= 0xffe80000 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 21,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 22,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 20,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xffe00000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 40, 41, 43, 42 },
+	}, {
+		.mapbase	= 0xffe08000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 76, 77, 79, 78 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct resource usb_ohci_resources[] = {
+	[0] = {
+		.start	= 0xffec8000,
+		.end	= 0xffec80ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 83,
+		.end	= 83,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 usb_ohci_dma_mask = 0xffffffffUL;
+static struct platform_device usb_ohci_device = {
+	.name		= "sh_ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &usb_ohci_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
+	.resource	= usb_ohci_resources,
+};
+
+static struct resource usbf_resources[] = {
+	[0] = {
+		.start	= 0xffec0000,
+		.end	= 0xffec00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 84,
+		.end	= 84,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbf_device = {
+	.name		= "sh_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usbf_resources),
+	.resource	= usbf_resources,
+};
+
+static struct platform_device *sh7763_devices[] __initdata = {
+	&rtc_device,
+	&sci_device,
+	&usb_ohci_device,
+	&usbf_device,
+};
+
+static int __init sh7763_devices_setup(void)
+{
+	return platform_add_devices(sh7763_devices,
+				    ARRAY_SIZE(sh7763_devices));
+}
+__initcall(sh7763_devices_setup);
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+
+	IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	IRL_HHLL, IRL_HHLH, IRL_HHHL,
+
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	RTC_ATI, RTC_PRI, RTC_CUI,
+	WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+	HUDI, LCDC,
+	DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE,
+	SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+	DMAC0_DMINT4, DMAC0_DMINT5,
+	IIC0, IIC1,
+	CMT,
+	GEINT0, GEINT1, GEINT2,
+	HAC,
+	PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
+	PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
+	STIF0, STIF1,
+	SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+	SIOF0, SIOF1, SIOF2,
+	USBH, USBFI0, USBFI1,
+	TPU, PCC,
+	MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
+	SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
+	TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3,
+	SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+	GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3,
+
+	/* interrupt groups */
+
+	TMU012, TMU345, RTC, DMAC, SCIF0, GETHER, PCIC5,
+	SCIF1, USBF, MMCIF, SIM, SCIF2, GPIO,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
+	INTC_VECT(RTC_CUI, 0x4c0),
+	INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580),
+	INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0),
+	INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600),
+	INTC_VECT(LCDC, 0x620),
+	INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
+	INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0),
+	INTC_VECT(DMAC0_DMAE, 0x6c0),
+	INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
+	INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
+	INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0),
+	INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0),
+	INTC_VECT(CMT, 0x900), INTC_VECT(GEINT0, 0x920),
+	INTC_VECT(GEINT1, 0x940), INTC_VECT(GEINT2, 0x960),
+	INTC_VECT(HAC, 0x980),
+	INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
+	INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
+	INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
+	INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
+	INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
+	INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60),
+	INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0),
+	INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0),
+	INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20),
+	INTC_VECT(USBH, 0xc60), INTC_VECT(USBFI0, 0xc80),
+	INTC_VECT(USBFI1, 0xca0),
+	INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0),
+	INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
+	INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
+	INTC_VECT(SIM_ERI, 0xd80), INTC_VECT(SIM_RXI, 0xda0),
+	INTC_VECT(SIM_TXI, 0xdc0), INTC_VECT(SIM_TEND, 0xde0),
+	INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
+	INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
+	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
+	INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
+	INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
+	INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+	INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
+	INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
+	INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
+	INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+	INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+		   DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
+	INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+	INTC_GROUP(GETHER, GEINT0, GEINT1, GEINT2),
+	INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
+	INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+	INTC_GROUP(USBF, USBFI0, USBFI1),
+	INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
+	INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
+	INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+	INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3),
+};
+
+static struct intc_prio priorities[] __initdata = {
+	INTC_PRIO(SCIF0, 3),
+	INTC_PRIO(SCIF1, 3),
+	INTC_PRIO(SCIF2, 3),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
+	  { 0, 0, 0, 0, 0, 0, GPIO, 0,
+	    SSI0, MMCIF, 0, SIOF0, PCIC5, PCIINTD, PCIINTC, PCIINTB,
+	    PCIINTA, PCISERR, HAC, CMT, 0, 0, 0, DMAC,
+	    HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } },
+	{ 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */
+	  { 0, 0, 0, 0, 0, 0, SCIF2, USBF,
+	    0, 0, STIF1, STIF0, 0, 0, USBH, GETHER,
+	    PCC, 0, 0, ADC, TPU, SIM, SIOF2, SIOF1,
+	    LCDC, 0, IIC1, IIC0, SSI3, SSI2, SSI1, 0 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1,
+						 TMU2, TMU2_TICPI } },
+	{ 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } },
+	{ 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } },
+	{ 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC, ADC } },
+	{ 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC,
+						 PCISERR, PCIINTA } },
+	{ 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC,
+						 PCIINTD, PCIC5 } },
+	{ 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF0, USBF, MMCIF, SSI0 } },
+	{ 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } },
+	{ 0xffd400a0, 0, 32, 8, /* INT2PRI8 */ { SSI3, SSI2, SSI1, 0 } },
+	{ 0xffd400a4, 0, 32, 8, /* INT2PRI9 */ { LCDC, 0, IIC1, IIC0 } },
+	{ 0xffd400a8, 0, 32, 8, /* INT2PRI10 */ { TPU, SIM, SIOF2, SIOF1 } },
+	{ 0xffd400ac, 0, 32, 8, /* INT2PRI11 */ { PCC } },
+	{ 0xffd400b0, 0, 32, 8, /* INT2PRI12 */ { 0, 0, USBH, GETHER } },
+	{ 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, priorities,
+			 mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect irq_vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+	INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+	INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+};
+
+static struct intc_mask_reg irq_mask_registers[] __initdata = {
+	{ 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg irq_prio_registers[] __initdata = {
+	{ 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+					       IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg irq_sense_registers[] __initdata = {
+	{ 0xffd0001c, 32, 2, /* ICR1 */   { IRQ0, IRQ1, IRQ2, IRQ3,
+					    IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
+			 NULL, NULL, irq_mask_registers, irq_prio_registers,
+			 irq_sense_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect irl_vectors[] __initdata = {
+	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+	INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+	INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+	INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+	INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+	INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+	INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
+	{ 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	    IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+	    IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+	    IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+	    IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
+			 NULL, NULL, irl7654_mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
+			 NULL, NULL, irl3210_mask_registers, NULL, NULL);
+
+#define INTC_ICR0	0xffd00000
+#define INTC_INTMSK0	0xffd00044
+#define INTC_INTMSK1	0xffd00048
+#define INTC_INTMSK2	0xffd40080
+#define INTC_INTMSKCLR1	0xffd00068
+#define INTC_INTMSKCLR2	0xffd40084
+
+void __init plat_irq_setup(void)
+{
+	/* disable IRQ7-0 */
+	ctrl_outl(0xff000000, INTC_INTMSK0);
+
+	/* disable IRL3-0 + IRL7-4 */
+	ctrl_outl(0xc0000000, INTC_INTMSK1);
+	ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+	switch (mode) {
+	case IRQ_MODE_IRQ:
+		/* select IRQ mode for IRL3-0 + IRL7-4 */
+		ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+		register_intc_controller(&intc_irq_desc);
+		break;
+	case IRQ_MODE_IRL7654:
+		/* enable IRL7-4 but don't provide any masking */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL3210:
+		/* enable IRL0-3 but don't provide any masking */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+		break;
+	case IRQ_MODE_IRL7654_MASK:
+		/* enable IRL7-4 and mask using cpu intc controller */
+		ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl7654_desc);
+		break;
+	case IRQ_MODE_IRL3210_MASK:
+		/* enable IRL0-3 and mask using cpu intc controller */
+		ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+		register_intc_controller(&intc_irl3210_desc);
+		break;
+	default:
+		BUG();
+	}
+}

arch/sh/kernel/setup.c

@@ -319,10 +319,10 @@ static const char *cpu_name[] = {
 	[CPU_SH7750R]	= "SH7750R",	[CPU_SH7751]	= "SH7751",
 	[CPU_SH7751R]	= "SH7751R",	[CPU_SH7760]	= "SH7760",
 	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
-	[CPU_SH7770]	= "SH7770",	[CPU_SH7780]	= "SH7780",
-	[CPU_SH7781]	= "SH7781",	[CPU_SH7343]	= "SH7343",
-	[CPU_SH7785]	= "SH7785",	[CPU_SH7722]	= "SH7722",
-	[CPU_SHX3]	= "SH-X3",
+	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
+	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
+	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
+	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
 	[CPU_SH_NONE]	= "Unknown"
 };

drivers/serial/sh-sci.c

@@ -395,7 +395,8 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 	} else {
 #ifdef CONFIG_CPU_SUBTYPE_SH7343
 		/* Nothing */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780) || \
       defined(CONFIG_CPU_SUBTYPE_SH7785) || \
       defined(CONFIG_CPU_SUBTYPE_SHX3)
 		ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
@@ -408,6 +409,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 static inline int scif_txroom(struct uart_port *port)

drivers/serial/sh-sci.h

@@ -120,6 +120,12 @@
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
+# define SCSPTR1 0xffe08024 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001  /* overrun error bit */
+# define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
 # define SCSPTR1 0xff924020 /* 16 bit SCIF */
@@ -419,6 +425,7 @@ SCIx_FNS(SCxSR,  0x08,  8, 0x10,  8, 0x08, 16, 0x10, 16, 0x04,  8)
 SCIx_FNS(SCxRDR, 0x0a,  8, 0x14,  8, 0x0A,  8, 0x14,  8, 0x05,  8)
 SCIF_FNS(SCFCR,                      0x0c,  8, 0x18, 16)
 #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7763) || \
     defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 SCIF_FNS(SCFDR,			     0x0e, 16, 0x1C, 16)
@@ -588,6 +595,15 @@ static inline int sci_rxd_in(struct uart_port *port)
 	int ch = (port->mapbase - SMR0) >> 3;
 	return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe00000)
+		return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+	if (port->mapbase == 0xffe08000)
+		return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 static inline int sci_rxd_in(struct uart_port *port)
 {
@@ -698,7 +714,8 @@ static inline int sci_rxd_in(struct uart_port *port)
  * -- Mitch Davis - 15 Jul 2000
  */
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
     defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \

include/asm-sh/bugs.h

@@ -35,7 +35,7 @@ static void __init check_bugs(void)
 	case CPU_SH7750 ... CPU_SH4_501:
 		*p++ = '4';
 		break;
-	case CPU_SH7770 ... CPU_SHX3:
+	case CPU_SH7763 ... CPU_SHX3:
 		*p++ = '4';
 		*p++ = 'a';
 		break;

include/asm-sh/cpu-sh4/freq.h

@@ -16,7 +16,8 @@
 #define SCLKACR			0xa4150008
 #define SCLKBCR			0xa415000c
 #define IrDACLKCR		0xa4150010
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define	FRQCR			0xffc80000
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define FRQCR0			0xffc80000

include/asm-sh/processor.h

@@ -30,7 +30,7 @@ enum cpu_type {
 	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
 
 	/* SH-4A types */
-	CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
 
 	/* SH4AL-DSP types */
 	CPU_SH7343, CPU_SH7722,